I’m flying the T-lite V1 with my DLG. I swapped in a momentary switch and am a pincher. Its been the perfect DLG radio (small and light).
@robertd65411 ай бұрын
I want the Jumper tx…. Great review!
@jlarson42 Жыл бұрын
My main radio is the tx16s MK11 with elrs built in. On my 2 whoops I was using a cheapo radio, kinda sucked. So the Jumper T lite v2 4 in 1 is now my whoop radio. When my external elrs module gets here it'll be a backup radio for my micros and racer fpv quadcopters. Really would have preferred a momentary switch, but so far I'm very happy with it.
@RCVideoReviews Жыл бұрын
Good to know. Thanks for the first hand info.
@sjc491511 ай бұрын
I want the Jumper T-Lite!
@sp00fman1 Жыл бұрын
Thanks. I noticed flashing breaks it. Wanted to get rid of heli-tab, but i can wait till next relrase. The rubber coating seems to ne silicone based, as nothing sticks to it. No epoxy, glue or cyanoacetate. I scratched a pad clear to glue on some grip pads. Works great. Neat little transmitter for in the backpack.
@RicardoSynaps26 күн бұрын
The v2 ,when bricked shows a " no SD card" u have to watch the video on, how to unbrick jumper T Pro, u have to take the back out and press the tiny button together with the 2 button and the start together to enter firmware update
@gabrieladominguez.5025 Жыл бұрын
Please how see in theJumper t lite the trasmission power?... in the video is no clear the imagen.
@MrZeek101 Жыл бұрын
Great review John it's kind of hit and miss for me too they had a long time before the last one to V2 to come up with better switch and button placement. As for the module adapter I'm a little standoffish also lol. And standoffs going to be the really only way you can correct that take care
@RCVideoReviews Жыл бұрын
I agree, they had an opportunity to improve like RM did with Zorro. Shame they didn't make a few updates to the ergonomics.
@pilotandorc29223 ай бұрын
Olá, comprei um desse versão Elrs, qual melhor versão posso atualizar hoje?
@FASTFREDDIE-R.C. Жыл бұрын
Looks like it would be great to use while kicking back on the sim for thumbers.
@RCVideoReviews Жыл бұрын
Yeah, ELRS has a BT Joystick option. So this could be a very good SIM radio.
@peteryoussef8263 Жыл бұрын
It will be great if you review the Matek PWM receiver 👍👍
@RCVideoReviews Жыл бұрын
I need to get them installed in planes. Soon...
@rctips1763 Жыл бұрын
Thanks for sharing! I hope ELRS and this radio get to Europe too.
@RCVideoReviews Жыл бұрын
You can't order it from Banggood with delivery address in Europe?
@rctips1763 Жыл бұрын
@@RCVideoReviews Sure we can(with all the taxes...)! But I want regular suppliers and guarentees here, makes it even more accessable :-)
@PinkeySuavo4 ай бұрын
@@rctips1763 and the price will be higher then :P
@remolukas6792 Жыл бұрын
great Video, Thx
@RCVideoReviews Жыл бұрын
You're welcome.
@lagz89 Жыл бұрын
I have the original jumper t-lite, which model should I buy to support ExpressLRS?
@albaniansuperiorshqipetari80557 ай бұрын
8:15 I only see Flash Button and do not have the BUILD AND FLASH option on this configuration latest configurator iam using I'm using v1. 6.1.. What do I do? Anyone?
@RCVideoReviews7 ай бұрын
ELRS removed local builds a few revisions back. Now, all binaries are just downloaded from the cloud and flashed.
@matthmbg Жыл бұрын
I followed this and many other guides, but i cannot get this transmitter to work. The one thing that stands out is my Internal RF will only allow me to select XJT D16 and my External RF is set to CRSF. I would have thought the internal RF could be set to CRSF ?
@RCVideoReviews Жыл бұрын
Did you look in your system->hardware page and ensure the Internal module is set to CRSF?
@Piper_Pilot_Ventures2 ай бұрын
my Serical VCP wont show up. I only have joystick and SD/ pls help
@RicardoSynaps26 күн бұрын
U need to flash that again, do not delete the F: drive or touch it
@AntonFetzer5 ай бұрын
I bought a t-lite V2 but it does not have the SD card slot. There is a slot in the plastic case, but when I try to insert an SD card in there it just falls into the case and disappears.
@AntonFetzer2 ай бұрын
@AlexLeeping It doesn't
@AntonFetzer2 ай бұрын
@AlexLeeping I tried different cables. I also disassembled the radio and found no SD card slot on the PCB. It seems this t-lite radio has no storage.
@AntonFetzer2 ай бұрын
@AlexLeeping OK, so there is a memory chip soldered to the device? I will try again to find the correct driver
@gliderriderАй бұрын
After being away from the hobby for a decade, I have no idea what’s going on here. I can’t imagine someone new to the hobby.
@AntonFetzerАй бұрын
@@gliderriderI am trying to get into the hobby, but it is very confusing. I don't understand why I need to manually flash software to my controller. And the instructions don't work, because the controller I bought does not seem to have any storage. At least I haven't been able to find it neither in software nor hardware.
@joswelhm Жыл бұрын
I have de same tx an RX but I can't bind, same version of ELRS and bind phrase. Help me
@RCVideoReviews Жыл бұрын
If you're 100% certain you have the same revision of firmware and the identical bind phrase, you'll need to open an issue on the ELRS github. I've never had a failure to bind when the firmware is the same on both tx/rx and the bind phrase is the same. I don't know what your bind phrase is, but maybe try something simple to test like 123.
@ilhamismail2908 Жыл бұрын
im stuck at loading
@Luisgarcia-il5wyАй бұрын
Same ....Didi you fixed it?
@danielkopp-0000Ай бұрын
is it normal that my jumper dont have a ad slot?
@RicardoSynaps26 күн бұрын
The v2 doesn't have SD card reader, it has 500mgb internal storage more than enough
@RicardoSynaps26 күн бұрын
Whatever you do do not delete or touch the F: drive
@albaniansuperiorshqipetari80557 ай бұрын
I have a Jumper T lite v2 Elrs version, on my transmiter on tools menu if i press enter to load the Express Elr, i get a error >>Script panic not enough memory
@user-zt7ow3xb8y3 ай бұрын
If i habe the Elts Version do i need a extra Transmitter?
@kjroberts947210 ай бұрын
mine always says failed at the end
@RCVideoReviews10 ай бұрын
Then you're doing something wrong.
@RicardoSynaps26 күн бұрын
The v2 DOSENT HAVE SD CARD READER, If u get a " no sd card " it means u brick the controller, to unbrick jumper T lite v2 , JUST WATCH THE VIDEO, HOW TO UNBRICK JUMPER T PRO, but use the settings for the Jumper t lite v2