How To Install LED Strip Lights Under Bookshelf (LED Bookshelf Lighting) DIY

Рет қаралды 167,272

4 жыл бұрын

Step by step tutorial on how to install led light strips under bookshelf/bookcase! A fun & easy DIY project for everyone to enjoy! Light up your life and mood with LED strip lights in your home!
Achivy USB LED Strip Lights -118 in. (Currently unavailable)
amzn.to/2qJUY23
Govee LED strip lights -16.4 ft.
amzn.to/2RurSOs
Strip Light Mounting Brackets
amzn.to/2KPHecU
4 Color 33ft 10m RGB Extension Cable
amzn.to/2Zh40k6
Anbes Soldering Iron Kit
amzn.to/35LlVBN
Rosin Paste Flux
amzn.to/2PNXKNH
Fine Wire Solder
amzn.to/2sNLJyy
Adjustable Helping Hand With Magnifying Glass
amzn.to/3747Gs9
Heat Insulation Silicone Repair Mat
amzn.to/2Mk3Nai
Klein Tools Wire Stripper / Crimper / Cutter
amzn.to/2QbX2Zt
3/8-Inch to 1-Inch Spade Drill Bit Assortment
amzn.to/2s0bkEA
Vinyl Electrical Tape
amzn.to/2Mhs1lK
INCLUDES - 118 inches RGB LED light strip with 39 inches LED controller USB cable and 17 keys RF wireless remote. The led light strip to create a romantic home theater , display 20 fantastic colors, 20 dynamic modes, 5 brightness and 10 speed setting, dimmable, and can remember the previous color setting
REDUCE EYE STRAIN - With increasing screen time, eyestrain and headaches have become more and more common. The bias lighting save your eyes and prevent unwanted headaches in both children and adults by reducing the contrast between the brightness of the TV and the surrounding room.
ADVANTAGE - High quality and brightness leds, control with RF remote, the remote control distance is up to 49ft, and you don’t need to point at the led controller while you control. The tv light strip use orginal 3M adhesive backing tape, it is very thick and sticky, and will not fall off easily
USB POWERED - DC 5V 3A, powered by USB, can be plugged into TV, TV BOX, USB Hub, Computer, Car etc, please note for a small part TV USB port might not supply enough power, or you can simply use 5V 2A-5A universal USB wall charger to power instead.
Follow me on instagram! @JumperManTech
For all inquiries E-mail JumperManTech@Gmail.com

Пікірлер: 98

@kishaedwards309 3 жыл бұрын

This is one of the best tutorials that I've seen. You were very detailed, and you showed every single step. There was also no background music to interfere with the tutorials. Excellent job!

@20mmRainFPV Ай бұрын

Nice video! Future soldering tip... add solder to the pads (and tin the wire) then connect the wire to the pad.

@Khalia333 2 жыл бұрын

I know this video is 2 years old but this was exactly what I was looking for lol. Perfect video and perfect timing!

@SithlordSigma 2 жыл бұрын

tip for the future if you still do this stuff years later, pre-tin your cables before you solder them, makes your job a million times easier without all the strands everywhere. I mod game consoles and use different types of wire, aaalways pre tin.

@Spencer67 4 жыл бұрын

I’ll never do this I just like watching you do it looks great man

@JumpermanTech 4 жыл бұрын

Haha I hope you do it or something similar in the future! It's a great learning lesson and its really fun. Thank you so much! I really appreicate your feedback & support. Happy new year to you & your family!🙂 Stay tuned

@husseinali2734 3 жыл бұрын

😅😅😅 same thing bro

@aniym21000 4 жыл бұрын

Awesome video. I don't know anything about electrical stuff, and have always wondered how people set up cabinet lighting without a ton of wires everywhere. You did a really good job of showing the steps in a simple and clear manner.

@BoKnowsDiddly 3 жыл бұрын

Love this. I plan to do something similar on a bookshelf I plan to get for displaying my statues of my favorite comic book characters. I also plan to add LEDs to my Arcade1Up cabinets. This showed me exactly what I need to to know to do it.

