Great video, I can’t believe you were able to get the egg release filmed.

“One of the guys just figured out how to get in under here” How adorable XD

Can we get an update on how many fry you ended up getting?....

i wish they’d sell these full-size breeders boxes with the craft mesh floor. copyright that. get yo $$$. ☺️☺️☺️ great videos! fantastic that you caught the egg laying moment.

Mine laid and took all the fish out to do a heat treatment. Got it up to 88 and noticed little fish swimming. Day 17 now and I got around 60-75 having fun with it there getting big. Always wanted to breed I was like yes! I did it I did it lol.

Been a Sub for awhile now and I absolutely Love your content and how caring you are with what you do. Also love your hair getting longer. Can’t wait to see you hit 100k Subs. Keep up the Great Work!!!

What a great video, looking forward to seeing the outcome of the eggs.

Wow great footage! Now I know what the eggs look like and I'm giving this a shot with my cardinal tetras!

Thank you so much for sharing your journeys of breeding -- very appreciated! And, even your failures are super helpful!

What a great video!! Great detailed step by step!! Very interesting I'm learning a lot 👍😁❤️

From other fish breeding youtubers I think that sometimes it takes two males to entice a female to spawn. Maybe you can tie down the moss a little closer to the mesh, in order to make the falling distance smaller for the eggs? I've also thought about designing a 3d-printed spawning grid that is rigid and has bigger gaps (still "parent safe" though).

Excellent video, thank you so much for sharing this!

This was so very helpful! Thank you!

Amazing! This method is pretty interesting too! I love how you take great care of these breeders! And congrats on fry! So exciting! Thanks so much for sharing this with us! So helpful and so much great info! Stay safe, and keep up the incredible work! Loving your vids!😉

nice video. I have a couple of suggestions that might be useful for you. You can cut the mesh a little bit bigger and place it higher in the container. Maybe a little over half of the high. You place two rocks on the bottom the sustain the mesh and the smaller rocks on top of it the hold it down, as the mesh will be a bit bigger and you have to push it down, the fishes can't go underneath. And being a little higher the eggs would be safe faster. The other suggestion is to feed the fry. You can get a high protein food and crush it to became a sort of flour texture. I use it to feed fry since day one and they nibble it. You should also put a lot of plants from a mature tank in the fry container, so you will have a lot of micro organisms for the fry to eat and feel safe. Sorry for my lousy English.

Can't wait to try this

Great vid as usual 😍

This videos inspires a lot .thanks man

What a great video! Thank you!!

Basically is your favourite word it seems :D Greatly explained in detail everything.

Dean off aquarium co op used a mesh basket with foam fill in the lip of it to help it float. if you're using a tote tub per say you just put the adults in the basket and the eggs will go through the wholes in the mesh basket. Can be used for livebearers too.

Great Information! I definitely learned a lot from this video. Thank you 😊

This is sooo wholesome

Great video.

Very informative and interesting. I really like the way you attack this problem 🎉👍

Nice fish 😊😄

Its Really Amazing Video, Thank You For Sharing Knowledge

U got a New subscriber 👏

哇，好厉害！我最喜欢的鱼种是霓虹灯鱼咯！

omg!!so much of work to breed them.good video.

Thanks buddy !! 😉

Just discovered your channel today. Great information on breeding neons. I always wanted to breed neons but never knew how. Thanks a lot. Also if you know, are rummy nose tetras breeding methods the same way?

Terima kasih, thanks from indonesia..

I often see my rummynose breed in my aquarium exactly as you said. In the morning when the first light comes on! I could even able to see the the eggs getting dropped! Sad part I couldn't save those eggs due to aquarium size!

i love quality of you videos! please do some methods of breeding cherry barb :) cheers from Poland

Love the music

how do u know which is male and which is female

Oh my you got it on video.. 17:04 so beautiful.. i have see like that also with my own eyes on my galaxy rasbora's same behaviour.

Good video

Awesome advice bro👍 I like this method better as they can't eat eggs.

Awesome video brother keep it up loving these tutorials :) thanks for sharing. Could you tell me the size tank measurements you're using to breed these neon Tetras thanks 😃

So a question about the peat moss. If I did that and the moss grew. Would I be able to put some of that in a regular tank? I like to look of it. Plus great for breeding.

My neon tetras just like literally RANDOMLY had baby’s in my tank rn so I’m kinda freaking out tryna find what to do

what if you replace the white mesh with green mesh and without the moss. would it trick the neons that the green coloured mesh is the *moss*? would it work? i saw some footage where zebra danios are bred in that similar manner. i would definitely reduce the distance for the eggs to travel to the bottom if spawning occurs on the mesh.

Hey bud, i have about a school of neon tetras that I’ve been currently conditioning. I just wanna ask u how u feel about using dried leaves like indian almond leaves to lower the ph in the water becus i have no access to peat moss.

Do you do water changes on the breeding tank, if so, how do you avoid sucking up babies and eggs?

Fingers crossed for a large hatch!

