No video

Karl hit and miss engine

  Рет қаралды 101,797

69MrSjani

69MrSjani

Күн бұрын

Karl 4 stroke hit and miss engine made from Bengs Modellbau kit.
(I uploaded this video again, because the original video is not available for some reason)

Пікірлер: 147
@timehunter9467
@timehunter9467 4 жыл бұрын
This runs so much better than others I’ve seen! Extremely smooth (as smooth as a hit and miss can be)
@worldbestpilot
@worldbestpilot 5 жыл бұрын
Exactly this is, how a model miss & hit engine should run and sound !
@69MrSjani
@69MrSjani 4 жыл бұрын
I'm glad you like it! Sorry to notice the comment late ....
@IndianaRog
@IndianaRog 5 жыл бұрын
Absolute perfection...thanks for sharing. I am most impressed with the build quality!!!
@69MrSjani
@69MrSjani 5 жыл бұрын
Thank you for your comment. I'm glad you like it!!
@rogerw.johnson2283
@rogerw.johnson2283 5 жыл бұрын
One beautiful engine. You should be proud of your skills.
@Rusty_stuff
@Rusty_stuff 3 жыл бұрын
Loosen your governor springs and it will coast longer like a hit and miss should. It’s a beautiful engine, very nice build.
@69MrSjani
@69MrSjani 3 жыл бұрын
Thank you for your comment! I'm going to try your suggestion!
@anythingoldmechanical
@anythingoldmechanical 5 жыл бұрын
Absolute minature perfection. If only i was good with a lathe! Well done 😉
@69MrSjani
@69MrSjani 5 жыл бұрын
I'm glad you like it!
@lionel400e
@lionel400e 4 жыл бұрын
69MrSjani wear can i get a small drain value like on your hit miss tank? Ken lionel400e@aol.com
@bamsefar1
@bamsefar1 5 жыл бұрын
All though made with basis in a kit; you again make quality-improvements; making this hit& miss -engine something unique. Great build !
@69MrSjani
@69MrSjani 5 жыл бұрын
Thank you, I'm glad you like it!
@tonyhalliday7323
@tonyhalliday7323 4 жыл бұрын
Beautifully made engine, well done
@69MrSjani
@69MrSjani 4 жыл бұрын
Thank you, I’m glad you like it!
@louiestark
@louiestark 2 жыл бұрын
My God that’s beautiful, like jewelry for mechanics.
@69MrSjani
@69MrSjani 2 жыл бұрын
I'm glad you like it!
@jameschaffe694
@jameschaffe694 4 жыл бұрын
Lovely engine, I have just finished my Karl Hit and miss and have spent all day trying to get it to run, it runs now at fast speed. Struggle to get it to run slow though... all takes time!
@jameschaffe694
@jameschaffe694 4 жыл бұрын
Fixed mine, re-made piston to 25.02 up from 25.99 runs perfect now
@69MrSjani
@69MrSjani 4 жыл бұрын
Thank you for your comment! It was not easy to adjust the air and fuel mixture... For a small (and fairly primitive) carburetor is almost impossible to achieve the 14: 1 air to gasoline ratio. I solved this by using petroleum as fuel. The Coleman camping fuel is ideal. By using petroleum, the fuel - air ratio will decrease to 9:1, and the small carburetor can handle the challenge. It worked for me, I hope it will help you too!
@jameschaffe694
@jameschaffe694 4 жыл бұрын
69MrSjani kzfaq.info/get/bejne/fdKEYKuHl5fGc6M.html
@electronicshelpcare
@electronicshelpcare 5 жыл бұрын
wow, that calls old is gold. thanks for your video
@69MrSjani
@69MrSjani 5 жыл бұрын
I'm glad you like it!
@allansame7256
@allansame7256 3 жыл бұрын
j no I in k
@vincehoffman179
@vincehoffman179 2 жыл бұрын
what e lovely engine, i can hear that sound forever
@olivvapor4873
@olivvapor4873 4 жыл бұрын
What an exquisite model ! Thanks for sharing 😊👍🏻
@MnACreations
@MnACreations 3 жыл бұрын
Beautiful engine!!
