Hey Pete! We love ALL of your videos. Working on equipment, doing chores, or just pontificating. I really wish you wouldn't concern yourself with the negative comments from the peanut gallery. You are an impressive person. Most of the negativity comes from people can only try to down what the capable have created. You just keep doing things the way that YOU want to. We will keep watching. Thanks for what you do. Best wishes to you and your family .

Even a Deere guy has to say she looks, starts, and runs fantastic. Well done Sir.

And we have Pete, another satisfied customer! We see that satisfied smile, knowing that it was done right. Thanks for bringing us along on this journey.

I grew up in a tractor mechanic shop in the 60s and 70s working on vintage tractors like the super C. Watching you restore this beauty really brings back memories. You did a great job and yes that is a lot of work but worth every second in the end. I feel like I should sit by the TV and Waite for Ed Sullivan to come on with a glass of Tang now. LOL

Awesome job Pete she’s a beaut! You’re making us farmall folks proud!

Fantastic job! I can almost smell the fresh paint and rubber. Super jealous-my old C has not run in probably twenty years. Now that I’ve retired I’ve ordered some parts to rebuild the carb, distributor and added a one wire alternator and change over to 12 volt. Thanks for being meticulous and recording everything so I can use it as a guide!

Pete, I am a Deere guy, but I have really enjoyed the journey of the restoration of this Super C. You have documented it wonderfully and it looks perfect, and the fact that it fired right off is proof it runs as well as it looks. I admired those who save the old iron, especially in todays age of high horsepower computer controlled , auto steer tractors. Keep up the great work and videos. God Bless

Well done Pete, we are so proud of you and so happy for you. Mom and I have completed watching the playlist for this restoration. We call it re-Pete!

I’m not a farmer but I love restoration videos of anything old and this series was awesome. Keep up the great work

Absolutely phenomenal work Pete. This is the most invested I’ve ever been in any KZfaq content.

Bittersweet to say the least. Now we're left wondering what's next? I deeply enjoy all of the rebuilding videos! Another great accomplishment and another beautiful tractor. Love it!

I am in awe. The quality of the work done and willingness to do things the right way gave amazing results. A brand new old tractor. I love it!

Really fantastic job, Pete. You should be very proud of the quality of your beautiful craftsmanship, and attention to detail. It is a truely marvellous experience, to be a part of your restoration projects, from start to finish. Can't wait to see her gliding through the fields on a bright sunny day, and her owner reaping the rewards of his efforts. All the very best from the UK 🇬🇧.

What a beautiful job you have done. You should be proud.

Been waiting weeks for this moment! That was an EASY start!! Props to the labor that made that happen - it REALLY looks nice Pete.

My childhood tractor. Loved the hum noise it made when in road gear going down the road past my girlfriend's house. I wish I had one just to hear that noise again and a cool wind in my face headed back to the farm !

Bravo Pete! Seeing the Super C start a nice way to begin the weekend. Best wishes to you and family!

Superb work Pete, loving the end product. Now you have another good tractor to work turning the hay season. Maybe you can do the service for the 756 in the future?

Thank you for showing the complete tear down and rebuild of what is now a beautiful machine, Your ability to teach as you go is amazing to this city folk, may the tractor be shown at local farm shows,

Start up on first pull. What a proud moment! It looks beautiful.

I haven't watched the video yet, I just wanted to say thank you for your videos. They're really helping me with research and motivation to begin my own farm. I hope yall are having a good day! :)

Beautiful job on the super c. . Absolutely amazing and sounds great.

Excited to see/hear it run! Nice work Mr. Pete! She purrs like a kitten! 👌

Good job, this Super C rebuild was a very enjoyable series to watch. Came from a farm that had a Farmall Super A and an AC WD45. I was the younger boy so I got the Super A for my jobs. I absolutely loved that little guy. I think my favorite task was cultivating corn in the summer. Pete watching you work the farm and caring for your livestock is my morning meditation session on many days.

I like to think that we imbue the things we work with in a way that passes on our strengths. With this rebuild, precision, heart, and steadfastness are all there when I hear the Super C running. Nice work.

Absolute Perfection‼️ Patience in all things. We see in these teachings and the way he cares for everything he meets or greets!

Absolutely enjoyed the series! It is great watching the Tractor Master work his magic! You remind me of my dad. He restored P47s and P51s in the Army Air Corps. Watching you is like a journey back in time. Thank you for sharing your extraordinary gift.

