This drone changed my life! lol took me from not knowing how to use a drone to flying around making lines and adding more speed and confidence every day! Super sweet and the tune is so sharp!
@acawave23234 жыл бұрын
Very much so!! Newbeedrone is such a solid company. Im pushing hard to put all my friends on out here in chicago!! Much love to you guys.
@bubblezovlove72132 жыл бұрын
Would you mind advising me please? I would like to buy a tiny whoop with FPV kit but I'm reluctant to just dive in without someone to help guide choices a bit....
@antonrickert94272 жыл бұрын
@@bubblezovlove7213 i heard that the emax tinyhawk iii is very good. But just watch some reviews and buy what you like :) I personally have the eachine uz65 but it sadly doesn't come as a kit. Happy flying!
@McBrideclan64 жыл бұрын
Joshua bardwell you have taught me so much! Thank you so much keep it up
@MrSabram074 жыл бұрын
Me 3
@Oldman-Havok4 жыл бұрын
Me 4
@mantassernius89764 жыл бұрын
I m J.B. and you gonna buy something today...
@lolipopsandfancypants72574 жыл бұрын
J B is like this guy who knows everyone's dealers. Hey guys I know a guy who's got this new stuff that's wild. You should try it.
@strangerdangerdays3 жыл бұрын
Got interested in drones begin of 2020 Started FPV w/Beta start kit in spring and became addicted.As newbie made mistake of cheaper kit not knowing about motors. Also bought Emax strt kt because cheap price but....EZ Pilot quad sucks. Bought 2 1/2s TinyhawkII that after much frustration finally found abt Bayang only protocol on my radio. Got RMstr TX16S and bound but not knowing any better had again thinking cheap $ bought a Chromebook for Betaflight which became another nightmare and so on...got this in the mail and without headache/nrvs brk dwn was FINALLY able to fly something w/new radio. Since I keep spending $ like I actually have some I'll start using your link. Stay safe, Stay aloft
@SOLARFPV4 жыл бұрын
I am both surprized and super happy that you did this review. Silverware and brushed micros deserve more coverage, since they still provide a great entrypoint into FPV. That little ducted drone flies so great 👍 plus it has potetial for learning how to code, compile and get results, if your interested in that. Great functionality with the OSD, to change some settings. Great review Joshua 👌
@RADERFPV4 жыл бұрын
Wow, that camera is incredible! Darn near thought it was digital at first.
@DougEfresh.4 жыл бұрын
I've had the Hummingbird for a couple months now and love it. I paid around $75 for it though because it was new I guess. I love that you did a video on this one thank you.
@JoshuaBardwell4 жыл бұрын
Hi, Doug. I see this comment. However there is no question in it so I didn't respond.
@lolipopsandfancypants72574 жыл бұрын
So I am working on a 10" prop discovery tbs clone and some flite test foamboard rcs as well as a tyro 99 on order, but I did purchase one of these tiniest for my 9 yr olds bday as an intro into flying for him. I think its going to be killer fun added to the fleet. Its like a everywhere fpv quad. Soon as your in a building or underground federal aviation rules don't apply.
@CurlyTheCat4 жыл бұрын
Tiny Whoops are also nice when it's 105 degrees out and 60% humidity like it is in San Diego right now, and it's too hot to justify bringing out the Vivid or Whirligig. NewBee Drone is my local drone manufacturer, that means my family can't yell at me because I'm supporting local businesses. You can bet I'll give them all my money when they finally figure out a digital Tiny Whoop.
@charlesm.51103 жыл бұрын
Joshua is the truth, he takes time to help me always - Charlie M here man with the Baby Hawk! Love you brother! I owe you and it's coming :)
@reubengraham83984 жыл бұрын
Just bought myself a betafpv silverware FC , and a beta 75s stuff so I can make my own one. Big upgrade from a e011
@nyclassic4ever1302 жыл бұрын
Supposedly NBD gold brushed motors have a lifespan of 5 to 6 hours. I have been flying original motors since Dec 2020...its now October 2021 and as good as day 1. 👍
@ShirleyAerial3 жыл бұрын
I just got my HummingBird in my HoneyPot order from NBD! I am super stoked to fly this guy. I had know idea this wasnt BetaFlight quad. Thanks for the explanation! Ive owned the brushed BeeBrain and Brushless BeeBrainLite from NBD and love them.
