HMS Beagle - The Making Of

No video

HMS Beagle - The Making Of

Рет қаралды 25,821

Күн бұрын

The scale of the model is 1:60 and it belongs at the OcCre series. The time I needed to make this model was approximately 6 months with hundreds of working hours. The cost was approximately 210 euros (without the display case). The varnish is gloss by choice because it "brings out" the wood, it's easier to clean, you cannot have any white spots and it looks better. You can see this as my trademark! To answer a typical question, yes, she will probably float, but you will never put her in water. Also this one won't be in my collection because i have build it for a good friend of mine.
This video comes in 4K and has 2 sequential parts, the 1st part is a photo montage (consist of more than 600 photos) of every step of the making and the 2nd part is a plain video showing the finished model.
The music tracks in this video with the order of playing are: American Idle ,Waltz of the Flowers by Tchaikovsky and Can Can by Offenbach.
The HMS Beagle was one of the most famous ships of its time for different reasons. The most famous of all they were without a doubt his journey of naturalistic research, captained by Commander Robert FitzRoy and with a young Darwin on board.
Launched in the Thames River on May 11, 1820, it was built by the Wollwich shipyards. In July of that same year, as part of the celebrations for the coronation of King George IV, it was the first ship to sail under the new London Bridge.
In total, the HMS Beagle made 3 great trips. It was not until his second trip, when Darwin embarked. Of the almost five years that this second expedition lasted, Darwin was three years and three months on land and eighteen months at sea.
Check out my personal recommendations from Modelers Central :
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Advanced
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Expert
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Tools
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Soldering iron amzn.to/3lu6jMj
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Dremel pack amzn.to/3sNzFts

Пікірлер: 142

@kevincleaver1999 2 жыл бұрын

I just want to say a massive thank you This has been my first voyage into wooden ship building and you have made the whole process and learning curve much easier and enjoyable. I have been on a break from my Beagle as I have been building a garden workshop for me to work in. yesterday I started on the bow sprit and your videos were invaluable. Thanks again and here’s to your next one. 👍🤩. John shows you that you CanCan yes you really CanCan go and get a kit today 😂😂

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words Kevin!!! I am really glad that i was able to help you! Do not hesitate to ask my help when ever you need it :) You will love the next one, i can insure you about that, gather some money because you will have expenses coming up!!!

@luisaraujo4708 2 жыл бұрын

Amazing! The combination of high gloss paint, unfinished brass, and fuzzy lines all contribute to a realistic toy-like appearance of the finished ship. Congratulations on another completed build!

@JohnsWoodenShips 2 жыл бұрын

Thank you so much Luis!!!😀

@sambuttigieg291 2 жыл бұрын

JOHN you make me spend a lot of money because of the beautiful models that you build. excellent job keep it up, John I LOVE IT.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Sam!!! Keep some spare because your are going to buy the next one too :)

@ralfweber7562 2 жыл бұрын

Congratulations John, she looks absolutely beautiful. I think you and Wolf deserve a rest before starting the new series. Can`t wait following your next project.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Ralf!!! I had 2 weeks rest, now tomorrow i will begin the next one and i can insure you that you will love it!!! But the unboxing video is scheduled for the 4th of December. :)

@keithkennedy-tyson8578 2 жыл бұрын

beautiful work, I guess that Fitzroy would have been impressed with such a lovely model of his vessel. Thanks for the great series.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Keith for your kind words!!! Yes he would have loved it :)

@twelverules176 2 жыл бұрын

Well done and thank you so much for taking us through the build process. It’s super impressive to see the final ship!

@JohnsWoodenShips 2 жыл бұрын

Thank you very much !!! I am glad that you liked the series :)

@moikehunt8928 2 жыл бұрын

Congratulations John on another fine model, looking forward to the next series. Thanks, as always, for sharing :-)

@JohnsWoodenShips 2 жыл бұрын

I am glad that you liked it Moike!!! I will be happy to see you with me with the next one!!!

@Reindeer911 2 жыл бұрын

This Reindeer approves! You really did a fantastic job, and it seems it went together really quick when considering what you were working with. Excellent work!

