No video

2010 Vauxhall Vivaro 2.0L Diesel Clutch Replacement

  Рет қаралды 233,401

Kevin-Albert Williams

Kevin-Albert Williams

Күн бұрын

07376369067
www.williamsmo...
Support the Channel Donate:
www.paypal.com...

Пікірлер: 484
@ADAMH0
@ADAMH0 3 жыл бұрын
I did one of these this week and thanks to your video, it showed me that it can be done without lowering or removing the subframe (as opposed to many other guides). The gearbox was bloody heavy though, and you made it look light! Thank you for taking the time to upload these videos and also for thinking about your camera placement so people can actually see what you are doing.
@philipsquire9056
@philipsquire9056 3 жыл бұрын
I "dropped" the gearbox out of mine last night, not just bloody heavy but tricky get out of that gap. Mr Williams moves like it's a bag of sugar :O
@chrisbatcheldor9328
@chrisbatcheldor9328 2 жыл бұрын
@ADAMH0 how long did it take you start to finish?
@ADAMH0
@ADAMH0 2 жыл бұрын
It was a few months ago that I did it but it took me most of the day so approx 6hrs. It's the weight of the box and the small gap to get it in and out that was tricky.
@Medladha
@Medladha 2 жыл бұрын
You're a superman at your job. They way you lift this beast of a gearbox with your hands and belly is a piece of art on its own. Hats off to you and your work.... You're a genius mate. You make this job look like a piece of cake while we all know it's not that easy. Thank you for the uploads too... Brilliant filming! You're perfect in all you do. Keep it up!
@kevinpalmer7452
@kevinpalmer7452 4 жыл бұрын
I’m mechanic 45 years and counting your works good bud
@WMCS
@WMCS 4 жыл бұрын
Thank you. Really appreciate the feedback. More so because you’re an experienced mechanic yourself.
@bngh12ful
@bngh12ful 3 жыл бұрын
Why would owner didn't want new driveshaft installed, this is mot fail.
@kevinkerr8310
@kevinkerr8310 3 жыл бұрын
Av been a mechanic for 42 years and still going , me personally I would have spent another 15 mins taking the rest of the front off for easier access just done my own van swing radiator remove front crossmember so much easier , but each to his own
@aston0708
@aston0708 3 жыл бұрын
I fully anticipate that these videos will eventually make their way onto DVD,,,,,these are the Gold Standard of how to change clutches and are as good as if not better any Haynes manual ,,,,A1 all round
@jameswright2521
@jameswright2521 4 жыл бұрын
Your videos helped me replace a clutch in my parents car. I couldn’t do it without your videos so please keep them coming.
@WMCS
@WMCS 4 жыл бұрын
Thanks for the feedback James. Glad to hear the video came through for you.
@zachrochester3432
@zachrochester3432 Жыл бұрын
Thankyou for taking the time to make this video, I'm a painter by trade and have never even done my own brakes before. This weekend I successfully changed my clutch thanks to your vid. You've saved me a few quid! I owe you a pint!
@builtstrongertolastlonger3158
@builtstrongertolastlonger3158 3 жыл бұрын
What a ball ache of a job to do a clutch on a Vivaro. Dreading doing this one . Your video will be saved and I will study it for the next few weeks definitely need to especially the amount of stuff has to be undone. Thank you for taking your time to post these quality videos and the extra time it takes because you are recording the job for us viewers and subscribers. Much appreciated. top bloke excellent work and very helpful video 👏💪👊
@Chris-jy3dm
@Chris-jy3dm 4 жыл бұрын
Absolutely awesome you make it look so easy I've changed clutches on my drive where I was younger I'm now 63 and got arthritis in my wrists and thumbs. Can't do it now I've got so much respect for you for making it look easy great video again
@WMCS
@WMCS 4 жыл бұрын
Chris nice to hear from someone with a bit of experience on the subject. Really appreciate your feedback. Hope you’re keeping well .,
@Chris-jy3dm
@Chris-jy3dm 4 жыл бұрын
@@WMCS Cheer's Kevin for the reply yes keeping well Hope you are too. I still do my own service work insignia vx line automatic 37000 so far it's due a gearbox oil Chang. Cheer's Kevin
@mikebryan544
@mikebryan544 2 жыл бұрын
Took me two days, fair play putting that box in by hand. I got mine out by hand and it pinned me to the floor! Luckily neighbour steered the trolley jack to get it in. Doing that in one day is a real measure of your skills. Thankyou
@martprice7726
@martprice7726 3 жыл бұрын
I have watched this 50 times brilliant I've just done mine.Thanks.
