Here is “One Guy” who gets the job done!👍👍👍

OMC Cobra.... OMC dumped an absolutely insane amount of R&D into that outdrive, gimble housing, tilt trim and the shift interrupt, they almost lived, they got the contract with Bayliner but didn't make enough in other sales to stay afloat, they were holding on by a thread for years and finely sold out to Volvo / Penta and that very outdrive is an incredible success, renamed the SX. Anyway, to say that parts for that outdrive are discontinued is a bit of an over statement, in tact and ready for service, it will easily fetch 1500 dollars. the 4 banger is an Iron Duke, they still use those in boats, forklifts, generators and cars, they are inexpensive long lasting little engines with a decent amount of torque. The boat was a POS the day it was made, everything about it is the cheapest available. Surprisingly enough this had the benefit of lightening up the hull by a about 30% of it's leading competitors .... God, i'm so ashamed that i know so much about these boats

People don't understand the amount of hard work and time this man is putting into our entertainment, thanks bro. I just found your channel yesterday with ypur newest video recommended to me out of the blue. Also, one part of this video brought back some vivid memories of my ex girlfriend, any guesses? lol

You deserve every follower you have Chris! I like watching your videos a lot, thank you for working hard to make them

Good video. There is something so satisfying about putting a new, clean sets of wheels and tires on an old trailer. Gives me motivation to get back to work on the broken boat that I shouldn’t have brought home either. Haha.

Cuteness over load with the squirrel, he’s lovely.

I don't know if he got the 50,000 views in the first seven days he said were needed to make him spend money on the boat to make it run or not. But he sure surpassed that mark now!! LOL. As of a little less than a year later it's at 776,805 views!!! Right on NNKH!! You're Awesome!

Love the boat videos. Amazing stuff to watch!

This squirrel is so nice. I didn’t think you could pet one. This is fresh.

Your like the New England version of a bush mechanic. It’s a term for the gnarly northern Australian people who do anything to fix a vehicle. Makes for very entertaining content!

Good stuff. I have the same engine and it's nice to see it opened up.

I admire you're not afraid of some hard work. It's becoming more and more rare nowadays. Got my respect for sure bud!

hihi squirrel steals the show so cute

I like the squirrel hanging out while you work..

Gotta love those 2.2 engines! I have one in my 3/4 NASCAR

these are my favorite types of videos! good stuff man

That is the good thing when you are a bad ass mechanic. People and insurances company throw things up because they don't want to deal with them and you can come, fix them, keep them and re-sale it ..

Regretting bringing home "junk" cracked me up. Sometimes I'm like..."why do I do this to myself"

If we keep it, what shall we name her? The Trashliner? Lol

Leo is looking healthy!!! That boat not so much but hey for free you really can’t go wrong regardless of what you do with it. Thanks for sharing. Would be cool to see if it would actually fire👍🏻

OMG i wish we had squirrels here in Australia .... i so love them

I love this content ❤ I'm really excited to see more videos just like this! 😃 Subbed!!!

Very good work on the “trash liner

Looks like a 3510 starter. You can probably get one at a junkyard for $15.00. You might even have one laying around. Came on tons of GM products from the late '60s to the late '80s.

The hull looks good , the iron duke will never wear out . Just the glass on that thing is 300 to500 bucks . I would strip it down and build the interior .

Master!Much greting from Serbia!

For a rust locked engine, or one that has rust in a cylinder, before trying to start it, put some white vinegar in the cylinders, let it sit for 30-45 minutes and usually will unfreeze and as the vinegar dissolves the rust, helps free rust stuck piston rings, and gets a lot of the rust out of the cylinders, gives your rings a better chance after an oil/fuel mix startup. try it, use an engine you thought was so rust stuck it would need disassembly to repair, then you can really see how well it works. might leave it in that type of stuck engine an hour or 2, even overnight.

I’d yank the engine and out drive , steering cable and wheel and switches and cut the boat up but keep the trailer also ! Basically strip it so another boat may live ! Haha 😂

Thanks for getting it out of our yard!!!

The first 6 minutes or so were pretty satisfying.

Yeaay LeO!! shout out from Scandinavia

Yesss another boat restoration

You’ll get it! You always do.

Love project s like this 💯 👌

So happy to see a new video come up! I love your videos dude! I just bought a box of cookies from Wawa so I know what I’m doing later!

Dude! I’m impressed!! You are not afraid of a challenge.

I like it. Thanks for this clip!

All that's left of that boat is the hull, engine and some of the instruments may be okay. The wood inside the transom may even be rotted out and need to be dug out from the inside, then re-glassed. All the flooring and other interior structures have to built from scratch. Huge job. I rebuilt a 17' Sunbird, another OMC boat. Not as far gone as that one, but it had stuff growing out of the carpet also. I was lucky it had an outboard, in good shape on mine. But that inline 4 may be okay also if it will run.

Leo is living the life! Great job with the video. We can't wait for your next one!

Great job .

100% we want to see you do the impossible. Dam right I want a part 2.

OMG that’s my boat! I was out of the country and thought it was stolen! I never had it registered in my name so they couldn’t locate it

LEO IS KING !!

