Waves SuperRack Performer Setup with Behringer X32

Рет қаралды 66,716

Күн бұрын

Waves SuperRack Performer is a live real-time plugin processing program which allows the use of Waves Plugins live with your Behringer X32, Midas M32 or most other digital boards. In this video I show you how to get the Behringer X32 set up with Waves SuperRack Performer on your computer!
Learn more about my X32 Fundamentals course at: course.drewbrashler.com.
Check out Waves SuperRack Performer: waves.alzt.net/zNjbyM
Plugins shown in this video:
Waves F6: waves.alzt.net/9gezMy
Waves C6: waves.alzt.net/eKRErj
Waves CLA-76: waves.alzt.net/QyKnN3
Waves Renaissance DeEsser: waves.alzt.net/DKQb4y
Chapters:
00:00 Intro
00:17 Waves SuperRack Performer
00:51 Setting Up SuperRack Performer
02:00 SuperRack Performer Buffer Setting
03:34 Waves SuperRack Performer Setup on the Behringer X32
04:58 X32 Routing for Waves SuperRack Performer
06:36 Waves SuperRack Performer Rack Patching
07:45 Plugins Inside of Waves SuperRack Performer
08:32 Final Routing on Behringer X32 for Waves SuperRack Performer
09:14 X-UF, X-USB, and X-Live Setup for Waves SuperRack Performer
10:28 SuperRack Performer vs SuperRack SoundGrid
11:21 Conclusion & New X32 Course!

Пікірлер: 155

@elipto8836 Жыл бұрын

Thank you, Drew!! for taking the time to show us how to work the x32

@jessesleeper3167 Жыл бұрын

Talk about timely! I have been watching you for years and have learned more from you than all the others combined. This is "exactly" what I have been researching - how to incorporate Waves plugins into my Behringer X32. Thanks so much and can't wait for the next vids.

@xandefabia Жыл бұрын

I can't wait to see the video about inserting SuperRack Performer on the LR Bus. Great video Drew!!!

@deadstoned Жыл бұрын

Thanks for all those amazing videos, Drew.

@deepakwilson9998 Жыл бұрын

Thank you Drew 🙏 for your videos. Learning a lot from you.

@mickeymiguel2726 Жыл бұрын

Excellent lesson and enlightening

@sn0rbaard Жыл бұрын

Thanks Drew. I'm hoping to see a video where you show us how to use Flow 8 with Waves SuperRack Performer, and also more real-world examples of using it live.

@jigglepiggins6910 Жыл бұрын

Great video! I have been trying to spice up our youth room audio. We use the super rack setup with our SD8 in the main sanctuary. Thanks Drew. Love your stuff. You are a making a big difference buddy. Keep up the great work!

@DrewBrashler Жыл бұрын

Thank you so much!

@juancarlosadamesespino7223 Жыл бұрын

Thank you so much... always the best !

@oluwafemiakinyode2898 Жыл бұрын

Thanks for the eye opener. Kindly do a video with the Wing and supper rack performer 🙏🏻

@brazer4690 Жыл бұрын

Спасибо, как всегда очень полезно!

@J_a_k_e388 5 ай бұрын

Brother, you may have just solved our pitch correction dilemma. Thanks for showing us this, I praise God for you!

@serge4349 Жыл бұрын

Thanks Drew! Would be nice to see you talk about latency issues you can encounter and how to deal with it, nobody seems to be talking about it.

@DrewBrashler Жыл бұрын

I'm happy to make a video about this! Keep an eye out for it in the next few weeks!

@bmeijer7776 11 ай бұрын

I've never been able to justify the normal soundgrid setup my work has in their venue, but i havent done one show without ssl channel on drums and C4on gtrs and kick......I got a few foh tours coming up and this new waves software has literally changed me!

@AudioEmpire1 Жыл бұрын

Thanks sir

@velvetratm Жыл бұрын

Wow! Awesome news!

@Kevin_Daniel Жыл бұрын

awesome!!!

@IslandDigital Жыл бұрын

Drew , I’m a Drummer. Back in the day, I always had an analog mixer , the last one I had I believe was a Mackie 1604 VLZ . Now I purchased an X32. I bought this to be able to save multiple “ drum kit” sounds, various effects etc. then recall and play live/studio. So routing should be simple and saving kits should simple as well. Would you consider a video for Drummers who use(d) analog mixers now using X32. there is sooooo much on this console not needed for this use I’d like to see a video only showing simple operation for a Drummer and it’s benefits ! Thanks very much

@user-qj2cq4dv3k Жыл бұрын

You pretty much need everything this console offers for mixing pro level drums. EQ, compression, gates, effects. Busses, parallel processing, DCAs, maybe the output routing is the only thing you might not use much.

