Kawasaki Mule SX ● Install Winch (WARN AXON 35-S Synthetic Rope)

Рет қаралды 3,882

11 ай бұрын

I installed this WARN AXON 35-S Winch with synthetic rope on my Kawasaki Mule SX. I hope this can help you install your own on your Mule as well!
✅ Watch the Video ✅ Do it Yourself ✅ Save Money!
✅ Buy the Tools and Parts you need here:
WARN AXION 35-S Winch - amzn.to/47Bn1QP
Kawasaki/WARN Mounting Plate - amzn.to/47xhn2e
6-Way Fuse Box - amzn.to/3YuOEa2
100amp Circuit Breaker - amzn.to/451jHN7
Relay Switch - amzn.to/3YwHDpf
Push Pin Pliers - amzn.to/3YKNPdD
Fastener Removal Tools - amzn.to/3OtJQNO
Fender Plugs - amzn.to/3OQEVaX
As an Amazon Associate, I earn a commission from qualifying purchases at no cost to you. Amazon links are often provided in the video descriptions and comments on this channel.

Пікірлер: 7

@PatrickMcnamee-zg8ge 10 ай бұрын

Watching you struggle with putting the mount and winch together from the bottom with ratchet wrenches and small turns made me think the Kawasaki engineers couldn't have been that cruel. I removed the differential bracket, put the whole thing together on the floor (both plates, bracket and winch. I then dropped the whole assembly in there, put the pin through and installed the 4 front bolts. Voila! Actually it was probably the easiest part of the install. Whatever mechanic put the floor trough screws in mine had his drill torqued way too high. It took me nearly an hour to get them out, one simply didn't come out. I wired the dash plug/ remote harness by tapping into the lighter plug. Your video gave me the knowledge I needed to get going, thanks.

@ApacheRanch 10 ай бұрын

Great job! I hope your comment helps someone else do this better!

@EnoRestoration 11 ай бұрын

Great addition to an already great rig!

@G4FAMOUS 6 ай бұрын

What is the best tool for removing the plastic pieces that hold on the hood?

@ApacheRanch 6 ай бұрын

Push pin pliers - amzn.to/3YKNPdD

@kevintatum16 11 ай бұрын

where did you hook up the red wire from the switch? you said in the fuse box. Im at that stage as we speak!

@ApacheRanch 11 ай бұрын

Yes - that little red wire needs to be connected to a power source that is enabled/disabled by the key. In my case I used my fuse box (that I added). That fuse box is activated by the wiring behind the cigarette lighter plug. The wiring behind the cigarette lighter is easy to tap into without cutting any wires. See my fuse box install video to see what I used to connect to that.