Jonsbo D31 Mesh mATX PC Build | 13600K | Z690M | NF-A12x25

Jonsbo D31 Mesh mATX PC Build | 13600K | Z690M | NF-A12x25 | TL-B12

Рет қаралды 79,739

Күн бұрын

Jonsbo D31 Mesh mATX PC Build!
Small but Powerful :)
Parts List
- Jonsbo D31 Mesh (Black)
- Intel Core i5-13600KF
- Thermalright LGA1700-BCF Contact Frame
- Gigabyte Z690M Aorus Elite AX D4
- Corsair Vengeance LPX 32GB 3600 C16
- ASUS ROG STRIX Radeon RX 6700 XT O12G
- ASUS ROG RYUJIN II 240 AIO Liquid Cooler
- Noctua NF-A12x25 PWM chromax.black.swap x3
- Thermalright TL-B12 x2
- Maxwell Count 750W 80PLUS GOLD PSU
Chapters
00:00 - Motherboard Assembly
01:13 - Jonsbo D31 Mesh Assembly
05:02 - Cinematic Mode
06:11 - Thermals*
* Thermals
- CPU Voltage Mode (Auto)
- PL1 and PL2 Power Limit (4095W)
- Cinebench R23 (Mulit Core 24157 pts)
- AIDA64 FPU (15 Mins)
- Realbench 2.56 (15 Mins)
- Ingame (Destiny 2, Cyberpunk 2077 and Forza Horizon 5)
- 4K Rendering by DaVinci Resolve
Please like and subscribe for more!
#Jonsbo #13600k #6700xt #matx #noctua #thermalright #norgb

Пікірлер: 104

@jonathantran5821 Ай бұрын

Only build in the D31 I've seen that maximized the fan placements. Good job.

@SNAPSHOTREVIEW Ай бұрын

Oh, thank you very much! I'm planning to do various PC builds in the future. Please look forward to them!

@chalatan5347 Жыл бұрын

Man, I've been waiting for your video. Totally awesome and clean! Nice weekend bro👍👍

@SNAPSHOTREVIEW Жыл бұрын

Oh, my man! Thanks a lot! I'm glad you like it, nice weekend too bro 💜🖤

@2ndgamingdk Жыл бұрын

Always ready to give a big like on your videos! Good job

@SNAPSHOTREVIEW Жыл бұрын

Thank you so much 💜🖤 I also look forward to your videos 👍👍

@user-io3tl2lv7z Жыл бұрын

언제나 좋은 영상 감사합니다. 매일 새로운 영상이 올라오길 기대하고 있습니다. Peace!!🎉

@SNAPSHOTREVIEW Жыл бұрын

네넵~! 좋은 말씀 정말 감사합니다. 아마 다음 영상도 Blackout 빌드로 하지 싶네요 ㅎㅎ Cheers!

@hyungmincho1402 Жыл бұрын

이번 영상도 엄청 깔끔하고 멋집니다. 잘보고가요

@SNAPSHOTREVIEW Жыл бұрын

네! 감사합니다.

@Valkirth Жыл бұрын

such a clean and stunning build!, really impressed the 13600k temps are so low in gaming.

@SNAPSHOTREVIEW Жыл бұрын

Oh, thank you so much! I'm glad you liked it 💜🖤 Please, keep watching upcoming videos! Cheers 👍👍

@TheBaldygb 6 ай бұрын

Jonsbo D30 is an excellent product

@SungchulAn Жыл бұрын

Great! 역시 이번 영상도 고퀄이네요 ㅎ 자주 올려주세요. please upload often!

@SNAPSHOTREVIEW Жыл бұрын

감사합니다. 자주 업로드를 계획하나 쉽지 않네요. Thank you so much 💜🖤

@peerakanmakma6248 11 ай бұрын

thanks for the video, i appreciated it brother.

@SNAPSHOTREVIEW 11 ай бұрын

Oh, thank you so much! I am glad you liked it :)

@MoistSocks Жыл бұрын

Clean build!

@SNAPSHOTREVIEW Жыл бұрын

Thank you so much!!!

