No video
UDIRC panther pro, cheap alloy upgrades Hubs and arms.
Рет қаралды 6,026
Күн бұрынWelcome back to Wtf Rc Cars,
UDIRC panther pro, cheap alloy upgrades Hubs and arms.
24.74￡ 43% OFF|Metal Upgrade Parts Kit Swing Arm for SG 1603 SG 1604 SG1603 SG1604 UDIRC UD1601 UD1602 1/16 RC... www.aliexpress...
For RCModelz link use discount code rcmz for 5% off most of the link prices.
Servos
THETA RAZOR T1 NFC £105.63
www.banggood.c...
Ludicrous L8849 brushless servo £85
www.passionrc....
Power HD TR-4 Mini 7.4V 2.6KG Waterproof Metal Gear Servo for TRX4 £18.19
www.banggood.c...
AGF A80BHMW 40KG Waterproof Metal Gear Brushless Digital Servo £69.77
www.banggood.c...
Flysky Radios and receivers
FlySky FS-G7P 2.4GHz 7CH ANT Protocol Radio Transmitter PWM/PPM/i-BUS/S.BUS Output with FS-R7P £56.37
www.banggood.c...
FlySky FS-FRA01 2.4GHz Fishbone Antenna 8dBi £20.83
www.banggood.c...
UK FlySky FRA01 Fishbone Antenna 2.4g 8dbi Directional Antenna £19.99
www.rcmodelz.c...
Flysky NB4 2.4G 4CH Noble Radio Transmitter w/ HVGA 3.5" TFT Color Screen £146.77
www.banggood.c...
UK Flysky NOBLE NB4 2.4ghz Transmitter & Receivers £179.99
www.rcmodelz.c...
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.c...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.c...
FRM302 range extender £81.80
www.banggood.c...
Flysky FGR4 receiver £29.09
www.banggood.c...
Flysky GMR micro receiver £27.93
www.banggood.c...
Flysky FGR4P £29.26
www.amazon.co....
Flysky FGR4B receiver £26.54
www.banggood.c...
UK FlySky FGr4B 2.4GHz 4CH AFHDS 3 Micro Mini RC Receiver £32.49
www.rcmodelz.c...
FlySky FGr8B £38.04
www.banggood.c...
UK FlySky FGr8B £34.49
www.rcmodelz.c...
FlySky FGr12B £40.33
www.banggood.c...
UK FlySky FGr12B £38.99
www.rcmodelz.c...
Flysky FS-RM005 NB4/Noble Pro FHSS 2.4G Module Compatible Kyosho MINI-Z £38.45
www.banggood.c...
UK Kyosho/FlySky NB4 FS-RM005 Module £36.99
www.rcmodelz.c...
ESC and Motors,
Hobbywing EzRun MAX10-SCT 120A Waterproof Brushless ESC +3660 SL G2 Motor for 1/10 Rc Car Truck - 4000KV £135.47
www.banggood.c...
TT2302 - Tekin Racing RX8 Gen3 - sensored or sensorless 1/8th or SC ESC - No limit £190.00
www.rccarshop....
RC cars
Wltoys 144001 1/14 2.4G 4WD High Speed Racing RC Car Vehicle + 3 batteries £84.64
www.banggood.c...
Gyros
AGFRC GY01 Aluminium Case High Stability Drift Tuned Gyro £31.05
www.banggood.c...
@scichacki Жыл бұрын
Thank you SO much for uploading this. I was struggling trying to figure out the best way to put mine back together, and this was the PERFECT tutorial.
@WTFRCCars Жыл бұрын
Glad ya liked it :)
@LeftyRC 11 ай бұрын
Appreciate your video thank you
@WTFRCCars 11 ай бұрын
Glad ya like it :)
@js32257 Жыл бұрын
I think the problem with the arms binding is caused by the screw (pin) that goes through the diff housing for the arm to pivot around. I made my stock arms "floppy" by using a 2mm (same size as the hole) drill bit and turning it manually lots of times. You don't want to "drill" the hole but ream it ever so slightly so the pin can easily spin but isn't sloppy.
@WTFRCCars Жыл бұрын
Yeh would definitely help :)
@js32257 Жыл бұрын
@@WTFRCCars Are the metal arms/steering knuckle "tighter" than the stock ones? The reason I'd consider an upgrade is to reduce the slop and jiggle in the steering components.
@WTFRCCars Жыл бұрын
Yeh they do seem to remove some of the slop in the stock parts
@Iphone-gp9oo Жыл бұрын
@@js32257 o
@js32257 Жыл бұрын
@@Iphone-gp9oo ...what?
@gregdurbala5970 8 күн бұрын
Sorry to dredge up an old video BUT the front hubs. You put the bearings in AFTER the screws? When I out the bearings in and then try to put in the hub screws, they will not go in and get tight. Put teh screws in forst and then add the bearings will give a much tighter assembly? mine is very loose.
