Jonsbo D40 Chassis - System build

Рет қаралды 35,201

Күн бұрын

Overclockers UK sent Kris a Jonsbo D40 case at £100 for a PC build. Which we know you like. Let us know what you think of the case and if you would buy one yourself.
00:00 Start
00:22 Introduction
00:48 Up Close with the D40
02:27 Mini version - D30
02:51 The build components
05:31 Putting the motherboard core system together
12:23 Building into the D40
18:39 PSU install and chat
23:51 GPU install and finalising the build
27:13 Test Results
27:55 Kris Closing Thoughts
Subscribe to our channel here bit.ly/3B5CAAs
Be sure to check out our sponsors store EKWB here: ek.tech/kit-guru
Join this channel to get access to perks: bit.ly/3xF9l4y
Check out KITGURU MERCH over here: teespring.com/en-GB/stores/ki....
Discord invite link: / discord
Steam Community steamcommunity.com/groups/kit...
Be sure to support us on PATREON / kitgurutech and read our MANTRA on HONEST REVIEWS Here: bit.ly/2BopnF9
KitGuru uses a variety of equipment to produce content:
Panasonic S1 Cameras / Panasonic S5 and GH5s Cameras
Panasonic GH4 Cameras
Panasonic G7 Cameras
DJI OSMO Pocket Cameras
Canon Cameras
Various PC builds
Final output - colour grading/titling etc:
Mac Studio M1 Ultra - 128gb memory, 4TB, 64 core GPU.
Mac Pro 2019 - 16 core, Radeon Pro Vega 2 Duo 64GB, 384GB, 120TB Raid 3xXDR monitors
iMac 2019 9900k Vega 48/64/1TB
Adobe Premiere Pro CC (PC)
Davinci Resolve Studio 18 (Mac)
iPad Pro 12.9 inch (2018) machines with LumaFusion
Final Cut Pro (Mac)
Visit our facebook page over here! / kitguru.net
Visit our Twitter page over here! kitgurupress?lang=en
#ornataV2 #razer #mechamembrane
Discord invite link: / discord
Steam Community steamcommunity.com/groups/kit...
Be sure to support us on PATREON / kitgurutech and read our MANTRA on HONEST REVIEWS Here: bit.ly/2BopnF9
KitGuru uses a variety of equipment to produce content:
As of May 2019:
Panasonic GH5 and GH5s Cameras
Panasonic GH4 Cameras
Panasonic G7 Cameras
DJI OSMO Pocket Cameras
Canon Cameras
Various PC builds
Final output - colour grading/titling etc:
iMac Pro 18 Core/Vega 64/128GB
iMac 2019 9900k Vega 48/64/1TB
Adobe Premiere Pro CC (PC)
Davinci Resolve Studio 14/15 (Mac)
iPad Pro 12.9 inch (2018) machines with LumaFusion
Final Cut Pro (Mac)
Visit our facebook page over here! / kitguru.net
Visit our Twitter page over here! kitgurupress?lang=en
#jonsboD40 #pcbuild #modding

Пікірлер: 54

@minobg79 Жыл бұрын

I think most people are missing the point with this Jonsbo concept. It started with Jonsbo U5 and now they sort of build up on it. The point is, this is the case that gives you full ATX support in what basicly is a standard mATX case volume and almost mITX footprint (just a 1,5 cm bigger in width and lenght than NR200). By changing the usuall position of the PSU, they filled up what used to be the HDD storage room, which in most cases nowadays is not needed. That cleans up the whole bottom of the case which is a perfect substitute for the meshed front panel and supplies the whole graphic card area with fresh air, unlike most of the typical cases where PSU shroud is kind of obstacle nowadays. This idea saves a lot of volume without limiting component size, you can still install more than average PSU size along with high-end sized VGA, and big tower cooler. IMO this is an internal desing which reflects nicely on what the most modern PCs need. Good cooling capabilities for powerful HW, limiting what is not priority anymore - bulky storage bay, not wasting footprint and volume. I really like this concept. It is not as modular and adaptive as your usual modern ATX towers, but it is well thought out, so it works fine as intended. It is refreshing to see such approach, because most of the manufacturers went the opposite way, trying to implement all the possible options into their produsts, which made a lot of "mainstream" ATX cases grow in size way beyond my liking. Personally I like that it comes without fans, as I always replace them for quality vents of my choice. Other brands always left me with unwanted waste. Well done Jonsbo for thinking out of the box with the whole D series.