@kpw-kenchan 9 ай бұрын

What a build bro, And cinematography is top level. The music you chose is so amazing. Which tracks are you using?

@SNAPSHOTREVIEW 9 ай бұрын

Hi! I'm glad you liked it 💜🤎 The tracks I used were from a paid subscription service, and unfortunately... difficult to remember them. Sorry for that bro👍

@kpw-kenchan 9 ай бұрын

@@SNAPSHOTREVIEW it's not a problem. All you can do is point me to that service and I will find it lol

@kittikoonduangkaewkad9310 5 ай бұрын

Downtown Binary - Lost

@kpw-kenchan 4 ай бұрын

@@kittikoonduangkaewkad9310 thank you so much!!!!!!

@user-yk3op3bf6f Жыл бұрын

중간 중간 전문업체 영상인지 알았습니다. BGM퀄리티도 퀄리티인데 중독성 있어서 리듬 탈 뻔 했네요.

@SNAPSHOTREVIEW Жыл бұрын

ㅎㅎ 감사합니다. 영상 전문 회사는 아니지만 영상 편집 즐겁게 배우면서 하고 있어요! 자주 방문해 주시고 좋은 댓글 달아주셔서 정말 감사합니다.

@khyryII Ай бұрын

Very noice! I'm in the process of planning for an upcoming build. I'm curious to inquire whether you're utilizing the top radiator as an intake or exhaust in your setup?

@SNAPSHOTREVIEW Ай бұрын

Oh!! Thank you so much👍👍 The top radiator is set up for exhaust, which is the most common configuration.

@hayongsong7793 Жыл бұрын

NICE!

@SNAPSHOTREVIEW Жыл бұрын

Thank you so much 💜🖤

@kittikoonduangkaewkad9310 9 ай бұрын

I'm subscribe for this Amazing music.

@SNAPSHOTREVIEW 9 ай бұрын

Oh!!! thank you so much, my friend 💜🖤

@chaics85 3 ай бұрын

Nice built. May i know is the clip used on the front and side panels are the same like the lian li's? cos they're prone to brittle after few years of opening and closing it.

@SNAPSHOTREVIEW 3 ай бұрын

It's quite different from Lian Li designs. The front panels use plus-shaped pins on them and the side panel uses push pins on the chassis. In my opinion, they seem sturdy so it's not a big deal. 👍

@chaics85 3 ай бұрын

@@SNAPSHOTREVIEW thanks for the reply. Will highly consider this case for my next build. 👍🏻

@purfecto Ай бұрын

nice build my man! got the same case with 14600kf 4070tisuper, went with fuma 3 tower but considering to change to AIO cause in the air cool setup bellow fans are not enough and you have to use at least one more as intake, that introduces a bit more dust because the case lacks top /back filters, although you can clean it more regularly i am also interested in the "Cleaner" looks of aio and might try it, in general i think the case is a optimized WC one, what are your thoughts on Lian Li Galahad II? did you choose 240 instead of 360 aio for some reason? the top has the clearance for a 360 but i guess ull have to run the tubes from the back side if you dont weird bending of the tubes over the psu/front. also in the case of a 360 u would prolly not need a back exhaust and go with a chimney setup?

@SNAPSHOTREVIEW Ай бұрын

Thank you so much!! I used 240mm in the video and sufficient cooling for the 13600K. The D31 case uses bottom fans mainly, more suitable for liquid cooling than air cooling. The Galahad II Trinity 240 is good enough for the 14600KF, and its pump speed isn't too high, noise is reasonable. Plus, it looks great! I'd recommend it. The LCD version is the Asatek 8th generation, but the cooling performance is significantly better, but the noise level is quite high. Hope this helps💜🖤

@purfecto Ай бұрын

i have the screen version of the case so one more screen in the block is redundant for me ^_^, tbh i just noticed the arctic LF 3 is out and on sale all reviews seem to be amazing, i am just between the 280 or the 360 now of that cooler, i think the 280 will "land" better in the case and the performance difference should be negligible? not sure... i just hope i dont get pissed by pump noise at idle which is the one thing i love about tower air coolers... oh well@@SNAPSHOTREVIEW

@masgarrrrr 11 ай бұрын

🤩

@Ivan-xg1hx 9 ай бұрын

I’ve heard many user complained about high temperature in this case, especially the toasty gpu and restrictive top panel, are your temps still good after a couple months?