@JohnsWoodenShips 2 жыл бұрын

Thank you very much!!! Yes it was a bit quick but i had also 3 weeks of vacation time during this period :)

@billa2967 2 жыл бұрын

The HMS Beagle, a Cherokee class ship, (over 100 examples were built) was a very elegant design, and the Beagle was of course the most famous. Your build of it is absolutely gorgeous! Congratulations to you, for another masterpiece!

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Bill!!! If you liked this one then prepare your self for the next one, it's going to be epic!!!

@boblangenberg7859 2 жыл бұрын

Lovely work john, each time you have chosen a new kit I have questioned the choice because the new project didn’t strike me as better than the last. Yet after watching you build for several projects now I have come to realize that each of these vessels are stunning on their own. I didn’t think Beagle would be interesting after Montanes yet she is beautiful. In addition, and I hope I don’t sound patronizing, I think you as a builder are improving with each build. PerHaps that is Wolf’s influence😁 Keep it up John, I find your builds both fascinating and informative. It surely adds a level of difficulty to film and edit on top of an already complicated model. Yasou my friend,

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words my friend!!! Indeed every model has it's own beauty. I am sure that Wolf's management made everything happen :) Geia sou Bob!!!

@peterbuffel351 2 жыл бұрын

No doubt about it this is a masterpiece. Thank you John for taking us along on this build series. Looking forward to the next build series and the reveal you want to make early next month. Take care and stay healthy.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Peter for your kind words!!! The next one will be epic, i am sure that you will love it!!! Stay safe !!!

@keithcheeseman567 2 жыл бұрын

Hi John and Wolf, The Vienna waltz ..great choice of music. I honestly feel you are the best KZfaqr on this subject. The end product is amazing. I so enjoy your series and making of so much. Thank you.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words Keith!!! Check out the new project, you will love it!!!

@johnthompson133 2 жыл бұрын

I have for many years wanted to try serious model ship building. I have long been intimidated by the challenge but finally decided it was time and that the Beagle would be my first. I am so excited to have found your videos. Your demonstrations and explantions are invaluable. I look forward to this adventure and following along with you in the future.

@JohnsWoodenShips 2 жыл бұрын

Welcome aboard John!!! You will enjoy every build like it was your 1st one. And every time that you finish one you will have a feeling of incredible joy!!! Thank you very much for your kind words!!!

@michaelryan6884 2 жыл бұрын

Another masterpiece, John! Thanks for sharing the journey. Anxiously awaiting the next build.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Michael!!! The new project will begin today, but the unboxing will be released on the next Saturday the 4th of December :) You will love it !!!

@jerryrobinson7265 Жыл бұрын

Beautiful work Brother, l damn near started dancing through the garden for a few, but I must leave with this, God bless, and God speed, Shalom

@JohnsWoodenShips Жыл бұрын

Thank you very much Jerry!!!

@GregWilson635 2 жыл бұрын

magnificent as usual , John.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Greg!!!

@buckchoppers2480 2 жыл бұрын

Another triumph, John. You said that this model is for a friend of yours. They will be delighted. I'm looking forward to your next model ship build. 👍

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Buck!!! He has it already in his home and he loves it!!! The next one is going to be epic Buck!!! I have it in my hands and i will begin building it tomorrow but the unboxing video is scheduled for the 4th of December. You will love it!!!

@keranpower6805 2 жыл бұрын

John, thank you for this wonderful series. I have really enjoyed following you through each and every video and in the actual making HMS Beagle. My Beagle is nowhere near the standard of yours but is far far better than I could have done without your help. I am looking forward to making La Candelaria and I am hoping that it will be better again. I also enjoyed Wolf’s contributions. I have dogs and so I know just how important they can be to a family. Congratulations and many many thanks and of course I look forward to your next video. Keran

@JohnsWoodenShips 2 жыл бұрын

Hi Keran! Thank you very much for your kind words!!! Wolf is a necessity, he is managing everything, without him i would be able to perform that good! You will see La Candelaria but not just yet, the next one is going to be epic and i know that you will love it!!!