So glad you decided to Restore/overhaul this little old tractor! I firmly believe you will see many more years of good service out of it! They were meant to be used! By the way, man...that engine sounds so smooth! Great job again!

Another successful restoration! Came for information on my '41 H. Stayed because I enjoy your content!

Great job Pete the Farmall Super C should give you many many more years of service.

This series has been intensely satisfying to watch. I have watched each episode at least twice and I think you really knocked it out of the park.

From antique clocks to tractors, I don't think there is anything you can't fix. Amazing!!!

Loved the series. You should be very happy with the results.

Pete the C looks great. Thank you for sharing your love of IH. And bringing them back to life.

A pure work of art Mr. Pete!!!!!! Honestly...should you ever decide to semi retire, you should teach tractor restoration and repair. And the old girl looks and sounds beautiful.

The only thing I don’t like about this series is that it ended! Such a joy to watch. Maybe we’ll see another restoration in a couple years. Cheers, Pete.

Thanks Pete. I truly enjoyed this series and I am so glad you were willing to bite off another restoration. I have learned so much watching you go through the tractors. I have been picking away with my first H restoration (very slowly) and appreciate your knowledge and insight. I have learned a ton watching, now to get at it and work through it. I just have to remind myself, one bite at a time. Thanks again Pete.

Thanks Pete, you are a great guy, very honest, diligent, caring, you represent the best in human dignity.

Oh, she's beautiful, refreshed and will look good for many years to come. That's just part of maintaining equipment. So much is just recycled instead of renewed anymore. But the best part is the feeling of accomplishment. You did that with your own money, time, and hands. What a blessing! Can't wait to see her working again!

I am impressed by your detailed restoration. It has been particularly interesting to me because my father bought a nearly new Super C in the mid 1950's. Up until then we had nothing with something as handy as the "Fast Hitch" on the Super C. With it we could pull posts, haul things, and hook up heavy things with that magical hitch. We went to country school and all the roads to it were gravel. One of the parents had Farmall 350 with a "Fast Hitch" and when his road was very muddy in the spring, he brought his kids to school riding on the platform hooked onto the "Fast Hitch".

Successful restoration of the Farmall Super C. Looks good all around. Well done and was a joy to watch.

Amazing job. You are one heckuva mechanic, Pete. Just think, you might have given this tractor another 80 or so years of life!

Amazing job! Your old time neighbor farmers must oooh and ahh when you go by with these beauts. My dad, 82, could take apart and put a tractor back together no problem but give him a cell phone or computer and he's lost! 😂

GREAT job!!! Thank You for taking us along... Really enjoy your channel!

That’s a restoration to be proud of. Nice job!

There is nothing like good old productive recreation and that gratification of abundant preparations! God bless!

Oh that gas in the clean float bowel looks so pretty. Look! It's moving. It's alive. It's alive... It's alive, it's moving, it's alive, it's alive, it's alive, it's alive, IT'S ALIVE! I don't blame you one bit for not taking it outside and a rainy say. I would be checking the wind direction if I were to be pulling the honey wagon. Then wash and wax it after so many hours of use. I wish I could show you Brook on the Cog Hill Farm channel as she didn't realize she was petting her tractor on camera. Maybe Hillery should have been in the shot with you sitting there. It was a great moment and we're privileged that you shared it with us. Of course you did all the work but still.👍Awesome.

I am an older man and have never met someone who knows as much and can do as many things as you, You are amazing.

The tractor looks and sounds great! The Super C is definitely a project to be proud of.

Incredible work Pete! Being in the younger generation interested in antique farm machinery, this was a really educational and entertaining series. Thank You!

Thank you so much Pete. You are what America needs. I hope to know half of what you know some day.

AWESOME Pete!! Thanks for bringing us along for the ride! Keep Smilin!!!!

Being a former mechanic I truly enjoy watching you work on the old tractors. Brings back many memories.

Now it's on to the "new tractor " lol. Great job Pete! I enjoy the videos, educational and interesting. Love your care for your livestock, equipment, land, and family!

Few people find their niche in life. You are blessed and fortunate to find your place...best wishes for you to continue your path sir...thank you for sharing how rewarding and challenging it is.

Looking great!!! What a grand restoration and thanks for sharing it with us!! 🚜❤

Beautiful tractor, great job Pete! You are the master.

