Kawasaki Z1 Super six clutch and a weekend at Goodwood revival

Рет қаралды 175,377

Күн бұрын

In this video I have a look at the clutch on my red kawasaki super six. Now that the bike has done over 1000 miles ive been exploring there power a bit and noticed that the clutch would slip slightly when the power came in in top gear. After replacing the clutch plates and fitting HD springs. I then take it out for a 50 mile ride to test the clutch and it now works just perfect. Ive been really busy lately with work and events so when I was invited to attend the Goodwood Revival I thought I would be nice my experience at Goodwood in this video to show a flavour of the event. Tracey cooks some more cherry cupcakes and a few of the wild life regulars also make an appearance. Thanks to my son Sam for the on bike footage of our impromptu lap of the track at Goodwood filmed on his phone one handed while hanging on to the pillion seat of my five litre Flying Millyard V Twin, please excuse the bit of wind noise, we didn't have my GoPro with us, but it shows the flow of the circuit a bit. I hope you enjoy this video
best regards
Allen Millyard

Пікірлер: 954

@Jj12915 2 жыл бұрын

Allen Millyard, Fred Dibnah and Guy Martin. All brilliant, humble and great entertainers. The best the UK has to offer!

@MrWhothefoxthat Жыл бұрын

don't forget FRANK and Bettie, mmmm.

@stephenrice4554 11 ай бұрын

No question

@user-jb7so4tu2y 6 ай бұрын

Don't forget Sam Lovegrove

@dukiemoto8676 2 жыл бұрын

Humble engineering genius, artist, funny man, cupcake lover and absolutely humanity’s gold👍🏼 you’re the best Sir

@tvdinner325 2 жыл бұрын

At least leave the turn-signal on for miles, like a true man of your age! (It makes the rest of us backyard mechanics feel better.)

@jahanggirhossen3297 2 жыл бұрын

@@tvdinner325 c

@larsfrandsen2501 2 жыл бұрын

Yup!

@HainjeDAF 2 жыл бұрын

Just love the combo of modesty about huge modifications and cupcakes.

@Boppa1260 2 жыл бұрын

Cup cakes and motorcycles, two of my favourite things.thank you Allen

@kcraig51 2 жыл бұрын

"The only man in the world that can cut a straight line with a hacksaw." No truer words ever spoken. By the way, what's the redline on the Flying Millyard? 250 RPM??

@AllenMillyard 2 жыл бұрын

Around 2200 rpm

@zorktxandnand3774 2 жыл бұрын

@@AllenMillyard At the very low RPM's you were driving over the circuit it sounded more like a steam engine. sounds almost impossible for a petrol engine, not stalling. Very cool.

@timmason7430 2 жыл бұрын

@@zorktxandnand3774 At 5Ltr's I doubt it _would_ stall(loads of torque).

@zorktxandnand3774 2 жыл бұрын

@@timmason7430 And loads of rotating mass, but it just sounds so unlike any normal petrol engine revving that low.

@snapon666 2 жыл бұрын

@@AllenMillyard instead of a tach I see you have a clock ...the bike turns so slow you time the revs with the minute hand

@TomChame 2 жыл бұрын

The Flying Millyard makes the world a better place. Thank you.

@Prashantlunawat 2 жыл бұрын

How?

@Red-kite617 2 жыл бұрын

I will second that.

@MrPotatochips4 2 жыл бұрын

@@Prashantlunawat How? By the beauty of it, and even more by expanding the concept of what beauty is, and more, by expanding the mind beyond what was once thought possible. Further, it takes droll humour further into the realm material existence, thus sitting philosophy back in the saddle where Robert Persig rightly put it with his book, "Zen and the Art of Motorcycle Maintenance"

@Prashantlunawat 2 жыл бұрын

@@MrPotatochips4 it makes the motorcycling world a better place. Not necessarily the whole world. I'm a motorcyclist myself and get the enthusiasm but making generalised statements romanticizing motorcycling doesn't seem to work well. I mean, yeah it sounds grandiose and all that, whatever floats your boat man

@tauncfester3022 2 жыл бұрын

I think Allen said it was his Chitty Chitty, Bang bang bike, I have to say it's an evocative sounding motor. I like old sounding bikes, even though I don't own any.

