Upgrades and mods Part 1 | SG1605 | Successor to SG1603 SG1604 UDIRC UD1603 1607

No video

Upgrades and mods Part 1 | SG1605 | Successor to SG1603 SG1604 UDIRC UD1603 1607

Рет қаралды 6,205

Mr Yanson | MR Y

Күн бұрын

Пікірлер: 35

@danieltrilopez 2 жыл бұрын

Thank you! Nice little car

@MrYansonMRY 2 жыл бұрын

You're most welcome! Indeed, it's a very fun car to work on. Has a Traxxas Slash but I still prefer to play with this little car

@apineda716 5 ай бұрын

Bigger brushed motor is way better for drifting!! Cool video!!! I always love brushless too! But as far as drifting controlably for this car in particularly this car..i think an upgraged brushed motor is the way to go an a better batter! Then u can drift controlably at the second setting with good speed, and also have fun at high speeds if u turn the remotel up to 3!

@MrYansonMRY 5 ай бұрын

You are right. I prefer using bigger motor as it has more torque at low speed compared to smaller motor. The rest, one just needs more practices to perfect the drifting lines.

@thatsmyrc Жыл бұрын

awesome video I am going to build one myself for fun

@MrYansonMRY Жыл бұрын

Thank you 😊 indeed a fun little rc car to upgrade and play

@christiangolf2 Жыл бұрын

Dear Sir, Thanks for the nice video. I have the same question as another viewer. I bought the sg1605, which I will receive in the coming days. It's also regarding the spur gear in plastic. We can purchase a metal gear for the engine, metal differentials. So as a result we have everything in metal, but still a plastic gear in-between, which makes no sense to me. And what about the drive shaft (I can't find anything about it)? Is it plastic or metal and can we buy it as spare-parts? Do you have perhaps an email address from the factory, where I can get some information? Many thanks and best regards.

@MrYansonMRY Жыл бұрын

As far as I know, all parts are upgradable to metal except the spur gear. Don't worry, I'm still using the stock spur gear with brushless setup. (I have 5 plastic spur gears as my spare, just in case) I'm sorry I don't have any contact with the factory.

@alvinceh 7 ай бұрын

Can you inform the pinion and spur size? Default pinion cant fit into brushless motor

@MrYansonMRY 7 ай бұрын

I'm not sure the size but you can use a brushless motor with 2.3mm shaft diameter to fit the stock pinion and spur.

@jesseblamey6494 Жыл бұрын

just got mine a few weeks ago. did you do the brushless setup? Where can I buy upgrades for this car ?

@MrYansonMRY Жыл бұрын

Congratulations. It's a blast to build and play. Yes, I upgraded to brushless setup by buying parts separately. You'd need 2.3mm shaft brushless motor, brushless ESC and 3 wired servo. For simpler way, you might consider the ready package from them. All are included. I bought them on Shopee.

@davidseychell Жыл бұрын

Nice car but pinion gear is plastik no agbrade to metal enowing

@MrYansonMRY Жыл бұрын

Spur gear is indeed still plastic but it's very durable despite the brushless power. Plus, plastic spur gear is quieter than metal

@davidseychell Жыл бұрын

@@MrYansonMRY thx for yore opinion

@davidseychell Жыл бұрын

But there out side are e metal spur???for this car?

@MrYansonMRY Жыл бұрын

There's no metal spur gear yet. However I saw a video of pupil's mod using Mod1 gear

@richad1100 2 жыл бұрын

Does the brushed model still have the same 5 wire servo? Thanks!

@MrYansonMRY 2 жыл бұрын

Yes, it does have 5 wire servo

@richad1100 2 жыл бұрын

@@MrYansonMRY thank you!

@MrYansonMRY 2 жыл бұрын

You're most welcome

@villalba3420 Жыл бұрын

your servo emits some strange sound even if you do not move the direction?

@MrYansonMRY Жыл бұрын

So far no audible sounds from my servo so far even if it's not moving.

@SultanTuner1 Жыл бұрын

Try to adjust the steering trim knob and the steering d/r knob, just in case, if does not work try to turn the car off, unplug the battery and try again

@MrYansonMRY Жыл бұрын

Noted! 👍🏼 Thanks for the tips 🙂

@SultanTuner1 Жыл бұрын

@@MrYansonMRY I hope it helps 🤘🏿🤘🏿