@awong5366 Жыл бұрын

Thanks, Drew. Please release video on how to insert superrich into left right bus.

@fenderjose401 Жыл бұрын

great video Drew, would love a video on how to create some shortcut button to quickly bypass SP and return the board (routing) to the way one would have had it before SP, in the event the computer freezes or you have a technical issue. I read some posts of people setting something up like that. Not sure if that is a scene recall, snippet, etc

@DrewBrashler Жыл бұрын

I'll plan to include this in a video in the next couple weeks!

@DanielEscobar-cg6ht Жыл бұрын

Thank you so much for running through the setup! I was wondering what would the set up be for running virtual soundcheck while still trying to get processing through super rack performer? I have my multitrack coming in to the console from Ableton Live. Is that even a possibility since the card on the x32 is already being used to process incoming audio from Ableton? I tried it out and was just getting overlapping feedback through my channels.

@winstonphilip9231 Жыл бұрын

Thanks, Drew! Can we call you Drew 🤗. We can always count on you for proper application.

@DrewBrashler Жыл бұрын

Absolutely! Thanks for watching!

@winstonphilip9231 Жыл бұрын

@@DrewBrashler I used it today. It was amazing! Dante with about 8ms of latency.

@isaaccastaneda6140 4 ай бұрын

Hey Drew, your videos have been extremely helpful, thank you! I do have a question, I purchased Superrack Performer and now want to use a multi track recording to play to superrack and finally to the x32 but I can’t seem to get the routing right. I end up having the audio coming out of waves tracks live to x32 then back to superrack and then back to the x32 which causes a terrible loop. Any advice? How did you get playback to your x32 while dialing in the plugins in superrack? Thanks in advance!

@baron1c Жыл бұрын

The new Yamaha DM3S looks sweet. Would love to see some content on that, other than the sales content that is out there now

@DrewBrashler Жыл бұрын

I actually have already ordered the Yamaha DM3-D, so I'll have some content coming out on that mixer once it ships in!

@Benhite Жыл бұрын

This sounds great! How would this affect simultaneous multitrack recording to a different computer? After applying EQ from super rack and changes to the card settings, would unaffected pre-fader inputs still be available?

@Gak_ada_nama123 3 ай бұрын

Tank you boss 👍

@randallbrown3495 Жыл бұрын

Hello Drew. Love your tutorials. Been using an M32 for years now and just purchased a P16m which I connect from a P16D across Ultranet. I noticed there are no videos from anyone on how to route effects across Ultranet to P16's. There are plenty of videos on how to route effects back into your monitors when you're using the mix buses, but nothing on routing effects back to monitors for musicians using P16's. Can you offer any advice? Thanks!!

@hondbanjer Жыл бұрын

One thing about de-essing, the de-essing plugin should be first in the chain. After the F6 and C4 you probally took out some of that esses already. De-essing the "raw" audio makes youre workflow faster.

@juniorsilvabroadcast 7 ай бұрын

Good advice

@leandrosilva6414 Жыл бұрын

Great Thanks! How to process the master channel with waves in the X32?

@sigil_theband1953 Жыл бұрын

Thanks - I'm jumping into this. I have the X32 Rack - do you still have to run your reverbs and delays through the X32, or does Superrack allow you to create busses fx sends like a DAW does?

@lotimarc7984 Жыл бұрын

Hey Drew, can you do a video on how to use Waves to record and livestream using the same PC? Thanks!

@jeffthompson6162 Жыл бұрын

can you set processing to the master LR and aux fx or is it limited to input channels?

@juancarlosadamesespino7223 Жыл бұрын

hello everyone. Thank you very much Drew for this video, it is very helpful. I have a question: What disadvantages do you see in using the x32 but for example with a DAW (logic pro) instead of the performer? In this way I can use several "brands" of plugins... do you think it's a bad idea?

@hiimlawrence 4 ай бұрын

I’ve been wondering this too, the difference between using superrack and using other DAW’s. I use ableton for example

@TeamMindset-np3sd 3 ай бұрын

One of the most underrated guy who can explain well and informative. Thank you for this Mr. drew! But i have a question and idk if its going to work because i have a behringer flow 8 and i wanted to do the same as from your video. Is there any chance that my unit can do this? Thanks!

