Bending wood for furniture...tips, tricks and techniques.

Рет қаралды 2,855,586

Күн бұрын

Bent Wood Table // Bent Lamination // Dining Table… In this video, I decide to bend some wood. There are various ways to accomplish bent lamination, such as steam bending, kerf cutting or the method I used which is to cut a series of thin wood laminations to bend around a form and glue them all together. It's a time consuming task, but well worth the effort. A bent lamination detail adds nice visual interest and can really enhance the appeal and value of a piece of furniture. It opens up a whole new design aesthetic to incorporate into your furniture designs. I'm certainly NOT an expert, but I think I learned quite a bit on this project to help me on any future projects that will require bending lamination to give a bent wood look. Well, I probably learned even more because I had to build it TWICE!! Stay tuned to the end of the video to find out why I had to build two tables. #bentwoodtable #bentlamination #kjsawdust #bendingwood
➤ Join my Modern Wood Academy and build a Modern Walnut Console Table along with me: rebrand.ly/modernwoodacademy
➤ Sign up for my FREE 3-part Video Series: bit.ly/KJfreevideoseries
0:00 Intro and bloopers
0:31 Building the forms
2:51 Re-sawing the bent laminations
4:29 Building the center post
5:50 Building the top and bottom sections of the base
8:23 Pre-bending the laminations
9:19 Final modifications to the bending form
9:47 Bending and gluing up the first bent lamination
11:47 Trimming the laminations to final size
13:26 First dry fit
13:32 Fitting the curved laminations to the center post and base
14:16 Installing the recessed adjustable feet
15:10 Hardware installation and final details
16:09 Final surface prep and finish application
17:37 Why I built 2 tables
18:26 Final glamour shots and outro
------------------------------------------------------------------------------------------------------------------------------------
➤ You can now support me on Patreon! / keithjohnsoncustomwood...
➤ Woodpeckers Tools: www.woodpeck.com/?rfsn=584965...
➤ Instagram: / kjsawdust
➤ Nick Barboza’s Instagram: / nwbwood
➤ ShopSounds Podcast: podcasts.apple.com/us/podcast...
➤ TikTok: vm.tiktok.com/psy918/
➤ Website: www.keithjohnsoncww.com
------------------------------------------------------------------------------------------------------------------------------------
➤Additional videos for bending wood:
• Bent Lamination Basics
• Bent Lamination
• Serious skills! This g...
------------------------------------------------------------------------------------------------------------------------------------
➤ My Tools (Woodworking & Audio/Video): www.amazon.com/shop/kjsawdust ------------------------------------------------------------------------------------------------------------------------------------
➤ Affiliate Links for Tools/Products used in this build:
Infinity Tools Dadonator Blade: tinyurl.com/InfinityTools-Dad...
36-inch Irwin Quick Grip Clamps: www.amazon.com/dp/B001W02QYU/...
Gorilla Glue Polyurethane Glue: www.amazon.com/dp/B0000223UU/...
Rubio Monocoat PURE: www.amazon.com/dp/B00OA5V19K/...
➤ For all the songs I used, Check out Epidemic Sound! Try it for FREE for 30 days!
www.epidemicsound.com/referra...

Пікірлер: 2 200

@poppy.fishing 8 ай бұрын

As a young man around 40 years ago my father took me to a local lumber jack and horse show in the hills of Appalachia Kentucky. That was when I was introduced to wood turning. It was a treadle style wood lathe with a sapling as in your video. The craftsman was building tables and chairs all from hand tools starting with logs he used no nails, screws, or glue. We watched for hours! I was very impressed! Thank you for reminding me of a great day with my Dad.

@KeithJohnsonCustomWoodworking 8 ай бұрын

Thanks for sharing your story! Sounds you have a lot of wonderful memories to look back on 😊

@plasmac9 3 жыл бұрын

The craftsmanship on this is just astounding. This isn't just a piece of furniture this is a work of art. Most people will sit at that table and never have any clue how much skill, knowledge, and hard work went into building that.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you SO much, Matthew! Yeah, lots of blood, sweat (and a few tears 😬😜), but lots of experience gained as well! 👍

@thisishisbubbles9362 9 ай бұрын

As a hobby carpenter, I have soooo much appreciation for the amount of work it takes to put these things together. It's the type of thing I would buy because I know I don't have the time around homeschooling and raising kids to go do while my husband works.