@saintallison 2 жыл бұрын

How'd the project go?

@sublimechimp 2 жыл бұрын

You turned your bookshelf into a whole concert. Awesome

@dredwardcarvalho7875 3 жыл бұрын

Thank you putting together such a well-thought-out and instructive video on this subject. And thanks for providing links-everything was very useful!

@frankies1717 4 жыл бұрын

I absolutely LOVE this video. Jumperman is really for the people!

@JumpermanTech 4 жыл бұрын

Yes!!! Vote for me🙂 Led lights for all!

@izzybell11 4 жыл бұрын

JMT it's stunning !!! As always well explained. I understand that whoever will decide to install these lights should have knowledge of doing so. Safety first. Thanks for sharing. ⭐️⭐️⭐️⭐️⭐️

@JumpermanTech 4 жыл бұрын

Thank you so much! So glad you found the project stunning🙂 Always best to do a little bit of research before starting a new project. Thank you for watching and for your support. You're the best!

@Nate0624 3 жыл бұрын

great video. Very polished DIY. I will be doing this with my media cabinet where I store my vinyl collection.

@tobywillmott3878 4 жыл бұрын

Well shot. Perfectly explained. Great video!

@westleywest7259 4 жыл бұрын

Thanks Jumper! Excellent!

@rachelfajardo9640 4 ай бұрын

Awesome tutorial. Thanks!! Gonna use this to set up uv strip lights for my uranium glass collection

@skyrimmarvel8282 4 жыл бұрын

Best tutorial No need fancy background music Like the video already Thanks for the tutorial If you add wifi connection.. You can change color or using alexa to change it

@lightsout3608 Жыл бұрын

Very clear instructions. You are goated. Thank you!

@Boss-tf6if 4 жыл бұрын

"its the moment of truth" *ad*

@JumpermanTech 4 жыл бұрын

Hahaha! 🙈🙈🙈

@JimmyPageTV 3 жыл бұрын

and we fall for it every single time

@crow7580 4 жыл бұрын

This looks amazing... I am going to do this for my son but for a gaming station for retro consoles and new consoles too... cheers for the vid 😁

@PsychoSainten 4 жыл бұрын

How did it turn out I'm about to do the same for my game collection

@alexeytech1495 4 жыл бұрын

Great idea for my collection displays. 👍

@JumpermanTech 4 жыл бұрын

100%! Would look amazing for a display case

@VXTivkot 5 ай бұрын

wow bro this is so cool

@odiousmelodious2410 Жыл бұрын

great job man, this is exactly what I was looking for

@antonydandrea 3 жыл бұрын

You make the soldering look so easy

@pecora31 Жыл бұрын

Best tutorial, you really save my day, bro. Love you!

@beck8590 9 ай бұрын

Great video! Thanks for the help.

@velosiped135 3 жыл бұрын

Great video. I'll be using it to help in my project. Question though...my setup will be roughly the size of four of the units you're using. Can I have one remote control as many as 3 or 4 controllers? Thanks!

@willentertain8062 10 ай бұрын

Good job man!!

@nicolerennie 4 жыл бұрын

WILD!!✨✨✨

@JumpermanTech 4 жыл бұрын

Wild thornberrys! Thank you for your feedback🙏🙂

@I-Khan75 6 ай бұрын

Nicely explained! Subscribed…!!!

@seitanmcnuggets5638 Жыл бұрын

Great vid. Is it better to run the lights across the front middle or back. My shelf doesn't really have a lip to hide them so I was thinking middle or back.

@clarkss12 4 жыл бұрын

Exactly what I was looking for............ thanks......... Liked and sub'd.........

