Waited so long for this thought the neighbor got you locked up 😂😂😂

That INTRO!!! Thanks buddy!

I know there is probably a big difference in frame but the 99-06 did the same on my 85 impala and the speed engineering c10 longtubes cleared perfectly.

That thing is gonna b a blast to rip around

Great work, brother... Wish to see it completed one day

Looking good 👍👍

Cool cars both going to be badass

Think you should scratch the black. Go flat red and call it the Phoenix! Literally rising from the ashes

Those motor mounts are the Buick mounts and it looks like they were moved for the Olds motor that was in it. But either way your swap mounts are for a Chevrolet engine location.

Good shit homie!

good stuff

That motor looks so much like a 455 Olds. The valve covers were similar, and the gold paint was standard.

Awesome! You used my name for it!

Nice brother 😊

Swaparoonies galore! Thanks for sharing.

We need more S10 cheap thrills content!

You have enough room to put the HVAC Box back in. Ride in style with Heat and AC.

Sweet 😎

You get the eBay pan check the pickup to pan clearance. I just messed with one a friend bought and it was almost 2" from the bottom of the pan. Only one I've encountered so far but dbl check it to make sure.

I have used the flat plate moto mounts that use rubber isolation mounts. And you can use square tubing for frame mounts.

This video reminds me that I need to make time to work on my Chevelle...

Dude, that set up looking all raw and mix matched in that car screams widow maker.

I love the fact that you’re using corded tools on myself like wicked battery powered tools so I bought a bunch of Milwaukee M 18 stuff and when I’m working on cars or whatever every time the battery runs out so I went back to my corded tools

Looking good, 55 Chevy moment was LMAO,...rock on Josh....🙂👍🙏

Come man, we need a new video.... Hope all is well..

Thanks for the update. It would have been so sweet if the driver side header would have worked. Glad you decided to Mach up the engine first. Solid floor pans are overrated anyway 🤣😅🤣

What's crazy, I recently acquired a 72 skylark post car. It's bombed in black and primer as well. It's already mid LS swap but I'm thinking of dropping my 5.3 Lt in it. This build just like your others is gonna be awesome

Them old buìck motors were torque monsters I had a friend mile that I played pool with in the pool leaugè he had a GS with a 455 and he ran with my 70 LS6 chevelle and his car was bone stock. Very nice car

I am surprised a 4L80E trans will not fit easily in a Skylark trans tunnel due to the fact that those where designed to fit a Turbo 400. I guess the LS swap is the cause of that.

Can't wait!!

Speed engineering sells headers for these cars but If you got the 1-1/4 forward Holley mounts you just have to tap the front primaries a bit to fit or they hit the crossmember. Nothing like the s10 though.

Yes bop style motor mounts are annoying idk why they made it different from Chevy and gmc

Good video

Definitely will be a sick build. I know what it’s like building on a budget. I just wished I could’ve kept a lot of the stuff around that I had but over the years I’ve just given it away because my garage was getting to Cluttered

Buick motor has different location on mounts. Cross member is different or holes are. Fought that battle a couple of times.

Gonna be sick!

So when you decide to put a turbo on that 1 can I buy the blower. Lol

Algo

should you bolt up the trans to find engine loctation ? what trans you runnin ? gonna be sick......

🤙

Death row for the win💪💪💪💪💪🇺🇸💯

Bring the fiero back 😢

Must be warm in the shop cause it ain't outside it's cold in mine hard to heat up when it's 20 degrees out the new truck looks good when you went by the other day

What blower bracket is that?

Are the stocks 14 or 15 inch wheels? They should be worth a couple hundred bucks

What brackets do you plan on using?

Bro, You gotta paint the LS Buick Red 👍🏼

So, idk if you'd be interested or not. But I have a HEALTHY Buick 455 in my 70 skylark. 76 short block with 70 heads, TA212 CAM, Hads have been shaved some, S-divider intake.. motor has Round 10k miles on it. Very reliable engine.. no bs. The Buick was my daily driver until the converter took a shit. BUT! IF you was interested.. I'd be willing to trade you my drivetrain for an LS swap drive train. Runner for runner. Just needs converter. Which if need be I'll take care of before potential trade. You can hear my 455 running on KZfaq.. fatmatts garage is my old channel handle. I'm wanting a turbo LS build for my Buick... Would just rather see my 455 go to a good home. And if you had it, I could watch the progress. I would like a th400 trans if possible. If interested, lmk.

Your not answering my question. On your said motor city . Detroit or Flint Michigan area.. spider current is are in Grand rapids in Michigan. I'm out of Flint Michigan.gord

Just paint the door we don’t want to see it run , just one color haha

Death row fo sho my guy my son said dad that looks like the death o duke from GTA I said wow I was thinking death row bc ya know it fits it so well but I see I wasn't the only one thinking 🤔

Get whatever products you can when it comes to building cars. Half of motorcycle product aren’t US made.

Did you just name the car Death Row 16:48?

no no no stop putting chevy in buicks

They don't fit because it has a Buick in it not a Chevy

Blowers are for cavemen

Buick Gs Ls

Why you keep saying engine it’s a motor