@PeterKertesz2013 8 ай бұрын

Beautiful.

@patfaulknier31 4 ай бұрын

8@@thisishisbubbles9362

@martincox7354 3 жыл бұрын

I’m an experienced woodworker and have made many laminated forms as well as steamed. I have nothing but praise for your methodology; it’s exactly how my processes have evolved. It was quite late on that you confirmed that your walnut was air dried - that’s quite important as kiln dried timber can/usually does take bends and steaming quite differently. Separately to the methodology is the design. That’s very personal but I, personally, think your base is very elegant. Sturdy but not chunky. To my eyes. I’d have that in my house. Good clear guidelines so that people can quite easily follow your process.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you very much, Martin! I appreciate the thoughtful comments. And yes, I always try to go kiln-dried when possible, especially with walnut.

@JenniferPChung 10 ай бұрын

How do you know if the wood you're getting is air dried or kiln dried?

@777midori 10 ай бұрын

A true master makes their craft seem easy. Somehow this appeared to be a breeze to fabricate…you’re a genuine virtuoso.

@KeithJohnsonCustomWoodworking 10 ай бұрын

🙏🏻👍🏻😎

@rareword Жыл бұрын

Good job. No annoying background music, excellent presentation, clear instructions and remarkable workmanship

@KeithJohnsonCustomWoodworking Жыл бұрын

Thank you very much!

@aandmservices2518 5 ай бұрын

Ditto "...no annoying background music..." Awesome video.

@Merennulli Жыл бұрын

Love the 4 paw inspection your assistant gives your work. I can hear the thought process. "This material would make a very nice box for me to sit in, but I guess it looks ok as a table too."

@KeithJohnsonCustomWoodworking Жыл бұрын

😹 They 4-paw inspection is key!!

@Hans-DieterReinhold 9 күн бұрын

Incredible woodwork!!!!!!! Kind regards from Germany

@KeithJohnsonCustomWoodworking 9 күн бұрын

Thank you very much! 🙏😎

@jameszumbrock1650 3 ай бұрын

This guy is great, very intertaining. He's like the Sam the cooking guy of woodworking

@KeithJohnsonCustomWoodworking 3 ай бұрын

This guy thanks you.

@ErrBuzz 3 жыл бұрын

That's what I'm talking about!!! You are the champion of woodworking videos with that kind of narrative!!!))) Thanks for the art of both woodworking and narration!!?

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Wow, thanks! You da man, Viktar!! 🙌 🍻

@texasRoofDoctor 3 жыл бұрын

Damn Son, that was amazing. Hopefully your clients appreciate your craftsmanship. You are an inspiration.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much!! That means a lot 👊

@just3minutes 3 ай бұрын

You are so funny. Its a beautiful piece. I can't wait to try bending wood! Thanks for the education

@KeithJohnsonCustomWoodworking 3 ай бұрын

Thanks for watching!

@codyquarles8955 4 ай бұрын

I work in the Commercial Casework industry... with 20 years in milkwork. I consider myself a millwork specialist. I do not have a degree in wood products but have definitely worked on some amazing projects and had the pleasure of learning from wood workers whom worked in mills longer than I'd been alive... I must say you're work is impressive. Clean shop and well taken care of machinery are essential to success or avoiding problematic process or even injury. I just wanted to commend your work and relay you are a true craftsman in my eyes. Look forward to watching future projects you may do and share for all the wood working community. Btw... I bet that walnut splinter hurt... oak is worse in my opinion... My old boss would see me digging a splinter out and he'd say: "you trying to steal wood again?" Love that joke.. take care and God bless... Jesus was a carpenter... your doing the lords work my friend!