@Roman56756 8 ай бұрын

It's a pity that he has no analogues

@807800 4 ай бұрын

Also, he setup the CPU cooler fans in the wrong way. It should be installed to use intake from the rear of the case.

@powermaster5004 Жыл бұрын

kitguru have some great system builders

@ss-xr8wr Жыл бұрын

Pretty standard case very minimalist and clean, nice design.

@marcin_karwinski Жыл бұрын

Jonsbo also has recently released new variant(s) to these cases, names are ending with a "1" so D31/D41... and how do they differ to these 2+ years old designs? They're adding an LCD screen you can easily display temps, power draw etc. onto, so the front panel becomes a bit more nuanced and interesting. Yet, the D40 is basically still a big case and one without actual capacity for a lot of components you might want to saturate the ATX boards' connectors with, it's certainly far from SFF, its mATX counterpart D30 is better at the SFF moniker application and yet it already straddles the line between SFF and traditional chassis designs as it is placed somewhere on the bulkier side to CM NR200(P), and a bit over Krux Naos/Sama IM01, somewhere similar to Asus AP201.

@maxabillon Жыл бұрын

Enjoyed watching, I Had the all-white version of this case, mod some tall case feet make a big change in bottom airflow around 1 inch or more, the front type C is merged with normal usb 3.0 cable so will lose a lot of speed, the cheap plastic case feet for mine where in the with the screws, I sent this one Back due to paint Defects inside corners, Case price expensive, have worked with better £39/45 case than this one.

@testtv6500 Жыл бұрын

Nice clean build.

@rufusmctavish1164 Жыл бұрын

Nice build, case looks a bit confined to me compared to some of the leading ones in the same price bracket.

@makina9226 Жыл бұрын

Amazing the expansion card bay format hasn’t changed for like 40 years now.

@SaeedM0hammed Жыл бұрын

That's not a heatsink it’s a monolith lol. About time you guys did an air-cooled system!

@mikep9418 Жыл бұрын

Steve from GN would be in tears if he reviewed that case 🤣

@greatwall9741 Жыл бұрын

Steve is very good in reviewing what he likes. Though there are popular cases he never touched like the cases optimum tech tackles. Steve is not even in the 10 percent of all cases available today. He likes to assume everyone watching his channel is in the same page with him when he rants.

@camotech1314 Жыл бұрын

@@greatwall9741 yup he basically just does mid-tower and larger mainstream cases, mostly due to being so busy all the time. Don't think I've ever seen him take a look at any mATX cases at all either.

@harleylover9446 Жыл бұрын

i like the case pretty understated.

@MelvinDlaCruz Жыл бұрын

can you do a video comaprating this air cooling to the noctua d15?

@leonbtw4954 Жыл бұрын

Can you do the D30 matx version? They are always a bit tricky as there isn't a lot of room.

@stickyfingers9710 Жыл бұрын

cant say its the best looking case ive seen tbh. nice build tho mate

@ulamss5 Жыл бұрын

would you be able to squeeze in 3x120 fans on the bottom?

@greatwall9741 Жыл бұрын

Will you do the D30 with sfx PSU and 480 rad on top? I think its quite cool.

@QuentinStephens Жыл бұрын

I really enjoyed that. Thank you. Quality rant on mounting the CPU cooler fans. I was gobsmacked when you said it costs £100. With no fans, RGB grommets, captive screws, so little room at the back, etc it looks more like a £50 case. Compare the (mATX) Kolink Citadel Mesh, available for £55 with two fans. It's a hefty premium for an unusual PSU placement. I do have one question: would CPU temperatures have been better if you reversed the fans? As is you seemed to have the front CPU fan fighting the PSU fan for air intake, but what if you reversed the fans so that the CPU cooler pulled air in from the outside through the rear and expelled air to the front - into the PSU?

@mikep9418 Жыл бұрын

I had the Kolink mesh as a media PC until I upgraded to an itx build. A great case with excellent airflow, unlike the one reviewed here.

