Justice Off Road MOLLE Tailgate Panel Installation

  Рет қаралды 61,688

o3djeeps

o3djeeps

8 жыл бұрын

🔔 Please CLICK THE BELL if you want to see my videos! 🔔
[ OVERCLOCK3D Jeeps | o3djeeps.com ]
This is my installation and overview of the MOLLE Tailgate Storage Panel from justiceoffroad.com. I also took a little time showing you how to install rivnuts for those who might be new to that process.
From the website:
When searching for a storage solution for our Jeep Wrangler JKU, many of the options offered on today's market did not fit our needs. Many kits offer a Molle panel with a pre determined number of storage bags, priced over $200.00. Here at Justice Off Road we chose to select top quality products and to offer each item individually to allow you to custom design your tailgate storage solution.
Justice Off Road is proud to introduce their new heavy duty "Mil-Spec" Molle Panel designed for the Jeep Wrangler JK/JKU Tailgate. This Molle panel is triple stitched heavy duty fabric made to military Type III specifications right here on the east coast. There are eight mounting points so the panel will not sag when mounted properly. All mounting hardware is included.
Contents:
1 - Mil Spec Molle Tailgate Panel
8 - Rivnuts
8 - Stainless Steel Pan Head Bolts
8 - Stainless Steel Washers
Some helpful O3D Jeeps links for you:
Most Recent Upload : goo.gl/z2AFkB
Most Popular Upload : goo.gl/y6bCWo
Check out my Channel : goo.gl/t8crvN