Can you grow some of the infusoria where the fry grow

Hay, love your videos ,really helpful to a newbie. I have lots of Bristlenose im trying to breed and just got a bunch of neons and a couple of Amber tetras for dither fish, and did a bit of a cold water change during a storm a couple of days ago and last night i noticed an Amber and a couple of neons looking chubby and tonight it looks like I have eggs scattered along the bottom of the tank on the glass. The water is fast moving for the plecos and no substrate or many plants yet. They seem kinda spread out and sort of on their own with just a couple of neons hanging out nearby but not really looking after them. Im not sure if I should remove them or leave them be. I wasnt expecting the tetras to breed so fast without anywhere appropriate to lay their eggs. Its a shame it wasnt the plecos like I'd planned and hopefully they wont eat the fry but so far the eggs havnt been eaten by anyone, Yet

Nice👏🏻👏🏻👍🏻

You should put that peat in a mesh bag like the one you can use to wash baby brine shrimp. I mean even a burlap bag would do the trick. You can then have better access to the fish and eggs. Also you can move the bag to a new tank to condition it after this one is done. I think the commercial farms only put 1 single pair in each container to cut down on the egg eating bystanders.

So watching my male and female (I'm guessing as she's fatter with a blue curve), and the male is definitely trying to entice the female to come over the moss, but nothing for the last 2 hrs, in the breeding tank. Struggling here to get the pH lower than the main tank of 7.5. Got Coco peat in the breeding tank (Peat Moss not available here in the UK), Almond leaf in there and even tested the rainwater, but it will not drop from the 7.5. Any other suggestions on how to reduce this pH, without chemicals? Tried everything. Cheers

We can try lipton tea bag to lower ph down.. use moss for breeding...

can we use Coco Peat for lowering the ph in water??

What is the TDS/EC and KH/GH in your setting?

How about you put little java moss on the mess or no java moss at all

How do you acclimate the fish to transfer to lower pH

Wow fantastic video 👍. Just a few questions as I’m hoping to do this myself ahahah! What temperature was the aquarium tank with the neons? Was it 21/22 degrees like the breeder box? Thanks so much!

Are head and tail light tetras similar

so today i witnessed my neon tetras spawning today. it was pretty cool watching the lil female throw he eggs all over my java fern roots and watch about half of them drift away, and oh bou did the spawning cause a feeding frenzy to incur amongst my corydoras almost instantlg and my dwarf gourami went total hunter mode snooping for eggs

My water is around 6 ph out of the tap would I still need the soil

hi , what type of peat moss to you use ? plain or acidic one ? thanks

The grid works. But it has to fit well. I 3d print mine. Ratio I had best luck with is not 2 females to 1 male but just the opposite. 2 males, one fat female and it worked fine. Same ratio works for Cardinal tetras too. Edited to add: After the trio spawns, remove them as usual, then put another trio in the same setup. The grid prevents predation on the first batch of eggs and the second trio just adds more. Then do it once more for the third day (no more). That maximizes the number of fry to raise as one "batch".

Has any one been able to name a group of 6 neon tetras and remember know which one is which? I just got neon tetras and only saw 2 that were different.

Hi can you pls do a video on how to breed glow light tetras

There are certainly more profitable fish to breed out there... Nonetheless, it's a popular schooling fish so hopefully people buy them in schools. Dunno what route you're going through to sell them, but certainly suggestive-sell them that way. They're hardwired for it, lone tetras don't last long at all. But I hope to see the video after this, where you tell how many you get out of this method, vs the 15-20 from the last method. Interesting stuff.

Say basically… One…. More…. Time ! Very helpful though, thanks

What can I feed them instead of infusoria ?

How long do you wait for each spawn

Two things, one if your neons are as small as mine are how many eggs do they really hold? You have to go with 1out of 5 are infertile. Two, if they are laying in the java moss and you agitate the moss and remove it, doesn’t it figure you will be removing a good portion of egg in the moss?

How many gallons is the container?

I love you.

So what happened... how many did you got out of this batch? Less than the other method? Or more? There is not a follow up video... :(

So no filter or water changes?

Could you please let the equipament / ingrients you used to ? (I am from Brazil, they are cheap here, but no one really breads them. I want to try that. Where do I get that Container with the black lead you have? Thank you.😁

Great video! What if you lowered the water level so the eggs fall quickly through the mesh?

Could you have food in there with them to stop them eating the eggs?

What camera you use?

You might as well get a plastic tub. Have the neons in a floating crate with holes on the bottom and have them breed in it. I think they’re plant crates. They eat their own eggs. No wonder they’re so hard to breed.

What was the volume of the breeding tank?

HELP! I think I’m a fish nerd When’s the next live stream

Any update 😎?

Just an FYI.... If you are using the cubed frozen blood worms, take a razor blade and shave the cube while frozen. Make real thin slices and you end up with short pieces of blood worm and no choking hazard

Does it have to be peat moss or any type of peat ?

Can you make one for Zebra danios please.

What age do neon tetras breed?

I had to pause that to read that

great video! could you please send me the link for your ph pen? Thanks:)

yo, do a chili rasbora breeding tutorial :0

Won’t they need a filter without a box ?

You never did a follow up. How did it turn out?

Hey! I did the same thing with Zebra Danios a few years ago here: kzfaq.info/get/bejne/Y9GUdceisZbLaI0.html try lowering the water so that the eggs have less time in the upper chamber!

What about mosquito larvae?

What ph meter are you using ?

"basically" anyway nice video !! ;)

Pretty good but after a year there are no more updates I watched all 4 videos but checked for more and haven’t seen any update

Early gang

Do the same as you do, but only with about 2 cm of water over the net, so that they cant eat the eggs before they so under net,

you should have fed them as soon as you removed the blanket to prevent the females to eat the eggs as the spawning is pretty exhausting. and also keep some(a little bit) food in there while spawning.

I have rainbow one