@69MrSjani
@69MrSjani 3 жыл бұрын
Thank you for your comment, I'm glad you like it!
@ArturPetrzak
@ArturPetrzak 5 жыл бұрын
Beautiful engine! Love it!
@69MrSjani
@69MrSjani 5 жыл бұрын
I'm glad you like it!
@forjusticehunter5528
@forjusticehunter5528 2 жыл бұрын
This hit and miss engine is so steady
@gwheyduke
@gwheyduke 4 жыл бұрын
Very good looking engine. Runs perfect, Well done.
@69MrSjani
@69MrSjani 4 жыл бұрын
Thank you, I’m glad you like it!
@danmartinrc
@danmartinrc 3 жыл бұрын
Excellent build! I am currently making a Farm Boy hit-and-miss engine. What fuel are you using in yours?
@69MrSjani
@69MrSjani 3 жыл бұрын
I'm glad you like it! As fuel I use a mix of Coleman fuel and 4-5 drops of wd40 on each refueling. This is perfectly proven, better than gasoline. (Even the smell of exhaust gas is much better)
@danmartinrc
@danmartinrc 3 жыл бұрын
@@69MrSjani thanks! I’ll give it a try when mine is finished.
@marvindebot3264
@marvindebot3264 3 жыл бұрын
@@danmartinrc Mate if you can get Marvel Mystery Oil where you live that's even better than the WD40, just 5 or 6 ml in a litre.
@alanlake5220
@alanlake5220 3 жыл бұрын
That is a thing of beauty
@69MrSjani
@69MrSjani 3 жыл бұрын
Thank you! I'm glad you like it!
@marcopruscini1603
@marcopruscini1603 3 жыл бұрын
Looks well built. My is not ready yet.
@69MrSjani
@69MrSjani 3 жыл бұрын
Thank you for your comment! I tried to build it well, and I would be happy to see your model when will be ready! Please send me a link!
@christopherblake2352
@christopherblake2352 3 ай бұрын
Any idea of how many watts or hp this can produce continuously? Im thinking of running on propane and charging a house battery on a sailboat on cloudy days.
@lordofbasement
@lordofbasement 5 жыл бұрын
Why is your engine running soooo well? What fuel do you use? Piston with rings? Spark advance? Valve timing? What is your secret? Every spark leads to a ignition, perfekt. I am stocked.
@69MrSjani
@69MrSjani 5 жыл бұрын
Hooohooohooo! Some difficult questions... The most important is the carburettor and the fuel. For 1 part regular gasoline you need 14 part air. With a small (and primitive) carburettor is almost impossible to achieve this mix ratio. Here is available a camping stove fuel from Coleman, what is a kind of petroleum. This is perfect for model engines! Probably this type of fuel is available in Austria too. You have to add 1 - 2 % WD40 to the fuel, like a mix for a 2 stroke engine. For this fuel you will need only 1:10 part air. Here is a link where you could see the fuel: www.canadiantire.ca/en/pdp/coleman-fuel-naphtha-0760044p.html#srp If you would like some more details, please give me your email address, and I will send some pictures as well...
@worldbestpilot
@worldbestpilot 5 жыл бұрын
In the future it will be hard for European manufacturers to compare with or even to beat approaching Chinese machines (offensively offered at some 50 % of Karl's kit price).
@69MrSjani
@69MrSjani 5 жыл бұрын
I agree with you, but this hobby is about quality, not quantity. I prefer to build a Bengs model or something that existed sometime even is expensive, rather than buy 3 cheap chinese designs...I didn't built any of my models, because the kit or material was cheap. I did them because I liked them . I have to pick projects carefully, because I have very little free time. And I'm not alone with that, I'm sure.