@dokydukic Жыл бұрын

is dry signal still there? are you hearing dry signal + processed signal on the output of the x32 or is it only the processed signal from superrack that is going to the channel? I am wondering because when you turn the volume/gain on superrack, you can still see some levels. on your x32

@levanidzneladze8309 Жыл бұрын

Most important question! How to use Fx on LR and Buses? Exampl: X-fdbk on LR and Buses? Thank you so much and waiting for your reply ✊

@tobby917 Жыл бұрын

Great Video, just a quick question for clarification. Does this allow processing currently on any channel strip from the X32 to then be sent to superack? Or is it strictly from the preamp to superack then back into the board where all on board processing will be after superack?

@DrewBrashler Жыл бұрын

You would have to use the aux insert method to be able to use the channel strip first and then send to SuperRack, but you would be limited to 6 channels. I have a video that shows how to do the routing with the XWSG card but the main steps would be the same: kzfaq.info/get/bejne/j59kZq-du8elgJs.html

@carlnall7309 Жыл бұрын

Hey drew!! Thanks for the video. Is there a way to add your mix bus into this as well. Or only your inputs.

@DrewBrashler Жыл бұрын

Yup! I'll have a video on this in the next few weeks!

@litozuniga1224 Жыл бұрын

Hey Drew excellent lesson. Here at church we are working with a wing and in the process of installing the super rack my question is, is it the same process as the M32 what you just showed us?

@DrewBrashler Жыл бұрын

I'll have a video later this week implementing on the Wing and SuperRack Performer!

@JorgeVMusica Жыл бұрын

Hey Drew! What's the difference between the SuperRack Performer and the previous SuperRack Native? With the Native you could already use any audio interface of your choice.

@DrewBrashler Жыл бұрын

The main difference is the cost. They've now made it so that SuperRack Performer is a separate program from SuperRack SoundGrid so it's more a la carte.

@YongkiWibowo 10 ай бұрын

Thanks Drew, have you try superrack performer on Midas Pro Series and DN9630?

@user-oi3zd3dq9g Жыл бұрын

How can I input the waves superrack performer when using a recorded multitrack for practice?

@onlyforyoutube9783 Жыл бұрын

Thanks Drew! Is the latency from the built in usb card workable for a small to mid sized club show? I think the roundtrip latency is something around 7-10ms and this seems quite much?

@DrewBrashler Жыл бұрын

Yes, I've used it in a small show before and it worked quite well. The only issue you will have is if you feed this to the monitors.

@aakburns 10 ай бұрын

Drew, I use my x32 with the card to my daw. For my windows audio, I use X_UF Wave out 01/02. Will this allow me to use waves plugs for those card outs as well, such as the windows audio out this way?

@jackiefrederick8795 Жыл бұрын

Question: I am needing help connecting an X32 full board as FOH with an x32 rack as monitor world. We are using an S16 as our connection point for both consoles.

@Account7362514 4 ай бұрын

Hey Drew! Does the xlive card record audio before the super rack performer plug-ins, or after? I am hoping before to still virtual sound check with the xlive card while getting to use waves plug-ins. Also your videos continue to be awesome! Matt Walker

@zebmccall2610 4 ай бұрын

Are you able to route all your channels or some channels plus the LR main speakers into the super rack performer and then route it back to the x32 if so how would you do that

@Stephenojohnson Жыл бұрын

Great video! Question: 1. What if I want to tune my vocals 1-4 singers but also have the flexibility of routing those to an empty Channels in the console ( Ch 20-24) so if my laptop crashes, I can bring up Channel 20-24 and it will be the unprocessed ones! Hope this make sense?

@mSarimaa 6 ай бұрын

Configure the empty channels to have the same input Source as the main Vocal channels.

@michaeljoseph2365 4 ай бұрын

I love your videos it has help me so much, but the question i have how do i use reaper to do a live tuning and have it going through superrack?

@IsaacLinstad Жыл бұрын

Hey Drew, we've got an X32 with an X-WSG card. Will SuperRack Performer also work via SoundGrid?

@psalm333musicinstruction2 3 ай бұрын

Thank you Drew! I have a MacBook Pro Retina, 13-inch, Early 2015 with 8GB of Ram and a 2.7 GHz Dual-Core Intel Core i5. Do you think it's powerful enough to run SuperRack? I would primarily be using Waves Tune on three vocal channels via the Behringer x32.

@BMATSTUBE Жыл бұрын

Is there an issue running your card out and in for virtual soundcheck through your DAW, and Super rack at the same time ? Can you do both simultaneously?