@mikaelbackstrom4 жыл бұрын
Lovely. I wish it was easier to get Newbee Drone products here in Sweden, their stuff looks amazing. Thank you for the review.
@ZPFunk4 жыл бұрын
Dang Bardwell... They we're the go to at the last Whooptopia. There were 64 pilots from all over at the last one. AyyyKayyy took the win in pro class on the NBD hardware, it was surreal how locked he was. Great for beginners and experienced alike.
@vhfgamer4 жыл бұрын
It looks like it flies just like my Beta65 Lite running NFE Silverware. #1 Yes you can adjust settings in Silverware without flashing it. #2 Bayang protocol is lower latency than FRSKY, thus it is better. If someone made a larger diversity Bayang receiver for 5 inch drones, I would convert every last one of my drones over to it.
@michaelreyes86704 жыл бұрын
New on FPV, I got a US65 for 2 years now. Been playing with the PIDs., but the whoop does not fly satisfactory the way I want it. Been reading about PMB. And applied settings like Props out. Still not satisfied. With this video, I'm going to get a NBD whoop even it is brushed motor. Like what your saying, I just want to fly and hone my flying skills. Not messing around with the engine and tuning. Like your content. 😁
@sobstvenno3 жыл бұрын
Did you try project Mokingbird settings for 0802 whoops?
@vhawkins82893 жыл бұрын
I'm researching to start and after watching your other tiny whoop vids it sounds like this is the way to go. Still wish I didn't have to spend hundreds of dollars to start, but your reviews are very helpful. One request, will you state the expected flight times per charge? Thanks!
@NadaCrook19743 жыл бұрын
You could also get the Beta FPV VR01 goggles and save about 50 to so bucks, which are pretty good for beginners and for its price point
@Politicallyhomeless9573 жыл бұрын
I own one of these and a brushless bee from newbeedrone:))) I think they are the best Microdrones for my money. Good to see you taking a look at these JB cheers
@adamlhotak81804 жыл бұрын
I’m gonna get one once they’ll release a brushless version
@wjadams24 жыл бұрын
Joshua from the future is always a smart chap.
@tenToesUp7474 жыл бұрын
People laugh at me when I tell them how much I love this quad. Freestyle this little sucker. It’s an amazing little machine. Silverware baby!!! Lol
@winssms4413 жыл бұрын
So much to choose from, wow, it is awesome, keep the stuff coming, I'm slowly learning.
@da_bits4 жыл бұрын
lol love the face on the pause to explain the silverware config
@pksteffen4 жыл бұрын
JB is right. Great whoop for $48 bucks!! Newbeedrone Hummingbirds rule! PMB and Silverware makes it even better.
@andrewb99423 жыл бұрын
This guy had better have a KZfaq subscription from every drone pilot on the planet
@baggszilla3 жыл бұрын
Sick man can't wait to check out that battery spread sheet!
@princesfpvdrones4 жыл бұрын
Ok I will wait for the brushless version.
@DougEfresh.4 жыл бұрын
You will be happy with that I'm sure but the brushed version will amaze you. The motors are cheap and easy to replace anyway. Just let them cool off between flights and they'll last awhile.
@omardjperez3 жыл бұрын
Mine came DOA Little to now video figures! I get the bad unit. Hoping to hear back from @NewBeeDrone
@ericwaters94194 жыл бұрын
Should've mentioned how good the camera is.
@JoshuaBardwell4 жыл бұрын
I had a section recorded about the camera but I figured you can see the footage and decide for yourself, and it wasn't a good use of your time to spend 2 minutes telling you what you could already see. If the camera had been bad, I would have made sure you knew.
@ericwaters94194 жыл бұрын
@@JoshuaBardwell good point
@icecorebaby4 жыл бұрын
I have the brush less flagship model. I love it!
@JamesWilson-mz5xk4 жыл бұрын
I still have my first Eachine E011 boatd flashed with silverware that was my first quad 4 years ago and it is still my favorite. It's been thru countless motors from 6x15mm to 10x20mm in whoop form to the OG Boss7 frame. Absolutely bullet proof. FC at most was $10 7x16mm motor less than $2 a piece. Then eachine, boldclash and jjrc said no more. Popularity finally ruined it by knocking up motor prices to stupid levels same as brushless now.
