June (Pt 1) Kimberbell Cutie Table Topper - Use DBJJ End-2-End Embroidery to Quilt the Topper

Рет қаралды 12,623

2 жыл бұрын

In this video, I'll show you how I used a #designsbyjuju End-2-End machine embroidery design to quilt the topper. It turned out awesome!
If you'd like to stitch along with me for the Kimberbell Cuties Table Toppers, here are the supplies. You can source your own fabrics and use up your scraps!
DIME Print and Stick Target Paper - www.shop.dzgns.com/products/p...
Get your Monster Snap Hoops here (On Sale June 2022): www.shop.dzgns.com/?p=S1z1p1FgS
Kimberbell Cuties Pattern Book - bit.ly/3FayfNM
Kimberbell Cuties Embroidery CD (Uses a 6x8 embroidery field - this will not work in a 5x7 hoop) - bit.ly/3E3L2Qr
Designs by JuJu E2E Design - www.designsbyjuju.com/more-be...
►Get Embrilliance Embroidery Software Here - bit.ly/3j8aKej
Brother PR1055 X 10-Needle Embroidery Machine - www.allbrands.com/products/98...
Brother Machine PQ1500SL - amzn.to/3C2lJPr
True Cut Rulers - amzn.to/340QkR1
Pellon SF101 - amzn.to/3Mdu87e
DIME Stitch Ripper - www.shop.dzgns.com/collection...
All notions found in this video series can be found in my Amazon Store - www.amazon.com/shop/powertool...
Brother ScanNCut SDX325 - www.allbrands.com/products/10...
Simply Applique Software - US Customers - www.allbrands.com/products/65...
Simply Applique Software - www.allbrands.com/products/10... - www.allbrands.com/products/97...
GET KEITH'S SEAM RIPPERS HERE - powertoolswiththreadstore.com
►Get Embrilliance Embroidery Software Here - bit.ly/3j8aKej
►My Amazon Store - www.amazon.com/shop/powertool...
►Our Store (Seam Rippers, USBs, Decals, & T-shirts) - powertoolswiththreadstore.com
►Send Me Mail Power Tools With Thread 14414 US Hwy 87W, Ste 3, Box 114 LaVernia, TX 78121
►Send Me eMail powertoolswiththread@outlook.com
►My blog - powertoolswiththread.com
►PTWT FB Page: - / powertoolswiththread
Some of the links above are affiliate links where I make a small commission at no cost to you to help support our family business. Thank you for using my links!

Пікірлер: 49

@debbiekieffer8218 2 ай бұрын

Very helpful for me to watch you do this!!!

@marilynm.329 2 жыл бұрын

Really glad you showed the option for edge to edge. It doesn’t take away from the appliqué or add too much to the finished look. Cool!

@marilynm.329 2 жыл бұрын

Oh look! In one of my replies I got one of those fake notices/scams that Becky talks about. Beware!

@susandt3856 2 жыл бұрын

One of your best videos yet! I learned so much. Thanks a bunch!

@Renuewspa 2 жыл бұрын

I was not using my hoop correctly! I can’t wait to try this method! Becky you understand us so well!

@debbiechittick4755 2 жыл бұрын

Your instructions are always so clear! I appreciate you so much.

@melissabroussard1042 2 жыл бұрын

Thanks for the E2E tutorial - never thought of it that way.

@lauraruthruff4741 2 жыл бұрын

I am so happy you did a video on this.. I wanted to do edge to edge quilting on mine... But I just couldn't get it to work out for me.. So on my next table topper... I will try this!! ☺

@conqueringmountscrapmorewi2509 2 жыл бұрын

Hello! After a hectic but fun day, it is so nice to sit and watch your video. I hope you have a joyful week ahead. Thank you for sharing this video and your time.

@PowerToolsWithThread 2 жыл бұрын

Thank you too

@teresamcbrayer2549 2 жыл бұрын

Becky Thank you for explaining that. I have some DBJJ e2e also I've already messed up one table runner.

@suzyprickett9759 2 жыл бұрын

Hi Becky. When I print out my E2E design, I put a snowman sticker on the center crosshair. Then when I go to stitch it out, I use the “find the snowman” button (technical term, I know 😋) It’s quick and I know my design is 100% straight. Then if I want to double-check the beginning and ending joins to make sure they’re spot on, I use the projector and advance the machine to those areas. It works like a charm.

@PowerToolsWithThread 2 жыл бұрын

That's another great method! I guess I should have mentioned that you could use a snowman sticker (and yes, your technical term is correct! to me anyway lol) . Letting folks know about the DIME Target Stickers works for those stitchers that aren't as blessed as you and I to have a Brother machine. :)

@gmab4758 2 жыл бұрын

Awesome instructions! Thank you

@jillcaperton1568 2 жыл бұрын

Great video. You explained and showed edge to edge very well!

@amygonzalez1144 2 жыл бұрын

Your amazing! You make it look so simple.

@PowerToolsWithThread 2 жыл бұрын

Thank you! 😊

@maryannbaughman215 2 жыл бұрын

I used same quilting design but didn't have your logic for size. Thanks for that tip!

@conniel.4601 2 жыл бұрын

Thank you so much. More edge to edge videos, please...

@sandracopeland5649 2 жыл бұрын

❤️❤️ your learning videos!!

@PowerToolsWithThread 2 жыл бұрын

Thank you 🤗

@helencain6981 2 жыл бұрын

Love the tape dispenser who makes those adorable learning so much from video

@melissasofia4041 2 жыл бұрын

Thank you Becky! What size hoop are you using please? Thx!