@KeithJohnsonCustomWoodworking 4 ай бұрын

Thanks very much! That’s very kind of you. 🙏🏻

@brianerickson8204 3 жыл бұрын

Damn, I thought I was a good craftsmen... Beautiful work Keith!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much, Brian!!

@jaapvandiermen8806 3 жыл бұрын

EJ. I. ,

@JustinLinn1998JC 3 жыл бұрын

This was so relatable to woodcrafters. The frustration, risky cutting, and quality humor.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks man! And oh yes, all those issues are all too common. I just hope to reduce them as much as possible 😬😂

@thomasklugh4345 3 жыл бұрын

The quick grip clamps were probably the coolest thing about this whole project. Okay, and the cool toys this guy has, and okay he's got a sense of humor too, and...

@KeithJohnsonCustomWoodworking 3 жыл бұрын

😂 Much appreciated, Thomas! 👍

@geneinman4488 5 ай бұрын

Nice Shop ! Young Master. Retired Custom Home Builder, No projects like yours . Gene Inman

@KeithJohnsonCustomWoodworking 5 ай бұрын

Thanks very much!

@hhhsks 5 ай бұрын

This is amazing! New woodworker here. I hope to someday start making stuff as beautiful as this

@KeithJohnsonCustomWoodworking 5 ай бұрын

Thanks man!! Best of luck on your woodworking journey 👍

@garyrobinson6175 3 жыл бұрын

I am very glad that you decided to restart your youtube journey. I love the way you add a little humor to your vids. Keep up the great work.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you for the kind words and for following along! More to come! 👍

@chandarussell 3 жыл бұрын

Very nice. I love it. I really like your cat too. Beautiful grey feline.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much! 🙏🏻😸

@averagejoesworkshop 3 жыл бұрын

You, sir, do exceptional work, and your humor is relatable and on point. Well done.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you kindly, Joe!! That means a great deal. 🙏👊

@jessicaannes Жыл бұрын

Keith, this build is absolutely gorgeous!! The wood-bending is what brought me to this video. It would be awesome if you could do a tutorial on making a reusable form/mold for extra large, round and tapered concrete planters. I only find videos on planter molds that are squared or rectangular.

@KeithJohnsonCustomWoodworking Жыл бұрын

THanks so much, Jessica! And thanks for the idea! That's probably something that would need to be build from melamine to help with an easy release of the concrete.

@bigdogmn73 3 жыл бұрын

Another CLASSIC from the great KJ! Thanks for sharing with us man! LOVE IT!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks bro!! Always appreciate the support! 👊🏻

@nexxterra 7 ай бұрын

Your supervisor (cat) got you a subscriber!

@KeithJohnsonCustomWoodworking 7 ай бұрын

😸 Jerry and Lola seem to be the real attraction. 😂

@spenserolson7937 3 жыл бұрын

This was another amazing build! I can't believe you had to make 2 of them. Way to not let that get you down though!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks Spenser!! Had to pull up those proverbial bootstraps and get it done! 😜

@Corathor 3 жыл бұрын

@@KeithJohnsonCustomWoodworking Did you get to keep the second one for a fancy kitty scratching post? :-P

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Corathor 🤣😹 They prefer to destroy things with fabric.

@swjang3584 3 жыл бұрын

Another great work!! You know what! Your video clips have made me feel impressed a lot! Thanks for having me watch your marvellous work.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Wow, thank you! I really appreciate it!!

@user-jv7zp9sc8q 5 ай бұрын

I am in the corporate world so zero experiences related. One of the smartest bending wood method. Speechless...Just watch then subscribed.

@KeithJohnsonCustomWoodworking 5 ай бұрын

Wow, thanks! I greatly appreciate it.

@billm4560 3 жыл бұрын

Another great video! 👍🏻 I had to do some bending for a dining room table I just built! Had to bend the apron! Did it about the same way you did but didn’t soak the wood! Thanks for sharing!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Awesome! Wow, a bent apron for a round table sounds like a nice challenge, too! 💪

@hamb7260 9 ай бұрын

Just remarkable and outstanding workmanship. Every one of your calculated methods speak loudly of how great of a craftmanship you are.