@JumpermanTech 4 жыл бұрын

Awesome! Thank you, I really appreicate your support & feedback! Sending blessings your way from NYC

@KarelleDIY 3 жыл бұрын

Good Job

@db5112 6 ай бұрын

Nice tut. So I have to drill a hole if I want to through

@cinnamonstar808 3 жыл бұрын

THANK YOU

@getreal3336 4 жыл бұрын

Thumbs up on the video AND for the ad placement. "And now for the moment of truth" ...BOOM!...ad placement. Lol

@rfieldng 3 жыл бұрын

What shelves are those would go perfect in my cyber lab

@nbbistudent7 2 жыл бұрын

Nice video, very detailed. Are you using 1 remote to control both LED strip kits? Or did you have just 1 kit that you separated/soldered to cover the linear feet of both shelves and just need 1 remote to control all the shelves? Thank you!

@JumpermanTech 2 жыл бұрын

Thank you! I'm using 1 remote to control both kits and there's nothing special you need to do for it to work that way. Thanks for watching!

@VII-1-VIII 3 жыл бұрын

Are there any other color led strips more simpler to install on bookshelves?

@mugwai52 2 жыл бұрын

What brand/model led strip did you use? Where can i buy the same one?

@evansanders3054 7 ай бұрын

They make quick connectors, no soldering required

@moumitadas6563 2 жыл бұрын

Good education diy

@nobody-qt1pk Жыл бұрын

LoL on the wiring definitely some hvac there. wiring up a zone board to dampers color code everything

@novafilmcompany 8 ай бұрын

Am I right in thinking if you have connecting "clamps" you don't need to solder ?

@JumpermanTech 8 ай бұрын

Correct. Thanks for watching!

@jonnymac31 4 жыл бұрын

Cool man

@JumpermanTech 4 жыл бұрын

Thank you so much John! Your feedback is greatly appreicated. These lights completely transformed my living room🙂 Sending blessings your way from NYC!

@jonnymac31 4 жыл бұрын

@@JumpermanTech next project is the van! You'll love it. I put under shelf lighting in my van and when I'm working when it's dark out it makes all the difference.

@JumpermanTech 4 жыл бұрын

@@jonnymac31 That is an absolutely great idea & I actually installed these same lights in my work van! It really does make all the difference. I put 3 rows of lights and made a video on it. I absolutely love it! Thanks man! Link to van led light installation🙂 kzfaq.info/get/bejne/nqead9amxLmVlJ8.html

@JumpermanTech 4 жыл бұрын

@@jonnymac31 I'm an HVAC/R tech 🙂

@tobes1902 3 жыл бұрын

Do you know if its fine to run multiple T clips to connect LED strips with a extension cable running down the side?

@JumpermanTech 3 жыл бұрын

Sure, I don't see an issue. Every light strip has its own specifications as to how many you could connect but you'll be okay👍 Your electrical is protected by a circuit breaker worst comes to worst🙂 Thanks for watching! Stay tuned for new videos

@mohammedjawadhussain783 3 жыл бұрын

Having a question whether the connection is series or parallel👍??

@JumpermanTech 4 жыл бұрын

LINKS FOR PRODUCTS USED IN VIDEO! Achivy USB LED Strip Light-118 inches (Currently Unavailable) amzn.to/2qJUY23 Govee LED strip light -16.4 ft. amzn.to/2RurSOs Strip Light Mounting Brackets amzn.to/2KPHecU 4 Color 33ft 10m RGB Extension Cable amzn.to/2Zh40k6 Anbes Soldering Iron Kit amzn.to/35LlVBN Rosin Paste Flux amzn.to/2PNXKNH Fine Wire Solder amzn.to/2sNLJyy Adjustable Helping Hand With Magnifying Glass amzn.to/3747Gs9 Klein Tools Wire Stripper / Crimper / Cutter amzn.to/2QbX2Zt 3/8-Inch to 1-Inch Spade Drill Bit Assortment amzn.to/2s0bkEA Vinyl Electrical Tape amzn.to/2Mhs1lK

@stevosteverino7602 3 жыл бұрын

Disco bookshelves. Helpful video, but the dancing changing color program is too much -- for books and knick knacks. Thamk you, This video helped me visualize my project (just white dimmable bookshelf lighting)

@dc5330 3 жыл бұрын

Have you thought about using join screws to connect the shelves? The gap sets off my ocd. You could have also been able to run 3 long rows instead of 6.