@WMCS
@WMCS 3 жыл бұрын
Glad to hear the video came through for you. Thanks
@user-dw6jt8rb8v
@user-dw6jt8rb8v 4 жыл бұрын
I am from Iraq and I follow you continuously..I am very impressed with your work..You are a wonderful man..I learned a lot from you..but more moments that frighten me when the gearbox comes down to your stomach I fear you you will be harmed ... but you are very adept as you work this hard work On your own, you also have trouble shooting .. Thank you very much
@WMCS
@WMCS 4 жыл бұрын
Thank you 😊.., really appreciate the support and feedback.
@Suttybutty
@Suttybutty 3 жыл бұрын
you make everything look really easy bro I did the older vivaro today the gearbox weighs an absolute ton 👊🏻
@philipsquire9056
@philipsquire9056 3 жыл бұрын
I just watched closely when he actually lifts the gearbox down and he doesn't even seem to grimace from the effort. I'll get my lad to help me with mine I think :)
@philipsquire9056
@philipsquire9056 3 жыл бұрын
@@okornel Yeah absolutely but that doesn't make it any lighter :D
@ParaSteph73
@ParaSteph73 Жыл бұрын
I have traffic 2, 115 dci 2008: I used this video which allowed me to change my clutch alone in two days, I say a big thank you.
@alessandrer3616
@alessandrer3616 4 жыл бұрын
The best mechanic in UK ! Thanks for sharing ! Respect man !
@WMCS
@WMCS 4 жыл бұрын
Thanks a lot for the feedback.., much appreciated as always.
@sinanmehmet2038
@sinanmehmet2038 2 жыл бұрын
Did another one on my back today thanks to your video One very heavy gearbox to say the least! One thing I tried today that sped the job up was rather than undo the bottom ball joint nut, just undo both shock Absorber nut and bolts and that allows the driveshaft to come out of the hub without removing any lower suspension components saved a bit more time, love your video's and you must be strong as Eddie Hall to handle the gearboxes the way you do! I've done two on my back and loads on the ramp and they don't get any lighter 🤣
@WMCS
@WMCS 2 жыл бұрын
Thanks for sharing Sinan… new ways always comes when you’re doing it .. great you’ve found a quicker way to pull the driveshaft out .. you’re absolutely right they don’t get any lighter those gearboxes
@rmzxr4395
@rmzxr4395 2 жыл бұрын
You made them driveshaft removals look like kids play, never comes apart so easy for me, although as a Vivaro owner I am quite an expert at the front end strip down as it all needs to come off to do just about any job. Great camera work as well as the tools.👍
@markfindlay8636
@markfindlay8636 2 жыл бұрын
I like your videos and it helped me change a clutch on a Renault master. Didn't want a baby elephant on my chest so l used a jack and and braced a 2x4 across the inner wings and it worked quite well. Thanks for your efforts.
@slickmouse
@slickmouse 4 жыл бұрын
This guy is game, doing this clutch or any other in the street. Kudos.
@kevinkerr8310
@kevinkerr8310 3 жыл бұрын
Not long done mine on the street and am 59 , but that was mentioned about it being a task on the street by a local garage owner who I know
@deeboal8643
@deeboal8643 4 жыл бұрын
Top job again , heavy wee box hats off to ya for lifting some of the ones on your videos from lying on your back 👏👏
@WMCS
@WMCS 4 жыл бұрын
Thanks for the review. Appreciate it.
@nailem413
@nailem413 4 жыл бұрын
Respect ✊ great job 👏👏
@kylerichardson2230
@kylerichardson2230 3 жыл бұрын
if i done a video like this most of the video would be me looking for sockets 🤣🤣
@darrenwilliamson3614
@darrenwilliamson3614 3 жыл бұрын
We folks done my van last week. New clutch kit fitted also had the gearbox refurbished too. I did have a problem with connecting the clutch fuild pipe back on it keeped leak there is a small rubber grommet seal that goes on to the connector and got one on ebay. But part for that went well. It did cost me around £1000 to do my self new cluch kit and the gearbox refurbishment cost £575. Also I had to buy a engine lift to get the gearbox back on as I could not lift it was so heavy. Good luck folks.
@andrewdace1314
@andrewdace1314 3 жыл бұрын
You are the best mechanic I've ever seen a true craftsman
@WMCS
@WMCS 3 жыл бұрын
Hi Andrew .., thanks for taking time to visit the channel and leaving a feedback..
@karlglynn3230
@karlglynn3230 3 жыл бұрын
Just want to thank you for a great video, used it to change my clutch and slave cylinder on my own Vivaro this week. Surprised a few people with the fact I has completed at the side road, all this was done with the help for your video. Thanks again really appreciate it.
@WMCS
@WMCS 3 жыл бұрын
Karl thanks for sharing .,, really glad to hear the vid came in helpful.. and great to hear it all went well.
