These are a few of the ways I've modified my boat over the years to make it work better for me. MinnKota Edge: amzn.to/3RTf02G BeaverTail Boat Blind: amzn.to/3tSG2iJ
Пікірлер: 49
@drumminsonlive91996 ай бұрын
That’s an awesome boat dude I am just getting started on mine a 16 foot 1981 sea nymph with a 1998 40 hp evinrude. I have always had heavier fiberglass center consoles so this is all new to me but I’m looking forward to the whole new experience. Thanks for sharing …
@BadAtHunting6 ай бұрын
Thanks man. I hope you enjoy your new boat.
@HeartlandMakesAndOutdoors5 ай бұрын
That Grip tape is a great idea brother, I love it. LEDs a must as well. I watched one of your review videos and I didnt comment, but you did a great job painting this boat sir. Nicely done. Gold wheels look fun as well. You have done a great job with your build sir. I love what you have done. I would love to buy a gun box, the one I am looking at does not come with one and I have not found one to purchase separately, no rush for the time being, I have not made a purchase yet, still tossing it. Yes sir, I can see needing to move the long stern light somewhere else, especially if it blocks half the versa track. Those LEds running around the inside of the boat look great as well, do they attract bugs? Does the boat not come with a motor stabilizer bar? or what ever it is called,? Thanks for sharing brother, I will, if the Good Lord approves, be posting some on my new rig soon as well. New sub here also brother, Keep up the fun videos. Dale
@BadAtHunting5 ай бұрын
Thanks man. I looked at your channel too, pretty cool.
@HeartlandMakesAndOutdoors5 ай бұрын
@@BadAtHuntingThank you for the kind words, hopefully be doing some more fishing this year, I have changed a few things around in my life and trying to get set up to be out more often. have a blessed week. Dale
@mikeshive4985 Жыл бұрын
Thanks for great info. It looked like your bunks do not extend past transom. Make sure they extend 1-2 inches. I didn’t on similar boat and cracked the bottom where transom meets bottom. Lots of vertical load especially when bouncing down rough roads.
@BadAtHunting Жыл бұрын
Thanks for the feedback.
@kentsatterfield6617 Жыл бұрын
Nice boat man!
@BadAtHunting Жыл бұрын
Thanks man, it’s a work in progress still. They’re solid boats though and a good platform to build off of.
@brianstephens61089 ай бұрын
Good info. Thanks, man.
@BadAtHunting9 ай бұрын
Glad it was helpful!
@mattford5685 Жыл бұрын
Nice job.
@BadAtHunting Жыл бұрын
Thanks man.
@wesleylee16234 ай бұрын
Do you use the sponsons on the back to reboard your boat when duck hunting shallow or fishing shallow water?
@BadAtHunting4 ай бұрын
Yes I do, but they say you’re ‘not supposed to.’ They’re welded on pretty strong. My kids, dog, and I use them to get in and out.
@AgPilotDavidBАй бұрын
I’m looking at this boat what top do you have for it?
@BadAtHunting16 күн бұрын
If you’re asking about the Bimini- nothing special, just an Amazon find. The hunting blind (which I’m not sure is in this video) is a beavertail 1600.
@garybolser69697 ай бұрын
Nice video! Question, what was the deciding factor for tiller vs cc maybe? Curious and looking to make a purchase, mahalo
@BadAtHunting7 ай бұрын
Thanks man. I wanted a tiller because I like having the open floorplan.
@timcleavenger633311 ай бұрын
Hey buddy. First wanted to say great video. I have a grizzly 1648. I think I bought the same lights for my boat and am about to cut them in. I wanted to ask about your lights you cut in. Do you think they would work under the water ? Thinking about cutting them in the side of my pods and under the waterline . How are yours holding up? I want to put a few under the waterline.
@BadAtHunting11 ай бұрын
You might be able to put them below the waterline. I didn’t because I don’t trust my ability to waterproof everything. I also used cheaper led lights. It could look really good having them on your pods, but I wasn’t sure how I’d run the wiring to them either. Good luck. I hope it turns out.
@user-ox6jv4hv5r Жыл бұрын
Looks good! What stern saver did you use, and what did you use to attach it?
@BadAtHunting Жыл бұрын
I believe the brand name was called “Stern Saver” - and it attaches with a high strength marine glue. It all comes together as a kit, with mounting instructions.