It has been a joy following you through this restoration!! Again I think you should do this full time!! Many thanks and keep up the phenomenal job!!

You now have probably the nicest Super C in the USA. from one that messes with a lot of old tractors I am confident you go the furtherest in restoring one of anyone I have ever seen. Great job on restoring one of my favorite tractors ever

Hey Pete, I just wanted to say it’s amazing that you can tare down a Farmall to nothing but a pile of parts, nuts, and bolts and refurbish them and put the Farmall back together in just a few months. I am in awe of your skills. All farmers should have your skills. Thank you for sharing them with us! I’m learning so much!

Pete, you’ve done another fantastic job with detail to the tractors specs as well looks! I’m no mechanic, and could never do a job like this. However that being said I’ve learned a lot from your videos. I’m a farm boy, and would love seeing our tractors completely restored as you’re doing with yours. Thanks for always sharing the good, and the bad. I do hope that if you do put your box back on front you paint it with the Farmall colors as if it were a factory piece of equipment.

Felling proud moment 14:42 and the smiles at the end, Great work Pete

That ole/ new super C sounds good. I can still remember back in the day watching the heat come off the hood after a work out.

That engine almost rev up before Pete pushed the start button !! An other successful story. Can i say it´s Pete´s built ? Pure joy for him, us and that Super C ❤❤❤

Pete, enjoyed the series immensely. I love your attention to detail.

What is more satisfactory than seen result of a year work turning into a great success. I felt reel joy when you started the engine and heard it run so gently. You must be proud of this result. Congratulation Pete. You are the best.

Pete and Hillary, you are living the good life. I have plans to move back to my Michigan farm and live a scaled down version of yours. This makes you a mentor and inspiration. Thanks for the content.

The satisfaction of a job well done is the start up after all is said and done. Congratulations Pete! You can be so proud to drive that beauty around the farm. Well done!

Beautiful. What a craftsman. Great to see her come back to life. Thanks for taking us along the journey

Ole girl fired right up perfectly and sounded pretty darn good right away...some fine tuneing and adjustments and she's running like she was brand new....awesome work Pete...this has been a great restoration series. I do hope you make a play list out of this series so others interested in following this rebuild as a guidline for their rebuild can find all 20+ video's easily. You've done a fantastic job on this series as well as the MD rebuild.

That is a very fine example of engineering for the time at its best. Your attention to detail is mind boggling. I really can’t imagine making a machine that can work for you easier to manage. With the materials available for the time there is a certain amount of simplicity from the results of burning carbon and converted to torque.

I didn't watch the resto series, but I watched this video. The sheer joy in your face when you started it up and ran it would make anyone smile. Definitely a labour of love by the looks of it. Certainly more mechanically attuned than myself.

Really enjoyed this series, my uncle had a Super C and I drove a 200 a lot, I really liked driving them. The MD restoration confirmed what I had always heard, they were complicated tractors. The ones that were around here all eventually were left in the tree groves. The owners always said they were too expensive to repair and their performance vs. a gas M wasn't worth the price to fix. It was still great to see you restore it because of the family history. I enjoy the show and look forward to learning about and following along with your new hog raising plan.

It's nice to see you at the end sitting there proud like a peacock and you deserve it you did a hell of a good job

I can just imagine the farmer getting this new all those years ago! I love the smells of newly run engines and equipment.

Love the extra umph that the 4K gives….thanks for the GREAT EDITING 👍🏻👏🏻. Can’t start my day without Hillary & Pete…best wishes your way. Just amazed at the classic styling of those tractors…the new generation tractors are so very complex, very expensive and can only be worked on by dealership mechanics (proprietary electronics, et.Al.). Obviously Corporate Farm monstrosities 🤠 Hola from Eastern Washington State (Snake River Country)

Nice job on another tractor restoration, Pete! Thanks for inviting us along on the journey! 🇺🇲🚜👍

Great job! You nailed all the “pre-setting” on carb, timing, etc to get her to start right up like she did. I was impressed. You made her look like new and now you have her running like new as well. Give yourself a pat on the back, you earned it. She sounded anxious to get back to work so when spring comes be prepared to hang on tight! 🥸👍✅

Hello Pete. Well, I've watched you through 2 of these series and I think you've found a new hobby/venture. You're very good at these old boys and you could make come real sideline money doing these. Keep on smiling.