@bazzafireblade6068
@bazzafireblade6068 9 ай бұрын
Absolutely first class tutorial man, tremendous detail and clarity ,many thanks I watched the whole video thru, the best viewing on the tele tonight
@mikeraphone6745
@mikeraphone6745 3 жыл бұрын
Top job. When I do them vans I leave all the bits on the shut plate even the intercooler and strap them to the bonnet and in turn tie the bonnet to a roof rack or even the back doors . Your strong mate as I use a over head winch to move the gearbox around while I guide it underneath with the remote in my hand . Still hard work on your own . Your a skilled man
@randomplanet001
@randomplanet001 Жыл бұрын
It's a pity you don't cover South Wales, I'd be calling you now! Amazing video, well shot, and an outstanding repair.
@bjornstrandberg7188
@bjornstrandberg7188 3 жыл бұрын
Really nice work. I'm replacing my gearbox soon, and this will be my guide. Thank You!
@gavey100
@gavey100 4 жыл бұрын
You can do them without taking all the front off on a ramp but struggle on the deck I have done exactly the same thing a few times. Dedication mate great job 👍🏻
@WMCS
@WMCS 4 жыл бұрын
Thanks for the support. Really appreciate the feedback from someone like yourself that’s actually done it.
@MrGlenfraser
@MrGlenfraser 4 жыл бұрын
The Clutch Ninja......at it again. I found the Picasso of interest the other day only as I have one. Good work bro. If I ever need a clutch done on mine in Southend On Sea Ill give you a shout for a quote..
@WMCS
@WMCS 4 жыл бұрын
Thanks for the feedback. Much appreciated. God’s honest truth I was in Southend on sea today 😁🤩.., probably drive past you by the traffic lights.
@MrGlenfraser
@MrGlenfraser 4 жыл бұрын
@@WMCS Not the best day for the Seaside!! what car were you doing today?
@WMCS
@WMCS 4 жыл бұрын
Glen Fraser it was a 1.3 vauxhall combo. Clutch and gearbox.
@MrGlenfraser
@MrGlenfraser 4 жыл бұрын
@@WMCS Wow. You must be good with lifting as they are heavy old things the clutch housing etc....hop you went down the front afterwards and got some chips
@alfalfir4928
@alfalfir4928 4 жыл бұрын
wow I have just put my gear box back in today, I so wish I had seen this video. Great step by step walk through.
@WMCS
@WMCS 4 жыл бұрын
Thanks for the feedback. How did you get on with your repair.
@SoloBench
@SoloBench 6 ай бұрын
Love the audio and background noises in these videos. It's like a film
@WMCS
@WMCS 6 ай бұрын
Mate the amount of coordination it took me to get them lads to be buzzing in the background is on a next level …🥳🍻🍻
@SoloBench
@SoloBench 6 ай бұрын
Definitely better vibe than in a workshop
@aleksaleks7977
@aleksaleks7977 4 жыл бұрын
Lol you removed and installed the transmission without to remove the subframe! At least 50 kilograms is the transmission. Well done:))
@WMCS
@WMCS 4 жыл бұрын
That’s it mate..., operating in confined spaces is my specialty 😁
@aleksaleks7977
@aleksaleks7977 4 жыл бұрын
Kevin-Albert Williams thank you for the video it is what I was waiting for :)
@nathanshaw3513
@nathanshaw3513 3 жыл бұрын
Man that looked a mission.. photographic memory or what 👏
@nitronixasd
@nitronixasd 4 жыл бұрын
Wow! The length of this video says enuff! Changing the clutch - 10 mins, getting to the clutch - about 2 hours. Would have been nice to see the state of that clutch when it came off cos it looked proper dead! As usual, awesome vid....shame weather was pants for you tho!
@WMCS
@WMCS 4 жыл бұрын
😂🤭.., I even try to compress the editing .., weather was a bit shaky at first. But held up nice over all ... Ooo clutch was literally on metal. There was nothing left ..
@dongoban
@dongoban 8 ай бұрын
I just want to say thank you for uploading this, I watched this video on repeat and learnt how to change the clutch on my 2011 Vivaro... You really made that gearbox look lighter than it is, I struggled! deffo need to get down the gym 😀
@WMCS
@WMCS 8 ай бұрын
That’s good you managed it. It definitely is a heavy unit.
@dongoban
@dongoban 7 ай бұрын
Would you believe I've had it off again since this comment...lost 5/6 gears, bloody synchro spring decided to break apart and jam itself up... I have successfully managed to rebuild my gearbox, new 1/2, 5/6 synchro rings and springs...an absolutely terrifying job for a DIY@@WMCS
@Britishfever456
@Britishfever456 4 жыл бұрын
What a beasty of a job! I would have been happier seeing some new CV boots go on there whilst the driveshafts were off?
