I’m glad the video was helpful. Thank you for the kind words:)

Glad it helped!

@@JohnsonsSmallEnginesI on the STIHLs is ignition

👍

Hi Ron, I’m glad this video keeps on helping you!! Thank you for watching and commenting:)

I’m glad it was helpful and thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated :)

Great to hear!

Thank you for the kind words:)

FYI the standard on/off symbols are binary. 0 (Zero) is off. 1 (One) is on. :)

I’m glad it was helpful! Thank you for watching and the kind comment. Please give this video a thumbs up and tell your friends about my channel to help it grow. It would be greatly appreciated.

Glad to hear! Thank you for the kind comment.

I’m glad it was helpful. Thank you for watching and the kind comment.

I’m glad.this video was helpful!! Thank you for the kind words. Please give this video the thumbs up, subscribe and tell your friends to help my channel grow it would be greatly appreciated:)

Thank you! and appreciate your kind comment :)

Hi Joshua! I’m glad it was helpful and thank you for the kind comment:)

Thank you, I'm Glad it helped you!!

I’m glad it helped :) thank you for watching! and the kind words.

I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)

Thank you for watching and the kind comment. I’m glad it was helpful. Please give this video a thumbs up to help my channel. It would be greatly appreciated.

I’m glad it was helpful. Thank you for watching

I’m glad it was helpful and thank you for the comment :)

I’m glad it was helpful :)

If you only use your machine a few time a year?? I would recommend buying the already mixed fuel. Tru-Fuel makes a good fuel. Check them out online. .

I’m glad it was helpful, please give this video a thumbs up, subscribe and tell your friends to help my channel grow! It would be greatly appreciated:) thanks for watching.

I’m glad it was helpful, Please give this video a thumbs up and tell your friends about my channel to help it grow. It would be greatly appreciated.

Or o for OFF and I for IGNITE

@@alessandro4337 👍🏻 That’s how I remember.

I’m glad it was helpful and thank you for the kind comment!

I’m glad it was helpful, please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated, Thank you for watching:)

Stihl has two cycle oil or use equivalent.

Spark plug (resistorBosch WSR 6 F,type):NGK BPMR 7 AElectrode gap:0.5 mm

Thank you! I'm glad it was helpful and thank you for the kind comment.

I’m glad it was helpful. Please give this video a thumbs up to help my channel. It would be greatly appreciated :)

I’m glad it was helpful!

Yes they may be too tight.

I'm glad it was helpful and thank you for the kind comment.

Glad it was helpful. Please give this video a thumbs up to help my channel. It would be greatly appreciated! Thank you for watching:)

Thanks for watching and the kind comment! Please give this a like to help the channel. It would be greatly appreciated.

I’m glad it was helpful:)

The idle may be to fast or the blade clutch is bad.

@@JohnsonsSmallEngines Yea, ideal is bit high how I can down the ideal? Please advise me. Thanks

Yes, try a new spark plug or at least dry the old one out, then try and start it without choke and full throttle. Also make sure your air filter isn’t dirty or clogged.

@@JohnsonsSmallEngines ... It's brand new. But nobody ever showed me to do that half throttle shit where you lock it at half throttle and then choke it and then start it I never did it that way maybe that's the problem.

Glad to hear! Please give this video a thumbs up to help my channel and tell your friends!! Thank you for watching:)

I’m glad it was helpful!

The correct question should have been, “How old is the gas that was in the machine”? It’s not what kind of gas your using. Yes, non ethanol is the way to go and ASPEN two cycle already pre-mixed is even better. Yes, every one now is making there own fuel. If you can afford to purchase the already mixed gas(it is expensive), that would be the way to go. They also have fuel stabilizers in the fuel for a very long shelf life. Check out ASPEN. I am not affiliated or making any money from them but it is the best on the market in my opinion. I’m glad you were able to get it going!

I went to try to start it again and it won't start. Fuc# Stihl equipment 😡 Going back to Ace and have them start it for me.....again..😫 Ace said if it does not start after several pulls with the choke on,turn off the choke as it can flood the engjne.

easydoz1 no they don’t 😂😂😂 you pull on full choke tell it coughs then half tell it’s fully starts

It's odd because my manual says five pulls then off for both my trimmer and strimmer.

Hi Brad, I agree two cycle machines can be frustrating. Maybe try a battery powered machine?? The batteries are getting much better with holding a charge for longer run times.

I’m glad it worked for you:)

C M that’s what I thought too until I actually read manual and watched this awesome video, just follow the steps. After you positioned choke all the way forward and motor started kind of and died out switch choke position all the way back, it starts like magic.

I’m glad it was helpful! And thank you for the kind comment:)

@@JohnsonsSmallEngines bro real quick, you turn it off for 5 to 10 minutes walk to your next area. Do we still warm start it?

After running your machine for 5 plus minutes I would try starting it warm start up and if it doesn’t start then go to the cold start up.

@@JohnsonsSmallEngines bro another question on weed eater. Weed eating most the morning, took 30 min break. What position do you place the choke after 30 mins?

Hikaru WDM practice will ease it out for the buttons and with the pull force just go hard stihl is reliable and these machines last decades if cared for

go hard with it don’t pipe down on pulling it

@@rankoss3437 I will do! I've never used a trimmer before and the machine is brand new so I expected it to feel hard to start (as if the switch wasn't on or something) and I'll have to get over the idea of blades near me too! I know that STHIL are solid machines (it cared for like you stated) I just need to pull harder than what I'm used to (it's no bigger than the strimmers so I should get used to it soon).

What he didn’t say was, that there is an orange lever underneath, when it is pulled out it locks the flywheel and stops the blades from moving when you start it, when you have the engine running just press the lever back and you are ready to go..... an often ignored safety feature.......

@@mountfields where about is this lever? I can't seem to find it on mine. I can find the choke and the hold throttle button you push in on the side but that's it. Thanks in advance.

When your born with one hand you need to figure things out. I have a wrist which helps me bend my stub to hold the trigger. I hope this video helped you out:)

Thanks! I'm glad it was helpful and thank you for the kind words!

I’m glad it was helpful:)

No problem, it sounds like it helped you get it started! Thank you for watching, please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)

You solved the mystery. I was so in a hurry to purchase the Hedgetrimmer I totally forgot that it suppose to come with an Owners manual and I forgot to ask the salesperson about it. But you made my day👍

Hi Thomas, I’m glad it was helpful and thank you for the kind comment. Please give this a like to help the channel. It would be greatly appreciated.

Thanks

No I is for the start position

It is not letters, it is numbers representing binary 1 and 0, 1 meaning active High or on and zero meaning active low or off

@@PlayboyHZyou are probably right but I like my"simple" translation better.

👍

I’m glad it was helpful:)

Course they are. It's a tiny engine. Hardly going to be guzzling litres is it

Yes

Never mind, I saw the answer on the hand, like I said I didn't mean to be insensitive, I have all the safety gear ready, these things just make me nervous

It’s all good. I would want you to ask. If you watch my newer videos, I tell you what up in the beginning letting all know and my saying is”If I can do it so can you!”

@@JohnsonsSmallEngines me and my housewife neighbor both chopped the hell out of our hedges, lol, thanks for the advice on how to start this bad boy

Many thanks to all that commented I hope the video is helpful

Thanks, I was having a mental issue with that on the video :)

2 cycle engines can be a pain to start and this is why I made the video. I hope your up and running again.

I was born without my left hand.

Thank you, I’m glad it was helpful! Thank you for watching :-)

I'm glad it was helpful and thank you for the kind words.