@octodinosaur2419 Жыл бұрын

I agree with your observation. Using the rear as intake for the CPU and installing the provided rear filter and sucking the hot air out the top would be much more efficient.

@arsnosatu6 Жыл бұрын

Nice.

@BurakEdits Жыл бұрын

Think would have preferred an open front or at least some kind of ventilation at the front.

@tft_and_chill Жыл бұрын

did we have a D30 review??

@alpenfoxvideo7255 Жыл бұрын

a slight E-ATX like the ACE won't fit?

@budhzie Жыл бұрын

this case needs bottom intake for efficient cooling, like cooling tunnel, bottom to up air stream, also i can get similar case, gamemax spark pro for ~$45 only

@liamsmith2376 Жыл бұрын

Does anyone know what fans these are on the CPU cooler?

@kv70 Жыл бұрын

Will the HX7280 work with AM5 motherboards?

@kingseeker355 Жыл бұрын

Wouldn't putting those two be quiet! fans on the bottom as intake, then another two on the top as exhaust be a better airflow system? Seems like using the two on top as intake is going directly against natural convection.

@Ktmzqw Жыл бұрын

Any fan turning at their lowest speed will beat convection

@DangerGnom Жыл бұрын

@@Ktmzqw exactly. The air movement by fans will completly ignore the convection. I don't know why people still think this marketing BS of convection being a matchwinner is a thing, is out of my mind.

@kevinsheppard6085 Жыл бұрын

Love the fact it was a non AIO build for a change, that was great, but seeing that sealed front panel just screams NOOOOOOOOOO to me.

@kalitvenec Жыл бұрын

cool

@camotech1314 Жыл бұрын

That cooler seems a bit overkill for that CPU. A single tower like the Deepcool AK420 would have been fine I'm sure. Case expensive for what it is.

@StratoPL Жыл бұрын

Will it fit 4080? 🤔

@BoyceBailey Жыл бұрын

But does a HUGE 4090 fit in it?

@andrec7246 Жыл бұрын

This case look like the Mac Pro case. I like it

@SkyForce6700 Жыл бұрын

I have never heard of this Jonsbo brand before and is not available here in Sweden! I wonder why that Made In China stamp at the back needed to be that prominent and big? That is reason enough not to buy it for me at least! It appears this case copy some of the ideas from the Coolermaster Mastercase SL600M case that I have with the top mounted vertical PSU at the front end and sealed smooth silver front. But of course this one is not up to the same quality and not as good looking since the SL600M is a $230 premium case. The airflow idea with the SL600M is to have a vertical bottom to top airflow which gives it the best GPU temps in the market (still the chart topper on Gamers nexus charts for GPU temps). But I guess Jonsbo missed the memo about this since it does not come with any bottom fans and have really short feet not giving enough airflow at the bottom of the case.

@MohamadsGarage Жыл бұрын

is that john cena?? where you have been, we are looking for you !!

@KnightRider-lq5yb Жыл бұрын

jonsbo? never heard of them !

@naberof5821 Жыл бұрын

It;s a reasonable price for a reasonable case.

@larwiemcdonnel5322 Жыл бұрын

Looks like Leo's brother who likes to work out

@justindavis7600 Жыл бұрын

not a nad looking chassis that, never heard of them - is this an OCUK special case?

@mikep9418 Жыл бұрын

Jonsbo have been around a while. They're particularly known for their itx cases but tend to be a tad expensive. I believe OCUK are a UK distributor.

@sento4207 Жыл бұрын

Who are Jonsbo?

@frijin490 Жыл бұрын

The reason why i hate those stupid air cooler fan clips, Only Corsair has got a decent fan mounting system.

@haremofprocessors6954 Жыл бұрын

looks like anotehr case ive seen lately, cant think of the name of it.

@stronkveak5917 Жыл бұрын

it's small

@cj_zak1681 Жыл бұрын

No slight against your work personally (the build looks fine) but this feels like a really uninspired case design. Very meh indeed

@CoffeeGameMovie Жыл бұрын

this is a new trend lol, more and more cases coming with this psu front design and it is very good cuz of the much better use of space

@GraceMcClain Жыл бұрын

The price is utterly absurd for what looks like a poorly retooled Raijintek case from about 4 year ago. Not remotely impressed.

@miguelgarciajr4329 Жыл бұрын

i do not like the case look