@WMCS
@WMCS 4 жыл бұрын
Thanks for the review. Customer only wanted a clutch and nothing but a clutch. No love making. No wife swap. No chin wagging. 😉
@mathewwilkinson2834
@mathewwilkinson2834 3 жыл бұрын
If it didnt come in for it then you dont do it... you get no thanks for it apart from moaned at when bills higher....do the job in hand and advise further repairs on invoice 😉
@nevillecunnan8480
@nevillecunnan8480 3 жыл бұрын
You are amazing mate. It’s a pleasure watching you working
@WMCS
@WMCS 3 жыл бұрын
Thanks for the support Neville 🍻🍺✨✨
@vincentbrice5991
@vincentbrice5991 Жыл бұрын
Fantastic video, a great help, and so good that it shows the reassembly. Yes, trying to man handle the gearbox back up was tricky, but the hardest bit for me was removing and refitting that black plastic cable trunking 😆Many, many thanks 👍
@johncone9516
@johncone9516 3 жыл бұрын
I think only Vauxhall could of made it so difficult compared to the Transit. Good work.
@swms9679
@swms9679 4 жыл бұрын
Damn that was a lot of disassembling, great job .
@WMCS
@WMCS 4 жыл бұрын
It wasn’t too bad. But yes a few things to come out.
@swms9679
@swms9679 4 жыл бұрын
Kevin-Albert Williams do you film every time you do a clutch replacement?
@ianaristotlethompson4186
@ianaristotlethompson4186 3 жыл бұрын
Once again fantastic job. Lots of ancillaries to move to get at it. Brilliant camera work too.
@WMCS
@WMCS 3 жыл бұрын
That’s it Ian. A few things in the way. The thick wiring in them requires a bit of patience.
@garethjones8047
@garethjones8047 3 жыл бұрын
My Father has a 61 Ford Tourneo as a Taxi. For once, this job makes ford designers look clever
@JeanMarcVANBELLE
@JeanMarcVANBELLE 9 ай бұрын
One of the most phantastic video clips i recently saw! Wow, and without the special lifting equipment of the garage that does it only from beneath. This is a great, super great video! i would call you for any repair, so much trust this spreads in your mechanical skills!! +je
@michaelbrennan8451
@michaelbrennan8451 2 жыл бұрын
bought a Vauxhall vivaro 08 about 3 months ago to convert into a campervan.so I got this van and it was basically setup campervan wise in the back with switchboard for electricity and leisure battery etc plus it was insulated aswel and had a carpet finish I thought I was onto good ting here the van was absolutely spotless regarding it's body work but of course their are hiding gremlins as per usual.so heading to my mam one day the lights start flashing on the dashboard stop stop 🛑 .went to garage I was told the injectors were knackered.got two new injectors same ting happened.he then told me tht the injectors were seized in the head the other two injectors?I said why didn't you tell me tht at the start ? no answer .anyways it was cost to much money to get new injectors and for him to take seized injectors out.got reconditioned engine with four new injectors it worked out cheaper.light still came on after installing new reconditioned engine.so I went back to my garden took out the air intake box and also took off the cover tht was covering the injectors and low and behold one of the injectors was pissing diesel out of it .he basically took old injector out of my old engine without o ring and put into new engine.so I said this to him and he just said no no no leak 😂😂😂 but what he didn't no was I took serial numbers of both injectors he took out of old engine and wrote them down.so he showed me injector and Said this is your problem.i looked at him and said thts the old injector from old engine he said no no no it's not .I then showed him the number off the injector and he then said ahhh must be different injector with same serial number 🤣🤣🤣🤣🤣 absolute cowboy caught by the balls .as I was saying regarding yourself.you can see you love your job and you don't try and take advantage of people.keep the good work up pal.my van is now in getting a reconditioned gearbox from a new mechanic thankgod .she will be like a new van after everything I've done to her🤣🤣🤣🤣
@maxthecaddy8451
@maxthecaddy8451 4 жыл бұрын
you are the ninja clutch master 👍👍👍👍👍
@heiakraft7880
@heiakraft7880 4 жыл бұрын
Hallo Kevin, ein wertvolles Video für mich ! Habe einen Trafic und muss auch bald das 5 Gang Getriebe ausbauen (Synchronringe ) .Danke und Grüße aus Ostdeutschland !
@lieberfreialsgleich
@lieberfreialsgleich 4 жыл бұрын
Heia Kraft Hölle. Er macht das so locker, KZfaq eben. Ich will garnicht wissen, wie lange er tatsächlich braucht. Mir reicht schon die Vorstellung 50kg zu heben. Das packt man nur wenn man das jeden Tag macht. Sein Zentrierwerkzeug gefällt mir.
