Mini Oilchange How To On B38 Engine Models: F54 F55 F56 F60

Рет қаралды 61,309

6 жыл бұрын

In this How To Video I show you how to change the oil and oilfilter in an Mini Cooper's B38 engine. The Engine can be found in the models from 2014 and the engines are still used in the 2018 Version of the car. With these simple step by step instructions you can do the oil changes at home. All you need are some basic tools. Torque Specs included in the video. Give Me Like and Please subscribe if you like my content!
Parts Used:
Screw plug M12X16 11137535106
Gasket ring M12 07119963132
Set oil-filter element 11428570590
Screw plug oil filter housing 11428575906
4.3 Liters Egine Oil Castrol 5W30 C3
Always check your cars specific oil level!
Music Credits:
► Music Credit: LAKEY INSPIRED
Track Name: "New Day"
Music By: LAKEY INSPIRED @ / lakeyinspired
Original upload HERE - / . .
Official "LAKEY INSPIRED" KZfaq Channel HERE - kzfaq.info/love/Omy...
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Full License HERE - creativecommons.org/licenses/...
Music promoted by NCM goo.gl/fh3rEJ
--- ♪♫ FREE DOWNLOAD ♫♪ ---
► Download "New Day" for free HERE - / . .
--- ♪♫ Artists' Links ♫♪ ---
► Music by: LAKEY INSPIRED
• SUBSCRIBE to the LAKEY INSPIRED KZfaq channel HERE - kzfaq.info/love/Omy...
• Follow LAKEY INSPIRED on SoundCloud HERE - / lakeyinspired
• Follow LAKEY INSPIRED on Instagram HERE - / lakeyinspired
• Follow LAKEY INSPIRED on Spotify HERE - open.spotify.com/artist/3zDGj...
• Support LAKEY INSPIRED on Patreon HERE - (Optional) / lakeyinspired
►The Background Image Is From: unsplash.com.
• Unsplash commercial use license: unsplash.com/license

Пікірлер: 72

@13mrlonely 3 жыл бұрын

Most sensual oil change I've ever seen.

@Iolis 8 ай бұрын

I love video's like this that are direct, to the point, concise and totally devoid of waffle.

@WhelanDrums 6 жыл бұрын

I can always appreciate a video that sharing info to help others. Well put together!

@Juupke 6 жыл бұрын

Thank you, spread the word👍🏻

@martinscocan5221 4 жыл бұрын

Thanks Very Much for your video!!

@vhc7764 5 жыл бұрын

Thank you...also the additional tips below!

@stasskrip 5 жыл бұрын

Thank you!

@m5e28s38 6 жыл бұрын

Great video. One suggestion: clean oil filter cap and drain plugs with brake cleaner, before reinstalling it.

@Juupke 6 жыл бұрын

Alex Good additional tip! In this case both drainplugs where new. We cleaned the surrounds off camera with a rag and cleaner. Thanks for your comment!

@Jay-pk2bs 5 жыл бұрын

This video was very helpful & well but together.

@Juupke 5 жыл бұрын

Jay Razor thank you!

@whip-its_dad4239 5 жыл бұрын

I notice the first oil filter drain plug took a 13mm to remove and to install the new one uses a T55 torxbit to install .The new one comes with the filter.

@Juupke 5 жыл бұрын

Good stuff! Thanks for the info!

@teecee90 6 жыл бұрын

F56 B38M engine = 4.3 litre oil required. Not a full 5 litre bottle.

@Juupke 6 жыл бұрын

teecee90 Thanks! Always check your cars specific oil level before filling up, that is why it it not mentioned in the video. We allready emptied out 0.7 liters from the 5L container ;)

@pacoguillen635 4 жыл бұрын

Nice, simple explanation and very clearly information. Should do a video on how to use liquid seafoam on the vacuum line and spray seafoam avoiding the map sensors on the b38 👋👌

@Shanaigins 5 жыл бұрын

Plus one clean and dry oil filer housing, lube new o-ring after filling with oil run engine with service flaps open to check for leaks.

@Juupke 5 жыл бұрын

Great tips!

@maximilian7460 3 ай бұрын

For everyone who sees the video later, do not under any circumstances unscrew the drain plug on the oil filter as it will leak. Take a piece of cardboard from the packaging, put it behind the filter and unscrew it piece by piece.