@thirtythreeeyes86244 жыл бұрын
I really regret not buying more of the e011 boards when they were available.
@ProjectMockingbird4 жыл бұрын
I still have my very first E011 board that NFE sent me to try his first version of "NFE Silverware"...collectors item! It didn't even have Angle mode on that first test version of the firmware!
@JamesWilson-mz5xk4 жыл бұрын
@@ProjectMockingbird that's cool I had to break down and finally message him and ask what comment in and out meant. These kids and there newfangled detailed how to KZfaq videos. In the old days you had had to scour forums till your eyes bled in the snow up hill both ways lol.
@gozillasin99344 жыл бұрын
Whoop is also fun and I agree bush motor is good for indoor FPV. But whoop and mini quad is so different same as table tennis and field tennis. I hope beginner well understand this point before they start.
@ProjectMockingbird4 жыл бұрын
Jeeez, Joshua, we might just make an Angle racer out of you yet! Great review, great flight footage, but that Patrick Clarke is a hack. ;)
@josemora99074 жыл бұрын
Sorry by answer here ,i dolores tour instrucciones for calibrating and triming with betaflight sticks comands everything was perfect. thanks now my little uruav 65mm brushless is stable. But when I want the drone to turn on itself it moves and does not stay in the same point How can i fix this,? You may have said it but I try to understand everything I can in English. Thanks for your teachings.
@jasongauruder54914 жыл бұрын
At 6:54 you have a shot of the OSD and being able to change the various flight modes' switch assignment. Is this same OSD menu in the new betafpv beginner kit that has a brushed whoop with silverware? If not, I assume this is yet another nod in the direction for this newbeedrone 65mm brushed non-betaflight quad vs the betafpv offering. Thanks, and keep up the good work!
@uavtech4 жыл бұрын
11:25 - Maybe he meant: "'You'All wins races' with this quad!" ?
@ProjectMockingbird4 жыл бұрын
Dammit, was that my old Kansas accent coming out? hhahah
@kylemark45362 жыл бұрын
Your awesome man hope your enjoying that farm looks like my house 🏠 cheers bro
@flyawayfpv3 жыл бұрын
Bought one after seeing the video. Thanks JB!
@MCsCreations4 жыл бұрын
Not bad! Not bad at all! 😃 The price is pretty good! Fantastic review, Joshua! 😃 I love those micro brushed quads! Stay safe there with your family! 🖖😊
@nyclassic4ever1302 жыл бұрын
I'm Joshua Bardwell and you're going to want something today.
@sandraeldred15803 жыл бұрын
The updated LiteRadio 2 SE Radio Transmitter doesn't program with OpenTX anymore and is supposed to use a self-developed LiteRadio System instead. BetaFPV says" the new LiteRadio 2 SE Radio doesn't use Opensource OPENTX any more, it was replaced by Customed LiteRadio System, it can not support to program any setting." However this LiteRadio System software doesn't seem to exist. How are we supposed to set up the SE radio? This doesn't seem like a real improvement.
@StreamStationAlpha4 жыл бұрын
5:40 The face of a know it all ;) Another great video JB!
@veek27674 жыл бұрын
The Lite Radio 2 is a beast. It was my first legit controller and I think I'll stick with it. I am a Tiny Whoop pilot primarily. Not interested in bigger drones really. LR2 is perfect.
@TipsyMountainMakers4 жыл бұрын
Completely agree! I'm also primarily a Tiny Whoop pilot and I love my Lite Radio 2. I've considered upgrading but just can't see a reason why i should. This one is compact and does everything I need it to do. I even added a bit of grip tape to it which looks nicer than just plain stark white and is actually functional. Really great radio.
@veek27674 жыл бұрын
@@TipsyMountainMakers I'm glad I did not get a giant controller. I know its frowned on to use 'game controller' looking ones but it fits my thumb style. I've tried hybrid not a fan. I was checking out the higher end controllers that look like game pads but I still think the Lite Radio 2 is pretty good for what I need.
@TipsyMountainMakers4 жыл бұрын
@@veek2767 Yep, I agree. I'm a thumber as well and this works perfectly.
@slowentropy45314 жыл бұрын
Had so many sent back with defects unfortunately, some work great... others don't and its just the RX board. Say about 30 or so in 100 sales....