@joshwarren2958 Жыл бұрын
Do you have a video on when you painted it? I am thinking of painting my 1648
@BadAtHunting Жыл бұрын
I started to make a video for it, but painting it was so labor intensive - I gave up trying to record everything. What I can say though is I used stencils from Red Leg Camo (on Amazon). I bought two set of every pattern I liked, in the largest size they had available. I used ultra matte spraypaint. I did one layer of stencil at a time, starting with the biggest blocks of color first, then moving on to the smaller stencils. Hope that helps. Let me know if you have more questions.
@endofdaysbroadcast848611 ай бұрын
Are those rod lockers add on aftermarket and where can I buy them or are they manufacturer installed?
@BadAtHunting11 ай бұрын
Yes, one side is rod storage, the other side is a gun locker. They came factory installed on the boat. I’m not sure if anyone makes an aftermarket version.
@brandonwayne3759 Жыл бұрын
Hey I have the exact same boat and am looking to do some of the same modifications that you have done. I was wonder mainly how you ran your electrical from the trolling motor and lights and what the electrical panel at the back were your turned on your LEDs is called
@BadAtHunting Жыл бұрын
I ran the wiring for all the electrical along the bottom of the boat next to the factory wiring. There is a channel underneath the flooring where you can put the cables. If you look at it a little bit, you’ll see what I’m talking about. The panel that controls most of the electrical stuff was there from the factory. I did have to add two switches that I bought off of Amazon, for the led lighting. Those come with a wiring diagram, and weren’t too difficult to instal. I’m not sure I answered your question right, so if I didn’t - let me know. :)
@BadAtHunting Жыл бұрын
I’m not sure the exact name of the panel, since it was there from the factory, but as you know there are lots of Switch Panels available online. They all, pretty much, do the same thing.
@way75mit9 Жыл бұрын
hey bro can you advise the name of the wire clips you used on your boat , and where you found them please ?
@BadAtHunting Жыл бұрын
Yeah man. I got them on Amazon. You can search ‘Cable Clips’ - the brand I got was XIAOXI. They’ve been working out good for me the last two years. Hope that helps.
@joshuahearn3555 Жыл бұрын
Thanks for the video dude! I’m looking to buy a 1654 for duck hunting, what’s your take on the motor? How does the 25 treat you and if you could do it again, would you change anything? Thanks dude!
@BadAtHunting Жыл бұрын
I like the boat in general. With what you get for the price, it’s a good deal. I’m not sure I’d change anything. The motor is fine- if you’re just using it to get from one place to the next. It tops out at around 25mph, depending on the load. The one thing I might do differently is buy a larger duck blind for it. I bought the beavertail 1600, but I’d probably go for the larger 1700, just to cover more.
@mackbeasley713 ай бұрын
WHERE YOU FIND YOUR TRANSOM SUPPORT
@BadAtHunting3 ай бұрын
The transom saver for the outboard motor was from Amazon, but I think certain Walmart’s carry them too.
@mackbeasley713 ай бұрын
@@BadAtHunting APPRECIATE IT
@BadAtHunting3 ай бұрын
No problem man. Good luck.
@mackbeasley713 ай бұрын
@@BadAtHunting 10-4
@andrewwiggins3568 Жыл бұрын
Did you install the pods on back? Where did you get them? Thanks Andrew
@BadAtHunting Жыл бұрын
Fortunately for me I didn’t have to install them, the boat came like that from the factory. I do know Beavertail makes some that they sell on their website. They even offer different sizes to ensure the proper fit on your boat. Hope that helps.
@user-mq2zl8km6z6 ай бұрын
Did you paint it your self or did you get it that way ?
@BadAtHunting6 ай бұрын
I painted it myself. If you’re interested in seeing how I did it, I’m working on a video now of ‘how to paint camo’. It should come out in the next month.
@user-mq2zl8km6z6 ай бұрын
@@BadAtHunting sound good looking forward to seeing it
@zacharylamantia8280 Жыл бұрын
What tac did you use?
@BadAtHunting Жыл бұрын
I can’t remember the name brand, but I bought it off Amazon. It was the highest rated one I could find. I really got it just to keep track of the hours on the motor.
@terrydaugherty6377 Жыл бұрын
Looks like a good vid but can’t handle the music in the background
@BadAtHunting Жыл бұрын
Thanks for the feedback. This was one of the first videos I ever edited- so I hadn’t figured out the right volume of music to overlay. Hopefully the new ones are better.
@terrydaugherty6377 Жыл бұрын
@@BadAtHunting don’t get me wrong I wasn’t being negative just hard to watch vid. Nice set up tho.