@stevethackery9853
@stevethackery9853 Жыл бұрын
Beautifully made. However, I can't agree with other commentators that it is running particularly "smoothly". It still quite frequently shows multiple 'gulps' before firing, which it wouldn't if the carburation and scavenging were just right. I'm puzzled by the way it doesn't do any 'misses' at all when running at maximum speed; it's almost as if there is some kind of load on the engine. Anyway, I repeat: it is beautifully made and finished.
@69MrSjani
@69MrSjani Жыл бұрын
Thank you for your comment! When the lever is in "high speed" mode, the hit and miss function is suspended.
@colinsalter3516
@colinsalter3516 5 жыл бұрын
Great workmanship.
@69MrSjani
@69MrSjani 5 жыл бұрын
Thank you Colin, I'm glad you like it!
@peterpereszlenyi
@peterpereszlenyi 7 ай бұрын
Simply beautiful!! What RAL color code is that green paint please ?
@69MrSjani
@69MrSjani 7 ай бұрын
I'm glad you like it! The paint is olive green, RAL 6003.
@peterpereszlenyi
@peterpereszlenyi 7 ай бұрын
@@69MrSjani thank you! It looks gorgeous
@M-S0704
@M-S0704 6 жыл бұрын
Very nice engine i making same engine...how long hold piston vacuum? And the piston reaches dead centre or not?
@Machine_NZ
@Machine_NZ 3 жыл бұрын
Sir, that is a stunning model. Beautifully made. A question: What colour green is that?. Regards Kevin
@69MrSjani
@69MrSjani 3 жыл бұрын
I'm glad you like it! The colour is olive green, RAL 6003. Regards Simon.
@koshyabraham1876
@koshyabraham1876 5 жыл бұрын
About *Karl Hit n Miss Engine* *I lke this Engine* From *where I can Buy* this *Engine, and its parts like Fuel Tank, ignition Coil* and *Pulley* Please inform
@69MrSjani
@69MrSjani 5 жыл бұрын
All the materials and parts are available from Bengs Modellbau: www.bengs-modellbau.de/materialbausaetze/verbrennungsmotoren/stationaermotor-karl-materialbausatz
@ronwhipple-ew3rf
@ronwhipple-ew3rf Жыл бұрын
I like this engine. 😊
@CHARLIE1955able
@CHARLIE1955able 3 жыл бұрын
I see the lord of the basement extraordinaire
@thra5herxb12s
@thra5herxb12s 4 жыл бұрын
Lovely little engine. Take off one of the govenor springs to get it running slower 👍
@Modelpilot
@Modelpilot Жыл бұрын
wow.. this runs and sounds sooooo nice 😍
@Modelpilot
@Modelpilot Жыл бұрын
Wow.😮. This is great… this is music 😊
@michaeldouglas3950
@michaeldouglas3950 5 жыл бұрын
That is a great build. Do you by chance sell these completed engines?
@69MrSjani
@69MrSjani 5 жыл бұрын
Sometimes I selling some engines when I need to finance a new project. I'll let you know when I planning to sell it.
@michaeldouglas3950
@michaeldouglas3950 5 жыл бұрын
@@69MrSjani great thanks.
@pauls5745
@pauls5745 3 жыл бұрын
lovely model!
@69MrSjani
@69MrSjani 3 жыл бұрын
I'm glad you like it!
@LawrenceOneil-im6kh
@LawrenceOneil-im6kh 7 ай бұрын
We’re can I get that motor
@Diesel8290
@Diesel8290 3 ай бұрын
Can these be purchased
@schnabberboy7377
@schnabberboy7377 5 жыл бұрын
Where did you find this version with that exhaust and water cooling? Or is it custom made?
@69MrSjani
@69MrSjani 5 жыл бұрын
It is custom made from the original kit, with Kurfurst water cooling system.
@anythingoldmechanical
@anythingoldmechanical 2 жыл бұрын
What about a drip oil feed for the cylinder? At the moment, there's NO lubrication getting there!
@69MrSjani
@69MrSjani 2 жыл бұрын
Hi, just design only, the piston does not need to be oiled.