@keranpower6805 2 жыл бұрын

@@JohnsWoodenShips John, in making my next model, I would much prefer to follow your videos, so I will delay making La Candelaria until you are ready to do it. Am I right in thinking that you will do the Artesania Latina HMS Endeavour next, in which case I will order that one now so that I can start when you start? Keran

@JohnsWoodenShips 2 жыл бұрын

@@keranpower6805 You are awesome!!! I will make the Endeavour after the current project and La Candelaria after the Endeavour :)

@keranpower6805 2 жыл бұрын

@@JohnsWoodenShips Thanks John. I will order the Endeavour.

@COMIModelMaking 2 жыл бұрын

Wonderful model. Thanks for taking the time to record the build, it's a great help to see all the detailed process you go through. Keep it up, hope to see many more and congratulations on the beautiful result.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words!!! i hope to see you again in my next series that it's going to be epic!!!

@uwewegner7895 2 жыл бұрын

Hello John, this has become a masterpiece again - my respect for this beautiful work - I'm already looking forward to your next model 😀

@JohnsWoodenShips 2 жыл бұрын

Hi Uwe! Thank you very much for your kind words!!! You will love the next one, i can insure you :)

@johnreid3057 2 жыл бұрын

Love it. At 81 you have inspired me to keep going. I have ordered the "Terror" as my next build mainly because the museum that has my "Victory" already has a "Beagle." It is a very interesting ship with a great storyline that is of special interest to Canadians. I am using your info on the Beagle as a guideline to approximately how long it will take to build. At my age, I am lucky to retain my abilities to build except for my endurance. The building sessions are shorter as I get tired easily. It may take me twice as long, more than a year I suppose. Thanks for the inspiration. Cheers! John.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words John!!! You have many years ahead to create art!!!

@markhodge7 2 жыл бұрын

Beautiful.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Mark!!!

@joseenriqueriveraarrivilla2256 2 жыл бұрын

Buenísimo trabajo, lo felicito. Excelente Hobi Saludos desde mi bella Guatemala🇬🇹

@JohnsWoodenShips 2 жыл бұрын

Glad you enjoyed it, thank you very much!!!

@vermillionhugh 2 жыл бұрын

Magnificent John, bravo my friend 👏👏👏👏 Best wishes to you and Wolf. Hugh. 🇬🇧👍👋☕️☕️

@JohnsWoodenShips 2 жыл бұрын

Thank you very much 🥰

@brianwatson1965 2 жыл бұрын

Yes a bit late to this party............But beautiful work there John...building this one myself, so far enjoying it.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Brian!!! You will enjoy it to the last wood strip :)

@richardweiner6815 2 жыл бұрын

Gongrats on another excellent build.Wolf is a great manager and I’m sure your friend will love the ship. Eager to see the next build. I think OcOcre has the best kits.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Richard!!! Wolf is the best manager you can get! You will love the next one :)

@S_MannMann 2 жыл бұрын

Hello John (and Wolf)! Just want to add my congratulations and THANKS for sharing all of the videos that allow us to join you on your model building journey. These detailed videos are enormously helpful (and inspiring) to me as I work to improve my ship modeling skills! THANKS AGAIN! Looking forward to your next project! (Get Wolf a new ball?)

@JohnsWoodenShips 2 жыл бұрын

Thank you very much for your kind words!!! Wolf and i we are happy to have you with us in this hobby! You will love the next one, stay tuned because you will watch the unboxing this Saturday! I 'll get him one, i have it in my mind to do that :) That's the 2nd one you know :)

@richardbarriere4683 2 жыл бұрын

Nice work! I enjoy your videos and find them very useful in my current build of the Beagle.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Richard!!! I am glad that i was able to help!!!

@markroberts1324 2 жыл бұрын

Great work and series John. Thank you for your guidance through the building process. Just need to catch up with you now.😂 Looking at starting the Endurance next so if you can do that one as well, it would be fab. Take care and give Wolf a hug for me. 👍😎

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Mark for your kind words!!! You will have time, do not worry! I have 3 models to complete so i cannot promise at the time something about the Endurance, but i can promise you that you will love the next one!!!

@pureparkour6114 Жыл бұрын

It's something with the beagle that i like! Its so beautiful!👍👍

@josecarlosmello8969 2 жыл бұрын

Thank you for one more good job. Very beautiful ship. Regards.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Jose!!!

