Kalamazoo 1x42 for knife sharpening

No video

Kalamazoo 1x42 for knife sharpening - REVIEW

Рет қаралды 1,695

Honed By Jones

Күн бұрын

Пікірлер: 32

@CruisingNorthwest Ай бұрын

I have owned one of these for a decade. It is a superb machine, completely trouble free despite heavy use and made in the US.

@HonedByJones Ай бұрын

Great to hear. Glad it’s worked well for you.

@robertmunguia250 2 ай бұрын

Wow! Never thought that angle guide would fit in there! Nice!

@HonedByJones Ай бұрын

Me neither

@chaddebeer5561 2 ай бұрын

Thanks for the video, I think it's great that the community helps each other out.

@j.d.1488 Ай бұрын

You popped up on my feed. Nice review. Retired guy and been watching Cliff Curry. I as many others who wanted to get into sharpening to sharpen tools, kitchen knives or just general sharpening have purchased the Rikon 50-161VS. After seeing this video I have to say all your points are spot on. Thank You for an excellent post. Good luck and prosper with your new found business.. This machine is a cool piece of equipment for any small shop. Thank You

@HonedByJones Ай бұрын

Thanks for the comment and glad you enjoyed the review.

@damonlathe Ай бұрын

Thank you for so much info. Trying to learn this.

@SharpeningSupplies 2 ай бұрын

Great review, and nice sharpening setup. Looking forward to that longevity review!

@HonedByJones 2 ай бұрын

Me too!

@jerrywiese9722 2 ай бұрын

Hi Warren. I enjoy your enthusiasm for your new line of work. Your video shows you enjoy what you do now as well as using your past experience in massage to help you now. You've chosen some good sources for information. I look forward to seeing how you progress in your new business

@HonedByJones 2 ай бұрын

Thanks!

@steven_sharpens 2 ай бұрын

Thanks for the shoutout! You'll be doing great work on these machines!

@HonedByJones 2 ай бұрын

Thanks for the inspiration!

@dansworld9635 2 ай бұрын

Thanks for the video. Thumbs up!👍

@robertmunguia250 2 ай бұрын

I wonder if you could put a 2 in drive wheel on it to run 2 by 42 belts?

@HonedByJones 2 ай бұрын

Don’t know. I’d probably just get a 2x42.

@dansworld9635 Ай бұрын

What exactly did you have to do to mount the angle guide on the knife makers platen? Thanks.

@HonedByJones Ай бұрын

I’ll try to make a video showing what I did. In simplistic terms the platen was too wide so I used an angle grinder to narrow it enough so the angle guide could slide on.

@dansworld9635 Ай бұрын

@HonedByJones Thanks Warren, you're awesome.

@llamawizard Ай бұрын

What’s the income like? I’ve loved sharpening and the feeling of using a sharp knife since I was a child. I have a great career but am considering sharpening as a side hustle

@HonedByJones Ай бұрын

Hard question to answer. Some people are sharpening 5 hours a week and some people are sharpening 40 hours a week so I’m not sure what the average would be.

@Optimization_Coach Ай бұрын

Thanks for this. What's your preferred source for good quality belts? Looks like the 1x42 is out of stock at Kalamazoo sadly

@HonedByJones Ай бұрын

Curry custom cutlery or red label abrasives have been working well for me

@maxavol 2 ай бұрын

So could you sharpen edge trailing with this machine?

@HonedByJones 2 ай бұрын

Steven sharpens said in his video that he ordered the machine edge trailing straight from the company.

@headoak3791 18 күн бұрын

Did you have to customize your angle guide for your Kalamazoo? If so can you do a video on how! I just purchased one, and I have a curry angle guide but it will not fit. I asked that question before you got the part of customizing the platen. Can you do a video on that? Or is there one out there one out there?

@HonedByJones 18 күн бұрын

I had to customize the platen. I unfortunately didn’t make a video. 1. Measured the width I needed the platen to be to fit the angle guide. 2. Used a marker and a ruler to draw out how I needed the platen to be modified. 3. Pulled out my angle grinder with a cutoff wheel on it and cut the platen down to size. 4. Slid angle guide onto the newly modified platen.

@bwillan 27 күн бұрын

For the volume of items you plan to sharpen with your belt grinder, what do you expect your cost of belts to amount? For your Tormek, are you using the original aluminum oxide stone?

@HonedByJones 24 күн бұрын

I’m actually selling the Tormek and the 2 CBN stones. I find that the Edge Pro BevelTech and Apex do most of the same stuff that the Tormek does and I like using them more.

@HonedByJones 24 күн бұрын

I’ve been using ceramic belts and trizac belts and they both last a long time and the cost is pretty low.

@wms7745 2 ай бұрын

Thanks for all your information. I'm in the starting phase and I have a 1x30 and a ken onion. I have gotten somethings from Curry Custom I'd like to chat with you. I'll message you. Good luck