@pauloneill8912 3 жыл бұрын

is this procedure the same for the 2020 f57 cooper convertible?

@RR-qn1ro 2 жыл бұрын

What size is the copper crush washer?

@lucho-nji8398 Жыл бұрын

Hello Juupke Is it the 2.0d or 1.6d engine. Thank you and nice video

@samidan22 5 жыл бұрын

Nice video bro. You help me a lot. Do you know where I can find the type of filter that use my mini f56? Regards from México

@Juupke 5 жыл бұрын

Daniel Osorio Hi, thanks! Yes, you can use sites like realoem or bmwfans (search with google) to search for the partnumber. You need the last 7 of your VIN number to get to the parts drawings, you can then use the original bmw / mini partnumber to order your parts on known carparts sites! Good luck and thanks again! Greetz

@evgenykremer5208 5 жыл бұрын

Thanks for the video! Is it really necessary to change the plug each time you do the oil job? I guess just the o-ring is okay?

@Juupke 5 жыл бұрын

Its not necessary but well, if you look at what a new plug costs, a couple of euros, its not worth breaking the plug. Overtime they could wear down and become brittle especialy the hollow ones. I broke one once, and its a pain to get the broken bold out, so never doing that again. My advise change it for that fraction of the cost. Good luck!

@evgenykremer5208 5 жыл бұрын

@@Juupke OK, understood. Thanks!

@aidyledgard4582 2 жыл бұрын

The torx drain plug on the oil filter cap states 5NM + 2NM. Why not just state 7NM?

@evgenykremer5208 5 жыл бұрын

Do you know how to change brake fluid on the 2016 Clubman? Is the procedure any different from most cars?

@Juupke 5 жыл бұрын

No its the same for most cars!

@ProGamerKid2000 4 жыл бұрын

Can you use a regular 32mm socket or does it have to be the one from mini mania? Since the housing is plastic

@Juupke 4 жыл бұрын

Pop we used a regular 32mm socket, use a good fitting one and you should be ok.

@aaronnicholas5477 5 жыл бұрын

Great video can you do one on changing the transmission fluid for a 2015 Mini Cooper?

@Juupke 5 жыл бұрын

+Aaron Nicholas hi, the specific car is not in need of that service yet. If its a manual gearbox, then its fairly easy: remove trim pieces, loosen the fill plug, remove the drain plug, let the oil drain out. The replace the drain plug with a new one, tighten to torque specs, remove the fill plug, fill up with oil until it leaks around the fill hole, replace fill plug, miunt trim pieces and youre done.

@JulianiLuckeey 5 жыл бұрын

What oil do i use for my mini one 2005 R50? Castrol LL, M or C3?

@Juupke 5 жыл бұрын

C3 is fine!

@nigelchung86 5 жыл бұрын

Hi guys I am new to mini. Can I check for Mini Cooper S 2014 model F56 how frequent do the engine oil needs to be replaced

@Juupke 5 жыл бұрын

I would advise to change yearly or every 10.000 to 15.000 kms.

@stasskrip 5 жыл бұрын

What about cabin filter replacement for F60:)? Any videos?)

@Juupke 5 жыл бұрын

Not yet ;)

@lawrencesykkmon2064 4 ай бұрын

5w-30? not 0w-20?

@jet_man 3 жыл бұрын

How often do you suggest to change oil? I have 2021 BMW with 1.5 B38 engine and thinking about approach to oil service.

@Juupke 3 жыл бұрын

First change I would do after 7500-10.000km consider that a break in oil change then every 20.000km or every jear, if you can do it yourself its very cheap and fun to do!

@kubek-w-kubek 3 жыл бұрын

I changed today personaly in this motor after 8000km - I think it was unnecessary because I saw absolutely clean oil filter, clean oil etc. In my opinion changing oil sooner than BMW says is waste of money.

@martinscocan5221 4 жыл бұрын

Is that the 1.5 3 cylinder turbo engine?? How much oil does it take? I live in Canada and my 2019 Mini takes 0W-20 Oil according to Mini.

@Juupke 4 жыл бұрын

I believe it it, it takes 4.3 litres of oil. Different oiltypes can apply in different regions of the world and multiple types can be used without a problem.

