How To Handle FT8 Pileups

Рет қаралды 4,203

11 ай бұрын

What's The Best Way To Handle FT8 Pileups? What's That 2nd Tab In WSJT-X For Anyway? Can You Change The Coax On A Diamond K-400 Mount?
Consider becoming a Patron @ / k8mrdradiostuff
Follow me on Twitter. / k8mrd
Links to many of the things I use can be found here:
www.amazon.com/shop/k8mrdradi...
As an Amazon Associate I earn from qualifying purchases.
Big Geek Battery Box, k8mrd.square.site
Watch the video here: • Big Geek 12V Ham Radio...
Tri-Lam BuddiStick Pro Counterpoise Support: k8mrd.square.site
K8MRD Radio Stuff Shirts:
Happy Skull Guy: grapevineamateurradio.com/col...
Tower of Terror: grapevineamateurradio.com/col...
Parks On The Air Merch (non affiliate) www.clubgearonline.com
Links to other stuff (affiliate where possible)
**Save 10% off your Coax order at ABR Industries. Use code K8MRD10 at checkout.
abrind.com/?sld=2
The SkyHook Portable Mast Antenna Mount (non affiliate)
www.thehamstop.com/
Use code K8MRDRADIO for 20% off
Save 5% Off At Gigaparts With Code K8MRD:
www.gigaparts.com/nsearch/?lp...
5% off Messi & Paoloni Coax
Use code K8MRD for 5% off.
messi.it. (or you can order from Gigaparts)
Signal Stuff Signal Stick Antennas:
BNC Antenna: signalstuff.com/super-elastic...
SMA Female Antenna: signalstuff.com/super-elastic...
SMA Male Antenna: signalstuff.com/super-elastic...
Signalstuff Antennas: signalstuff.com/?ref=4089
~~~$15 off most purchases over $65 at Radioddity:
radioddity.refr.cc/mikedahlhofer
#hamradio #k8mrd #mailbagmonday

Пікірлер: 35

@kd3mad877 11 ай бұрын

Outstanding response on calling CQ and handling the pile up. Appreciate you taking on the question. 😄

@kb9jqu 11 ай бұрын

Mike I like your operating procedure for calling CQ in WSJT-X. Good rationale behind it and less stressful than keeping track of who called you.

@truckinguy92 11 ай бұрын

SSB is sooo much simpler. It’s great you know your way around FT8 like you do to help others.

@BMCTackle 11 ай бұрын

Awesome great info & humor as always! Thank you for your assistance in choosing Messi & Paoloni coax & accessories. THAT IS SOME EXCELLENT QUALITY! Never seen such attention to detail and 100% satisfaction with Stefano & staff. I am very pleased with the coax and all the info I learn with all your shows. Louis WW7GBA

@kj7iaz 11 ай бұрын

Haha ryan emailed me those same pics. I failed to notice that. Oops. Ryan, if you see this I am sorry. Haha. Great video Mike, these mailbag Monday videos are always entertaining.

@N0RMJ 11 ай бұрын

All good. I caught the missing connection right after I sent the pics out. So that will be addressed. Not a lot of room to work with once the body of the vehicle is in place.

@gregmihran8616 11 ай бұрын

For me, GridTracker software operating with WSJT-X is a must-have! Not only does it provide stunning graphics for QSO traffic (to alleviate FTx boredom), it automatically logs my WSJT-X QSOs into QRZ, LoTW, HRDLog, eQSL and ClubLog in real-time. And I use its intelligent QSOs queue (rather than WSJT-X) to track incoming POTA stations and DX countries I need by band. ... and keep up the Marvel thing at the end 😁 73 KJ6ER

@montantico 11 ай бұрын

Here ya go sir. Have this like I had on my tool bag :)

@philliphumphrey5621 11 ай бұрын

When I don't get a 73 back, I firstly check if there is another stronger station on the same freq cutting them out. I use gridtacker to sort calls by freq to determine this. If so I call again. If the caller has moved to a different caller I check if the band dropped out on his last 15 sec cycle in which case he probably confirmed but I missed it. I then check eqsl or clublog and find alot of the time they logged my call. In that case I open up the wsjtx log file in notepad ++ and use find all against his callsign and check detailed. I then manually log post qso. Works very well for dxpeditions who often won't call you again.. 73 de m0eas

@HAMFunko4pdi 11 ай бұрын

Good one Mike. Thanks. NOw to work FT4 on a Satellite, that's my next challange.

@hamradiotube 11 ай бұрын

FT4 is exactly like FT8, just quicker. It doesn't decode quite as deep either but that's about it. Satellites on the other hand are a bit more of a challenge.

@mxmike5 11 ай бұрын

The most efficient way to do it!

@mxmike5 11 ай бұрын

FT8 Pro Tip: Look like a real pro to those that know! If CQ'ing and you get multiple callers, grab the pro that is answering and gives you your report first (He is calling you with TX2 not default TX1)! He knows how to eliminate the wasted time of 1 sequence. By the same token, if you are answering a CQ, call by using TX2 for your first call instead of the default TX1. Saves time, more contacts, snappy QSO's!

@jackK5FIT 11 ай бұрын

Ham radio operators never read manuals. We know everything from conception. 😁 Good tips on WSJT-X thanks. Jack K5FIT

@kevinmatthews2620 11 ай бұрын

mshv has the automated qso available in it, also going on working pileups EASIER, have your time sync program set to recheck every 15 mins,if difference greater than 2 seconds reset clock, the 15 mins cuts in from when your pc is turned on, even now there is still ops with bad time sync, if your time sync is 0.0 you will work/decode more dx as the lowest DT is always displayed first to the partner station :)