@anythingoldmechanical
@anythingoldmechanical 2 жыл бұрын
@@69MrSjani all moving parts need lubrication.. especially the cylinder
@gangleweed
@gangleweed 3 жыл бұрын
Sigh....these jewels of engineering from an era that valued aesthetics with functionality are the very essence of steam punk in all it's brazen glory.......I just remembered that I have a plan to build one of these type engines completely from raw materials so I might just get off my butt from watching too much UTUBE and make one and use this video to embellish the design.
@69MrSjani
@69MrSjani 3 жыл бұрын
Thank you for your comment, I'm glad my video is the basis of your hit and miss engine project!
@trav6512
@trav6512 Жыл бұрын
Pure perfection
@69MrSjani
@69MrSjani Жыл бұрын
Thank you, I'm glad you like it!
@koshyabraham8010
@koshyabraham8010 5 жыл бұрын
How can I purchase *Karl* Hit n Miss *Model Engine* ? How much is its *Price* ? Please inform the *formalities* and Its *price* etc Of the *unit* and essencial *parts* and Also the *tools*
@laynewesley2548
@laynewesley2548 2 жыл бұрын
Awesome engine, is it available? Can you tell me where I can buy it?
@69MrSjani
@69MrSjani 2 жыл бұрын
I'm glad you like it, this engine is available here: www.bengs-modellbau.de/materialbausaetze/verbrennungsmotoren/
@LCMNUNES1962
@LCMNUNES1962 5 жыл бұрын
LINDA MÁQUINA MINIATURA DA VERDADEIRA, BRASIL OK.
@johnhine8725
@johnhine8725 3 жыл бұрын
was this difficult to machine and get running?
@69MrSjani
@69MrSjani 3 жыл бұрын
The description is pretty straightforward, and the milling is already done . It wasn't hard to do, and the Bengs modellbau website has a step-by-step building instruction in case you get stuck.
@johnhine8725
@johnhine8725 3 жыл бұрын
@@69MrSjani didn’t you have to bore the cylinder to tight tolerances?
@69MrSjani
@69MrSjani 3 жыл бұрын
The kit includes a pipe that is honed to exact size. You need to machine only the outside of pipe.
@69MrSjani
@69MrSjani 3 жыл бұрын
@@johnhine8725 www.bengs-modellbau.de/magazin/bauberichte/baubericht-4-takt-stationaermotor-verbrennungsmoto/
@johnhine8725
@johnhine8725 3 жыл бұрын
@@69MrSjani thank you
@user-vq7my9wi6c
@user-vq7my9wi6c 3 жыл бұрын
เอามาใช้งานได้หรือเปล่าครับ
@harrybobb6927
@harrybobb6927 5 жыл бұрын
Id like to get one if these but with a starting mechanism just like the lanz bulldog tractor engine did with using a shot gun shell to start it but i wanted one to use 22 cal blanks to start one
@69MrSjani
@69MrSjani 5 жыл бұрын
You need a Kurfurts flame eater engine, with a modified burner. The casting kit and all the materials are available at Bengs Modellbau, but you need a well equipped workshop to build it. And a lots of time.
@marvindebot3264
@marvindebot3264 3 жыл бұрын
The lowest power nail gun cartridge may be small enough but I'm not convinced. You only need a very small charge. Maybe a shotgun primer?
@davidfritschen8414
@davidfritschen8414 5 жыл бұрын
I am trying to get information on Isabel steam engine magazine article / build. Can you help me? Thanks. Dave
@69MrSjani
@69MrSjani 5 жыл бұрын
Hi Dave, here is the link for building the Isabel steam engine. www.bengs-modellbau.de/magazin/bauberichte/baubericht-ventilgesteuerte-dampfmaschine-isabel/
@ziplocBagofRobloxia
@ziplocBagofRobloxia Жыл бұрын
are these even really safe for indoor use?
@69MrSjani
@69MrSjani Жыл бұрын
If you like the smell of exhaust fumes, yes!
@xshahad97
@xshahad97 3 жыл бұрын
Where are these sold?