@KeithJohnsonCustomWoodworking 9 ай бұрын

Thank you very much! I greatly appreciate the kind words 🙏

@bradmaxwell7930 2 жыл бұрын

Killer job Keith, beautiful...!!! Cool video as well...

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Thanks a lot, Brad!! Much appreciated 👊

@shinigamilee5915 10 ай бұрын

KZfaq suggestion was right, your channel is certainly worth watching.

@KeithJohnsonCustomWoodworking 10 ай бұрын

Thank you! 🙏🏻🙌🏻

@KianaShalix 2 жыл бұрын

I can only imagine the satisfaction of that completed table only to have to do another one! Great job on both!

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Thanks so much! 😊

@numerousid6478 3 жыл бұрын

Wow, what a spectacular piece of work! Loving it so much and I am addicted to your videos. Thank you.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you very much, Kyle!! So glad you are enjoying the vids! 👍🏻👊🏻

@MonChouMoiToi 9 ай бұрын

UNBELIEVABLE.. !! Congratulations (Not Sponsored), for your Art, Technique, Design and work. This is the fourth time in two years that I come back to ADMIRE.... never had enough. So I had to comment, at last...Thank you for letting us admire..

@KeithJohnsonCustomWoodworking 9 ай бұрын

Thank you very much 🙏🏻👍🏻

@Acheiropoietos 3 ай бұрын

Wonderful to watch & learn ❤ thank you. Nice SketchUp action too 👍

@KeithJohnsonCustomWoodworking 3 ай бұрын

Thank you! Cheers!

@thirumanik3510 2 жыл бұрын

What am I doing without subscribing to this channel? Man, you make it seem so easy!!! One of the best wood working channels!!

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Too kind!! Thanks so much!! 🙏🙌

@klausjuergen 3 жыл бұрын

Awesome work. And finally a table without a ton of epoxy!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you! If you see an epoxy pour on this channel, then I've officially sold out 😜

@andrebourque2165 11 ай бұрын

Really nice piece of work. Good for you for not losing your mind when the customer decided it was not what they wanted.

@KeithJohnsonCustomWoodworking 11 ай бұрын

Thanks Andre! Gotta be professional 😜

@1974jrod 4 ай бұрын

@@KeithJohnsonCustomWoodworkingwell I hope you got paid for it and didn't eat it.

@mrzoinky5999 11 ай бұрын

Fast and efficient presentation with a little humor thrown in - really good job

@KeithJohnsonCustomWoodworking 11 ай бұрын

Thanks a lot! 👍🏻

@hernan91 3 жыл бұрын

as always, this was freaking AWESOME!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

THANK YOU!! 🙌🏻

@gavinfeargrieve4874 3 жыл бұрын

Table looks fantastic. I've been on the fence about bent wood projects until now.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks Gavin!! It’s definitely a methodical process and things can still go awry, but glad to hear you are ready to give it a go. Good luck!

@sdoc3 11 ай бұрын

Love the shop cat!

@KeithJohnsonCustomWoodworking 11 ай бұрын

The best! 😺

@i-churchcafe9136 Ай бұрын

instructive and very well put together video!! thank you!!

@KeithJohnsonCustomWoodworking Ай бұрын

You're very welcome! I appreciate the kind words 👍😎

@kevinmorin7965 3 жыл бұрын

Thanks Keith, elegant work. Thanks for sharing your methods, techniques and overall design.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Very welcome! Thank YOU for watching and the kind words. 🙏👊

@drmkiwi 3 жыл бұрын

Nice work and design. Also, impressive looking laminations and grain matching on the centre post too. Thanks for the video. Cheers, David

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you David!! I really appreciate the thoughtful comment and kind words. Cheers to you as well! 👍🏻

@alanthompson4912 3 жыл бұрын

I don't know anything, but with how beautiful that center and bent wood looks, I almost would want clear acrylic, so I could see the workmanship below, nice job.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much! And I’m with you! A nice piece of glass would look pretty cool 😎

@shriramverma8816 2 жыл бұрын

Oooo.