@WTFRCCars 8 күн бұрын
Didn't get lose on mine but there have been a good few changes on these udi rc's over the years :)
@ryanfryzi9827 Жыл бұрын
Turn the drift assistant off and it's a great car.
@WTFRCCars Жыл бұрын
Yeh never really liked the cheap gyros
@dalelusted3947 Жыл бұрын
I got the alloy parts but they didn't send the brass inserts for the wishbones so the steering locks up tight. Can they be sourced separate? Thanks. Great video.
@WTFRCCars Жыл бұрын
Not sure but I would think if you message them they can find some for you or just search on AliExpress for them :)
@Hotmale420 Жыл бұрын
no test drive?
@WTFRCCars Жыл бұрын
Just ain't had time got so many other projects on the go and work 12h shifts too. But this has remined me I have the other alloy body mount to fit too lol
@brayanfernandez885 Жыл бұрын
is there an adjustable suspension option I'm looking on how to adjust camber toeing and acronym
@WTFRCCars Жыл бұрын
I haven't found any yet unfortunately
@davidseychell Жыл бұрын
Hi helpme pls put link to metal spur pls
@WTFRCCars Жыл бұрын
This looks like the right one Just found this amazing item on AliExpress. Check it out! ￡2.47 | 2Pcs/set Decelerate Steel Gear+Motor Gear Wltoys 144001 124016 124017 124018 124019 RC Car Parts a.aliexpress.com/_mOpwL1q
@dcollector8172 Жыл бұрын
Is it worth the metal upgrade? In performance wise.
@WTFRCCars Жыл бұрын
Gets the cog lower and the RC is so light as stock so yeh it drives better :)
@leisuresuitluke 8 ай бұрын
hey bro, do these arms fit the udi1608? I think they're all the same chassis, but can anyone confirm?
@WTFRCCars 8 ай бұрын
Not sure if there the same part I only have this one
@ruddyminorheart 2 жыл бұрын
Halo sobat..!? Boleh tanya apakah part itu bisa di aplikasikan ke unit Udirc 1604??
@WTFRCCars 2 жыл бұрын
saya akan berpikir begitu itu terlihat sama :)
@teozianghan9224 Жыл бұрын
May I know what is the battery used?
@WTFRCCars Жыл бұрын
Just the stock one it came with
@foxhoundra6444 Жыл бұрын
I just installed the metal front arms and I stripped the hole on one of the cups :( It looks like there are two types
@WTFRCCars Жыл бұрын
Interesting I didn't have any issues fitting mine at all
@sTuPiDiScOoL_ Жыл бұрын
Sick mate quick question is there any mini GT or other body's that will fit this sg 1603 mate cheers man
@WTFRCCars Жыл бұрын
Tbh there are loads of bodies that can be made to fit most rc's it's just a case of making body mounts :)
@sTuPiDiScOoL_ Жыл бұрын
@@WTFRCCars any you could recommend that would work mate and we're could get body mounts made please mate I've been searching absolutely ages now want a little GT body or something 😂
@WTFRCCars Жыл бұрын
If you search 1/16 body shell you will find stuff like this that should fit [£22.97]ZD Racing EX16 S16 1/16 RC Car Spare Body Shell w/Sticker Sheet Painted 6650 Vehicles Models Parts Accessories RC Parts from Toys Hobbies and Robot on banggood banggood.onelink.me/zMT7/zlwg0p29
@sTuPiDiScOoL_ Жыл бұрын
@@WTFRCCars cheers mate seen that one but that only one don't think any delta plastik body's fit and neither do phat bodies mate it's 170mm wheelbase and mine is 290mm long custom cf max10 combo build mate thought delta or any others would have loads but literally none mate
@sTuPiDiScOoL_ Жыл бұрын
Would you recommend these metal parts mate or keep stock if could go back in time my sg is custom cf build but stick front and rear assembly but unsure if this would be worth doing or not cheers man 🙏💚👊
@paulosrcs185 Жыл бұрын
I've got it in my amazon basket debating wether to buy it or not is it worth the money do u notice any difference in the driving or not
@WTFRCCars Жыл бұрын
Hard to say it does tighten up all the suspension but it's as much for looks as it is for handling :)
@paulosrcs185 Жыл бұрын
@@WTFRCCars sold 🤣🤣
Fabiosa Best Lifehacks
Рет қаралды 19 МЛН
Friendeez
Рет қаралды 16 МЛН
Jimmy Carr
Рет қаралды 1,7 МЛН
CustomToyRevolution
Рет қаралды 8 М.
Fabiosa Best Lifehacks
Рет қаралды 19 МЛН