@ericgabriel4190 2 жыл бұрын

Motorcycle maintenance, baking tips, and a call from Greta all in one place. It doesn't get any better than a Millyard video!

@billgardiner9305 2 жыл бұрын

Allen , great video as per usual. I remember learning the hard way in the early 70's that North America,n issue Phillips screwdrivers should NOT be used on J.I.S. screws used on Japanese motorcycles. Glad you mentioned JIS and the heads of those screws look as pristine as pristine could be ! Allen thanks for all you do !! 65 year old lifelong motorcyclist / auto mechanic here in Coldwater Ontario Canada enjoying yet another fantastic Millyard video. Cheers !!

@Bellathebear777 2 жыл бұрын

Ditto!

@gwstubbs7046 2 жыл бұрын

Ditto as well from Alberta.

@ChristianRB89 2 жыл бұрын

Allen: “Lets just gradually turn the Channel into a baking Channel. The fans wont even feel the transition”

@bernibeckmann9753 2 жыл бұрын

That's how they dominated the world for a while. We're just here to say hello.

@dizheller2101 2 жыл бұрын

How about "Bikes and Cupcakes" ;-))

@davidshields948 2 жыл бұрын

Can't wait for the spinoff! "Tracey's strictly cupcakes" Can yo imagine the merchandise!?

@ai-d2121 2 жыл бұрын

Title suggestion: Sugar and Bikes: How Allen drops a screw in the block when Tracy calls “ cup cake”.

@AussieMaleTuber 2 жыл бұрын

Reminds me of a line from the Kawi movie 'Stone' 1974: "when you bake a cupcake man, when you bake a cupcake hard and fast... it's like nothing else really matters!"

@garyhardman8369 2 жыл бұрын

For me, this channel is a veritable jewel in the crown of KZfaq!

@emogowl 5 ай бұрын

I have to agree with your loyal viewers, your channel is an absolute jewel, a real pleasure. I really do miss my motorcycling days, 30 or so years, many of them with bikes as my only transport. Camping gear, a decent bike and the open road, especially back in the days when Brit tourists still waved at each other on much emptier roads. Anyone remember the dear old Triumph Tiger 650, the original with one super-easy to tune carb? Or the wonderful ferry from Algeciras to North Africa and that gorgeous road south through what was then the Spanish Sahara? Happy Days ...

@savage22bolt32 2 жыл бұрын

14:50 "The only man who can cut a straight line with a hack saw - in the world! Absolute genius!" This needs to be on a Tee shirt.

@mrsmith4662 2 жыл бұрын

I love this show. You just couldn't get a more contrasting mix (of things we're interested in) of motorcycle engineering, love of bikes, love of cup cakes and wildlife in our gardens. A unique combination. Great stuff.

@victorpelini5995 2 жыл бұрын

14:54 just sums it up entirely, mans just cuts up engines in half and weld' em together like it's nuthin Are we also talking about the crankshaft straightenin' by hand/eye and its within a thou...

@timothywicks3822 2 жыл бұрын

Had the pleasure of meeting Allen at the national motorcycle museum last Sunday lovely to chat to a real gentleman

@graydonstuckey8190 2 жыл бұрын

HI Allen, I made your wife's cupcake recipe a couple weeks ago. They didn't turn out but I tried it again today with a couple slight modifications and they turned out great! My son said these are the best dessert he's had in weeks! Thank you for actually posting a shot of the recipe.

@nickhellen6303 2 жыл бұрын

Aha. Two consummate professionals at work. The “Cupcake Queen” and the “King of Engineering “. Gotta say, that was a nifty trick the way Tracey weighed the flour. Give her her own 5 minute segment on each show, You’ll both become even more famous! Great to see you back.

