Tracker Grizzly Jon Boat UPGRADES!

Tracker Grizzly Jon Boat UPGRADES! | Step by Step Mods

Рет қаралды 125,656

Жыл бұрын

TRACKER GRIZZLY JON BOAT UPGRADES!
STEP BY STEP MODS
⚡️⚡️⚡️
At Waterland Fishing Optics, use code "BRIGADE" at checkout for 15% off your order.
www.waterlandco.com/
Use code "BRIGADE" at checkout at the TBNation site, the one stop boat building shop, for 5% off your entire purchase.
tbnation.net/
Use code "BRIGADE" at checkout to save 10% off your entire order from 6th Sense.
6thsensefishing.com/
⚡️⚡️⚡️
PARTS LIST
TBNation Graph Tower - tbnation.net/products/graph-m...
Battery Trays - amzn.to/3GV9fNW
60 amp Circuit Breaker - amzn.to/3u9uoMR
USB/ Voltmeter- amzn.to/3UyXK2O
Fuse Box - amzn.to/3OT0eXN
Heat Shrink Butt Connectors (red, blue, yellow) - amzn.to/3GgBk1W
Crimp Tool- amzn.to/3UGsEX6
Battery Terminal Kit- amzn.to/3UUEaOj
⚡️⚡️⚡️
Welcome back to another video! The project at hand is a Tracker Grizzly aluminum jon boat. This project was filmed back in May of 2022. The aluminum jon boat came through for some serious upgrades in the form of five Tracker lithium batteries, two Minn Kota on board chargers, a Hummingbird Apex 13 graph mounted on a TBNation Outdoors graph mount, a 36 volt Minn Kota Ultrex, and some wiring rehab! In this 30 min video, I will breeze through, step by step, the process of getting all this new equipment in the jon boat.
This boat is used for electric only reservoir fishing here in Georgia, so of course we will be installing a lot of juice! I add some wiring, a usb volt meter, install batteries and trays, mount a few Minn Kota on board chargers, build a custom battery tray for underneath the front deck, hook up the Apex 13 graph, mount the TBNation graph mount, mount the Minn Kota Ultrex, as well as some other fine details! I'll show you a quick overview of the process step by step as well as some tips and tricks along the way. I also show tools and techniques required to do the job.
All in all, this 17ft Tracker Grizzly left set up right to take on some electric only lakes, without doing a complete gut and rebuild. But not to worry, more on that later!!! 👀
__________________________________________
FIND ME ON SOCIAL MEDIA-
Tik Tok-
brigadeboats
Instagram: invitescon...
or adubjones
Facebook- / brigade-boats-10071137...

Пікірлер: 104

@StanfordMack-le6cg 11 ай бұрын

Two years later this motor is going strong kzfaq.infoUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite

@ryanpurchase332 Жыл бұрын

Love that you pay such attention to simple details to make thing so tidy, tight and clean. Your videos rock!!

@AXNJXN1 Жыл бұрын

VERY nicely done!! Great design, communication and kept it on point. Sharp!!

@timethious54 Жыл бұрын

Excellent appointments, Fantastic work !! That's an impressive electric bass boat ! ❤

@donpreller484 Жыл бұрын

I &Ave the same boat. Started with a simple build like that . Went to a full custom build last year. Decks storage , rod box etc.your work is above and beyond anything I could do. I thought and you may already know this, when you do the full build if you move the batteries more towards the center of the boat you will get more speed and efficiency from the electric outboard. I've fished electric only lakes for about 30 years. Not a huge difference but every little bit helps in these boats. Love your work. If I had your skills I would love to customize my rig even more.

@AnthonyJonesBrigadeBoats Жыл бұрын

I'm not sure what the end game plan will be. The boat may eventually get an electric outboard and unfortunately with those you are limited to keeping the battery within relative distance to the outboard. Distributing weight definitely helps, we will just have to pick and choose what the pros and cons are of the different design options.