@bedjobedjo2554 2 жыл бұрын

@@KeithJohnsonCustomWoodworking awal qqqql

@peterford9369 4 ай бұрын

Having been a carpenter for 35 plus years building homes and some furniture for myself and family, I sure as hell know you can spend many hours per piece of furniture or project, especially when each one is your prototype. Nice job by the way 👍. I never worked with too much quality dimensional lumber . Couldn't always afford it for personal pieces. So pine, cedar, fur, spruce and some hardwoods were my limit. .🤐. But, a little stain can do miracles.

@KeithJohnsonCustomWoodworking 4 ай бұрын

Well said! Thanks Peter.

@MY1PATH 3 ай бұрын

Your mold came apart really well after gluing. For added peace of mind you can also apply a wax and or spray on a coat of "Mold Release" Ha! you said paste wax a minute later in the video. Good stuff.

@KeithJohnsonCustomWoodworking 3 ай бұрын

😜😂👍🏻

@shilomangan9674 3 жыл бұрын

Out standing Job you have Inspired me to start working on Wood again just as soon as I'm able too. Keep the Videos coming.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

That is so fantastic to hear!! All the best, my friend 🙏👍

@bgcfurni-tech1045 3 жыл бұрын

Hey Keith today am uploading a video on wood bending, may be you can watch it and advice me better plz

@youtukang 3 жыл бұрын

Nice 😊😊🙏🇮🇩🇮🇩🇮🇩

@MrEsharp79 3 жыл бұрын

KZfaq recommended this to me. 45 sec in and I subscribed. Quality content!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Awesome! Thank you so much!! 🙏👊

@remytokouda9442 3 жыл бұрын

Same sentence !

@remytokouda9442 3 жыл бұрын

First time ever i subscribe...

@KeithJohnsonCustomWoodworking 3 жыл бұрын

@@remytokouda9442 Thank you very much!!

@vijaychauhan3995 3 жыл бұрын

Oy I Go oyu

@liquidrockaquatics3900 11 ай бұрын

I subbed when you said “yesss massster “ in an Igor voice. You’re my people

@KeithJohnsonCustomWoodworking 11 ай бұрын

😜😂 my man!!

@briturner11 11 ай бұрын

Keiths jigs look nicer than my finish projects. Someday I'll be as talented has him.

@KeithJohnsonCustomWoodworking 11 ай бұрын

😂 I tend to go a bit overboard sometimes. Thanks so much!

@briankappel6131 3 жыл бұрын

Tradesman to tradesman I really hope that client didn't ask for a deal on the "revised" size. Thanks for the effort you put into this video man, the bits of information I pick up watching stuff like this is very appreciated.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks for watching and the kind words! And the first one is up for sale. I'm trying to help them out. 👍 #karma

@TNRonin 3 жыл бұрын

@@KeithJohnsonCustomWoodworking what was the height difference on the two bases? Great job by the way! Subscribed.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

TNRonin Thanks a lot!! Difference was 3 inches.

@SmokeFlame1 9 ай бұрын

That is certainly a beautiful table. So well built and explained. It also brings back memories for me because the bending process was similar to what I did about 20 years ago. A friend of mine taxied his homeuilt aircraft into the side of a hangar door. The rounded wingtip was crushed. He and I made a template from the opposite wing and flipped it over to make a pattern. We used Sitka Spruce cutting 1/8 strips. It turned out beautifully. Of course it was not as thick as yours and the curve was not as acute, but after planing, sanding and recovering, the tip was perfect. He was flying again in short order. Thanks for your video. I really enjoyed it.

@KeithJohnsonCustomWoodworking 9 ай бұрын

Thanks so much for watching and telling your story! Bent lamination provides so many possibilities!

@yvonnehughes3036 2 жыл бұрын

You're funny! lol. Absolutely georgous!!... The table stand.... I'm going to shut up now lol

@KeithJohnsonCustomWoodworking 2 жыл бұрын

😂 Too kind. Thanks Yvonne!!