@dc5330 3 жыл бұрын

I just noticed you would have to cut the lip at the top side of each shelf in order to get it flush which is why I'm guessing you skipped it

@dabigdikdangler 6 ай бұрын

Yeah, I'm not doing all that. I'm going to stick the lights to the back of the billy bookcase frames in a continuous loop so they don't show but glow, then keep the bookcases an inch from the wall, but still screw them in place and hope for the best.

@codysingleton4960 11 ай бұрын

60/40 solder/ 40/60 I can't remember exactly which will make your life exponentially easier. You won't have any need for the Flux or any of that jazz. On projects like these I've never even bothered with it. Look for a better solder and your projects will go much faster and smoother. Pre-tin the strips and pre-tin the wires. You'll be golden, pony boy.

@JeskaRain 2 жыл бұрын

I hope the leaners have been addressed by now.

@Mr.Thermistor7228 Жыл бұрын

bro get HEAT SHRINK for those connections!!

@diceflawless9115 2 жыл бұрын

Is there a way i can do this without having to solder?

@TitanMediaMarketing Жыл бұрын

Yes, there are clips you can buy for LED strips that connect them together. Like these here a.co/d/aKuJkWA

@TitanMediaMarketing Жыл бұрын

Or these if you want a setup like the video a.co/d/932U4L7

@jupamoers 2 жыл бұрын

Pre-soldering the wire is what every electrician learns during the apprenticeship^^ But it's a good advice for every non-electrician out there

@johanness6545 4 жыл бұрын

Most soldier has already got flux in it

@JumpermanTech 4 жыл бұрын

That definetly makes things faster & cleaner! Thanks for the tip. Next time I will buy that type🙂 Appreicate the feedback! Have a great day

@dotnetdevni 7 ай бұрын

i just dont see why ikea dont make lighting as an option

@Big_Krone 10 ай бұрын

This is dope but incredibly extra lol

@calebprenger3928 2 жыл бұрын

lol you can buy premade connectors on amazon. why on earth would you need to do it this way? Also, why on earth would you buy the one with protective coating for more money when you can buy the cheaper ones to achieve the same thing?

@beatingupautorepair3122 3 жыл бұрын

I need help with my led lights ‼️‼️🤦🏽‍♂️

@JumpermanTech 3 жыл бұрын

Whats up? Thanks for watching!

@barrybailey9991 4 ай бұрын

Why add those wires? You could have used connectors and saved a lot time and effort.

@josed6841 3 ай бұрын

Flux cleans the metal…

@ilovebuns9502 3 жыл бұрын

this is so much work... i feel defeated. SOLDERING WHAT?!

@BackDaws 3 жыл бұрын

Why are you soldering the wires ? 🙄

@brianmorrison4330 6 ай бұрын

Flux friend, flux

@Efand 3 жыл бұрын

This is electrician's sh#t run

@tashadfowler3465 4 жыл бұрын

That's a lot of work when you can just buy the clip connectors with and without wires.

@JumpermanTech 4 жыл бұрын

I got the clips except they came in the wrong size for the 10mm lights I had. Although the clips save a ton of time, they get loose over time and need to be adjusted. I've used similar clips for 90 degree turns. Soldering does take much longer but it lasts much longer. Thanks for the input and for watching! Happy holidays🙂

@srg42787 3 жыл бұрын

Can I ask both of you what you mean by “clips?” Also, what size/type of wiring did you use for this? Thanks!!

@FeelBetterNowChannel 3 жыл бұрын

They are called solderless led clip connectors.

@richlenoci3302 2 жыл бұрын

Sorry man but you are teaching very bad soldering techniques to your viewers. Those are poor connections, no pre-tinning on the pads, and your exposed wires are cut too long. Everything might have worked this time but either you got lucky or they are going fail eventually. Please realize that I mean this as constructive criticism and not an insult.

@Tchairdjian Жыл бұрын

My thoughts exactly