@jhfjhgfgcfhgcujgchgc Жыл бұрын

I can’t figure out how to get a superrack to work with an x live card for virtual play back off of the internal SD card. It seems like superrack is receiving the signal, but it’s not processing the audio with plug-ins. What should change on the inputs or card tab and the routing to make everything work? Thanks

@johnchristiansen8804 Жыл бұрын

Is it possible to run waves on one pc and Record on another at the same time ? I am using live card p But want to record on a seperete pc

@frederickgardiner7771 Жыл бұрын

Hi Drew, what about if I want so send just inputs 1 -8 and allow the rest of the inputs to go through the x32? Is that ok? Am asking because you recommended sending all your inputs into the SuperrRack

@DrewBrashler Жыл бұрын

Yes, you can definitely do this.

@joshboozer3065 Жыл бұрын

So I run almost this exact setup, except I use a compact console with an S16 and logic instead of superRack. I’ve found that I’ve lost my phantom power on all of my channels. Do you know why, and if there is a way around this?

@mata.yoguee Ай бұрын

Hi Drew! Amazing video!! Quick question, with the Performer, are we able to process Master L&R?? Thanks!

@DrewBrashler Ай бұрын

You sure can! Check out this video: kzfaq.info/get/bejne/g5x-rdJomcy2p40.html

@mrdjoofficiel1873 Ай бұрын

very nice video. I would like to know. possible to connect waves superrack performer to Berhinger flow8? if so, we would also be impatiently waiting for the video 😊👌

@user-ke6pr5su1v Жыл бұрын

Hi drew, i didnt understand something... Can i set up waves with x-usb or i need another?

@hiimlawrence 5 ай бұрын

So with this setup what exactly is the signal flow? is it source input -> x32 channel strip processing -> SuperRackPerformer -> X32 fader?

@jasonrandall8932 Жыл бұрын

Hey drew got a question related to an FX called (wave designer) which is on the X32 - I've seen on videos of the FX on the behringer wing but it doent seem to be on my behringer wing would there but a reason for this?

@obidavekenobe Жыл бұрын

Great news for us using lessor expense mixers. Now, could this work over Dante in theory?

@DrewBrashler Жыл бұрын

Yes, it could. Dante could possibly add a little bit more latency than just using the USB card.

@dantantua3446 Жыл бұрын

Thanks Drew.. i think i may have figured out a way around the live Stream mix using the super rack performer without impacting the the front of house mix. - i am doing a split on the input and sending those to another channel, then disable these new channels from the the main mix. since these are pre-eq. i can do what i want with those.. then i send the signal to super rack then back - them to the streaming bus channel.. this way the front of house mix is different from what is streamed... my only other caviate is to use another sound card to receive the steam bus cannel to the streaming computer . so i pass it to vmix. in vmix i can add a video delay to sync with the audio. - what do you think?

@BjorgenEatinger Жыл бұрын

Seems to me that you could use a matrix for streaming, and that would give you a completely independent source unaffected by the items you mentioned.

@timmull8211 Жыл бұрын

Hi Drew, will you please make a video on how to setup and use SuperRack Performer on the Main LR, on a Matrix, and on any Bus channel on the x32/M32

@BjorgenEatinger Жыл бұрын

Since you have freed up the effects slots on the console, you could do that there in a pinch, and with zero latency.

@timmull8211 Жыл бұрын

@@BjorgenEatinger Thank you. Will you please elaborate more?

@freezeframe87 3 ай бұрын

Hey Drew, how does this differ from using the generic USB 2.0 card (X-USB) on the X32?

@benseghers6905 Ай бұрын

Hi Drew! Im using the M32C. Is there a way to work wireless with superrack?

@ra4fun4me Жыл бұрын

Nice how to. How can we still use the onboard eq with this setup?

@DrewBrashler Жыл бұрын

This would be before all channel processing, so you can still use low cut, eq, compressor, gate along with it.

@KlausSchmuck 5 ай бұрын

What if pc is crashing down? Are then the vocals off? Is there a security net.

@kreamztv709 2 ай бұрын

Hello drew,i recently bought superrack performer and i tested it with my x32.it turns out that i cant change the buffer size in the super rack performer settings, i tried set it up on x32 driver control panel setting (am using windows).tried to set it to 48 samples but it still stuck on the superrack performer app showing it on 96 buffer size.i tried to measure with smaart and it shows up 12ms without inserting a single plugin. is this normal ? or did i miss something ?