@dilwyn1 2 жыл бұрын

Great vid Allen. So glad you emphasized the use of a "JIS" screw driver. I have spent too many hours removing mashed up screws after they have been attacked by a Phillips, or Pozi drive head!!

@handycrowd 2 жыл бұрын

It's amazing how few folks know about the JIS screwdrivers and how difficult they are to find (out of Japan), especially when you think how many Japanese vehicles there are around... :-)

@andya857 2 жыл бұрын

Me too,just ordered 6 hex bits, made in Japan from Amazon, only 25 dollars ..

@paulreynolds9003 11 ай бұрын

Probably one of the few bike builders that builds bikes for the pure enjoyment of it. Always a pleasure to watch your videos. Can we have a new build please.

@potskifilms 2 жыл бұрын

What a treat for the ears; Allen's Super SIX and the Merlin flypast!

@Banditmanuk 2 жыл бұрын

The Z1 Super six sounds just amazing higher up the rev range. Love to see an Allen Millyard vid notification. 👍👍👍 Haha, no electric vehicles

@howder1951 2 жыл бұрын

Another astonishing day in the life of Allen, I suppose his mouth was watering as much as mine when the second rasher of cherries went into the cupcakes. Enjoyed, cheers and good health to you and your family Allen!

@neilcowan535 2 жыл бұрын

I'm sorry to be pedantic, but for the good of mankind I feel the need to point out that, however tasty they may be, cherries definitely do not come in rashers!

@trebor9711 2 жыл бұрын

BEAUTIFUL BIKE I REMEMBER THEM FROM THE 70'S

@kwameboxa567 Жыл бұрын

l love those "gentle digs' at Greta, excellent comedic timing 😀

@jrand2631 2 жыл бұрын

Really great to see the Flying Millyard in action - what a beast - and then even having a big movie star, like Jason Momoa sitting on it. He should be honored to be granted such a privilege.

@jamescroft4298 2 жыл бұрын

The FM trumps the V-twins Jason rides :)

@davidellis2021 2 жыл бұрын

Thank you Allen. For those of us Brits who don't currently live in Blighty these videos are fabulous to watch.

@patrickrose1221 2 жыл бұрын

You know you're always welcome pal : )

@rockypup1968 2 жыл бұрын

I bet there's Kawasaki designers from the 70's watching this and thinking .... " this man's a flippin genius !!

@stephenrice4554 11 ай бұрын

That Kawasaki sounds well , cakes , where would we be without cakes ? Good wood , one day I'll get dressed up and get there to appreciate the machinery and the atmosphere 👍🇬🇧

@ThePeterfrancon 2 жыл бұрын

Never mind your brilliant engineering Allen, I love the trick Tracey uses to measure the flour for her cup cakes! I'll be using that for my next bake!

@keithallen4389 2 жыл бұрын

Loved the video. Fettling the Kawasaki and mentioning JIS screws! Cupcakes, cherries, doves, English country lanes, the amazing Flying Millyard, a glimpse of the fun at Goodwood that I’ve never seen before, especially period costumes, a lap of the circuit, trouble with the law, baby birds and hedgehogs. What a pleasure, Allen. Thank you so much.

@doublenickel1000 2 жыл бұрын

Great synopsis, Keith! What's not to like of all that?!

@boshraahmad4626 2 жыл бұрын

Am so humbled to follow the person when we have the same name 🙏🙏

@thewatcher5271 Жыл бұрын

I'm The Beatles Age & Watching Your Videos, Gives Me Hope That I'll Get To Ride Again One Day, Thank You.

@yashaswisharma9064 2 жыл бұрын

Motorcycles and cupcakes, that's a match made in heaven.