@msrtinshutt8518
@msrtinshutt8518 2 жыл бұрын
Hi Kevin took my gearbox out today for new clutch and slave cylinder putting back together tomorrow it was the slave cylinder that failed so doing the two. your video is brilliant great help us to work on cars all the time but it’s been awhile since I work on a car or van
@normancassin6416
@normancassin6416 Жыл бұрын
Best KZfaq vid I've seen so far on taking the box out on one of these👍
@martynwellfair8615
@martynwellfair8615 Жыл бұрын
The last 2 I've done of these required me to re-use the CSC pipework as the supplied pipes from LUK were a different angle, I simply swapped the new "o" rings over onto the old pipework... Also I'm still in two minds on if moving the radiator or the subframe gives additional clearance ( i don't lift the boxes in like you 🙂)...Ive also ditched my pressure bleeder for these jobs as I found it actually made bleeding worse...good Vid!
@scottblackett5417
@scottblackett5417 4 жыл бұрын
Video starting with the sound of a Stihl Saw filled me with confidence
@WMCS
@WMCS 4 жыл бұрын
Scott glad you appreciated the special effects in the background. Took a lot of effort to organise that 😁
@scottblackett5417
@scottblackett5417 4 жыл бұрын
Kevin-Albert Williams 😂
@drexxore
@drexxore 4 жыл бұрын
Superb video as always dude!! I’m a HGV tech going on 10 years now. I’d love to see how quick you could do a truck clutch 😂 there isn’t as much in the way 😂
@WMCS
@WMCS 4 жыл бұрын
🤩🤩careful now I might be tempted to take you up on that offer 😂😂🤭.., Thanks for the review tho. Much appreciated
@phillwilliams3399
@phillwilliams3399 3 жыл бұрын
Got 1 in work tomoz, always watch how you go about it first good video 👌
@WMCS
@WMCS 3 жыл бұрын
Hi Phill ., we share the same surname., and both mechanics 🧰😁.,, how did you get on with the one you did.
@phillwilliams3399
@phillwilliams3399 3 жыл бұрын
@@WMCS Haha i know awesome! Went really well i knew were all the bolts were after watching your video thanks😅👌 was in for a recon gearbox still fit new clutch kit tho . Told my mate in work if he knows hes got a clutch to do to watch you the king of clutches 👍👌
@michaelbrennan8451
@michaelbrennan8451 2 жыл бұрын
not many machanics like you around.love your work.
@bhbh5665
@bhbh5665 7 ай бұрын
Absolutely brilliant mechanic, very good video.
@capmultser
@capmultser Жыл бұрын
This bloke is worth his weight in gold. Apart from the split gaiters.
@dannyunbekannt3333
@dannyunbekannt3333 3 жыл бұрын
Respekt vor Ihrer Leistung.👍👍👍
@FatherJack-b1u
@FatherJack-b1u 2 жыл бұрын
Hats off to you for doing such a big job outside on your back a lot of the time 👍
@vikurti
@vikurti 3 жыл бұрын
Thanks, very detailed video without unnecessary commentries.
@garagegrump_6627
@garagegrump_6627 2 жыл бұрын
Thanks to your vid I got one done no frame down and no issues thanks for sharing
@WMCS
@WMCS 2 жыл бұрын
Thanks for the feedback
@OSF2
@OSF2 4 жыл бұрын
lifting that change is not for everyone...compliments!
@kiamania
@kiamania 4 жыл бұрын
You have a good memory, i would have loads of spare bits . Lol
@philipsquire9056
@philipsquire9056 3 жыл бұрын
I'm about to do this job and remembering where everything goes is my main worry. That and dropping the gearbox on my face.
@sudinebabz8651
@sudinebabz8651 4 жыл бұрын
👍🏽 c est un gros travail, bravo warrior clutches 👏
@WMCS
@WMCS 4 жыл бұрын
Merci bient sudine...😊
@TCUNovel
@TCUNovel 2 жыл бұрын
Really good video pal! You literally made it look easy as antrhubf when Jesus that box is bloody heavy!
@WMCS
@WMCS 2 жыл бұрын
It’s a heavy box indeed 🎄🍻😆
@marshallgarner7903
@marshallgarner7903 2 жыл бұрын
Thanks for this video it's a great help to me, mind I'm changing my engine as well, it's a hard slog, I'm 69year old man, 10years ago no problems but today it's took me almost 3weeks😂🤣😅🤣🤣😂🤣 good job I'm retired, anyway thank you 👍👍👍👍👍👍👍
@WMCS
@WMCS 2 жыл бұрын
Hope you managed it alright.