@DarkPolar666 3 ай бұрын

So... let's say that already own some waves plugins that I use with my DAW, can a I use those same plugins with superrack performer to connect it to my X32?

@wayneebersole2054 Жыл бұрын

With this routing setup (Card back into channels 1-32) what happens if Waves SuperRack crashes? Do you lose all signal from the X32 to main speakers or is it just dry signal from inputs going to FOH?

@DrewBrashler Жыл бұрын

If SuperRack crashes, you would need to have a snippet or a scene recall to swap the audio routing from the Card 1-32 to your inputs (Local 1-32). So yes, you would lose all audio if your computer crashes.

@onnodevisser1956 Жыл бұрын

Using the card for waves means no multitrack recording ? Or is it possible to split the usb cardoutput to two laptops?

@DrewBrashler Жыл бұрын

That is the beauty of the X-Live expansion card, is you would be able to record to the SD cards, and then use the computer side of the card for use with Waves SuperRack Performer. However, if you needed to, you could still open up your DAW alongside SuperRack Performer on your single computer.

@verbopontapora4840 4 ай бұрын

I have an M2 MacBook, and when I try to run the audio processing through it I get lots of audio glitches. The buffer size is set to 128 and the clock to 48kHz. Any ideas?

@user-mz3ni8yu4v Жыл бұрын

Can you do it with the Allen and Heath SQ?

@dirk-k-aus-oeln Жыл бұрын

Can you show how to use PSE from Waves with Studio Rack Performer. I am particularly interested in the sidechain function. How can I send multiple sources in PSE to filter out the unwanted signals? I'm familiar with the general handling of PSE, I just want to know how it works in StudioRackPerformer. Thank you for your work, you've taught me a lot!

@DrewBrashler Жыл бұрын

Any reason you're looking to use sidechain instead of using the PSE as a gate?

@dirk-k-aus-oeln Жыл бұрын

@@DrewBrashler I use PSE live in my FOH mix. In order to use PSE properly, you have to sidechain all unwanted signals into the PSE instance of the vocal microphone. For example: snare, kick, toms, loud guitar amps. That's the great thing about PSE, the gate isn't opened by crosstalk from the snare, kick, toms or guitar amps, only by the vocals! So I get a much clearer vocal signal without the dirt from the other sources and the gate works more precisely. Provided all parameters are set correctly, for example ducking and distance, this is sometimes a bit difficult but worth it. Without the Sidchain function PSE is not usable for me, because then it is just a normal gate!

@ajreis536 Жыл бұрын

I am fearing that in live FOH situation, the latency would be diminishing the quality of channel processing?! I tried using ableton today as VST host and there was latency galore, worst part is on monitors :( I feel I need to invest in teh full Superrack or equivalent or just use onboard and outboard analog processing. What are your thoughts?

@BjorgenEatinger Жыл бұрын

What kind of computer are you using and how much memory is in it?

@eastcoastproductions6422 4 ай бұрын

Hey Drew, I have everything connected, using the XLive card. I've not had any issues when using "Logic Pro" from multitracking or playback. But for some reason the SuperRack isn't seeing the XLive to connect. I'm using a brand new "dedicated" mini PC to run this. In the permissions It says "Sound grid" and not "SuperRack". I granted permission anyway, but it's still not seeing anything on the SuperRack. Any ideas?

@eastcoastproductions6422 4 ай бұрын

If anyone else is having this issue I found the answer. I just had to download an ASIO driver for XLive (X32). It now see the connection and we re good to go

@julio80c Жыл бұрын

Ola! Desta forma eu libero todos os 16 BUS para fazer vias de fone? Ou seja, consigo fazer 8 vias Estéreo?

@abelcubanoo Жыл бұрын

Question: instead connecting to the console via USB, can be used using Dante? My console only has Dante card, No USB.. thank you

@derekklomburg7396 Жыл бұрын

Can I use a Midas m32s card to run it without latency issues?

@tinychurchjams 11 ай бұрын

Is it possible to put plugins on a group or a bus?

@joelromero2949 Жыл бұрын

Drew will this add any additional auto mixing to the x32?

@DrewBrashler Жыл бұрын

If you owned the Dugan automixer plugin, then yes you could do your automixing inside of Waves.

@joelromero2949 Жыл бұрын

@@DrewBrashler thank you I'll explore this, can you do a video covering this likely be a popular video!

@liordelman 4 ай бұрын

What about adding plugins on groups / busses?