@ianmangham4570 2 жыл бұрын

Big wood pigeons are so funny to watch waddling in the yard, especially after Wallace and Grommet when grommet is spying and the bird with the rubber glove on the head stares at him 😅🇬🇧👍

@paulg3336 2 жыл бұрын

Feathers McGraw ,who is a penguin

@ianmangham4570 2 жыл бұрын

@@paulg3336 Yup, great penguin 🐧always reminded me of a wood pigeon, must have been the Stardawg 🚭

@arjunab6167 2 жыл бұрын

The only guy who cuts a straight line with a hacksaw, that's what amazed the most among your skills. 😊👍

@davidmccausland9063 2 жыл бұрын

Another really interesting and inspiring video.... agreed with the bloke regarding the hacksaw cuts 🤣🤣🤣🤣🤣

@nodrog777 2 жыл бұрын

A glimpse into the world of Mr Millyard, where engineering and cupcakes clash and whir to make a mix of pure poetry.

@adunski 2 жыл бұрын

Allen taught me how to persevere! Zen master!

@willjones7132 2 жыл бұрын

Always great! These videos help with keeping up on long term projects, thanks for posting your work, plus the fun and opportunities your creations bring to you.

@timhicks2154 Жыл бұрын

Even the local wildlife is mesmerised by your spannering. As are we all.

@paulcraig3661 2 жыл бұрын

Alan getting his helmet kissed by Tracey - sounds like a good day out 😅

@reglockyer9234 2 жыл бұрын

i hope he wiped the lipstick off before he got home!😉

@ksouster6839 2 жыл бұрын

Excellent, I realised that as yet I haven’t seen you use a power screwdriver/impact gun or the like. Proper hand tools 👍

@patrickrose1221 2 жыл бұрын

"Here Hear " : )

@ttburn6338 2 жыл бұрын

I`ve been waiting soooo hard for your next video, Allen! You made my day!

@K1lostream 2 жыл бұрын

Oh! Getting invited to Goodwood Revival! You big-time now! Hats-off to Greta's informants - she can track you down wherever you are!

@iancharlton678 2 жыл бұрын

Another slice of loveliness, with added cupcakes 🧁🧁🧁😎🇬🇧 Thank you as always…… 🌟

@ruaraidhmcdonald-walker9524 2 жыл бұрын

Woop!! Great to see this again!! Love the look, the sound and the fact that it was the first Allen vlog series I watched, introducing me to this ace channel!! Hope you had a great Summer Allen! Ready for a shed based Winter of more amazing work?

@randylucas2458 2 жыл бұрын

I love your show it has a grand variety and excellently narrated. as an engineer who enjoys motorcycles as well as cooking and wild life, I find your show hits all the marks. I look forward to the next one, thank you.

@shifatahmed4875 2 жыл бұрын

Tea cupcakes and bikes on a winter day are my favourite My respect stays with you sir

@jamespicking1140 2 жыл бұрын

Allen, you remind me of my dad so much. My dad was an aviation engineer and project planner and I lost him in march 2020 age 81, I have inherited the workshop and have an overhead milling machine, Oxford student lathe, boxford shaping machine, hydraulic hacksaw and I just want to do my dad proud and learn how to use this machinery properly. I know you're familiar with Steve parish and Im guessing you know Tony malthouse who taught me a lot as he lives locally to me also. It's a shame he has retired now. I want to learn the old skills to keep them alive into the future, maybe o can teach this to the next generation also.

@alextripp1230 2 жыл бұрын

Hi Allen, over the moon to see you utilise your "grass" workbench again with the pigeons as company. That Kawasaki just looks and sounds gorgeous. Goodwood looked fab as usual, the Spitfires amazing, good to see the Flying Millyard attracting lots of attention. Hope the cupcakes tasted as good as they looked by the way, Mrs M is a cupcake wizard. Great video, cheers, Alex.

@shuggyboy1 2 жыл бұрын

thanks for the videos Allen, keep them coming, love it. :-)

@davidsimpson105dB Жыл бұрын

The best of English ingenuity ! Along with all our other innovations...makes you proud to be an Englishman.