@veek27674 жыл бұрын
@@slowentropy4531 Did you check what mode you were in? D16 wont work with tinywhoops.
@whimpydogfpv86634 жыл бұрын
Love the Hummingbird!
@staticfpv8814 жыл бұрын
I HATE RACING . BUT This would be the only type of racing I’d do. Been thinking about it 🤔
@heroflying4 жыл бұрын
I just don't get the $50 price as compelling. As soon as you buy a set of motors when the included ones wear out, you're pretty much at Mobula 6 or Hummingbird Pro pricing, and then you have to keep doing that after X amount of hours flying over and over and over. If you like how it flies? Sure, I get that, have at it. But this is the exact reason I moved away from brushed in the first place - no turtle mode, which allowed me to finish second in a race because the third place pilot in question was flying brushed motors and crashed, and you have to continually replace the motors.
@heroflying4 жыл бұрын
I just remembered, the third place pilot I beat WAS RABFPV. He and Tanner Rush were dueling with me a distant third, RAB crashed, couldn't turtle mode, and I came in second. I didn't even know who they were at the time. lol
@desertleo42974 жыл бұрын
Great video buddy👍 keep up the great work
@ByteOfSilicon4 жыл бұрын
Purchased one based on your review. Did not last long. 5th flight when I connect a battery 1 motor runs as soon as battery is connected. and can not arm. Opened support case with NewBeeDrone, on Friday, will have to see what they say.
@JoshuaBardwell4 жыл бұрын
Everything has a non-zero failure rate. I trust NBD will take care of you.
@ByteOfSilicon3 жыл бұрын
@@JoshuaBardwell I wanted to comment that NewBeeDrone did take care of the issue. Sorry I did not put this out here sooner, but did not want anyone to think that they left if unresolved. Customer service too care of me!
@ethrrr4 жыл бұрын
What about Santa whoop (with silverware).. for me it is still the best quad at home. I have some brushless 65mm whoops, maybe it is my fault that I can't tune them right, but my santa whoop is better. Longer flight times, more durable..it doesn't stick on walls. It doesn't have osd, but you can configure beeps for range and battery on the radio. Greetings from Bulgaria :D
@ProjectMockingbird4 жыл бұрын
If you are DIY, the Santa Whoop (and others) can fly just as good as the Hummingbird, but you do have to know how to unlock the FC, program and flash it. Unfortunately you just can't flash this hex to just any Silverware quad as NBD has some custom code in it for their hardware. My very first Silverware FC was an E011
@KmanRuffian4 жыл бұрын
I would guess it’s just the slower and less authoritative response of the brushed motors that helps with banging into things... I remember my brushed whoop builds being better at smacking into things even with betaflight because the brushed motors just don’t respond as quickly/aggressively as brushless motors...
@ProjectMockingbird4 жыл бұрын
It’s a little more complex than that but since brushed has less power you can max out motor power in a manner you can’t in brushless and it will recover much faster. The “silverware spin” and it doesn’t work when you go brushless.
@doctormax31294 жыл бұрын
Are you doing to make a Video when the bruschless one comes out
@silverspork864 жыл бұрын
the 20 people who disliked this video probably wear a mask in their car when driving alone.
@OscarTRob4 жыл бұрын
I don't get it. I've seen lots of people do that. Is it uncool or stupid to not get ill?
@philthayer40874 жыл бұрын
I also wear a rubber alone in car.
@Nine_8833 жыл бұрын
Getting some pretty good flight time too.
@magnatracker3 жыл бұрын
I cant get my stick inputs correct for this whoop on my taranis qx7. My right stick is controlling throttle with up and down. Right stick side to side is pitch. Left stick up and down is roll. Left stick left and right is yaw like it should be. No matter what I do in the settings on my taranis the inputs stay the same
@pnaty974 жыл бұрын
Turtle mode is essential, really sad this doesn’t have it. My brushed Inductrix does and it saves so much walking. If they added that I’d buy one.
@tenToesUp7474 жыл бұрын
This is the equivalent of pitbike racing in motocross. A few likeminded friends and an openminded bar owner, and we’ve got ourselves a party!!!