@SNAPSHOTREVIEW 9 ай бұрын

Sorry bro! I don't use this chassis anymore but I didn't see any issues with this build setup during the past 3 to 4 wks. Anyway, this case requires the use of a liquid cooling solution to ensure effective cooling because of the three bottom intake fans. Adding one more front intake fan shouldn't cause any cooling issues. However, if an air cooling stuff is used, it may potentially impact GPU temps, also leading to higher temps during hotter weather conditions.

@mickaelsflow6774 9 ай бұрын

@@SNAPSHOTREVIEW what's wrong with the three bottom intake fans? :(

@zekhor1140 10 ай бұрын

Hello! Can i know that what's your airflow direction u set for each side fans? I'm interested in building the same case! I do have NZXT Kraken z53 AIO + R5 3600 + Asus Strix 3080 Also one more question, what's the thing to hold the GPU to prevent GPU saging? Thank you!

@SNAPSHOTREVIEW 10 ай бұрын

It has a total of 4 intake fans with one in the front, and three at the bottom. For exhaust, two radiator fans and one at the rear. This setup seems to provide excellent overall cooling, and the noise performance was also good with using Noctua fans. You have sufficient cooling for your CPU with the Kranken, and it seems like a well-balanced configuration. Finally, to prevent GPU sagging, I used a 180-degree adapter for the graphics card cable. I hope this helps 💜🖤

@zekhor1140 10 ай бұрын

@@SNAPSHOTREVIEW Thank you so much your info!

@Null_pointer_ Жыл бұрын

전 후면은 a12x25가 아니라 구매자의 요청으로 tl-b12로 하신건가요? 보통 깔맞춤하는편인데 의외네요? ㅋㅋ

@SNAPSHOTREVIEW Жыл бұрын

안녕하세욤~ 아하~ PC 조립을 직업으로 하는게 아니라서 그냥 최근에 구매한 팬이라 테스트 목적으로 넣어봤어요. a12x25가 커넥터 타입이라 가끔씩 빠지는 경우가 종종있어서 뒷쪽 선정리 타이트하게 하면서 하다보니 터프팬하고 고민하다가 tl-b12로 넣었습니다. 감사합니다!

@roxycrystals1356 8 ай бұрын

Hi I have a question, You are using mainboard mATX Z690M AORUS ELITE AX DDR4 right? This mainboard have: 1 x water cooling CPU fan header ( it is for upper water cooler and 2 fans on it you use ) 3 x system fan headers ( it is for 3 fans on the buttom) 1 x system fan/water cooling pump header (it is for pump) 1 x CPU fan header ( it is for 1 fan on back) You install 3 fans buttom 1 front and 1 back, it look like there is not enough pin on this board (1 short). Or i do not anderstand somthing. Can You clear on this? Thank You whit regards. PS It is important to me I am building AIO based cooling and maybe you use some trick or realy I dont understand something. PS2 Wideo is ultra cool I was watching this set like 10 times and showing to my friends.

@SNAPSHOTREVIEW 8 ай бұрын

It seems like the Z690M AE motherboard has a total of 6 PWM ports, and although I don't remember exactly, I believe I worked on it as follows. SYS FAN 1 - A front intake fan SYS FAN 2 - A rear exhaust fan SYS FAN 3 - Three bottom intake fans SYS FAN 4 - AIO pump (this port is compatible with it) I used a 3-to-1 PWM fan splitter for the three-bottom intake fans. Please refer to the following link for more details. a.co/d/dWf3aGt The 3-to-1 PWM fan splitter is quite useful, so ordering several of them would be a good idea! Hope this helps! Good luck, my friend👍👍