@donpreller484 Жыл бұрын

My last boat I ran a 48 volt ray motor with lead acid . Currently running a torqueedo 6.0 with lithium. Weight distribution was high more critical with lead. But then some of our lakes are 3000acres so range and speed are important

@michaelbush7732 Жыл бұрын

This guy a 100% professional I love the work and I love his concern about all the wires being in the right place. Good work!

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks for the kind words!

@BrianWarr33 Жыл бұрын

Simple but great build. You do amazing work. Looking forward to the full build in the future.

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks man. Definitely a clean little rig. The build out will be nice im sure when we do it.

@billwallenstein3387 4 ай бұрын

Always remember; if it burns down they’ll only remember the last guy who was wiring. Excellent work as always!

@camaro6810 Жыл бұрын

Keep making those detailed videos man, you do a great job explaining things and showing tips and tricks, I mentioned it in one of your last videos, I really enjoy watching, thanks!

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks so much man! I definitely will I really appreciate he positive vibes and support! Catch you on the next one!

@jimcrowley1709 9 ай бұрын

Great video and details. The only thing I'd add is that the wires and batteris be labled so when batteries are removed theirs no confusion putting it back together. Even as an electrical guy myself, it's easy to get confused when your mind is on fishing!

@maverickmisenko7234 Жыл бұрын

Love everything you do here on this channel and you have quickly moved to the elite category of tiny boats! Also really love the milwaukee tool wall and I think we should get a shop/garage tour. Keep up the great work man

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks man! I have definitely been working on my craft over the past few years and have been blessed with people who trust and believe in me to do their projects. Definitely with bigger budgets than I ever had on my personal projects, which is really really cool. I'd like to do a full shop/garage tour one day, it's currently still a work in progress but slowly and surely getting there. When i get free time here or there i wirk on the work space, when i get extra money, i try to invest in newerand better tools. Thanks for watching

@timisoutdoors 10 ай бұрын

Dude. This is a master class. I love the innovation and explanations. I think I'm sold on building one of these!

@AnthonyJonesBrigadeBoats 10 ай бұрын

Hey man, i really appreciate the feedback! Good luck on your project should you take one on!

@drkronkron3061 Жыл бұрын

Nice Job Cousins! I’m ready when you are captain! I would love to get my boat done up by you!

@AnthonyJonesBrigadeBoats Жыл бұрын

Hey man feel free to DM me on Facebook, Instagram, or email at brigadeboats@gmail.com I do currently have a long wait but its always good to get a conversation started!

@kvn826 Жыл бұрын

With all the super in depth builds you guys do, I still enjoy a simple (ish) set up here. Tough to say simple with those batteries and that graph lol

@AnthonyJonesBrigadeBoats Жыл бұрын

Me too man. I miss tge less is more stuff. Been buried in customer full builds in 2022! Hopefully in the future i can set aside time for some simple and clean projects.

@SolarSun-wp6oh Жыл бұрын

I have built quite a few solar batteries and it is so much cheaper to buy eve lipo cell's here right above Atlanta you can build a very nice 7kw battery for under $1500 and you will have power for days

@GreatB1100 Жыл бұрын

That custom battery tray is sick man! Well done sir.

@lugnutzz75 Жыл бұрын

awesome, a true artist at these installs and custom builds. i wish tracker made that boat in a 60in bottom. her graph costs more than my entire rig!

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks man..Yeah 60 inch would be something else! No doubt, very costly but nice graph!

@BrownBaitCo Жыл бұрын

can not wait to see what you do next!

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks buddy!

@tonyaschob2830 Жыл бұрын

Great video!

@AnthonyJonesBrigadeBoats Жыл бұрын

Thank you!

@anotherezone7891 5 ай бұрын

Nice build!

@AnthonyJonesBrigadeBoats 5 ай бұрын

Thanks!

