JVC HR-3330TR Vintage VCR (1979)

Рет қаралды 14,560

8 жыл бұрын

This is one of the first VHS machines available. It is the multi system version of the original 3300, meaning it has PAL and SECAM for playback and recording and NTSC 4.43 for playback. I replaced 5 belts today and the unit is going strong but as you can see, it has some strange tracking problems and unstable audio pitch.

Пікірлер: 36

@ansarmahmood8603 5 жыл бұрын

Old is Gold

@xara339 9 ай бұрын

Εχω το ιδιο και λειτουργει ακόμα μια χαρα!

@nowt1002 5 жыл бұрын

Does it play back it's own recordings reasonably well? If so then the problem is with the capstan speed. Probably the speed is a bit out so the angle that the heads move across the tape is slightly off meaning that every so often the leave their proper tracks which gives the periodic noise bars. Do you have an oscilloscope? Check for a 3.71hz trapezoid signal at tp11 and a 3.71hz negative going pulse at tp12 on the servo board. The trapezoid should be about 7v peak to peak.

@SwedishRetroTechNerd 3 жыл бұрын

Just want to ask a quick question I noticed that it has a selector for NTSC at 0:02 does this VCR play NTSC? If not what is the switch for then? I have never seen such a early VCR being able to play both standards. The majority of NTSC compatible VCRs I have seen have all been 90s, Early 00s VCRs

@crashbandicoot4everr 3 жыл бұрын

Yes it does indeed play NTSC tapes by moving that switch. This was JVC's first multi system VHS machine.

@user-yv1sg9hn1l 4 жыл бұрын

Nice tape

@mikekal.6622 4 жыл бұрын

Γεια σας! Πολύ ωραίο βίντεο! Μια ερώτηση: Ψάχνω και εγώ να βρω ένα τέτοιου τύπου βίντεο late 70s’-early 80s’, αυτά με το «καπάκι». (top-loading vcr).Που θα μπορούσα να βρω ένα τέτοιο; Ευχαριστώ!

@crashbandicoot4everr 4 жыл бұрын

Στο Facebook marketplace έχει ένα AKAI VS-9700 του 1979-80 με πλήκτρα "πιάνο" οπως το JVC. :)

@paulg1367 8 жыл бұрын

γεια σας. What system were record license videocassetes in Greece before 1992? (In 1992 Greece migrated SECAM-B/G to PAL-B/G) PAL or SECAM?

@crashbandicoot4everr 8 жыл бұрын

+Paul-G Pavel Before 1992, TV broadcasts were in SECAM but when you rented or bought VHS, Beta or V2000 tapes from a video club/store, these were in PAL. The tape you are seeing in the video is an early 90s recording in SECAM (ERT 2 channel)

@MrTransalpin 8 жыл бұрын

+Fivos Sakellis This device maid record in MESECAM mode, or SECAM(France) mode. However, analog tuner is only B/G CCIR. I have receveid, 25 years ago, ERT1 with Eutelsat satellite( 7° East position) In SECAM and PAL( analog broacast) SECAM chroma was transcoded in PAL, with " green Bottle" residual in VBI. I am French. The SECAM Chroma was well restitued on my vintage PHILIPS 1974 manufactured in France, but it has not SCART plug. I has the 3330 TR. This deck maid playing NTSC VHS tape, import than i bought in Geneva, but only with 4,43 Mhz RCA Subcarrier, in 525 lines 60 Hz. This deck mays NTSC Playback only. However, when i allowed record with scotch on hole anti-erase, i maid " audio dub " fonction on the deck, and he was erasing only audio linear track, on the NTSC tapes, but video and HIFI audio were not modified. In Audio dub, the deck playback NTSC VHS HIFI tape( HIFI is not played by the JVC), and normal audio track only is erased.

@chrisamadeus4647 4 жыл бұрын

Does anyone know where to get replacement belts for this? Thanks

@chrisamadeus4647 4 жыл бұрын

@The Unknown Found a few suppliers but all out of stock, I think it may also need new heads.

@mbvideoselection 5 жыл бұрын

Looks like the audio/tracking head is badly aligned.

@dec484 8 жыл бұрын

You do not want to think about? I need some spare parts I have one like that! Yours too has many missing pieces, if you think back let me know thank you very much! Can you please send me the photos of the side? I will see if it is the same as mine!

@MrTransalpin 8 жыл бұрын

The control track is not well playing back.

@atoz0x0 8 жыл бұрын

hurui,bideoda

@babisnikolatos1457 3 жыл бұрын

Καλησπέρα σας, εξαιρετικά μηχανήματα όλα αυτά που έχετε, γνωρίζετε που υπάρχει κάποιο service για ένα hr3300 που έχω? Ευχαριστώ!!!

@crashbandicoot4everr 3 жыл бұрын

Καλησπέρα. Πολύ λίγοι τεχνικοί πλέον ασχολούνται με τέτοια παλιά μηχανήματα. Εγώ έμαθα μόνος μου να σκαλίζω μέσα από βιντεακια από διάφορους τεχνικούς και από τα service manual. Αν χρειάζεται ιμάντες θα βρεις στο mikra.gr. Το δικό μου το έχω ακόμα και λειτουργεί πλήρως.

@babisnikolatos1457 3 жыл бұрын

@@crashbandicoot4everr ευχαριστώ πολύ για την βοήθεια, νομίζω όμως ότι έχω μεγαλύτερο πρόβλημα από τους ιμάντες δυστυχώς, θα το ψάξω, ευχαριστώ πολύ κι πάλι

@crashbandicoot4everr 3 жыл бұрын

@@babisnikolatos1457 Συχνές βλάβες σε παλιά βίντεο βγάζουν τα κυκλώματα servo για τα μοτέρ. Συνήθως πυκνωτές αφήνουν πνεύμα μετά από τόσα χρόνια και μετά το βίντεο δεν μπορεί να παίξει σωστά. Η χειρότερη περίπτωση είναι πεσμένες κεφαλές.

@babisnikolatos1457 3 жыл бұрын

@@crashbandicoot4everr έχω την εντύπωση ότι είναι μηχανικό το πρόβλημα, ηλεκτρικά φαίνεται να είναι οκ, κι εγώ εκεί εντοπίζω πρόβλημα στο servo γιατί δεν σηκώνει την ταινία να την πάει στην κεφαλή

@crashbandicoot4everr 3 жыл бұрын

@@babisnikolatos1457 Το φόρτωμα της ταινίας δεν ελέγχεται από το servo αλλά από κάποιους μικροδιακοπτες. Fast forward και rewind κάνει κανονικά;