@martinmurray1369
@martinmurray1369 4 жыл бұрын
excellent video Kevin and i agree with everyone else you made it look very easy, but also very daunting , with the amount of stuff that had to be removed. You also made lifting that gearbox off and back up, look so easy. it weighs a ton :D anyway thanks to you and this video , you made a very daunting task that was a lot easier, but it still took me all day. Last clutch i changed was on a mini cooper back in the 80's :D Thanks again
@WMCS
@WMCS 4 жыл бұрын
Martin thanks for a detailed review ..,, I suppose it’s taken me hours and hours of continuously beating on my craft to get to this stage ...,, it’s hard work but it’s what I do every single day ..,, I work alone and travel far.., up to two hours drive one way ..,, I prepare myself always physically.. Good vitamins and minerals and essential oil. a healthy diet and plenty of rest ..,, especially come winter time .,,, I really appreciate the time you’ve taken to share on our forum.
@johngault3693
@johngault3693 4 жыл бұрын
You make that look easier than it is.. Some amount of work... It can never be said you dont work for a living..
@WMCS
@WMCS 4 жыл бұрын
😆🤩.., thanks for the feedback..., really appreciate the support.
@FullThrottleUK
@FullThrottleUK 2 жыл бұрын
Thank you so much for the step by step video. Just removed my Van's GB .
@gegegege7823
@gegegege7823 4 жыл бұрын
bravo toujours aussi professionnel beaucoup de travail sur ce camion pour changer l'embrayage bravo encore
@WMCS
@WMCS 4 жыл бұрын
Merci bient Gege..,
@coolrider91
@coolrider91 3 жыл бұрын
Professionnel !!!😂😂😂 A grand coup de marteau sur les bras de suspension pour dégager les rotules inférieures... il existe des outils pour ça! tout à la clé à choc, pas de respect des couples de serrage ... j' te change le kit embrayage, mais pas le joint spy de pignon à queue à moins de 10€, histoire d'assurer mes revenus car si il se met à fuir , je te redéposerais de nouveau la boite pour le remplacer. 😁... ainsi que le disque d'embrayage qui sera imbibé d'huile de boite... Je ne te remplace pas non plus les joints spy de transmission, trop facile quand la boite est déposée et les transmission enlevées, tu reviendra aussi plus tard pour le faire😁... Très professionnel en effet!!!!😂😂😂 Le pire, c'est de voir tous ces gens qui applaudissent 😢
@coolrider91
@coolrider91 3 жыл бұрын
58:34 - la bague de protection des lèvres du joint spy ( bague blanche sur l'arbre) n'est pas remise en place sur le joint avant d'enfiler la transmission. 59:49 - Je te remets aussi la transmission droite en place, sans remplacer le soufflet qui est éclaté! 1:00:03 et 1:02:14 - les tôles pare chaleur de protection des rotules inférieures droite et gauche qui ont été tordues au démontage ne sont pas remise en place > direction la poubelle. on remplacera les rotules quand le caoutchouc sera cuit par la chaleur des disques. 1:18:30 levage du véhicule sous le berceau moteur (qui n'est pas un point de levage) Bref je ne confirais pas mon véhicule à ce margoulin que tout le monde félicite pour son "travail"! remarque, c'est facile d'impressionner un publique qui n'y connais rien!
@kamilkoscielniak7741
@kamilkoscielniak7741 4 ай бұрын
Great video pal Doing mine tomorrow morning hopefully it will be bit easier with your video . Thanks
@rodwanbornaz1282
@rodwanbornaz1282 3 жыл бұрын
Those impact ratchets are real treasure.
@truth_only4082
@truth_only4082 3 жыл бұрын
Well done mate. Great job with great filming. Very professionally done. My salutes to you.
@WMCS
@WMCS 3 жыл бұрын
Thanks for the support and stay tuned for more videos coming up.
@lincspoacher5071
@lincspoacher5071 4 жыл бұрын
I’ve worked on heavy and light commercial vehicles as well as cars in workshops and the open air workshop for over 30 years before arthritis took hold. You make one of the longest jobs you can do appear very straightforward. Well done to you, there is some real skills at use here from your knowledge of so many different vehicle types to the methodical way you work. I always used to use white grease on the bell housing bolt holes, dowels and end of the shaft, is there any reason you use rubber grease? Again well done!
@WMCS
@WMCS 4 жыл бұрын
Thanks for the great review. Very much appreciated.., especially from someone that’s done it. .., Red rubber grease stops any oxidisation of the threads .., which is often the case on new alloys. You get the white powdered rust. And for the spline. It will eliminate any clutch drag.., which is a big cause for premature wear on the friction plate. .., Again from powdered rust.
@pro_power_mx
@pro_power_mx 3 жыл бұрын
Well done mate very good video saved me a lot of time !
