Gday everyone welcome back, this time we dive a bit deeper into getting the green machine up and running properly. Unfortunately this doesnt go to plan at all.
Пікірлер: 40
@jimw791610 ай бұрын
Its So pleasant to hear someone using the proper term "gudgeon pins". For some reason no one uses that term anymore.
@HarpersShed10 ай бұрын
Thanks mate, I do try to use correct terminology for things where I can. It's difficult sometimes as different parts of the world have different terms for things too. My pet hate is "cotter pins". In Australia they are split pins lol 😂
@jimw791610 ай бұрын
@@HarpersShed haha yeh ....you know what erks me the WORST? ......... pommies calling motor scooters "MOPEDS"......... Im sure you know what an actual "moped" is so I wont explain it.
@HarpersShed10 ай бұрын
@@jimw7916 yeah I know exactly what you mean mate 👍.
@donovanwilliams1282 ай бұрын
enjoying the content
@HarpersShedАй бұрын
Thanks mate
@ArthurMongrel10 ай бұрын
Loving this mate. I just got myself a 95 zxr250 and am an episode behind you in terms or progress. Stripping down mine now and cleaning everything up before trying to get her running. Keen for ep 3! Keep it up 👍🏻
@HarpersShed10 ай бұрын
Nice one mate, good to hear that another zxr will be saved and put back on the road. I'm in the process of sorting parts now so it may be a few weeks till the next zxr episode unfortunately. I will be doing my best to get it happy as quick as possible though.
@scottsorby796610 ай бұрын
That's a bummer about breaking the engine down Tim, but on the bright side you now know the engine will be strong enough for the fun times ahead be safe mate, see you next week
@HarpersShed10 ай бұрын
It's a bitter sweet sort of deal. Sux I had to do it but as you said it means I can build it up better to handle the abuse it will get once on the road.
@nobbybennett57510 ай бұрын
Top bloke Tim, Great vids keep em coming.
@HarpersShed10 ай бұрын
I will do my best to get them up on a more regular basis
@garyashdown537610 ай бұрын
I know its probably to late but on number 4 piston slip the rings off and measure the ring gap in the bore and see if the ring gap is in spec, that will give you an idea of the bore condition. As the bores them selves look shiny and that you can smell petrol in the oil im wondering if the bores have been damaged because of to much fuel in the past, hence the sooty plugs ar the beginning. As you will probably know to much fuel will damage the bores and rings. With the mileage and from what i saw id be inclined to rebore the engine and also check the carbs out as someone might of upjetted them to high and to finish off by balancing the carbs for smoother running and response. This is taking me back many years for when i worked on my zxr750 h1 which i found some photos of the other day and our bikes could have been twins from 50 yards 😅. Its a shame i cant send you a pic so you could see. Anyway cracking post as alway young man. Gary 🇬🇧 🇬🇧
@HarpersShed10 ай бұрын
Thanks mate, I didn't actually check the ring gaps in the bore yet. I have a suspicion that the bores are just glazed up and also worn out from fuel contamination and just the life it's had. Also I don't really have any choice to just hone and ring it as I can't seem to find any oversized pistons for it at all.
@garyashdown537610 ай бұрын
@@HarpersShed there is a company in the US that supply a 2mm over size kit for the 2008 on zxr 250 which happens to have the same size bore and stroke as you're engine but not cheap 744.80 Australian Dollars. For now I'd go with you, new rings and hone it but definitely balance the cabs.
@HarpersShed10 ай бұрын
@@garyashdown5376 yeah that's a lot of coin. I would be interested to see the gudgeon pin height and size for the ones you mentioned. What company supplies them?
@garyashdown537610 ай бұрын
@@HarpersShed forget it, my fault after checking it's a two cylinder engine same name different market good old Kawasaki but you're not a very common bike outside you're neck of the woods. Sorry to get your hopes up but I'll keep an eye out for you.
@HarpersShed10 ай бұрын
All good thanks for letting me know though mate I appreciate it 👍
@djmini2numpty14110 ай бұрын
if you ever move onto a NBC 110 postie, holler, love to see you working on that... reason being, not to many videos out there explain how or why they do things like you do. Frank, catchya first week in december hopefully
@HarpersShed10 ай бұрын
Thanks Frank, I have worked on a few 110 postie bikes and owned one for a while. I found them to be bloody horrible bikes for anything but riding slowly and delivering the mail 😂
@nevsmate866310 ай бұрын
dunno what Kawasaki parts prices are like... but I run a 1981 GL1100 & 1997 Valkyrie & parts (even used) are horrendous! Looking forward to all your builds... ;-)
@HarpersShed10 ай бұрын
I have found Kawasaki to be reasonable with prices over here. The 2nd hand market is another thing though. Sometimes you can pick up a bargain but mostly people want silly money for crap parts.
@kevinfisher107010 ай бұрын
Bike sounded mean really gonna be mean when you get it back together
@HarpersShed10 ай бұрын
Thanks mate, they sound like a mini moto GP bike when running properly 👍
@valknirthegreatest7 ай бұрын
i've been wanting one of these for ages, sadly not many around in EU
@HarpersShed7 ай бұрын
I do believe they are very rare over there
@moosenbeans90310 ай бұрын
Look at that Itty bitty motor that's cute.
@HarpersShed10 ай бұрын
Lol yeah that's a very good way to describe it mate 👍
@mattmorley211010 ай бұрын
Another great vid brother 👌 always informative 👍
@HarpersShed10 ай бұрын
Thanks mate glad you enjoyed it👍
@BALO.Marine10 ай бұрын
Another great video, mate. I have no idea how you have time for both channels or all the projects you have going at once... maybe it's time to bring in an assistant 😂😂
@HarpersShed10 ай бұрын
Thanks mate, let's say that I don't have a great deal of "spare" time. I hate sitting still so if I have nothing going on then I go out to the shed and get some work done. I have a whiteboard at my desk that I use to plan out all my projects and time frames for videos for each channel. I have only just started using the whiteboard but so far I'm finding it very helpful for keeping me on track 👍
@Scuba_Ste3 ай бұрын
I have the same bike here in Ireland. Im doing the same project, any idea where to get a workshop manual from 😅?
@HarpersShed3 ай бұрын
They are available online but I haven't managed to find a free download unfortunately
@Harleyy_4912 күн бұрын
Haha me to also looking I'll try post a link when I find one,
@grantpeachey690810 ай бұрын
I am the one thumbs down i am only interested in you boat not all the other
@HarpersShed10 ай бұрын
Hi mate, some time ago I actually split the channel into two. This channel is for all my other projects. If you search Harper's boat shed you will find the 2nd channel that is 100% boat and boating related content. Hope this helps and if you feel like undoing the thumbs down it would help me out but that is up to you. Cheers and hope to see you on the other channel soon. Tim
@justgarethsphone9663Ай бұрын
How goes the ninja brother, i fricking love these little monsters