Glaze Dipping Experiments - Cone 5/6 Glaze Layering

Рет қаралды 113,649

5 жыл бұрын

In this video I show you the glazing of four test bottles with the same four glazes applied in different orders.
I do love thick multi-colored drippy glazes. Not on everything of course, but it can be spectacular when it comes out right. It would be even better to predictably get the same result. So, tests must be done.
The next question will be, if I repeat the test I like best onto a bigger piece, will it look the same?
Which test glaze did you like best? Post a comment and let me know.

Пікірлер: 74

@veannegilchrist9925 6 ай бұрын

Opening the kiln in the morning must be like Christmas Day❣️

@missSFDell 10 ай бұрын

Nice demonstration

@Ninasucculents 5 жыл бұрын

Thank you Justins. This is a wonderful VDO. Love it

@Sweetpixels01 5 жыл бұрын

#2 is amazing! Love that combo!

@BrokenArrowPottery 5 жыл бұрын

Great videos! I am impressed by your skill in a workshop/studio. I bet you can make, fix, modify or invent anything!!! Thank you for sharing your skill I knowledge!

@ms.montes2080 5 жыл бұрын

Very nice detailed process and video, thank you. I'd have to say this is how I like them #2,3,4,1 but really they're all very nice. :)

@doreenwood3508 2 жыл бұрын

Very cool I just love this! I'm just learning glazing this has helped thank you for sharing!

@lynnt5859 5 жыл бұрын

I’ve always done a two glaze combo, adding a third never occurred to me. Opens up a new realm!

@knightclan4 2 жыл бұрын

Cool experiment. I love videos like this one. I'd have put number 3 on top then 2. Thanks for sharing your knowledge and experience

@Dora-pu9js 2 жыл бұрын

Awesome, very helpful video, thanks a lot.

@clairebradbury11 5 жыл бұрын

Thank you, very interesting and inspiring for a newbie like me

@kposey9351 5 жыл бұрын

Nice job Justin!!!

@TariHuffaker 5 жыл бұрын

I like #3 the best. I am not wild about the pronounced bands. I like all of the colors together but more "mixed" (I just can't get the right word right now)...more like the rim. This is a nice demo. Thanks for sharing.

@b.l.a.c.k-shiva 2 жыл бұрын

Wow that last one is beautiful! 🌊✨ Peace and Health

@triciac1019 5 ай бұрын

That round bowl you pulled in from the side is sure beautiful. Thats my favorite.

@brendasad6231 5 жыл бұрын

Beautiful!

@OUTSIDEMOORE_ANDMOORE 5 жыл бұрын

They All look great

@catladylife 5 жыл бұрын

I like the color combination on all. But my favorite is #2.

@mindfuljules 4 жыл бұрын

Thank you! this is awesome:)

@Beatriz-yy6qx 4 жыл бұрын

I love all. What label and number glaze do you use?

@timclark4931 2 жыл бұрын

Cool experiment! I wondered how much difference there would be if you changed the order.

@Middlesex1957 5 жыл бұрын

I love playing with glaze this way. I could do it non stop for years. welll...... that's why I bought the house with a 30ft square garage to put a kiln in... so ... now I go in search of someone who just wants to throw pots 'till they pile up in his/her basement to the ceiling and hates glazing. Between the two of us we'll have fun.

@JustinsMakery 5 жыл бұрын

Nice! I hope you do that.

@denavess7469 2 жыл бұрын

Loved 2 best because ran .. others are nice just my preference run glazes. We can’t dip but 1 time except maybe rim in community kiln. Great project. 😊

@triciac1019 5 ай бұрын

Oh, that's too bad!

@askquestionstrythings 5 жыл бұрын

#2 is by far my favorite, #1 or #3 is second. although the inside of the rim on all of them are interesting and would be cool if that effect could show up on the outside.

@raulomarpepa7082 4 жыл бұрын

Hola! Alguien podria decirme aparte del blanco, azul, rojo cual es el color que el numero tres pone despues del blanco. Gracias

@AnhNguyen-cu2bh 3 жыл бұрын

i love floating blue glaze. and i am trying to test it. However i am having trouble. My formula: nephenline 35%, gers borate 23.5%; si 23%; kaolin 11% .whiting 4.5%; strontium carb 3; rutile 4%; ben 2%; manganese dio 2%; cobalt carb 1%. However, it is completely lustrous and flowing. can you give me any advice

@elizabethwright4843 5 жыл бұрын

I like no 2 best, lots of movement. No 1 is good too..

@willemh3319 4 жыл бұрын

like them all

@julipolito7761 5 жыл бұрын

2 is my fav

@gonzalez1234 4 жыл бұрын

No.3!

@jessiemontgomery5838 4 жыл бұрын

No. 2 has an appearance of “trees” just below the rim - how interesting.