@ProjectMockingbird4 жыл бұрын
It's probably the same atmosphere too...competitive, but hard to take TOO seriously at this size
@Muddyorphan18124 жыл бұрын
Omg he's adorable.,,the mini human on ur back pretty good looking drone too I've hated all whoops I've tried and smoked the board on my non brushed one first time I tried to iny hawk..,is he acting hawk or like snake eye hawk or some kick B name¿¡🤩
@ghttboi4 жыл бұрын
"goo goo gaga subscribe to my daddy" i'm dead ahahaha
@The-Opium-Den4 жыл бұрын
Very interesting quad. I'd prefer to wait for the brushless version myself.
@benfoust14 жыл бұрын
there is a brushless version
@ckauffman95164 жыл бұрын
@@benfoust1 please post the link for the brushless Mockingbird Edition
@benfoust14 жыл бұрын
C Kauffman newbeedrone.com/collections/newbeedrone-bnf-kits/products/hummingbird-f4-1s-brushless-bnf
@ckauffman95164 жыл бұрын
@@benfoust1 you're silly that is not a Mockingbird Edition!!
@benfoust14 жыл бұрын
C Kauffman yeah it is... read the title on the website
@bennedictbyy4 жыл бұрын
Am I able to connect this to Jumper T16?
@keaganlindsay76484 жыл бұрын
Look at the fresh cut. 💪
@chapz86274 жыл бұрын
Silverware handles great on Brushless too.
@cnbsdad4 жыл бұрын
Awesome video like always but the baby part was so cute !
@griffinhabermehl93124 жыл бұрын
Love the new hip music Joshua
@zacbarnes90754 жыл бұрын
Finally something not 5”!! I’d love to see more whoop up to 3” content! Definitely down for more of this content. I don’t like or fly 5”
@user-tq4di3kh7c4 жыл бұрын
+1
@flyinginbraillefpv18194 жыл бұрын
@zac barnes why dont you like 5 inch?
@michaelo90714 жыл бұрын
In terms of brushless whoop racing, what whoop would you recommend for an experienced whoop racer who wants speed and agility?
@umbratherios56144 жыл бұрын
with the way laws are going, I think these tinies are the future, unless people get off their arses. these things are awesome
@CSClark2724 жыл бұрын
I've come to really trust your product reviews. Bout to order one of these!
@unclescooby5764 жыл бұрын
How is everyone doing. Hope you're well
@slowentropy45314 жыл бұрын
Well, alot of indoor flying here in Australia. Have had a chance to fly a fair few whoops though:)
@quilllooo4 жыл бұрын
UZ65 with mockingbird emuflight config JESC 48HZ. Try that, a beast...
@MichaelDFPV3 жыл бұрын
Oh dang. You have to replace the motors after a few hours of flight?
@gyulasoos98653 жыл бұрын
This thing is awesome but the tuning feels extremely sensitive for a beginner. It would be nice to be able to dumb down the settings. Mine just flew into the fireplace...
@CrazyTech2004 жыл бұрын
This or mobula6 hd crsf with the mockingbird software?
@ValFPV3 жыл бұрын
Either this or the mob6 NON HD. The hd one is waay too heavy for indoor racing/''freestyling''
@dubzsquaredfpv71714 жыл бұрын
Is the forthcoming brushless version going to be Silverware too? They're already got the brushless Hummingbird at an amazing price. I can't imagine something better and cheaper.
@AGILISFPV4 жыл бұрын
Really great value for money tbh. But if you have about 30 bucks more, get the nbd brushless pro
@bradsarno82034 жыл бұрын
Can you actually adjust rates via OSD as you mentioned? I have the non PMB version of brushed HMB, and I don't see any way to adjust rates. OSD screen looks identical to what you showed here.
@bentimiday91233 жыл бұрын
Hey I was going to buy an fov drone and already have a transmitter but I have no idea how to know which drones it will be compatible with does anybody know how I would find out
@garyfrancke11273 жыл бұрын
i got the DSM one. I got it bound with my nonupgraded Spektrum Dx9 and found the arm switch. I tried multiple times to enter the osd with those stick moves without success' I need to get to the FC section to see the switch mapping. Can anyone tell me which switches on the Dx9 are for flight modes? I'm stuck in wild acro mode i think
@MadMike784 жыл бұрын
Just order it using your links!
@CF_Joel3 жыл бұрын
How does the brushless version compare, now that it’s here?