@joanmanueloliverovira4073 2 жыл бұрын

Precioso !!! Very nice ship !!!! Felicidades!!!!

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Joan!!!

@GS-hf6ds 2 жыл бұрын

Great series, look forward to many more.

@JohnsWoodenShips 2 жыл бұрын

Thank you very much!!! You are going to love the next one :)

@nigeldouglas1529 Жыл бұрын

Hi John, Many thanks for this series. I watched them all and leaned a lot from you. Please accept my donation as a thank you for all your hard work. I am currently building a Billing Boats HMS Bounty and would love for you to build it sometime so I can work alongside you. I am just about to start the hull planking. Anyway, my sincere thanks for the series. I will begin watching another of your series immediately. PS I watched your electrical videos to integrate into the stand and I ordered all the electrical parts required. I will place some LEDs into the Bounty. Thanks Again Nigel

@JohnsWoodenShips Жыл бұрын

Thank you very much Nigel for your kind words!!! I am glad that you found the series helpful and most of all the videos about the electrical connections! I am currently finishing La Candelaria and during February i will begin the HMS Victory from Billing Boats, this would be epic because not only i will throw on LEDs but also she will be the result of cooperation with Billing Boats, you must watch the series! Thank you again for your donation and if you'll need my help for any step of your build just ask me :)

@nigeldouglas1529 Жыл бұрын

@@JohnsWoodenShips Hi John, many thanks for your reply. I will do. Thanks so much and keep up the good work, you should be proud of yourself. Thanks again, Nigel

@andrewballr 2 жыл бұрын

Great job. It looks amazing. 👏

@JohnsWoodenShips 2 жыл бұрын

Thank you very much!!! 😊

@stevea2204 2 жыл бұрын

Thank you for the time and effort it must take to produce and upload these videos John. I bet it takes just as long (or longer) than building the ship. :O)

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Steve!!! It is difficult, just for reference, for a video of around 30 minutes i need 20-35 videos and i have to edit and fix them. For the 4K videos i need 2 days of editing, fixing, transforming and uploading.

@deanc2574 Жыл бұрын

Terrific series.. Thank you Johm

@JohnsWoodenShips Жыл бұрын

I am glad that you like it Dean!!! Check out the big ones, like the Montanes or Santisima and do not forget to check out the Titanic with the lights!!!!!!

@deanc2574 Жыл бұрын

@@JohnsWoodenShips I am working my way through the Montanes, Titanic is next ;)... Learning as ,much as I can ...

@JohnsWoodenShips Жыл бұрын

@@deanc2574 You will love the Montanes and the Titanic!!! 😊

@danielefelix6983 2 жыл бұрын

Grande lavoro come tutti i tuoi modelli!!!

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Daniele!!!

@ketohiker7040 2 жыл бұрын

Many thanks for putting the time & effort into producing your video output, it is invaluable to a complete novice such as myself & judging by the comments on the individual episodes to the wider modelling community also. I stumbled over your channel by accident and quickly developed an urge to build the Beagle. I also quickly realised upon watching the double Hull planking episodes that I was watching an undoubted craftsman with a great deal of experience and that I'd be biting off more than I could chew. I've therefore ordered the Polaris and plan an Xmas start. I intend to apply techniques you have explained into my build. Do you have any 'weathered' examples within your published videos or do you prefer the ships to look as 'new'? Again, thank you for the inspiring content, bringing people into this hobby that would otherwise find the challenge to daunting to contemplate. The additional time & effort for content creation is respected & appreciated.

@JohnsWoodenShips 2 жыл бұрын

I cannot thank you enough for your kind words!!! I really appreciate this comment!!! Thank so much!!! I like my ships to be new, so you won't find any weathering in my series. I am also welcoming you aboard to this amazing hobby. I my self believe that the hardest parts of the modeling are the wooden sail ships and dioramas. You will make many mistakes, do not worry about that, that's the idea, that 's how you will learn. After 2-3 models you will see how you have evolved and you will be able to make works of art! In any case if you'll need any help do not hesitate to ask me :) Thank you again!!!