@stevemull2002 2 жыл бұрын

Nature and Cookery lessons, and a bit about Motorbikes, brilliant stuff, and just like all your other vids, Allen 100% entertaining, please dont ever change the format

@stephenthompson6049 2 жыл бұрын

What a marvellous witty man, the cupcake commentary had me in stitches, the Kwak sounds epic

@stevemarr9295 2 жыл бұрын

I was interested to see you putting in the new fibre clutch plates dry - I'd always soaked them in new oil first, otherwise suffered grabby/sticky clutch initially. Those twisty B roads look great fun (once dry). Excellent stuff as always.

@vk2aafhamradio 2 жыл бұрын

Clutch discs wouldn't dare misbehave for Allen Millyard. They know better.

@patrickrose1221 2 жыл бұрын

The wettest part always on the bends for a change lol ! I have nightmares about cattle grids meself pmsl : )

@robertwoodliff2536 2 жыл бұрын

@@patrickrose1221........those bits of corners, where the road polishes under corner loads........always good when it's mixed with a nicely warn man hole cover.

@patrickrose1221 2 жыл бұрын

@@robertwoodliff2536 aaah! Happy graze erm I mean days lol : )

@vicamaral 2 жыл бұрын

should soak fibre plates with oil over night and bead blast the steal plates better then sanding,great videos has always.

@seanhazlewood634 Жыл бұрын

Allen I love your videos always thoroughly entertaining and informative, I used to ride bikes in the 70-80 and the selection of bike’s engines I’m now into boats outboards but still have a effection for the classic bikes you work on. My wife is similar to yours crocheting and baking happy days thanks for all your contribution

@motoboq9606 2 жыл бұрын

"The only man who can cut a straight line with a hacksaw in the world". he is about right you know hahaha i do allot of engine work and bike projects but i dont imagine my self cutting the cuts you do and stay straight :O impressive ! great content love the videos

@JagLite 2 жыл бұрын

Wonderful! Your hat was perfect for the Revival, and the Flyer must have been a hit at the show.

@iainmarshall2514 2 жыл бұрын

Just watching the last bit with you riding the Flying Millyard round the track had me thinking its the two wheel version of Duncan Pittaway's Beast of Turin , just the lazy revs but making good progress. Tea,cupcakes and engines a great recipe...

@patrickrose1221 2 жыл бұрын

Nailed it , I saw that ' Beast ' for the first time last week , deffo earns it's name don't it pal : )

@paulm749 2 жыл бұрын

Again, this is the best baking channel on KZfaq - it's all in the details!

@HLife719 2 жыл бұрын

I innocently tuned into the video to see the clutch overhaul, only to be confronted with the artistic creation of luscious cupcakes. Two expert craftspeople in one household! I‘m now dealing with a massiv case of the munchies and all the shops are closed.

@Wingnut_Stickman 2 жыл бұрын

The "Flying Millyard" has a decidedly helicopter sound when chugging along. Does that mean it is technically a chopper? Great video, I missed ya! Thanks for sharing.

@robertwoodliff2536 2 жыл бұрын

...............six foot long folks, and a king and queen seat, full low rider............it would be a blast.

@motorcyclemike8555 2 жыл бұрын

Mmmmmm Vintage motorcycle tutorial and cupcakes, brilliant!

@Betsy387 2 жыл бұрын

Absolute pleasure on a Sunday morning to sit and watch your video

@racingrooster4642 2 жыл бұрын

Great video, Motorbikes ,cooking ,wildlife, fashion. The dig at Gretta was very funny.

@jnault6441 2 жыл бұрын

The Kawasaki driving footage and that exhaust note...bellissima!

@waynebuzzell2483 2 жыл бұрын

Beautiful Super 6 and beautiful event.

@als4621 Жыл бұрын

Cannot find words to describe how much I enjoy your videos!! Thanks again Allen!

@chrisrhodes2595 2 жыл бұрын

I never get tired of watching this mechanical genius at work

@trevorg2349 2 жыл бұрын

I love it when motorcycle-bob-ross uploads a video!