@robisam1624
@robisam1624 3 жыл бұрын
hats off for you.great Job.good video quality.smart and cool working techniques.keep the good work,though I have done often before I enjoyed your video.big BRAVO
@pistonbroke
@pistonbroke 3 жыл бұрын
I've done loads of vivaro clutches and I take the subframe off. I didn't know you could get the 'box in and out with the subframe on and it looked easy. Bloody heavy gearboxes they are too. I wouldn't do one on my back though.
@WMCS
@WMCS 3 жыл бұрын
They are definitely heavy. I’d say about 60-70kg. Great to have a review from a fellow mechanic. 🍻🍻
@philipsquire9056
@philipsquire9056 3 жыл бұрын
@@WMCS This answers a question I've been wondering about. That's a fair bit to handline like that. I'll get my son to help me :)
@Mcintechmobilemechanic
@Mcintechmobilemechanic 4 ай бұрын
Milwaukee 1850 cant beat em best impact guns ever designed i love the rachets to
@LawnRight
@LawnRight 3 жыл бұрын
Just watched the whole video.... and I'm "no mechanic" - I feel good cause I just sprayed wd40 on my gear cables (Vivaro 2011 sportive diesel as in this video) as the gearstick was stiff going into gear.. it worked, although I guess temporary
@FatherJack-b1u
@FatherJack-b1u 2 жыл бұрын
The PTFE WD-40 stuff will last longer
@LawnRight
@LawnRight 2 жыл бұрын
@@FatherJack-b1u So far so good.. 11 months on and no issues.. will see how winter goes but its held out so far
@westawesta9063
@westawesta9063 4 жыл бұрын
You are a humble person.j adore regarder tes vidéos continue tu es very good
@WMCS
@WMCS 4 жыл бұрын
Merci bient mon Amis.
@victorchinas
@victorchinas 4 жыл бұрын
Good work..... respect....... my best recommendation is to use a good facemask, specially for the clutch material (asbestos)
@WMCS
@WMCS 4 жыл бұрын
Thanks for the great feedback and support. Really appreciate it. A face mask is very important for the dust. The clutch we have here doesn’t contain asbestos. But nonetheless the dust isn’t good for the lungs.
@Budge.Bm.r75
@Budge.Bm.r75 Жыл бұрын
Great video, I am changing the gearbox in my Primastar and this is so helpful. Thank you.
@JJ-zg1hh
@JJ-zg1hh 3 жыл бұрын
Top work indeed. No one can accuse you of being lazy! I changed the clutch in my 2005 Mini Cooper this summer and it took me 6 weeks! I notice you didn't put any grease on the release bearing. Is that intentional? Plus is it good or bad practice to put threadlock on the pressure plate bolts? Like you I didn't bother - does anyone? Keep up the good work!
@fred24715
@fred24715 3 жыл бұрын
Chilled me out watching this, cheers pal 😀
@accipiternisus649
@accipiternisus649 3 жыл бұрын
*Bravo maestro!* Cheers from Serbia
@WMCS
@WMCS 3 жыл бұрын
Hello to you in 🇷🇸 Serbia ..,
@williamellington7708
@williamellington7708 4 жыл бұрын
Keep up the incredible work mate
@WMCS
@WMCS 4 жыл бұрын
Thanks for the feedback William.
@llivetodisangrato7905
@llivetodisangrato7905 2 жыл бұрын
Complimenti per il mestiere che conosco bene anchii ne ho fatte tante di frizioni a quel modo e conosco la fatica fisica di tirare giu un cambio senza sollevatore 👍👍💪
@philipsquire9056
@philipsquire9056 3 жыл бұрын
I'm impressed how easily the hydraulics seemed to bleed. Mine's a nightmare to get right, still not there yet-
@WMCS
@WMCS 3 жыл бұрын
Hope you manage it alright .,
@philipsquire9056
@philipsquire9056 3 жыл бұрын
@@WMCS Wow! The man himself! This video got me through this so I'm sure it'll be fine.
@ChrisGoesExploring
@ChrisGoesExploring 2 жыл бұрын
Amazing guide. Such good camera angles. Cheers mate!
@WMCS
@WMCS 2 жыл бұрын
Thanks Chris 🍻🍻🍻
@peterhoath8598
@peterhoath8598 3 жыл бұрын
I decided to attempt my daughter's van after watching your vidio, I changed the full clutch as you did, it went fine but wouldn't have tried without watching yours first. Her van has developed a slight ticking which disappears when you press the clutch I just hope I don't have to strip it down again, any thought would be appreciated, again than you.
@WMCS
@WMCS 3 жыл бұрын
Hi Peter ., that’s great to hear you managed that repair with the help of the video. ✨🍻🍻✨.,, sometimes you’ll get a little noise ., if it’s not affecting the drive and clutch system it’ll go away on its own.
@josephjackson5330
@josephjackson5330 4 жыл бұрын
who is this guy , im very impressed you're work .