Пікірлер: 37
@briancrockett76
@briancrockett76 3 жыл бұрын
I HIGHLY recommend that folks installing this on a JK use a drill depth rod when drilling into the tailgate to prevent inadvertantly poking all the way through the exterior sheet metal (surprisingly easy to do). I watched another video where a guy penetrated all the way through, twice, so I thought I would just take extra care when drilling. I initially just put tape on my drill bit to gauge depth, but did end up denting the exterior sheet metal when my drill bit finished penetrating through when making the 13/32" hole. T'was just a fraction of a second, but the damage was done. It's so easy to damage the exterior sheet metal when using a conventional drill bit. Be careful! Use a drill depth rod, or other depth controlling method to keep from ruining your day.
@thelazyhiker3288
@thelazyhiker3288 8 жыл бұрын
Outstanding job showing the installation. What really made this video helpful was using that peace of aluminum to show how the nutserts work and will hold the MOLLE Tailgate Panel in place. I had also wondered about the usefulness of these panels so watching you add the gear at the end was quite helpful.
@IFHSP2
@IFHSP2 4 жыл бұрын
Just watched this for the first time. Your Jeep has came a long way.
@davidkay7389
@davidkay7389 6 жыл бұрын
Really like that setup. Wish there was a folding table option for this because I like the full use of the door panel.
@xXthatsexypandaXx
@xXthatsexypandaXx 3 жыл бұрын
Can you have this and a tailgate table?
@CtPirate
@CtPirate 7 жыл бұрын
GREAT video! I went to buy this one over the Smittybilt one and of COURSE their website won't load! I'm going to call them tomorrow.
@CrownAndMainspring
@CrownAndMainspring 7 жыл бұрын
I don't want to drill holes in my new jeep but if I were to, I would just use some good self tappers to hold that molle panel.
@sjeverett75
@sjeverett75 Жыл бұрын
Thats what other brands use. His point was this is a more secure way of mounting, supposedly.
@cheesefiend8361
@cheesefiend8361 6 жыл бұрын
I love your Jeep!!!
@RamosDominicano
@RamosDominicano 8 жыл бұрын
Another reason Justice probably didn't do a cutout for the hinge is that not all Jeeps have that hinge. I have a 2010 JKU and I don't have it. Great video as usual. 👍
@bah5310
@bah5310 6 жыл бұрын
"old lawn chair" haha, I do remember those.
@Meatpopsicle2050
@Meatpopsicle2050 4 жыл бұрын
It doesn’t come with black grommets and hardware?
@gamerbeast3234
@gamerbeast3234 4 жыл бұрын
Some people were never in the military and it really shows when the mess up molle straps...
@NYC-WRX
@NYC-WRX 8 жыл бұрын
Great video. Love rausch greek. Hope to see you there one day.
@blkmgc483
@blkmgc483 7 жыл бұрын
how that's justice off road panel holding up?
@richardgroening6960
@richardgroening6960 7 жыл бұрын
You should post roughly how many turns it took you to secure the nut
@terrencechristman7154
@terrencechristman7154 7 жыл бұрын
Can you provide a link to the bag you're using to hold the recovery strap? The one on the inside part of the tailgate closest to the tailgate hinge. Didn't see it on Justices' website. Great thorough review, looks much sturdier than my smittybilt one, tugging on those bags and it didn't seem to pull at all.
@EVERYTHINGcpo
@EVERYTHINGcpo 7 жыл бұрын
Terrence Christman it's this ome: www.amazon.com/CONDOR-MA11-GAS-MASK-POUCH/dp/B015GX9QPA Justice doesn't currently stock this bag. it works really well for my tree saver!
@_ols_race_kid_2278
@_ols_race_kid_2278 7 жыл бұрын
If I wanted to but rivnuts and do this what size rivnuts would I need to purchase ???
@lennyrf
@lennyrf 5 жыл бұрын
Hey CPO! I love your videos! Can you tell me how this has held up over the years? I’m looking into getting this storage for my tailgate on my JKU or maybe the Smittybuilt one but I want to make sure I get something that lasts. Thanks for your reply! Have a great day!
@mcplar1971
@mcplar1971 6 жыл бұрын
What size rivnuts do they send? If you can remember :)
@anythingadrenaline4515
@anythingadrenaline4515 6 жыл бұрын
Is anyone else having a hard time finding the website to buy this Molle Panel? Can anyone copy the link for me ?
@mcplar1971
@mcplar1971 6 жыл бұрын
Anything Adrenaline - google Justice off road
@traffictime5254
@traffictime5254 8 жыл бұрын
can you use a 18v impact on the rivnuts? did you try that? just curious. thnx
@briancallahan3588
@briancallahan3588 6 жыл бұрын
Will it fit a TJ ?
@MikeDiGaetano
@MikeDiGaetano 8 жыл бұрын
What bag (brand) did you use for the first aid kit with the removable velcro backing?
@o3djeeps
@o3djeeps 8 жыл бұрын
+Mike DiGaetano It's from justiceoffroad.com They sell it as a premade kit
@lloydrage
@lloydrage 6 жыл бұрын
Why can’t they make these in coyote
@IWNTYU
@IWNTYU 7 жыл бұрын
Hey bro does this brand also make the gear seat covers? kinda like smittybilt. I know I can buy smittybilt buy I prefer American products. Gotta keep our fellow Americans employed.
@traffictime5254
@traffictime5254 8 жыл бұрын
also, did you find out how much weight a tailgate can carry without ruining the hinges? again, just curious. and lazy...
@o3djeeps
@o3djeeps 8 жыл бұрын
+Traffic Time No...but lots of folks run huge 35" tires on the tailgate...so pretty much anything I put in the pouches is going to weigh much less! ;-)
@traffictime5254
@traffictime5254 8 жыл бұрын
didn't think of that. thnx
@anythingadrenaline4515
@anythingadrenaline4515 6 жыл бұрын
can you post the link to Justice off roads website for ordering. I typed it in google several different ways and nothing will come up. Would greatly appreciate it
@M70ACARRY
@M70ACARRY 8 жыл бұрын
Does you jeep ever go off road?
Functional JEEP INTERIOR UPGRADES
21:55
TrailRecon
Рет қаралды 1 МЛН
Wrangler Tailgate MOLLE Panel Installation
11:48
JcrOffroad
Рет қаралды 7 М.
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 23 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,7 МЛН
What it feels like cleaning up after a toddler.
00:40
Daniel LaBelle
Рет қаралды 85 МЛН
Smittybilt Jeep tailgate cover installation
7:22
AdventureDex
Рет қаралды 37 М.
15 WORST to BEST OFF-ROAD MODS for Protection
16:35
Ronny Dahl
Рет қаралды 282 М.
Jeep JK Rear Bumper Install
8:38
Brian Ealy
Рет қаралды 34 М.
DIY Jeep Drawer System for Overland, Camping, and Off Roading
5:58
Overland Life
Рет қаралды 682 М.
Easy Rivnut Installation!  DIY Tool
2:52
Jericho
Рет қаралды 1,3 МЛН
Installing Jeep Wrangler JL Tailgate Table [by Rough Country]
8:55
Rough Country
Рет қаралды 21 М.
#vtx1800 #колесо #дтп  сложный ремонт диска
1:00
Глобус Мото
Рет қаралды 984 М.