@bugzz2901 9 ай бұрын

Great video! Two things you mention. When you printed the E2E somehow the center crosshairs printed, what made this happen? Also when you printed the E2E, this was on self adhesive paper, where is paper from? Thank you! 🐾🐾

@scottydog6539 2 жыл бұрын

I have a question for you Becky. Why are you not using batting? You mentioned shrinkage.

@PowerToolsWithThread 2 жыл бұрын

If I need to wash it, batting will shrink and then it might get lumpy. For a topper, if a glass of something were put on it, it might not be steady. The Pellon 987F is a synthetic that won't shrink so less wobbly if washed.

@theresazachert4786 2 жыл бұрын

Where did you get the magnetic flower holding you scissors on your shirt. I’ve been looking everywhere on line.

@angelamcgovern1525 2 жыл бұрын

Thanks for a fantastic video. Did u only apply sf101 to the white fabric.

@PowerToolsWithThread 2 жыл бұрын

Yes, only to the white fabric. It really isn't needed in the rest of the project and you can't tell in the overall hand of the finished topper that there's a backing on just the white fabric. Thanks!

@susanrudman2693 2 жыл бұрын

Thank you for this video! Two questions…. While I haven’t tried this yet, I really want to try e2e with small projects like this. From what I’ve read, for quilting, the bobbin thread should be the same weight as the top thread. Is that true? I don’t know the DIME products, but the Brother pre-wound bobbins I use are 60 wt and my embroidery thread is 40 wt, so I thought I’d need to wind my own bobbins to keep the thread weight the same. I’m really new to quilting, so I’d appreciate your help on this. My other question…. Which size hoop did you use? That hoop looks AMAZING!

@PowerToolsWithThread 2 жыл бұрын

Thanks for these great questions! You really only need the same weight of thread if your project will be seen from the back as well as the front, such as in Free Standing Lace (FSL). On this table topper, that's not the case so I just used a DIME pre-wound 70wt bobbin with zero problems and your Brother pre-wounds would work as well. That hoop is from DIME and all magnetic hoops are on sale this month so it's a great time to grab one - they only go on sale about once a year. That is the 10x16 for the Brother Luminaire or Baby Lock Solaris. bit.ly/3xTAZO6

@brendarainwater6049 2 жыл бұрын

Good morning Becky, thank you for this video. I do have 2 questions I can't work out. I understand the start stop position on the sides but how far down/ placement for rows below? I'm not understanding for some reason😢 also I don't have embrillance for cross hairs to print, so you know if my BES4 or PE Design 11 will print them? I hope this makes sense😊

@PowerToolsWithThread 2 жыл бұрын

Yes, both BES4 & PE Design 11 will print cross hairs. You can also download Embrilliance Express, which is free, and it will print for you as well. As for placement between the rows, I just set the template where the top part of the stitching in the template wasn't too far away from the row above it so that it didn't create a noticeable "channel" between the rows and I still had enough to go off the bottom edge a little bit. Hope that helps!

@brendarainwater6049 2 жыл бұрын

@@PowerToolsWithThread thank you soooo much! Yes, this helps immensely.. I had a feeling it was judging by sight for distance. Do you have a link for that program?

@melodyb1287 2 жыл бұрын

Don't you have to make sure the fabric is straight in the hoop too? Yours looks like it but how did you do that? Or am I overthinking it and as long as your design is straight it will be ok.

@PowerToolsWithThread 2 жыл бұрын

You do want to make sure the fabric is fairly straight to begin with in the hoop but it doesn't have to be exact when you have a machine with a camera system. Once you have scanned the hooped project into the camera, you can then alter the alignment of the design on the screen to match the target sticker. Instead of moving the fabric to match the design, you move the design to match the fabric. Love camera systems!

@teresayerbury3273 Жыл бұрын

I heard dropping it will break them over time! 😳

@PowerToolsWithThread Жыл бұрын

Well...dropping anything over time will break it. :)

@vmadar62 2 жыл бұрын

Can you use pre-wound bobbins in the Stellaire XJ1

@PowerToolsWithThread 2 жыл бұрын

You sure can! The bed of the Stellaire is almost the same as the Luminaire and I only use pre-wounds. :)

@vmadar62 2 жыл бұрын

@@PowerToolsWithThread Thank you very much!. I really appreciate your videos they have been of great help to me. Keep them coming !!!

@karendvirnak5269 2 жыл бұрын

Does edge to edge work well on lap size quilts?

@PowerToolsWithThread 2 жыл бұрын

Yes! It's works great on them. :)

@sandracopeland5649 2 жыл бұрын

Where can I fine the paper you used to quilt the sides of the table topper before you appliqué the watermelons 🍉 !!

@PowerToolsWithThread 2 жыл бұрын

Right here! www.shop.dzgns.com/products/print-stick-target-paper?_pos=1&_sid=52b175103&_ss=r?p=S1z1p1FgS

@lidabard2121 2 жыл бұрын

Something weird going on. No intro it starts with your voice in the middle of a sentence?

@PowerToolsWithThread 2 жыл бұрын

Sorry, issues with my audio editing in my software. Apologies.

@yvonneedwards5221 2 жыл бұрын

Hi Becky i cant find your email address ???

@PowerToolsWithThread 2 жыл бұрын

powertoolswiththread@outlook.com