@WMCS
@WMCS 4 жыл бұрын
Thanks for the review.., very much appreciated
@sydneypauley3187
@sydneypauley3187 8 ай бұрын
Great tutorial by someone with real experience. Disappointed you left that ripped cv boot on.
@WMCS
@WMCS 8 ай бұрын
.
@darrenclay9859
@darrenclay9859 2 ай бұрын
Great vid kev you must be as strong s an ox nice job well done
@edivollgas719
@edivollgas719 3 жыл бұрын
Thank You very much, best video by far on this task on youtube I found. You did not drop the front axle from the body as advised in oem repair manual ? Regards
@jayhoram2875
@jayhoram2875 3 жыл бұрын
You are the best mechanic I've ever seen your a true craftsman im going to be doing my gearbox soon on my Vauxhall vivaro 58 plate full clutch kit can i ask
@WMCS
@WMCS 3 жыл бұрын
Sometimes AP but usually LUK
@jayhoram2875
@jayhoram2875 3 жыл бұрын
@@WMCS What the red stuff he put on the splice please thank you
@jayhoram2875
@jayhoram2875 3 жыл бұрын
@@WMCS thank you Kevin for your advice im putting a LUK clutch kit on my vivaro this week but the clutch kit comes with the csc i don't have the right angel little tub that fits on the end i have a complete tub with the right angle molded in i guess they do that to stop leaks
@michaelthompson2135
@michaelthompson2135 2 жыл бұрын
Very good video, didn't notice much use of a torque wrench.
@brucemoxon7383
@brucemoxon7383 Жыл бұрын
Hi Kevin , great work by a true master of his craft I looked up your video as i,m thinking of buying a vivaro but have read that the gearboxes can suffer from over preloaded bearings , so i thought to look at the difficulty in getting them off . I have done a synergie gearbox , previa gearbox and a partner gearbox in the past . The synergie was an engine out job , but the partner i just managed with it in sutu. i,m pleased to see that the Vivaro can be done without either engine removal or dropping the subframe . What make is the impact uj that you use ? standard ones wont take the stick . Also what fluid are you using to clean ? and can it be bought in bulk? . You are obviously a strong chap . I noticed that the video is 1 hr 18 min long but it doesn't show all the jumping up and down and crawling in and out which in my experience is by far the most tiring aspect of these jobs , your very fit . i,m 66 now and dont relish having to do this sort of thing anymore , but as ive never paid a garage in my life , i dare say that if the need arose , your excellent video will cause me to break out the spanners again . Thank you so much for your inspiration and may you remain well enough to continue for years . RWD cars where a doddle in comparison . regards
@damianostrich
@damianostrich 10 ай бұрын
Very useful tutorial. Thanks.
@peteduckworth4674
@peteduckworth4674 3 жыл бұрын
Epic work top job just wondering why the customer did not change the split boot when you had it off would have made sense.
@WMCS
@WMCS 3 жыл бұрын
He went down to his local garage for that.
@eg6tec
@eg6tec 3 жыл бұрын
Amazing video from start to finish, thank you for your efforts
@thomasadmiral3401
@thomasadmiral3401 4 жыл бұрын
you are in good strength, it is good to be heavy in such a gearbox!!!!
@faiazmd8562
@faiazmd8562 4 жыл бұрын
Another wonderful video as usual,.. Hats off!!
Nissan Primastar 2.0L Diesel Clutch replacement.
1:10:14
Kevin-Albert Williams
Рет қаралды 44 М.
2015 Vauxhall Astra 2.0L Diesel Clutch Replacement
1:11:22
Kevin-Albert Williams
Рет қаралды 79 М.
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 48 МЛН
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 39 МЛН
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН
SPILLED CHOCKY MILK PRANK ON BROTHER 😂 #shorts
00:12
Savage Vlogs
Рет қаралды 46 МЛН
2016 Renault Traffic 1.6 DCI (115) Clutch Replacement
1:48:47
Kevin-Albert Williams
Рет қаралды 88 М.
Vauxhall vivaro engine injector removal
10:59
Mark smith
Рет қаралды 27 М.
Williams Mobile Clutch Service. Behind The Scene (Week 17/05/21)
2:08:55
Kevin-Albert Williams
Рет қаралды 91 М.
Williams Mobile Clutch Service. Behind The Scene (Week 24/05/21)
1:57:43
Kevin-Albert Williams
Рет қаралды 28 М.
How To Service a Vivaro Van Part 2  - Gearbox Oil
24:16
It's What I Do
Рет қаралды 27 М.
HOW to service a Renault Trafic 2.0 | Thomas Nagy
12:25
Thomas Nagy
Рет қаралды 181 М.
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 48 МЛН