@pondgators Жыл бұрын

Awesome video! Your channel looks really cool!! Just subbed too!👍

@theoduff9517 9 ай бұрын

Bruh you did a great job on this project 😊

@AnthonyJonesBrigadeBoats 8 ай бұрын

Thank you! 😊

@tbnationoutdoors-nateeckhold Жыл бұрын

So nice cuz. And loving the new 🎤 😮

@AnthonyJonesBrigadeBoats Жыл бұрын

Mic game strong now cuz. On a whole new level now 👀

@atanner53 9 ай бұрын

Very nice work.

@AnthonyJonesBrigadeBoats 9 ай бұрын

I appreciate it 👊

@Last.Cast_FL Жыл бұрын

Great video man. Where’d you get that mountable plug cover for the battery charger in the back of the boat? Love it. Those little tidbits you produce are legit.

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks man..Minn kota actually included those with their chargers! Pretty cool i thought. You definitely get what you pay for in most cases.

@ralphcantrell3214 Жыл бұрын

Very nice rig, sir! That boat should last you a lifetime with nothing more than an occasional accessory replacement here and there. I bought my Fisher 16.5 foot aluminum deep vee with a 50 HP 4-stroke new in 2002, and she still serves me well. As a matter of fact, considering the cost of used boats these days, she would probably be worth 75% of what I paid for her back then. The best advice I can give you is to unplug the gas line and run it out of gas every time you take her out of the water. I learned this about 10 years ago, and my carburetors have worked flawlessly since. Before that however, I was having to rebuild them every other year.

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks for the kind words, the Grizzly is a great boat!

@sherlockbonez 10 ай бұрын

I was wondering why ypu have so many batteries then i notice the trolling motor in the back 😂. Is the bracket for the bow mount factory?

@FranksDIY Жыл бұрын

Awesome rig

@AnthonyJonesBrigadeBoats Жыл бұрын

Thank you!

@metal75801 Жыл бұрын

The boat in the video shows a front mounting location for a trolling motor, but the tracker website pics of this boat don't show it. Why?

@MarcCobb98 Жыл бұрын

What was that anchor and how do i find one

@admobeer9551 8 ай бұрын

As a fellow tinkerer, i enjoyed this. +1 subscriber

@AnthonyJonesBrigadeBoats 8 ай бұрын

Awesome, I appreciate the support!

@DBL72 Жыл бұрын

Hey Why didn't you re run the power wire underneath the floor ? There is a center channel that runs from the front to the rear under the flooring. It would have gave it a cleaner look. Ive done two tracker grizzly 1448 and currently tracker 1754 side console.

@decoplateorders Жыл бұрын

Agree. You can also run them through the Versa-Track too...

@mikehughes8023 Жыл бұрын

What is the average turnaround time for a full build on a 1754?

@steelerfaninerie Жыл бұрын

I enjoy your videos.

@AnthonyJonesBrigadeBoats Жыл бұрын

Glad you like them! thanks

@georgewilder8273 Жыл бұрын

Do ur costumes resell there old parts like trolling motors or fish finders, I love to fish but don't have much money for new equipment

@c.shoefish Жыл бұрын

Two things to critique if I may...from my experience I suggest: 1. For the battery terminals, instead of buying the multi assortment (I know with assortment packs I always end up not using a lot, which means waste) maybe figure out exactly what you use (i.e. 8 awg- 5/16", 6 awg -3/8" etc) and just buy those sizes in bulk (same goes for ring terminals...you can buy them in all sorts of hole sizes) 2. For the trolling plug, I can almost guarantee if it is the stock plug, it is not rated for 36v system, if it is, great. If not, that's a big electrical problem, and can cause major issues. Another badass video bro, keep up the good work

@AnthonyJonesBrigadeBoats Жыл бұрын

Most definitely appreciate insight and a well thought out comment. As far as the terminals, you are right, if your just doing one variety may not be needed. I feel its a good bang for your buck, especially if you are unsure of the exact sizing. I buy the kits and individually, I actually now have a whole tub of electric connections because I do so many boats, so it makes sense to me.. As far as the plug, that definitely is something to look out for. My understanding is that this one is acceptable, it is made by a company called MarineCo and was purchased as an acter market plug for the original trolling motor install. This video was actually filmed in May earlier this year and no issues occurred with it. I definitely don't want any issues nor do I claim to know it all so i appreciate definitely the advice and always welcome helpful constructive criticism!