@roxycrystals1356 8 ай бұрын

yes TY very much this is the answer I was looking for TY once again this splitter that👍👍 is it @@SNAPSHOTREVIEW

@BioSSlon 9 ай бұрын

As an engineer, I have a complete misunderstanding of the presence of a fan on the pump of the LSS. What is this nonsense? O_o

@SNAPSHOTREVIEW 9 ай бұрын

That's right! I agree too 👍 I remember setting the onboard fan load to 0% when using this CPU cooler to reduce the noise. Thank you for the comment bro💜🖤

@DannyBoycustom 4 ай бұрын

If you are talking about the fan on the water cooled Gpu my guess the fan is to cool down the screen attached.

@BioSSlon 4 ай бұрын

@@DannyBoycustom It’s not tube-based to cool it. )))) The only thing that the fan can cool there is the VRM zone.

@markusrasmussen374 Ай бұрын

It's there to cool down the VRM. You should not put it to 0% !

@BioSSlon Ай бұрын

@@markusrasmussen374 Makes sense, but there is one thing. A small fan at low speed creates very little airflow. Therefore, the effectiveness of this solution is very low. Otherwise it will be very loud.

@jacobsmith2466 Жыл бұрын

Clean! the 4070ti okay with this case?

@SNAPSHOTREVIEW Жыл бұрын

Hi! I think that RTX 4070 Ti should be okay with Jonsbo D31. Ah!! It's definitely better if you use the MOBO starting with the 1st slot for GPU and bottom fans clearance. Cheers 👍👍

@kaaiuta Жыл бұрын

I'm thinking about getting this case but I'm afraid my PSU power connectors might not reach because of how the cables will be oriented... Your PSU in this build has 600mm and 2 700mm mobo and CPU connectors respectively, was that plenty of length or barely enough? My current PSU has 450mm ATX and 500mm EPS

@SNAPSHOTREVIEW Жыл бұрын

+24V and PCI power shoud be fine with your stuff, CPU power is a bit curious... It depends on how you manage cables though.If the cable length is not enough, how about using an extension cable partly? Cheers!

@kaaiuta 11 ай бұрын

@@SNAPSHOTREVIEW Thank you for the advice! Yeah I was thinking about extensions as a last resort.

@user93683 Ай бұрын

No way, he used that front fan mount. I don't understand why almost no one uses it. Like every build video I watch there was about 2-3 guys who used it

@SNAPSHOTREVIEW Ай бұрын

Oh, thank you so much for watching the video! Looks like you're a fan of the Jonsbo D31!

@user93683 29 күн бұрын

@SNAPSHOTREVIEW , yes, maybe, kinda) When I first saw this case, it seemed good for me, but after a bit of digging, I discovered some flaws in its design. It's still a really decent case, especially for its price, so there are no reasons to not use it)))

@blkfacejr.9097 Күн бұрын

@@user93683what were some of the flaws for you

@man3254 Жыл бұрын

그래픽카드 전원케이블 연결할때 각진 연장 단자? 쨋든 각지게 생긴건 뭔가요? 케이블 연결할때 좋을것같네요

@SNAPSHOTREVIEW Жыл бұрын

오호 안녕하세요~ 밑에 링크 참조하세요! url.kr/adx54e 감사합니다.

@man3254 Жыл бұрын

@@SNAPSHOTREVIEW 와... 정말 감사드려요..

@Mobiletechvr 7 ай бұрын

Can the rx 7900xtx merc 310 fit in that case?

@SNAPSHOTREVIEW 7 ай бұрын

The maximum GPU clearance depends on the AIO cooler, the motherboard's graphics card slot, PSU size, and installation height. With a 3-slot AIO cooler and a 150mm PSU, the maximum GPU length would be 335mm. Hope this helps💜🖤

@Mobiletechvr 7 ай бұрын

@@SNAPSHOTREVIEW the cooler is a aio 240mm and a atx psu

@mrbuckums8565 3 ай бұрын

have the same case, had trouble cable management and can't get the back on, any tips? and what was the support for the gpu

@SNAPSHOTREVIEW 3 ай бұрын

I'm sorry to hear that. There isn't much space for cable management, so try to use the available space on the front and bottom of the case. it would make things easier for you. For the GPU adapter, please check bit.ly/46rLRBN

@mrbuckums8565 3 ай бұрын

@SNAPSHOTREVIEW Thank you and was able to get the back panel close. What I was asking is the thing you put under the graphics card to prevent it from sagging

@TheRelisted Жыл бұрын

what connectors are those for the gpu connection?? 90 degree? sick!