@Audace1400
@Audace1400 3 жыл бұрын
Very nice. Looks better than the Chinese ones.
@haukeunknow9670
@haukeunknow9670 4 жыл бұрын
What RAL Color is the green?
@69MrSjani
@69MrSjani 4 жыл бұрын
Olive green, 6003
@davidhill5621
@davidhill5621 Жыл бұрын
Sounds like a 12 hp kohler
@bambangirawan6011
@bambangirawan6011 4 жыл бұрын
Nice angine 👍
@69MrSjani
@69MrSjani 4 жыл бұрын
Thank you!
@heri.gmwmlgpradetiyo9525
@heri.gmwmlgpradetiyo9525 4 жыл бұрын
Wuih sangar lur diporting tambah oke
@sheharyarcheema3534
@sheharyarcheema3534 4 жыл бұрын
Very good
@koshyabraham8010
@koshyabraham8010 4 жыл бұрын
About *The Model Engines* When we are *eating Cadbery Chocolate*, we can understsnd *the taste and quality* of that, But there is *no meaning of explaining about its taste, without eating,* For that we have to taste it, Like that *Explaining and Showing* about the Model Engine , *is not enough*, People who want to Purchase it and to *Experience it*, should *have to get the opportunity, by buying it* Otherwise it is feeling only like *Unicon seeing in a Book*
@oldbatwit5102
@oldbatwit5102 3 жыл бұрын
Very nice
@69MrSjani
@69MrSjani 3 жыл бұрын
I'm glad you like it!
@stevepeterson19
@stevepeterson19 5 жыл бұрын
Very Nice
@bmkeste
@bmkeste 5 жыл бұрын
this is beautiful!! would you be willing to sell it?
@69MrSjani
@69MrSjani 5 жыл бұрын
I'm glad you like it! I will let you know when I going to sell it.
@Sebi076
@Sebi076 4 жыл бұрын
If they are selling this, where do i buy it?
@69MrSjani
@69MrSjani 4 жыл бұрын
Yes, they still selling this kit, raw materials, milled parts and electronics. You need a well equipped workshop for machining all the parts, and to assemble it. The kit is available at www.bengs-modellbau.de
@user-gx6di9dj9g
@user-gx6di9dj9g 3 жыл бұрын
@@69MrSjani 본제품구입코자하는데 방법좀알려주세요
@jaconeli88
@jaconeli88 4 жыл бұрын
There is a huge untapped market out there because you cant find completed engines like this anywhere and thousands of us want one. Come on you business men get some built and on the market and I will be your first customer.
@Steve-uq7np
@Steve-uq7np 5 жыл бұрын
Absolutely gorgeous, where can I get one. 😃😃😃👍👍👍
@jonathanPerez-nl3hl
@jonathanPerez-nl3hl 4 жыл бұрын
Kiero comprar uno ..a kien puedo contatar
@alanmumford8806
@alanmumford8806 4 жыл бұрын
It's a beautiful model, but is it capable of performing any useful everyday work? No, I'm not trolling. Can these small scale engines actually be used for any real-world purpose?
@69MrSjani
@69MrSjani 4 жыл бұрын
Unfortunately I can't answer your question. I never used it for real work, it just drove a generator and once drove my watchmakers lathe as well. ( the power of the electric motor is 0.2 kW ) Of course, it has quite a lot of power like any 15 cubic centimeter engine, but I wouldn't recommend using it for everyday work. I’m sure it wasn’t designed for that.
@CHARLIE1955able
@CHARLIE1955able 7 ай бұрын
We spoke years ago do you have any of your engines left for sale thank you
@JS-kd7jf
@JS-kd7jf 3 жыл бұрын
Love it!!!
@69MrSjani
@69MrSjani 3 жыл бұрын
I'm glad you like it!
@rustandoil
@rustandoil 5 жыл бұрын
Lovely 👍🏼👍🏼
@69MrSjani
@69MrSjani 5 жыл бұрын
Thank you!