@beppebranchetti4286 3 жыл бұрын

4,2 L

@legospeedshop 5 жыл бұрын

How do you get rid of the service light/s?

@Juupke 5 жыл бұрын

Also added to video discription: Turn the ignition key to the ON position without starting the engine, Press and hold the TRIP knob in the instrument cluster until you see a Service Item on the display, Press the TRIP knob briefly to scroll the service minders that you want to reset, in this case the oil can. Press and hold the TRIP knob until RESET? appears on the display, Release the knob and then hold it again to confirm the reset. Good luck!

@nodrog321 2 жыл бұрын

how safe is it to put jackstands on the control arm?

@beppebranchetti4286 Жыл бұрын

It is not safe.

@evgenykremer5208 5 жыл бұрын

Another question, how do I reset service interval after oil and filters change? Is it possible to do it by myself?

@Juupke 5 жыл бұрын

Good question, try this: Press the start/stop button once (do not start the engine). Press and hold the Trip/Reset button for approximately 10 seconds until the first service job appears in the display. Scroll the service menu by repeatedly pressing the Trip/Reset button. For the desired service item, if a reset is possible “Reset possible” will be displayed. Start the reset by pressing the Trip/Reset button for 3 seconds. Confirm “Reset?” by pressing and holding the Trip/Reset button for 3 seconds. The status of the reset is indicated by a progress bar and “Reset in progress”. The reset is confirmed as “Reset successful”. Turn the ignition off and start the engine to verify the indicator has been reset. Again good luck!

@evgenykremer5208 5 жыл бұрын

@@Juupke I've just tried this to no avail. No matter how long I'm holding the button, the screen contents just doesn't change. Car is Clubman 2016. Service time was in February, can it be the reason?

@Juupke 5 жыл бұрын

You should be able to get into the service menu anyway. And yes, I believe you can only change the interval, once the interval has been expired. If it says february its not that off. We do regular oil changes ourselves, in between the dealer visits for our newer cars. The normal cycle for a dealer would be every 2 years, We add the extra oilchange so it will be fresh oil every year. The older cars we do yearly ourselves because dealer history is not that important.

@mxblue44 5 жыл бұрын

@@Juupke merci vous êtes un dieu vivant de la mécanique

@ritterschoki 5 жыл бұрын

with how many Nm we put on the oil drain plug ... Thank you

@Juupke 5 жыл бұрын

25nm for the metal drainplug and the filter housing and 7nm for the plastic drainplug on the oilfilter housing.

@ritterschoki 5 жыл бұрын

@@Juupke Thank you for the fast answer. Very good video!!!!

@AyaxRo 2 жыл бұрын

This video is missing a rundown of the tools needed.

@sparkyt6497 8 ай бұрын

Is this (b38) engine petrol

@Juupke 8 ай бұрын

Jep

@OOOOShockwaveOOOO Жыл бұрын

is this a diesel engine?

@christianbrossard9124 5 жыл бұрын

Why the video si not available?

@Juupke 5 жыл бұрын

Please try again, I can watch it. Greetz

@rq7027 4 жыл бұрын

0-20 oil r55 s

@bertito43 3 жыл бұрын

I thought the B38 required 0w20

@funck2000 3 жыл бұрын

My 2018 NL Countryman F60 is originally filled with 0W-30 (BMW Longlife-04).

@greglikewhoa2623 4 жыл бұрын

Anybody else cringe when he added oil without a funnel?

@3vatsa Жыл бұрын

Hello Juupke, I have subscribed to your channel and follow your videos on many DIYs. I have Mini Cooper 2017 (3 cylinder engine) and recently I changed the engine oil myself for the first time. I found this piece dangling and wanted to know if I am missing any part or somethign that I can ignore (although this makes the tinging sound when the engine idles at a specific frequency) Kindly help. Video reference: kzfaq.info/get/bejne/fJN3ZtilztGrfGw.html

@Juupke Жыл бұрын

At the top there is a bolt, tighten that and the bracket should stay in place! It looks like its for a heatshield/undertray

@3vatsa Жыл бұрын

@@Juupke will do that. Thank you. Hope it is the extension for splash shield and not from a missing A/C drain.