I bought an 88 bayliner Capri that needs a new exhaust manifold and manifold elbow riser cause there’s a water leaks where the gaskets are between the two. Looking forward to getting her back up to par though, 120hpf on the water would be great this upcoming summer🤙🏾

Absolutely loving your content also learning alot

Good work man , i am extremely motivated

Oh man....that Kawasaki! Sweet 😋

You're lucky those cables didn't come back into the windshield when it broke off trying to get this boat out. Wow

I have built boats for 14 years between several companies: Seminole Marine (Sailfish and Southwind boats) Edgewater Power Boats, Brunswick (Sea Ray line) and everglades. I would love to find some of these freebies you have or at least one to restore. Kudos to your efforts and work.

It just amazes me how you beat the crap out of your Toyota and it just keeps on tickin'.

thanks for teaching us mecanic

Beautiful to see a Kwaka LTD sitting there in your garage !!!!!

Fun to watch

Nice job Chris!

Fun video!

New driver . Lol dang near took out that stump

Yes I'd like to see a part two on the boat.

Awesome

We had one of these. It was an 1988 or 89. I can't remember. It had the 3.0L 4cyl. Something like 135hp (I think). Ours ran great and we never had a problem with it. But we took care of it and never left it out in the elements. Only thing we hated about it that I can remember is that it was loud as hell. We sold it about 7yrs later and aside from a little UV fading of the dash it looked and ran great.

~PART 2: kzfaq.info/get/bejne/ZtGAZqd909KmfYk.html NNKH Hats/Merch: kzfaq.info/love/YAcr-u-BLGIrtUImT2_Elwstore

after seeing your vid I would have let the local council pick it up for disposal. I know Its sounds harsh but that Sir is life.

Sweet!! I see the baby squirrels growing up pretty big! Love you channel dude you're pretty awesome!

The boat that thought it was a submarine!

Get the starter!!! You'll then have 2 swamped motors running again. Doooo it!!!

kinetic ropes are the bees knees lol saved me many times

I say make a u pull it run for a similar starter that will bolt up and video tape it. People will like seeing the junk yard and the search for good parts. It’s kinda like hunting for rusty treasures. Lol. If it runs then strip the interior and sell it as a project. Or it could be called dumpster fire and you keep it for river exploring.

Love the earthquake air ratchet !

Shes got the FRAM!!!!

Very cool 👍🏻

You should do a video on what to look for on a jet ski

Bayliner,s make the best flower pots. You can find these everywhere mostly used for garbage cans after they stop running which in most cases is relatively quickly do to owner lack of maintenance after the first season. What I love here in Michigan is the high school graduates that post the trailer for sale but you have to take the boat, which costs about $50 bucks per ton to dispose of. But usually the trailers are in no better condition because the were mass produced, cheap with a short life span especially if you didn't invest in a quality cover to keep the water out. LMAO. I restored a 1987 Chaparral villain ll only because they are still sought after. Cost a lot, broke even, won't do it again because I Hate Hate Hate fiberglass work. And it has to be done right.

Look up under the manifolds for a crack in the side of the block before going any further. That's where those motors cracked when they froze with with water in them

Gloves bro, Gloves!

We need more of Leo

Go for it

Ah another boat, the Bayliner2000, probably sitting in the woods with rusted engine since 1982 :D .... Unfortunately this boat cannot be saved, but maybe there is at least a limited edition David Hasselhoff cassette in a tape player somewhere in the cockpit that can be salvaged and sold on eBay. And Leo is already waiting full of curiosity what the next barnfind (or forest treasure) will be. I am jealous of this tame squirrel - it is so cute!

got mine for $250.00 bucks every one said these are trash ! ;[ I still have it its been 7 years since I got it very easy to maintain I'm very happy with it .

old trailers and boats are fragile, gentle pull will save from extra work. But I guess whatever is left of that boat is in good use.

Honestly. Walk away when you see OMC the outboard. I do appreciate the effort and Leo

Leo is so cute!!!

Hoping for part 2

dude , that's my boat !!!🤣 olny kidding

It would have been good to see part2.😊

Glad I found this channel. 😬

I had this exact same boat. Those motors are nothing but problems. Gas is 2 days old and it doesn't want to run properly. Use it as a reef marker

Just checking back in want to see that 50k!!!!

Very good at all times and the other one was..

Tá aí um canal que assisto mesmo sem fala inglês mas te distrai do começo ao fim se vira corre atrás ,essa veio da enchente, restauro raiz .

@10:26 - We own a couple of chinchillas. They're like a cross between a squirrel and a puppy. Most lovable little creatures I ever owned.

What did you do? Love it. Been there, done that. Great video.

Nooooo!!!! We want to see the Trashliner live! I will send u a starter, cap, rotor and plugs.

Wow this gives me hope to get my seadoo boat going that's been sitting for a few years. That thing was really rough lol

Nice

Nice! let's see me more!

I like to see more on the boat

A Salvage yard starter might do the trick!

Nice sweep job on the tire change, your mess, you cleaned it up... memba the last vid or so?... have a good one and great content NNKH.

Those starters always failed and the replacement could not get wet in a boat lol!

Good work on your “trash liner”. I am in need of aOMC 3.0 carb. Do not matter if it works, 2 jet rodChester. Let me know,

Another option based on what you said. If everyone wants to see a part 2?, Then let them chip in and pay for the starter. Me included When you get enough money, ya buy the starter. Just a thought.