@SNAPSHOTREVIEW Жыл бұрын

Hi~! Please check this link! url.kr/adx54e You can find things you want :) Cheers

@abigailhazend8550 Жыл бұрын

May I know is that an accessories for connecting gpu power pin? What is that exactly? Please share thanks

@SNAPSHOTREVIEW Жыл бұрын

Yo, my friend! Please check! url.kr/jv8oxw Hope you buy good stuff then 👍👍

@foreskrin 11 ай бұрын

Where did you get the mesh panel for the front instead of the screen?

@SNAPSHOTREVIEW 11 ай бұрын

Hi! The mesh panel you spoke is included as standard. Or you can buy the D31 mesh version as well. Cheers!

@duynhat638 5 ай бұрын

so contact frame is legit in PC build now

@mawandaeed 10 ай бұрын

What are those cables sleeves bro

@SNAPSHOTREVIEW 10 ай бұрын

Hi! Thanks for your comment! The sleeving cables that come with the power supply I'm using, and commonly available from brands like Corsair or Seasonic. Thank you so much, my friend👍👍

@trevorbelmont4633 Жыл бұрын

Double sided tape the 2.5SSD?

@SNAPSHOTREVIEW Жыл бұрын

I guess it's possible but you can put the 2.5 SSD x2 on the tray. Thanks a lot 🖤💜

@user-kq2ph4jd9h Ай бұрын

Вы указали температуры CPU, что с температурами GPU?

@SNAPSHOTREVIEW Ай бұрын

I don't remember the exact GPU temperature, but since I'm using bottom fans, it shouldn't be bad!

@eonsi 11 ай бұрын

그래픽카드 180도 커넥터 어디서 구매하셨나요?

@SNAPSHOTREVIEW 10 ай бұрын

안녕하세요~ 요 링크 참고 부탁드려요. shorturl.at/kmnoF

@eonsi 10 ай бұрын

@@SNAPSHOTREVIEW 감사합니다!

@Nader-sama 8 ай бұрын

pcie gpu cable NAME PLS ?

@SNAPSHOTREVIEW 8 ай бұрын

Ah! PSU direct cables like the Seasonic stuff. If you meant the degree adaptor, please check this link! url.kr/adx54e Cheers bro!

@fairycat Ай бұрын

Corsair’s RAM😊

@zemnoydis Жыл бұрын

Перед/Зад 140 мм можно поставить?

@SNAPSHOTREVIEW Жыл бұрын

привет, друг! Вы можете установить 120-мм вентиляторы спереди и сзади. Вы можете установить два 140-мм вентилятора вместо трех 120-мм снизу.

@zemnoydis Жыл бұрын

@@SNAPSHOTREVIEW my thanks, good luck in the development of the channel

@TheLucasGregory 5 ай бұрын

Song?

@SNAPSHOTREVIEW 5 ай бұрын

Sorry, bro! I used this on artlist.io, but I don't remember.

@fdjw88 Жыл бұрын

You probably could upgrade that GPU to a 6800XT if you go easy on the expensive Noctua fans.

@yuvanraj2271 Жыл бұрын

Yeah, the cpu can even handle 3090.

@fdjw88 Жыл бұрын

@@yuvanraj2271 An i5-13600k is strong enough to handle a 4090, let along a 3090.

@SNAPSHOTREVIEW Жыл бұрын

Oh thanks a lot! Absolutely agreed but I used RX 6700 XT for maching the ROG cooler in this video. I buy all the parts myself to build a PC and GPUs are always expensive in my limited budget.