Hello Pete, My husband and I watch all of your videos and I want you to know how much we appreciate you. Your videos are always informative and well put together. Love the job you did on the restoration.

A big congratulations on your restoration Pete!!! All that hard work and patience sure has paid off. Enjoy the fruits of your labor. I love the fact that your restorations put these parade ready tractors back to work as they were intended.

What a great job Pete 👏👏👏 She looks and sounds great. Thank you for the videos.

I love watching all of these it reminds me of being a young girl watching my dad in the garage working on old cars and old trucks takes me back to my childhood I just love watching you and listen

Love to see you adjust all that needs adjusting by just hearing. A much underappreciated skill these days. A lot of skills have been lost because companies tend to hire a person after someone retires instead of letting him/her walk along for a few months. I had an encounter with an engineer that just graduated when a sensor signal was lost that monitors a bearing. I pulled up a screwdriver and put it against the bearing housing and put my ear against the other side telling the bearing was working like a charm. His face was priceless. Also had an encounter with a civil engineer that thought a fan was working fine "because the temperature was fine" while you could hear the fan going up and down in rpm while making a screeching noise. Since he was the boss and he was making me clear he was, I let it go only for the fan to stop working like 30 mins after because the coil was burnt. On the other hand, I had a colleague claiming that a certain hydraulic pump could hold 18A at -60°C (-76F) while being rated at 11A at operating temperature. We checked it with an IR camera and it surely held up perfectly. Oil is "a bit" thicker at those temperatures.

A great series, I learned a lot, I just whish I had a place to keep an old tractor. I am quite surprised how basic the mechanicals are, almost like a teaching aid on how engines and gears work. Don't get me wrong I admire your restoration and attention to detail, and that first start, impressive!!!.

Beautiful job Pete. Looking forward to seeing you put her to work again. I really enjoyed this series.

Pete, job well done. The old super C looks and sounds great. Enjoyed the journey. Thank you for the opportunity.

Looks beautiful, sounds beautiful, we love when you restore tractors or anything, thanks for showing us and teaching along the way

Great job Pete. I grew up on a farm in mid Michigan and our main tractors were an M and an H Farmall. My grandfather first put me on the H hauling hay wagons when I was 7. Later that year he taught me to plow snow and the next year I progressed to the drags and the cultivators. As I showed that I could handle each piece of equipment proficiently and responsibly, he would move me up to the next level of attachments as they became more complex and carried more risks. I had a great childhood and would go back and do it all again. Your videos bring back a lot of fond memories. Thanks.

Sure does look good You did a hell of a job Look forward to seeing it in the field

Man your almost gonna need another shed for all your restored tractors. Good work 👍

Thanks for videos sir !...I'm a '64 model myself...love to see you reviving and using that fantastic equipment from a by-gone era...you are preserving an important era in Amrican Small Farm Heritage..❤

Sounds and looks amazing, Pete! Thanks for making these videos, I really enjoy them. Can’t wait to see her with the old wooden tool box bolted on the front 😂.

And you should be proud Pete! Beautiful job sounds great! Thanks for sharing your restoration with us!

Pete you're right the final step is the operation of it in the field. Great job and know we all enjoyed looking over your shoulder.

Way to go, Pete! Screams of agony when the oil spilled but smiles and cheers of satisfaction when it fired right up! I looked up an old friend back in Tennessee who is RED all the way and introduced him to your channel. He has the capability to do what you do. You got high marks and I think he has been surfing all your vids, especially the tractor ones, of course. The guys will be jumping up and down when we catch up today's snow episode tomorrow! I can't wait..... 🙂

Congrats Pete! I have watched you since day one on this rebuild,and have learned a lot from you,thank you ever so much.Your Super C is a work of art.Take care, waiting on next video.🚜👏👍

VERY nice pete! Thank you for sharing your restoration project. I really enjoyed the series!

Pete, im a retired military subscriber from Japan for a long time. Love your videos and your view on life. Keep doing things the way you believe they should be done, and keep bringing the down home, common sense, family-centric values to the videos. As a bubble-head, i love seeing the contributions your father makes to your projects... hope to see him in future videos as well. God Bless.

That tractor is the most beautiful piece of equipment I’ve seen in a long time. It has the charm and practicality that is not seen much these days. I would bet that tractor is in better condition than new. Pete you have the knowledge and ability to pull it off Hilary is going to have to keep an eye on you when you take it out for a spin.