You're very welcome Gene!! Enjoy!!!!

also the assistant modes 1-5 represent performance settings for each "gear mode" 1-5

Hello, It unfortunately would not be compatible.

@@epiccycles9 ok.. thanks for your reply .. Much appreciated…

Bought the same 2 machines 🤘

@@mrcasanova19701 cool 👌

Hello, This is a model that we do not carry. We have not serviced any either. Kaabo scooters are the best in the industry and require standard tune ups. Bolts coming loose or electronics breaking down are unlikely, but it all depends on how you treat your scooter. Electronics do have a manufacturers warranty.

Hello. The 2 front deck spot lights will flash when you brake.

In an electric motor, a speed magnet is a device used to control the speed of the motor. It is typically used in brushless DC motors, which are commonly found in electric bicycles and e-scooters. The speed magnet is a small magnet that is positioned near the motor's rotor. It creates a magnetic field that interacts with the stator's magnetic field, which generates the rotation of the rotor. When the speed magnet is adjusted in the motor setting, it can change the strength of the magnetic field, which in turn affects the speed of the rotor. Increasing the strength of the magnetic field will increase the speed of the rotor, and decreasing the strength will decrease the speed. This allows for precise control over the speed of the electric motor, which can be used to optimize performance and efficiency. It's important to note that the adjustment of the speed magnet should be done by a qualified technician, as improper adjustment can cause damage to the motor or affect the performance of the electric scooter. Also, the speed magnet is not a feature that all electric scooters have, and it's always recommended to check the specifications of the scooter before buying it.

@@epiccycles9 So I've read about people reducing the output of the front motor a little (likely to improve stability under acceleration coming out of a corner). I'm assuming they are using the speed magnet setting to do it, or is that done somewhere else? Also, how do you know how far up or down is safe to go w/o fear for damaging something? Thanks for the great info!

Hello, which model scooter do you have?

Hello. If it currently has a stock mini motors display, then no it is not compatible.

Hello. You can find more info on the P settings here - cdncloudcart.com/12860/files/doc/gt-manual.pdf?1653229171

Here is a link to the Kaabo user manuals : kaabostore.eu/page/user-manual-kaabokaabostore.eu/page/user-manual-kaabo

No not on this display, it's more straight forward. P setting can only be found on the previous display models used by Kaabo's LT01 and Minimotor EY3 displays

Hello, no you can not. They will not work together

Hi as a default there is no password set, if you want to set one you can choose any 4 digit code

If cruise control is set to automatic mode ( Picture1.png ACC under cruise control symbol) simply maintain the desired speed for 5 seconds and it will engage. If set to manual mode ( Picture2.png Cruise control symbol only ) hold down the ( - ) button to lock in the desired speed.

@@epiccycles9 tnx

The Wolf King GT comes with two chargers included so you can charge this massive battery in around 7 hours.

That's normal for when ABS is on. The sound is the ABS doing its job. Most people find it annoying so they just turn off the ABS.

@@epiccycles9 I read somewhere that I was supposed to bleed the brakes? Too late to do it or leave it alone now?

Here is a link to the product manual : cdncloudcart.com/12860/files/doc/gt-manual.pdf?1653229171

GTR is slightly better. A little more powerful, larger tires and a removable battery is nice sometimes. However the GT is still a sweet ride with almost all the bells and whistles and a thousand dollars cheaper then the GTR for a very similar ride

You need to go in the settings and change the speed limit. It's set to 25km per hour from the factory. To do this turn on the display and then hold them M button within 5 seconds of turning it on. If you wait to long while the display is on it will only enter trip reset mode. So again turn off and then turn you display back on and as soon as it turns on hold the M button. Once you are in the settings it will prompt you to enter a password. The password is 1500. Once you are in go down to advanced settings and it will ask you for the password again which is the same password - 1500. The second option in the speed setting is the speed limitation. Likely yours is currently set to 25, so you will need to increase it to 100 or less if you don't want it that fast. Good luck, and let us know if you have any other questions.

No , there is no way to actually reset the odo. The only way to do it would be to purchase a brand new display ; )

I’d love to know what he did