@kevinmatthews2620 11 ай бұрын

mike ,your using a out of date version of wsjtx your on 2.6.0 , current version is 2.6.2 which i am using and there is 3 tabs not 2 thats in yours :), and as for pileup handling stretch the screen upwards on your laptop and have either smaller waterfall or a secondary small screen powered from your laptops hdmi socket,b btw i run numerous JA pileups when being a SES op 1 hr 15 mins of JA stns logged 150 ish :), and yes i have 50k worth of digital contacts

@av3510 11 ай бұрын

Sir Mike!

@KeepEvery1Guessing 11 ай бұрын

We need a rain cap for an SO-239 that looks like a Humvee tire.

@N0RMJ 11 ай бұрын

I have plans to use a standard so239 rain/dust cap and attach a PVC cap on top of it. Then a piece of black shrink tubing over the top should give the look of a tire cover. Other improvements include a counterpoise connection through the gas cap. Others have suggested a small winch for the antenna instead of via the roof mount.

@KeepEvery1Guessing 11 ай бұрын

@@N0RMJ Your rain/dust cap idea sounds good. A reasonable looking winch, however, would be hard pressed to store enough wire, and would probably be bending it too tightly to good longevity. Maybe dressed as a coil of serious rope stored on the roof? But whatever floats your boat. It's a neat project.

@N0RMJ 11 ай бұрын

@@KeepEvery1Guessing I'm not sold on the winch idea either, but thanks for the feedback.

@FatherMarty 11 ай бұрын

For some operators, some say that the RR73 means that the follow-up 73 from the other side of the contact isn't expected. So, as in POTA, it would be similar to answering a CQ with "K0XXX you are 59 TX K-9999, him responding "Roger, you are 59 IA enjoy!" and you saying (combined) "73 QRZ?" The FT-8 community could really benefit from some standardization around when a contact is complete - especially when 73 may not be sent. OK - a question now. I use JT-alert and am set up to log to DXLog and send to LoTW and eQSL. QRZ feeds from both sources. If I answer a CQ, but the other station doesn't hear me, and I go through the cycle and finally abandon the conversation, is there a way to clear the data elements in the logging chain? What ends up happening is the "start QSO" time doesn't change, and I end up with my next successful QSO being logged as a start time of the abandoned QSO and the end time of the current QSO, which may be 1 to 14 hours apart!

@norrinradd8952 11 ай бұрын

I find that most operators follow the standard FT8 exchange, either intentionally or possibly just because they are allowing Auto Sequencing to do its thing. Just my experience, but I would say 99% follow the standard exchange. Every once in a while I get someone that instantly responds to my CQ with a signal report instead of a grid square. They get their signal report from me and then they split. I tend to not respond to those folks. If I do happen to respond but I don't get the grid square and acknowledgement, I don't log it. I'm not going to confirm a contact of someone that was too lazy to finish the QSO.

@DellFargus 11 ай бұрын

If you're not the #1 guy answering in the pileup, the software will (usually) turn of your transmit when it sees the caller respond to someone else. So, the pileup will (usually) sort itself out. Totally unrelated... What software do you use to log? Both for FT8 and SSB. How do you get it into LoTW? Would ya mind giving us a demo? I see all these videos for radios, antennas, POTA, SOTA, etc., but noone ever gets really into logging.

@hamradiotube 11 ай бұрын

Yes that should true if you're the one coming back to the station calling CQ and he's (or maybe she??) picked up another station first. As for logging, I'm on a Mac and I use RUMlogNG. kzfaq.info/get/bejne/mdxoabBytbnanaM.html For FT8, I don't do any automated uploads to my logging software. I export the .adif file manually, import it into a new log to check for dupes, delete the dupes, export that clean .adif file to my desktop and import it to my logging software. Then I use RUMlogNG to upload it to LOTW. It sounds like a lot of steps but it actually takes maybe a minute...Pretty sure I show it in the video.

@DellFargus 11 ай бұрын

@@hamradiotube Thanks. I must have missed that video.

@CC-hk6vy 11 ай бұрын

WHAT! It's only ham radio! Isn't DX life or death take it personal and high noon at the OK corralled? 😅😅😅 de WO8USA🇺🇸🇺🇸🇺🇸

@lonewolfhamradio 11 ай бұрын

I say old chap congratulations on the correct pronouncing of “soldering” 😂

@hamradiotube 11 ай бұрын

I solemnly swear to never pronounce the L again.

@denelson83 11 ай бұрын

Get it? "Matchbox"? And "RR73" is actually confusable with a valid grid square, albeit one that is up in the Arctic Ocean. So I would suggest using "TU73" instead of "RR73" in FT8 contacts, as "T" and "U" are never found in the first pair of letters in a grid square. 73 VE7NDE

@hamradiotube 11 ай бұрын

That's not quite how that works. Your grid square isn't exchanged in that part of the qso.