@edward5525 Жыл бұрын

Any recommendation on the specs for the computer which I should use for processing only 16 Racks

@DrewBrashler Жыл бұрын

It all depends on the amount of processing you're planning on doing. For light processing, any newer computer would do just fine. For heavy processing, I'd recommend an M2 or an i7.

@edward5525 Жыл бұрын

@@DrewBrashler Thanks for the advice ,very helpful,at my church Im looking forward to process the vocal wish will be 8 channels plus a violin and 2 saxophone

@richardsemerjian171 9 ай бұрын

Drew, Used your X21/WAVES Performer setup Guide for my M32 I use on small corp gigs ( I'm usually on a Digicow/ Soundgrid &SuperRack, lol) Gone through your setup guide for x32/Perormer several times after I had no luck getting it to work correctly (routing/patch issue?) Mic shows up in Performer's correct channel, both in and out, BUT as soon as I enable USB interface on card setup instant loopback that pins every channel. Ideas? I have a support with WAVES but haven't heard back as of yet. I'm using an M32 v4.06, XLive card, Performer installed on my Mac w/WAVES licenses on a USB dongle from MacBook Pro running OS 12.6.7 Monterey and the card works fine for recordings Anyone got ideas??

@popcorn8D 9 ай бұрын

I have the Klark Teknik DN32 - USB card on the Midas M32. I followed everything on the video and I got signal coming into SuperRack Performer but its not going back to the board. I am not sure what I have done wrong or if its a card issue and has different steps.

@PaulCherian 3 ай бұрын

Could you make it work? Is it working with M32 - DN32 properly?

@michaelbeskales339 6 ай бұрын

how can i record multitracks while i am using super rack performer?? thanks

@anirbanbiswas8784 Жыл бұрын

Great video sir, does it support third party plugins

@KingFaderRecordings Ай бұрын

VST3

@ashleymadison9380 Жыл бұрын

I have a waves server that I bought a month before our theater shutdown before COVID. Does this replace that? I've actually never even learned how to use it. :-(

@DrewBrashler Жыл бұрын

If you have the Waves server and the X-WSG or the DN32-WSG expansion card, the routing is the same, just you will be able to tap into the faster latency side of SoundGrid!

@ashleymadison9380 Жыл бұрын

@@DrewBrashler Thanks! I have the M32 with the X-WSG card and a waves server. I'll have to update everything on my Mac and give it another go. Original plan was to use a legacy Dugan plugin from wavs to auto mix multiple mics on a stage on Broadway in NYC... Then COVID came. Trying to get it all up and running now. The auto mixer on the Midas doesn't do a good job and it's only 8 channels. :-( I miss my old stand alone Dugan!

@ericvantellingen8648 5 ай бұрын

Does anyone have experience with live mixing and the latency ? I want to try to use it for guitars, with the right plugins, so we can rid of the cabinet on stage. Is the latency not to big ?

@vasilerobert3069 Жыл бұрын

How did you lowered the buffer size?...i can only have 512 buffer and,when i try to lower it,it pulls me down to 512

@DrewBrashler Жыл бұрын

It should be able to go lower than 512. I'd be double checking the driver version if you're on a PC to see if it needs an update.

@arthurwouters8515 3 ай бұрын

Hey @vasilerobert3069 ! I have the same problem! Did you find the solution?

@abep4927 7 ай бұрын

can i add waves server that i have as well to help with the latency???

@mELONHEAD1899 Жыл бұрын

Hey I tried all of this and my channels sound like static and garbage. Like the routing is trying to work but something is wrong with the processing on my software. Any suggestions?

@tommycMW3 Жыл бұрын

will this work on the wing ??

@DrewBrashler Жыл бұрын

Yes, I'll have a video for that soon!

@prefix808 8 ай бұрын

Is Superrack Performer compatible with the KN32-WSG card?

@rudygomez6996 Жыл бұрын

Hello, i have MacBook Air with M1 chip, is my MacBook fast enough to lower latency to feed this superrack to monitors? Thank you

@DrewBrashler Жыл бұрын

As long as you're keeping your processing chain minimal, I don't see a reason this wouldn't work.

@rudygomez6996 Жыл бұрын

@@DrewBrashler thank you, in your plug in chain you didn’t have reverb, is that because it would require too much processing? in live vocal performance environment

@DrewBrashler Жыл бұрын

Reverb and Delay plugins will take up the most DSP and CPU usage on your computer. I would recommend using the built-in X32 reverb and delays. But TrueVerb is one Waves plugin that is made for inserting directly on the channel.

@rudygomez6996 Жыл бұрын

@@DrewBrashler thank you!