"The line isnt super straight, but neither am I..." 😆

I have a Suzuki Carry and I'm still using these Acty videos as a learning point. Great job!

Watching this all the way from Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿 in the UK. Amazing videos keep up the good work

Looks very good! I painted the entire outside of my Hijet mini truck with two gallons of gray Monstaliner polyurethane bed liner, rolled on with 4" textured roller for the rough bed liner finish and with 1" brushes for the trim. I still need to paint the interior with the third gallon of Monstaliner but that will be a job for late spring or early summer. It was a pain working around the cool weather, rain and short days to do the exterior bed liner painting in the fall. The Monstaliner is a two part bed liner. Once mixed, there is maybe two hours before it cures so it's imperative to do all of the prep in advance. I sanded with maroon ScotchBrite pads and wiped with acetone to remove any dust and oils. I used the expensive yellow 3M automotive painter's tape. It gives a cleaner line than the blue house painter's tape. I've had my Hijet for a year and am only halfway finished installing the upgrades that I bought. I just 3D printed a custom battery cover that I designed and installed it. Maybe I'll get the seats reupholstered and the heated seats installed before the cold winter weather arrives. I need to remove the old Dunlap street tires, power blast the paint off the rims, powder coat them and install the new Yokohama Geolander tires. Lots of LED auxiliary lighting to install, as well as the Atoto double DIN Android stereo, remote keyless entry, etc.

It turned out so good! Truck is coming together nicely

Nice work Jules… That truck is badass!!!!

I just bought an exhaust for my van. It was 78$ new but cost close to $300 to ship to USA. You can get one of those smaller aftermarket ones if you want the loud exhaust, or go to a custom muffler shop and have them fab something for cheaper.

Love it I can't wait to get my mini

I put a galvanized steel sheet over the load bay of my truck.Smooth surface,and protects the truck floor.I just touch in the paint every year,which I painted grey,

It looks way better!

Great job! Looks terrific! I wanted to see how easily that rustoleum liner went on. You can get that muffler fixed at a muffler shop for around $100 here in NC anyway

Did you consider using the remaining part of the 2nd can on the welded joints under the truck to prevent rust? Especially since it won’t matter about the color difference or on the light bar just behind the cab?

You should have used a paint roller

Pro tip for any future painting projects is to use the green FrogTape brand. Those scotch blue tapes are hot garbage you almost never get clean lines.

Bruh i want an acty too

How did that stuff work out?

have found it is better to roll on that type of bedliner.

I'm sorry, but while I commend your initiative and "can do" spirit, this is a rushed, sloppy and half hearted effort. Truck should have been masked, taped, sanded, wiped down with acetone and primed. Product should be rolled on with a 1/4 nap roller, not brushed. If the bed gets used, it will be coming off in a matter of months because it was not chemically bound to the substrate