@c.shoefish Жыл бұрын

@@AnthonyJonesBrigadeBoats absolutely, if you're unsure, or just want an assortment because of different projects, the kits are the way to go. The marineco plugs are solid so I'm sure it's fine. Thanks for not taking offense to what I said, there's so many people nowadays that take offense to criticism.

@AnthonyJonesBrigadeBoats Жыл бұрын

@C.Shoe86 yeah man no worries at all. I'm still learning new stuff often. I'd hope to be learning until the day I die. The ones that take offense to an actual inciteful comment are usually people who need to be humbled. Even the best at something can always learn more. I know a lot but never claim to know it all. Mistakes will be made even if I aim for a high level of quality. Learn, move on. We live in a world where people react instead of respond. Too many know it alls out there who think they are above learning anything from anyone and just want to show off to the world how great they are to feel validated. That ain't me.

@c.shoefish Жыл бұрын

@@AnthonyJonesBrigadeBoats well said brother.

@a-aron1550 Жыл бұрын

cool. why a 36 vice 24???

@stephentalbot3256 10 ай бұрын

Do you sell the sunglasses in Australia

@tbnationoutdoors-nateeckhold Жыл бұрын

Man cuz that apex is dope as hell. Buy me one please

@AnthonyJonesBrigadeBoats Жыл бұрын

Cuz when I become a big boy fab shop like you one day I can afford an Apex 13

@SmithFishingAdventures Жыл бұрын

Hey bud I inboxed you on Facebook a few weeks ago I was looking into doing a build I saw you do on the bass tracker and I was wanting to do the same… I wanted to know if I needed to buy all my materials or you would provide and you pay at the end when you pick up the boat

@AnthonyJonesBrigadeBoats Жыл бұрын

Hey buddy so sorry, I get a ton of message requests. I'll definitely dig into my inbox and connect with you!

@kevinmurphy4652 Жыл бұрын

What did you use to cut the .090 aluminum plate

@AnthonyJonesBrigadeBoats Жыл бұрын

sheet metal sheers

@kevingallich5557 11 ай бұрын

Nice work. I think that graph costs more then the boat. Look forward to seeing the rest of the build.

@AnthonyJonesBrigadeBoats 11 ай бұрын

I think you're right! She now has two! I'll be installing the second one as I am currently building the boat out.

@BrownBaitCo Жыл бұрын

gone all red I see lol! Good tools

@AnthonyJonesBrigadeBoats Жыл бұрын

Haha, still got a ton of Ryobi stuff. It's honestly good stuff for the price and what im doing. But newer Ryobi stuff is going brushless and they are getting higher in price so it made it easier to start switching over and investing in some Milwaukee stuff! Also, the rivet gun is a must have so it just made sense!

@BrownBaitCo Жыл бұрын

@@AnthonyJonesBrigadeBoats those rivet guns are super important! I did not know Ryobi is switching to brushless motors hmmm interesting!

@matthewrobinson8022 Жыл бұрын

How does a person get of the work list?

@AnthonyJonesBrigadeBoats Жыл бұрын

I have a wait list. Deposits required. I am selective about the projects I take on.

@bennation6856 Жыл бұрын

Had a 1870 grizzly with a 55hp tiller all rivets in the floor came loose . Removed floor found cracks in runners in several places. I would adress that issue first

@mriphone1000 Жыл бұрын

I have a 1648 tracker, had over a dozen cracks in the runners too. Took over a 100 hours to fix it. These boats are fragile from the factory. If you're going to be doing more than trolling in a river, you're going to be leaking water soon.

@dennislanning8076 Жыл бұрын

The 2 things , I see are no Gas Boat Motor . And the fish finder should be to the right , and it should be able to swivel and lock in place .. so if your at a launch and there's no Dock you have to crawl over a fish locator....