@axel4971 Жыл бұрын

Ottimo lavoro !!! Preciso e ben riuscito, veramente tanti complimenti.

@JohnsWoodenShips Жыл бұрын

Thank you very much Axel!!!

@AhmetAygit 2 жыл бұрын

very nice John...

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Ahmet!!!

@Occre 2 жыл бұрын

Fantastic!!!! 😍😍

@JohnsWoodenShips 2 жыл бұрын

Thank you very much!!! 😄

@Georgeolddrones 2 жыл бұрын

Excellent job John Been watching the videos John but not commenting much mate not been too well but okay. now onto the next one what have you got for us👍🙏🐕🐕

@JohnsWoodenShips 2 жыл бұрын

Thank you very much George!!! I hope that you are healthy and to be well soon! I have something pretty good, you' ll have to wait a week to find out :) I promise that you will love it :)

@chrismonson3581 Жыл бұрын

Beautiful Job!!

@JohnsWoodenShips Жыл бұрын

Thank you so much 😀

@AmbersCorner2.0 2 жыл бұрын

Hi John. Most excellent work. Hi WOLF!!!!!! !!Just received my HMS BEGLE today. Currently. I am just starting the SUTTER CUTTY about 52 inches long. By a company called Billing Boats. The instructions are very difficult. Parts are not cut right. No videos anywhere on this. Anyway. Congrats on your ship completion. I have spent many hours with you. My wife makes fun of me… Jerry. Ps my wife and I share a untuned…

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Jerry!!! You will enjoy building her and i am sure that your wife will love the outcome!!!

@AmbersCorner2.0 2 жыл бұрын

@@JohnsWoodenShips ohhh yes!!! She laughs because I constantly talk to you and wolf!!!! I also say….. K GUYS…. I GET BACK TOO YOU

@AmbersCorner2.0 2 жыл бұрын

We all watch you all day everyday while I work on my ship… if you and Wolf could give me a shout out in your next video that would be awesome!!!! JERRY, AMBER AND MY 10 YEAR OLD DAUGHTER ALIYAH IN THE UNITED STATES FROM YOU AND WOLF!!!!!???

@JohnsWoodenShips 2 жыл бұрын

@@AmbersCorner2.0 I will! But the video that you will hear that is the video of the construction of the skeleton of my next project because the unboxing is already done :)

@AmbersCorner2.0 2 жыл бұрын

John… my wife just ordered me the La Candelaria from OcCre. It will be here next week December 2nd… very excited to start this project with you and Wolf!!!! I had to temporarily close my business and now building ships… thank you for everything… Jerry Hart

@daviddini30 2 жыл бұрын

Thanks John for sharing such a great build with us. I watched every episode and thoroughly enjoyed all of them. Question - I am from Chicago and have many Greek friends here, and you speak better English than many of them. Where did you learn to speak such good English?

@JohnsWoodenShips 2 жыл бұрын

Hi David!Thank you very much for your kind words! When i was a kid i went 7 years to private school ,from there i've learned the basics. When i was in my teens i was watching my favorite tv show , Married with children. There i had the problem that the translation in the subs wasn't correct and many times the joke came 1st and the subs took ages. So i decided to watch it without reading the subs. That was the beginning, then through many movies,series and pc games i formed the accent and the way you are hearing me :)

@robertsalanon2909 Жыл бұрын

Tout est superbe ...

@JohnsWoodenShips Жыл бұрын

Thank you again my friend!!!

@RossPotts 2 жыл бұрын

@John Aliprantis, Very inspiring to see the finished product. I ordered this one, but I’ve also gotten a few lower skilled boats to learn on first, before tackling the Beagle. Are there any areas to pay most attention to? Any troublesome more than others?

@JohnsWoodenShips 2 жыл бұрын

It is an easy model, the difficulty on this model is the rigging, not enough space on the deck to tie the ropes. Also you have to be very careful with the painting, the white is a difficult color. The hull is pretty easy and the deck also. You will enjoy this one!

@jeanlignereux275 2 жыл бұрын

Hello John A simple question:what reference for your glue with a a nice thin tube to apply it very precisely?I looked on internet but did not find exactly the same product...