@harpomarx7777
@harpomarx7777 4 жыл бұрын
What? Only two speeds? Next time, show us what it sounds like at 50% throttle.
@maxdavies9958
@maxdavies9958 4 жыл бұрын
It's a hit and miss engine, you can't really throttle them. You either fire every stroke or you let the governor choose when to fire.
@BarnacleButtock
@BarnacleButtock 3 жыл бұрын
2:22
@shootingsportstransparency7461
@shootingsportstransparency7461 3 жыл бұрын
Love it
@69MrSjani
@69MrSjani 3 жыл бұрын
I’m glad you like it!
@gdmsc
@gdmsc 4 жыл бұрын
where can bug this?
@tnjnbgfzftnjafvbkbzvjz9075
@tnjnbgfzftnjafvbkbzvjz9075 3 жыл бұрын
And you can send drawings, please. At least the engine. I will not copy it exactly, I will take it as a basis. (translated with translate.google.com)
@fredbush7924
@fredbush7924 4 жыл бұрын
What would you charge to build me one of these, or would you sell me this one?
@jagdishdilwariya6329
@jagdishdilwariya6329 4 жыл бұрын
I want to buy it.... I am from India My name is jagdish dilwariya
@josephdickerson5802
@josephdickerson5802 4 жыл бұрын
My name is cadoffi nabuiflish
@teolevan2541
@teolevan2541 4 жыл бұрын
MUA O ĐÂU
@koshyabraham8010
@koshyabraham8010 4 жыл бұрын
*69MrSjani* You are saying that *you are ready to sell this hit n miss model gas engine,* But you are not responding in the proper manner 😛😅 Please be more active , 😁😁
@sumitbarua910
@sumitbarua910 5 жыл бұрын
price pls if you sell!!
@deltatvss
@deltatvss 4 жыл бұрын
Sir I am buying
@69MrSjani
@69MrSjani 4 жыл бұрын
Me too, Sir.
@LCMNUNES1962
@LCMNUNES1962 5 жыл бұрын
BEALTIFUL PERFECT MACHINE, BRASIL OK.
@69MrSjani
@69MrSjani 5 жыл бұрын
Thank you for your comment, I'm glad you like it!
@deltatvss
@deltatvss 4 жыл бұрын
Get one peace
@LCMNUNES1962
@LCMNUNES1962 4 жыл бұрын
SHOW MACHINE , BRASIL OK.
1/2 scale Domestic side shaft Hit and Miss running model engine
11:24
This is a really cool miniature stationary Mill engine!
18:18
AJ Restorations
Рет қаралды 48 М.
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 13 МЛН
Can This Bubble Save My Life? 😱
00:55
Topper Guild
Рет қаралды 84 МЛН
Or is Harriet Quinn good? #cosplay#joker #Harriet Quinn
00:20
佐助与鸣人
Рет қаралды 4,6 МЛН
Yum 😋 cotton candy 🍭
00:18
Nadir Show
Рет қаралды 7 МЛН
Großer Flammenfresser Vogt VLW
3:06
W. Bengs
Рет қаралды 1 МЛН
B&W Semi Diesel Model Engine
4:21
Find Hansen
Рет қаралды 1,2 МЛН
Enjomor - Just Had To Have This Tiny Engine
16:10
carquestions
Рет қаралды 10 М.
4 Chinese Hit and Miss Engines reviewed  #hitandmiss #engines #modelengines
27:42
Lanz Bulldog stationary engine with generator (Flame eater)
9:07
Retrol HM-01 THE FINISHING TOUCHES
14:59
Rusty Relics
Рет қаралды 1,9 М.
Eachine ETX Vertical Hit & Miss Water Cooled Engine
12:32
Ronald Walters
Рет қаралды 94 М.
Driving A Steam Traction Engine Down The Road
33:13
Liam Griffiths Steam
Рет қаралды 1 МЛН
Hit & Miss Engines - The Correct Fuel
8:16
Ronald Walters
Рет қаралды 68 М.
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 13 МЛН