@AnthonyJonesBrigadeBoats Жыл бұрын

I thought I fully explained in the video the boat is for ELECTRIC ONLY lakes and reservoirs, therefore no gas outboards allowed. Most people who run Panoptix, or in this case, Mega 360 live image sonar, prefer large graphs mounted dead center in front if foot pedal so they can read the live imaging as they work the trolling motor. That's why we, and almost every pro boat, does it this way. But beauty is everyone can modify their boats to their own personal liking! Thanks for watching

@TheCrystallowe Жыл бұрын

Dude are you kin to Johnny's reloading bench?

@AnthonyJonesBrigadeBoats Жыл бұрын

Never heard of her but I'll look it up!

@michaelgonzalez8863 Жыл бұрын

Can I hook my PlayStation to that graph

@AnthonyJonesBrigadeBoats Жыл бұрын

I believe you can but unfortunately the X Box is not compatible.

@GeorgeT6566 Жыл бұрын

For what the Apex13 cost it better tell her what the fish weighs when is shows up on screen.

@AnthonyJonesBrigadeBoats Жыл бұрын

🤣 I honestly feel we are a few updates away from that technology! lol.

@huntermark1160 Жыл бұрын

Aren’t those batteries about 900.00 a piece?

@AnthonyJonesBrigadeBoats Жыл бұрын

I have absolutely no clue. Customer provided. I'm sure they are online. I typically use Amped or Powerhouse lithiums, aren't cheap regardless.

@odiesclips7621 Жыл бұрын

B.O.A.T.= Break Out Another Thousand $$$$

@AnthonyJonesBrigadeBoats Жыл бұрын

Or in this case, BOATT, Break Out Another Ten Thousand

@josearce9887 Жыл бұрын

Damn batteries cost as much as the boat 😅

@AnthonyJonesBrigadeBoats Жыл бұрын

It's pretty close 🤣

@TruthfulHunting Жыл бұрын

Anyone else worry about the stainless steel SPIKE sticking up on a boat?? maybe it is just me ..

@jasonmartin5955 6 ай бұрын

Not a bad way to spend 4000 bucks

@AnthonyJonesBrigadeBoats 6 ай бұрын

The fish finder was 4,000 🤣

@Jessica37323 Жыл бұрын

Lol all that money for the equipment and no outboard. I think I would spent the money for a outboard first

@AnthonyJonesBrigadeBoats Жыл бұрын

The beauty about boats (and many other things in life) is that people can make them their own however they want. Remember, this boat isn't done. And the customer fishes small electric only lakes, doesn't need an outboard. I'm sure she may get an electric outboard at some point, but what's the point if you don't have a trolling motor and electronics? You can LOL all you want but what I LOL about is people coming on my platform, that I built, to interject their opinion that I nor my customer ever asked for but you do it anyway so you can feel good about yourself and feel validated.

@mikeymike3760 Жыл бұрын

Strange to spend nearly 20k upgrading a Jon boat... all in price is very close to a decked out V bottom at that point.

@AnthonyJonesBrigadeBoats Жыл бұрын

Yeah but a v hull is still a v hull. We don't really use those in Ga. And that v hull brand new doesn't come with a 36v ultrex with spot lock, live sonar, lithium batteries, or a 4 thousand dollar graph. I've seen it both ways, guys buy brand new rigged boats only to rerig them and go another 10k in or guys start with cheap boats and outfit it in tons if moneyin top of the line accessories and electronics. Money all relative to the individual, I just build them.

@bangcao5537 12 күн бұрын

nice putting 50 into a 5 k hual.

@MrTk6969 Жыл бұрын

U realize u can't charge a 36v battery with 12v clearly u don't know how to wire.

@AnthonyJonesBrigadeBoats Жыл бұрын

You clearly are uninformed. A three bank 12v on board charger can absolutely be used to charge each individual 12v battery wired as a 36v system for a trolling motor. Read up- www.trollingmotors.net/blogs/wiring-electrical/116678215-guide-to-battery-chargers