@trevorimpulsebuyguy63984 жыл бұрын
WInter is coming... and 45 bucks? For a drone that performs this well? I can look past having brushed motors for that. Besides imagine beating someone in a race with a meteor 65 or a Mobula 6 with humming bird, that covers the cost alone.
@ProjectMockingbird4 жыл бұрын
haha, show up with your BFPV Lite 2 radio and the H-bird, beat everyone and walk away. Priceless. And in a lot of local races it is probably a reality. Silverware just wont' crash. :)
@theshazman4 жыл бұрын
Josh, I got the V2 of this working with CRSF but my sticks are all sorts of whack. Throttle is on the right stick (left/right instead of up and down) and everything is beyond messed up. Where did I screw up? The flight model on the tango? My channels? I'm trying to figure this mess out but I can't find much information on the newbeedrone site and they haven't really responded to any of my emails.
@JoshuaBardwell4 жыл бұрын
Fix your channel mapping in the receiver tab. Rearrange the a E t r letters to change the channel order.
@theshazman4 жыл бұрын
@@JoshuaBardwell Are you referring to the MIXES tab on the Tango Model? Or somewhere else?
@MadMike784 жыл бұрын
I got the remote and the hummingbird. I tried to fly it but the right stick seems to be super sensitive. One movement of the stick and the hummingbird darts off. Is there a way to adjust this?
@zombie38333 жыл бұрын
New to the hobby. Ive decided to go with the DJI headset for my 5" build. Would this mini whoop work with the DJI headset or would it require an analog headset? Thanks
@jakeh31444 жыл бұрын
Why couldn't this video come out 3 days ago? Just bought an Eachine Novice-i
@earlhelm5154 жыл бұрын
Well if it is all suppose to work out of the box, I can't get anything to bind or work. No instructions on how the switches come set up, can't get the quad to bind, not sure if the bind button is on the receiver or on the board, the video from Newbee shows it on the board, but the receiver covers up the spot where it shows in the video...Thought this would be a fun set up to carry around, but I can't seem to find any info on what I am doing wrong, or not doing. So far, a waste of money.
@JoshuaBardwell4 жыл бұрын
Contact NBD support.
@earlhelm5154 жыл бұрын
@@JoshuaBardwell Sorry to be such a dumb nut, but I finally got it figured out. Thanks for all you do. Love the bird by the way....
@reyreyna35553 жыл бұрын
Ok got it already..insanley too fast for me .. now how do i slow the rates down? I thought you mention it was in the osd... but yeah i dont know how...do you have to flash it or do you have any other vids to do so...
@28daballa4 жыл бұрын
Brushless and I'm sold on it!
@phor85104 жыл бұрын
brushed motors gotta be replaced after 50 hours??
@schmutztimo89524 жыл бұрын
Great video, did you forget to colorgrade the footage?
@AndrewBlanche3 жыл бұрын
Is there not cli mapping to get turtle mode to work properly for whoops. Once upon a late night I think I read it but can’t find dam thing again. Lol. Just was it switched which motors were used to flip quad than what stock turtle mode does.
@JoshuaBardwell3 жыл бұрын
Brushed whoop motor drivers usually don't support reversing. I believe there are one or two that do it but not many.
@alexv3054 жыл бұрын
I have a flysky fsi6s transmitter and I want to use it with a newbeedrone for acro practice, is this possible without soldering on a new receiver to the newbeedrone?
@000qwj62 жыл бұрын
hi i am a beginner can you give me to tios what to buy to make this but budjet please
@lorensw2103 жыл бұрын
i almost smashed my laptop screen flying like that in my house lmao
@nomad70954 жыл бұрын
My first drone parts are arriving in 8 days and I don't know how to set up properly
@AdamKouse4 жыл бұрын
Then you're on the right channel. There are full build videos that Joshua does that can get you up and going.
@nomad70954 жыл бұрын
@@AdamKouse thank you
@truefpvblood1584 жыл бұрын
Dang!
@661FPV4 жыл бұрын
Remember Rambo whoop? Where is Benedict???
@ProjectMockingbird4 жыл бұрын
I think he had some family issues that made him not have time for the hobby as much. He was a HUGE influence on my entry into quads, and because of him I still love micros more than almost anything else. The Quadfather indeed. :)
@padillaz3 жыл бұрын
Who is that playing on the track during the demo flight, anyone know?