@TheDaf95xf Жыл бұрын

I don’t know who’s better to watch Tracy making cup cakes or you tinkling about with motorcycles engines lol 😆 I had a Kawasaki Z 750 back in the 80s and loved it 😍

@colindowd3892 Жыл бұрын

The sound on that super six sound just like my Honda Rune. Fabulous 👌

@geoffreyjones2000 2 жыл бұрын

Thank you, sir ... big smile from Maryland, USA

@tomtruesdale6901 2 жыл бұрын

What a wonderful video Sir, working on your Kawasaki, making and eating cupcakes (yum) and enjoying a weekend with a bunch of motorheads. Thank you for sharing it with us.

@MacPoop Жыл бұрын

I still can't get over the 6cyl sound this particular engine makes, between the custom made engine & exhaust. It's even better than the really early flat 6 Goldwings with all the fairings, panels and covers off. Starting right at 4,000rpm on this "Millyard Kawasaki" I could listen to that all day! Has a yell to it that reminds me of a high revving Ford 289 coming into the cam

@ryancraig2795 2 жыл бұрын

Wow! 4k HDR, sweet. Everything looks great! I can appreciate the beauty of your work all the better.

@jimclements3190 2 жыл бұрын

Flying Millyard sounds unbelievable through my headphones Allen, thank you for the video, it was brilliant as usual 👍🏁

@ericm8811 2 жыл бұрын

Hey Allen Millyard! Greetings from Vancouver British Columbia Canada! Cherries in the cupcakes is like more cylinders in the engine! Its always better with more! Ride ride ride!

@ChrisPinCornwall 2 жыл бұрын

Just perfect. As always, thank you so much.

@the_forbinproject2777 2 жыл бұрын

another brillaint video that made my Friday evening perfect, many thanks

@markhensley9378 2 жыл бұрын

I really enjoy all the video content on your channel. It's rare to be able to see the building of such a unique engine. Thanks again for your time and videos. Have yourself a great weekend!

@jimmeyer9075 2 жыл бұрын

Thanks for taking us on the ride. Incredible machine.

@r1richie 2 жыл бұрын

The only channel on KZfaq Where you get motorbikes cookery and nature

@phlashtheband4939 2 жыл бұрын

You my friend are one of a kind. Awesome thoughts and builds! I would love to have a bike like this! As fast as my early 70s Z1 was I can't imagine what a thrill your Z1B would be. Hats off to you.

@100bollocks 2 жыл бұрын

Great video Alan , love what you do with bikes, you are a creational genius

@syby1112 2 жыл бұрын

Kawasaki 's and cupcakes, the sunny side of heaven.

@arjunab6167 2 жыл бұрын

Was smiling through the whole video. Thanks Allen.

@benjaminholt4292 2 жыл бұрын

Thank you for taking us along on your big adventure Allen!

@matmiller5256 2 жыл бұрын

Beautiful ! Thanks for uploading. Appreciated.

@raltevanlalhruaia3126 2 жыл бұрын

Everything in your video is just so cool . 👍👍👍

@WorivpuqloDMogh 2 жыл бұрын

This is absolutely gold

@kennymcg 2 жыл бұрын

A pleasure to watch yet again. 👍👍

@liecht 2 жыл бұрын

This beast of a machine is full of grace,beauty and poetry...great country driving and as always a deep positive message

@michaelbrookover8018 2 жыл бұрын

Well what do you do when there’s not a new video you watch one again! So soothing and relaxing to watch Allen work. Look forward to these videos like a warm muffin and a cup of coffee! Cheers to all, Mike Ohio USA

@AllenMillyard 2 жыл бұрын

Sorry I’m keeping you waiting, I’m making a new vid soon 🎥

@bitzaboat 2 жыл бұрын

Every video makes me smile. Pure genius 👏

@johnmccarthy5132 2 жыл бұрын

Amazing to watch! Allen makes creating 12 cylinder motors look easy. And, I love the detours to Tracey's kitchen and visits to the hedgehogs! I hope Tracey keeps adding extra cherries to your cupcakes!! Thanks for this uplifting entertainment!