@Halfbakedceramics 3 жыл бұрын

That was very interesting to see how the glazes react differently based on their order. The only issue is I don't have my own kiln and the place that I do it at does not allow 3 or 4 coats of glazes.

@lindalee945 2 жыл бұрын

How they are going to know?

@Halfbakedceramics 2 жыл бұрын

They will know when it flows off of the vessel because it is so thick and sticking to the cookie/shelf

@lindalee945 2 жыл бұрын

@@Halfbakedceramics at the studio I go... they haven't limit the amount of coats we put they just told us if the glaze is runny to glaze only 3/4 or 1/2 of the pot depending.

@oonaghgil5345 4 жыл бұрын

Thanks. How do you dip bowls or objects that are hard to hold upside down?

@JustinsMakery 4 жыл бұрын

It can be tricky. I usually dip it in two sections. Dip the bottom of the bowl, wait a bit, and then hold the glazed area and dip the rim.

@melodyadams 5 жыл бұрын

I would also pick the same favorites as you did. What glazes and combo of layering did you put on the bigger one?

@JustinsMakery 5 жыл бұрын

I lost my notes on the two other example pots, so I'm not sure what they were. Now I write these things down in a bound book, instead of a pile of loose Post-it's.

@meast1431 5 жыл бұрын

How do you get your dipping glaze to work with layers like this. I have read that when dipping to only use one layer.

@JustinsMakery 5 жыл бұрын

I don't do anything special to my glazes. I do a fair amount of layering without a problem. Occasionally, like the blue glaze in my dog bowl video, the second layer will flake up and crack. 9 out of 10 times, I have no issue with dipping one over another.

@holdencaulfield6380 5 жыл бұрын

What is the recipe for the white zircopax glaze? I think the recipes for the other glazes are in John Britt’s mid range book.

@JustinsMakery 5 жыл бұрын

The zircopax glaze is Gloss Base 2 from John Britt's book plus 10% Zircopax.

@victorianilsen763 4 жыл бұрын

What is the name of that aluminum spinning table or brand I can't find one thx ! Great video

@ThePrairieFairymb 4 жыл бұрын

It’s called a banding wheel.

@potterywheel2503 5 жыл бұрын

Is this electric, oxidation or a reduction firing?

@JustinsMakery 5 жыл бұрын

It is electric oxidation.

@lynnann96 5 жыл бұрын

Did you expect dark brownish from floating blue on #2?

@JustinsMakery 5 жыл бұрын

It didn't surprise me that the Floating Blue came out brown, although I would have expected a tiny bit more blue. The thicker it is applied, the bluer it gets.

@gajendrasingh9486 4 жыл бұрын

how to make glaze...what metirial use for glaze...plz

@JustinsMakery 4 жыл бұрын

Scroll thru my videos and you will find one about recipes and materials.

@MrCatfishkiller35 Жыл бұрын

This might be a dumb question but were those pots already fired once before you glaze them

@triciac1019 5 ай бұрын

They were.

@wanderingpots 5 жыл бұрын

Your floating blue stayed red on number 2 , am I right ? Is it only blue when it floats ?

@JustinsMakery 5 жыл бұрын

Yes. It only turns blue when it floats.

@wanderingpots 5 жыл бұрын

Justins Makery cool , thanks for video, I like it in red best number 2.

@Cate7451 4 жыл бұрын

Rubsy Stringer flaring blue needs to be applied thick to get the fab effect. Brown or red when thin

@kyliefaison4738 4 жыл бұрын

What settings do you put your kiln at?

@JustinsMakery 4 жыл бұрын

Cone 05 for bisque, and Cone 5 for glaze firing. Glaze firing rates are pretty standard with an additional soak right after peak temp.

@deborahfeninno1033 Жыл бұрын

hello can you eat us with these glazes? or can you drink inside ? thank you

@Justin-tb2qk 4 жыл бұрын

#2 is beautiful. Thanks for the awesome test. You fire cone 5 or 6?

@JustinsMakery 4 жыл бұрын

Cone 5. My glazes work great at Cone 6, but my clay body is B-Mix Cone 5 and tends to sag a little and bloat at higher temperatures.

@Justin-tb2qk 4 жыл бұрын

@@JustinsMakery in use the same Clay and look forward to trying these out.

@qamarwe4154 4 жыл бұрын

PLease allow possibLe transLation of the Arabic and thanked

@kynahjai 4 жыл бұрын

it's amazing how the floating blue looked vastly different if it was not combined with another glaze.... so much so that its brown not actually blue?! Do certain glazes just vanish like recessive genes or something?

@Cate7451 4 жыл бұрын

Floating blue is especially like that. Mostly it looks great by itself since it is a tricky glaze but beautiful one can stop there. It is brown where thinner. Only some glazes work well with it. So be careful when layering. It can look very ugly and you can waste pottery. Use test tiles rather than taking a chance with best pots.