@JohnsWoodenShips 2 жыл бұрын

Hi Jean, here is the glue : www.super-hobby.co.uk/products/KLEJ-CYJANOAKRYLOWY-CA-RZADKI-20g.html and here are the little tubes : www.super-hobby.co.uk/products/Dozownik-do-klejow-CA-PVA-UV-10szt..html

@jeanlignereux275 2 жыл бұрын

@@JohnsWoodenShips many Thanks Friend😍have a nice weekend,and a pat to Buddy of course!

@btcbob11392 5 ай бұрын

Do all the metal parts and fittings come with this kit or are those "add on's|" that you have to buy. ?

@JohnsWoodenShips 5 ай бұрын

Everything comes with the kit.

@dmitriygomonov1090 3 ай бұрын

hi, I bought an old ship whose construction boards are very old and very stiff, it feels like they are about to crack, how can I return them to flexibility for construction?

@JohnsWoodenShips 3 ай бұрын

Hi Dimitri, use water and if you can warm water to soak the boards a bit before use.

@dmitriygomonov1090 3 ай бұрын

@@JohnsWoodenShips what if you soak it in linseed oil?

@JohnsWoodenShips 3 ай бұрын

Water will dry and won't affect the gluing, the oil won't dry and you might experience problems with the gluing.

@rameshgopalan 2 жыл бұрын

Hello, great video, i am just getting started, any suggestions for the varnish/stain on the top deck?

@JohnsWoodenShips 2 жыл бұрын

Welcome aboard! Thank you very much! I like gloss, clear gloss varnish that is. You can use what ever suits you best. For the deck is better not to use stain, just clear varnish. If you use gloss buy one that is made for sea or yachts.

@rameshgopalan 2 жыл бұрын

@@JohnsWoodenShips thank you, your videos make me want to make all the models you show, now I know my plan for rest of my life )

@LauraDelvecchio 6 ай бұрын

Hello friend, Really enjoyed your video on this model! I've been eyeing it for a long time haha. I do have one question though, hopefully it isn't too silly but I'm seriously at such a loss right now lol, what on earth are those tacks you used with the yellow heads at 3:40 in the video? I have searched and searched and cannot find these at all. Do they have a specific name? I'm coming up on the planking for my ship now and I'd love to have some of these to help the journey. Thanks for uploading! :D

@JohnsWoodenShips 5 ай бұрын

Hi Laura! I am glad that you liked it! These are modeling pins and i have bought them from Amazon over 10 years ago. try to do a Google search using these sentence : Graupner 717 - Stoßnadeln

@LauraDelvecchio 5 ай бұрын

@@JohnsWoodenShips thank you tremendously! I’ll search for them asap. :) thank you again! And when I get my Beagle, I’ll be referencing your video for sure lol

@hachmiboualem8339 2 жыл бұрын

عمل رائع وجميل جدا

@JohnsWoodenShips 2 жыл бұрын

Thank you very much Hachmi!!!

@dennistrue6473 11 ай бұрын

Morning John. Say hi to your dogs for me. You copper plated the HMS Victory What tools did you use to the cut the plates. How much were they and from who?

@JohnsWoodenShips 11 ай бұрын

Hi Dennis, watch the videos of the copper plating, you will get all your answers.

@michaelhewlett887 2 жыл бұрын

Hi John , G/day wolf . have not started mine yet . looking at the guns agree with you on deck they dont look right . Just asking would it be possible to change positions ports open guns out????

@JohnsWoodenShips 2 жыл бұрын

Hi Michael, yes you can but you do not have enough cannons for all the gunports...

@michaelhewlett887 2 жыл бұрын

@@JohnsWoodenShips True thanks John

@michaelhewlett887 2 жыл бұрын

@@JohnsWoodenShips Found a place here that sells cannons of all sizes . have 35mm same as on the Beagle might get then and see how l go , fingers crossed

@JohnsWoodenShips 2 жыл бұрын

@@michaelhewlett887 You also need cannon bodies and wheels.

@michaelhewlett887 2 жыл бұрын

@@JohnsWoodenShips All in 1 unit