How to Engrave on Wine Glass with xTool M1 Laser (SHOWS HOW TO SET UP OF ROTARY TOOL)

Рет қаралды 32,852

Күн бұрын

Supplies Linked Here:
✔️ Rotary Attachment with Risers: amzn.to/3Ixncmk
✔️ xTool M1 10 W Laser (includes RA2 Pro): amzn.to/3WGPQFz
✔️ xTool M1 10 W Laser (includes RA2 Pro) directly from xTool: www.xtool.com/products/pre-or...
✔️ Wine Glass: www.dollartree.com/luminarc-s...
✔️ Tempera Paint: rstyle.me/+oszuD1bB4u8MyK3ID0...
✔️ Chalk Paint: www.143vinyl.com/starcraft-ch...
Chapters:
Intro: 00:00
Setting up Chuck: 01:41
Attaching Wine Glass: 09:29
Why do you need paint?: 11:39
What kind of paint?: 12:25
xTool Creative Space Setup: 15:36
Framing: 22:06
Laser Engraving: 23:58
Washing away paint: 25:20
Putting Rollers back on: 26:58
Additional Tutorial Mentioned in Video:
Great Explanation of how Diode Laser on Glass Works: • Learn How to Laser Eng...
Setting up Laser on Risers: • How to Engrave a Tumbl...
Shop My Cricut Faves Here: www.amazon.com/shop/karley.hall
Shop My Favorite Vinyl Here: www.143vinyl.com/starcraft-hd...
*use code KARLEY
Website: karleyhall.com/
KZfaq: kzfaq.info?su...
Instagram: / karley.hall
Facebook: / karleyhallcreative
Facebook Group: / cricutcraftswithkarley
Legal Disclaimers:
Affiliate Link Commission Disclaimer:
Some links above are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.
Use at Your Own Risk Disclaimer:
Karley Hall will not be liable to You or anyone else for any decision made or action taken in reliance on the information given by this video or for any consequential, special or similar damages, even if advised of the possibility of such damages.

Пікірлер: 47

@nvargas48 29 күн бұрын

More than helpful! I hadn’t touched my rotary tool although I’ve had it for a couple of months now, because I hate reading instructions and all the parts were intimidating 😂Thanks to you I put the whole thing together! I would love to see a video of acrylic engraving and cutting! I can’t get the right settings to cut!

@vondabrooks9467 Жыл бұрын

Absolutely great video. Thank you! Thank You! THANK YOU! Just what I was looking for.

@user-es2kg7ef7h 10 ай бұрын

Thank you very much for your video. It has been a great help to me to get started in wine glass engraving.

@leeannalexander4705 Жыл бұрын

Great video Karley! Hopefully this will give me the push to try my first wineglass 😉thanks for all you do

@makingmemoriescrafts8507 8 ай бұрын

I can't thank you enough! You did such a great job at explaining this entire process. I was so intimidated until I watched you. ❤️

@susanakuehne-molina3716 Жыл бұрын

Thank you very much. A very good video Karley! 😍😍😍

@dutchmeikuh8822 Жыл бұрын

Very helpfull in many ways, thank you so much

@lonewulph Жыл бұрын

This is a great video. Just ordered my M1 after months of research and of all the videos I watched, this was the most informative by far. Thank you!

@Wongster360 Жыл бұрын

Thank you for such a great and detailed video. It helped me get over the anxiety of setting up my RA2 Pro for the first time. I just finished my first set of wine glasses as an anniversary gift for my brother and they turned out awesome!

@hernz.gonz.2990 Жыл бұрын

thank you thank you very much for explain all this m1 tools. i am amiguina thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!! ❤❤❤❤❤❤❤❤💯💯💯💯

@GloriaAnnRodriguez90 8 ай бұрын

best tutorial I have found!!! Thank you!!

@KarleyHall 8 ай бұрын

Thank you!! My xtool series has been so fun to film! I hope to get back to it soon! 😅

@ginamariegarcia9461 6 ай бұрын

Thank you so much

@tiffaniwilson9133 8 ай бұрын

Thank you so much for your video! It was a huge help! I’ve been etching my glasses by hand the past year, along with so many other things and this tool leveled up my small business 🎉 *Question: I had the same l chalk paint on hand that you used. What I noticed is that it came off most of my glass but the area where the design was most intricate, it did not. I’ve scrubbed and can’t get it off. Any suggestions?

@janburden8370 7 ай бұрын

Thank you! Great video. Quick question - have you ever had burn marks or vertical dark marks after engraving?

@charleesoleil8510 2 ай бұрын

Excellent tutorial! I’m waiting for my M1 this week and I was wondering, would this painting technique work on acrylics?

@CthePHOTOG 5 ай бұрын

Great video. My only problem is when I'm framing the glass the chuck rotates the glass around twice and not in the area where the design is set to go. I have everything lined up and the design is in place. Do you, by chance, have a fix for this? Thanks.

@ThePapa1947 Жыл бұрын

Great video. I like the chuck facing out as well but you need to move the whole setup to the other end. The drive gear is on the wrong side to just turn the chuck the other way. I wish you did not have to do that.

@gemmad1990 8 ай бұрын

This is amazing thank you! I have some square glass jugs- do you think this is something that I could engrave with the M1- would the rotary tool be required? Thank you

@jillcastillo7057 Жыл бұрын

Thank you for this! Do I need a rotary to with the support thing for wine glasses? or can I just somehow prop the glass in there to that it is levelled and stable? THANK YOU :)

@KarleyHall Жыл бұрын

As long as it stays even when it rotates- you’re good to go! When you frame it- you should be able to tell if it’s shifting.

@vondabrooks9467 Жыл бұрын

Don't now if this would be helpful to you or not; but I got the same cracking around the edges you were speaking of (not as clean a cut)with the settings you used, so I played around with the settings a bit and made an adjustment in the speed (slowed to 73) and the Lines per cm - changed to 200 (tried 140 - was ok, 180 - a little better). Give it a try. Hope it helps.

@KarleyHall Жыл бұрын

Ooh! Thank you so much for the comment! I could not figure out any settings that were crack free- even with a test grid! I cannot wait to try these. I’ll definitely report back! Thanks again! 🥰

@stevejones01 11 ай бұрын

The thing on the left side that supports the glass is called a "tail stock" and the tiny little screws are called "set screws".

@KarleyHall 11 ай бұрын

Thanks!! 🙌🏼

@lisamariedesignboutique Жыл бұрын

I’ve had my RA2 pro for months now but finally took it out of the box watching your video was extremely helpful, thank you so much! 🤍

@Manukapu 5 ай бұрын

I notice that you XCS has measurements IN and not MM. How did you convert?

@Shefroniabrooks 2 ай бұрын

Did you figure this out?

@mightyminisuk4295 11 ай бұрын

hey so i see a problem, if you turn the chuck part round the opposite way to do things with a handle, then how does the belt go on as its then in the wrong place?

@fabiolarichards4506 7 ай бұрын

Will any chalk paint work?

@juliel6253 Жыл бұрын

Hello, Karley. My sister and I are considering a tool such as this. I would be most grateful if you could tell me the difference between the xTool and a Glowforge. We're just not sure which way to go. Cost is not a major concern. TIA

@KarleyHall Жыл бұрын

The glowforge is a CO2 laser and the xtool is a diode laser. Diode lasers are much less powerful and cannot cut through light colors since the light is reflected. I would recommend a glowforge if cost isn’t an issue with the caveat that it cannot engrave cylindrical objects like cups! What are you looking to use your laser for? They both have so many benefits so it really just depends on what you want to use it for!