Thanks a million. I don't have buttons on the steering wheel, but I purchased joying's handheld controller. I previously had only one Key wire hooked up and could only get the volume to go down. Once splicing the key1 and key2 wires together it worked perfectly for Joyings handheld steering wheel volume controller without the steering wheel controls and I was able to program the rest of the buttons. Programming is a little tricky and it took a few trys to get it right for the remainder of the buttons.
@SemiAutoMedic2 жыл бұрын
Glad it helped
@lesjohnson3716 Жыл бұрын
Thank you so much bro! I been trying to get that steering wheel control to work for the longest!! Again thank you!!!
@Greg907312 жыл бұрын
I was able to replicate on 2007 Honda CRV EXL. Thank you!
@SemiAutoMedic2 жыл бұрын
Our pleasure. Glad it helped
@harlanholmes92647 ай бұрын
Thank you. This video helped me today 👍🏾
@MatthewTaylor3 Жыл бұрын
Thanks for posting this. In your case, was the KEY1 and KEY2 on 2 separate harnesses for you Joying head unit? I have a2016 Honda with a Metra connector which I'm also retrofitting a XTRONS android unit in. The difference is that KEY1 and KEY2 are on two different harnesses, so I wasn't sure what the difference between the two were
@adammedina33403 ай бұрын
Its people like we need to make it happen thanks bro
@joelopez69042 жыл бұрын
Thanks bro you save me from I won't say who cuz she's right next 😂😂😆😆😂😂
@TheRichardclay7 ай бұрын
This a great video but I cannot find one video that shows how to identify the Steering Wheel Control wire in the vehicle wiring harness that Key1 and Key2 connects to. Can you help me. I have A 2011 chevy silverado with premium sound. Thank you
@janjohnny4945 Жыл бұрын
My steering wheel control on joying is dead, it works perfectly fine with the factory radio. It worked before and after I have added amp, but suddenly it stopped working.
@voidstudios8317 Жыл бұрын
do you have a link for where you got that harnes my car has steering wheel controls but sadly the harnes doesnt bring the 19 and 20 pin socjets to the other side or maybe some advice on what pins i would need to do it myself
@nocallaghan12 ай бұрын
Thank you, I couldn't find the ground for the steering wheel buttons,
@lodiprideprimitives11 күн бұрын
On a Honda Ridgeline it is pin 5
@maxin3231 Жыл бұрын
Where the black cable (ground) wire from the radio goes? To that loop?
@sasaz1989Ай бұрын
i bought a wheel control and i connected the wires but its not working for why
@masonballard64022 ай бұрын
Mine comes with three wiring harnesses, and one is just for key2 and ground do I need them because I don’t use the buttons on my steering wheel and they were never originally connected, so do I not need them?
@ashleyarocho43862 жыл бұрын
Can I use key 1& key 2 together and then ground the brown wire to the raido ? Because I have key one and key 2 to the correct brown & red wire but on the headunit the volume keys won't stop going up or down. Does that mean I have to grownd that brown wire from the factory?
@SemiAutoMedic2 жыл бұрын
Yes
@MrMountainHawk8 ай бұрын
Can you summon Siri with the long press on voice button?
@vancuong9842 Жыл бұрын
The Teyes android I can do same ?
@MatthewTaylor3 Жыл бұрын
What's the difference between KEY 1 and KEY2 ?
@SemiAutoMedic2 ай бұрын
All of the different buttons on your steering wheel control are just providing a different resistance feedback to that particular wire. So based on the resistance that the wire sees on the radio and knows which button you're trying to press
@MatthewTaylor32 ай бұрын
@@SemiAutoMedic I understand the resistance for the buttons on the steering wheel. I just want to understand why my head unit has a Key1 & and Key2 as opposed to just a single wire.