@user-cr3bo1hr9l 5 ай бұрын

That's beautiful man, I regret that I didn't follow my passion of woodworking as a career. I still build things like book shelves, wall units and picnic tables but I've never had the space to do it properly without creating an annoyance for my neighbors so I live my passion vicariously through craftsmen like you on KZfaq.

@KeithJohnsonCustomWoodworking 5 ай бұрын

Thanks very much! Glad you enjoy the videos.

@user-dj6yf2ft8k 11 ай бұрын

Just amazing! Thanks for sharing your projects! Please don't stop :). What beautiful craftsmanship! fantastic job on that piece ! .

@KeithJohnsonCustomWoodworking 11 ай бұрын

Thank you very much! 🙏🏻😁

@henrydiaz720 8 ай бұрын

Mamafumpin' rock star! I'm gonna use these principles for guitar building.

@KeithJohnsonCustomWoodworking 8 ай бұрын

Awesome! Yes! 🤙🏻 🎸

@svenamundsen7958 3 жыл бұрын

Watching this "again"...learning so much. I have to try and make one of these tables but with either mahogany or walnut as you did and will attempt to make a table top out of either wood.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Fantastic!! Good luck and have fun!

@jivanildomiranda2010 3 жыл бұрын

Thank you for sharing your knowledge with us. I love the mood of your videos: professional and funny at the same time. Cheers from Brazil!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Many thanks! Glad you like them!! Cheers!

@cuervojones4889 9 ай бұрын

That walnut is just beautiful! I know it's no longer popular, but I still LOVE it!

@KeithJohnsonCustomWoodworking 9 ай бұрын

Thank you! And walnut is more popular than ever right now 😎

@luisalonsodominguez2958 3 жыл бұрын

Increíble trabajo, trabajas con una precisión impresionante, tus máquinas son geniales..... Un saludo desde Mexico!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Gracias!! 👍 🙌

@jeffreyfitzgerald8541 3 жыл бұрын

I don’t dare show this to my wife or she will add this to the list of things I’m not yet qualified to build. Very cool Bubba

@KeithJohnsonCustomWoodworking 3 жыл бұрын

😂 I have a long list of wife projects I've yet to get to as well...😜

@romaness2553 3 жыл бұрын

Just amazing! Thanks for sharing your projects! Please don't stop :)

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you! Will do!

@madeiraforte 2 жыл бұрын

nice nice Hello friend, it was very top, my congratulations, I'm from Brazil and your video arrived here

@KeithJohnsonCustomWoodworking 2 жыл бұрын

🙏🏻👍🏻😎

@LEAMETAL666 3 жыл бұрын

What a masterpiece, 😍😍 Congratulations!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you very much!!

@reggie7250 3 жыл бұрын

“A stack of plywood goodness”. 🤣😂 Great vid!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

😁 Thanks a lot!! 👍

@mrector23 3 жыл бұрын

Your videos are so well rounded with so many different techniques. It’s just a good time watching them with a beverage in hand.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you! Cheers!

@ryanjuarez6908 Жыл бұрын

Finally made it around to watching this video after hearing about it on the Shop Sounds podcast almost a month ago. Love the table and watching the build.

@KeithJohnsonCustomWoodworking Жыл бұрын

Awesome! Thank you! And thanks for listening to the podcast - we super appreciate the support!👊

@rodneydemars8359 3 жыл бұрын

Brilliant work as always!!!!! And thank God you got over that laryngitis or whatever the hell it was that kept you away from your hilarious voice overs in the last video!!!🤣🤣👍🤟🍻 keep the videos coming!!!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you! Gotta mix it up sometimes and see what sticks 😜👊

@andri041 3 жыл бұрын

Hi. I am a wood-technician, that works in a firm which makes furniture, and I must say you are the first woodworker on KZfaq that I would consider professional. Your work is great, detailed and precise. You don't use hobby solutions for joints and details, you use something similar to what woodworking firms use. So great work and carry on making great projects.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Wow, thanks! Your kind words are very much appreciated! Have a great day!

@StevenJamesPorter 3 жыл бұрын

There a thousand woodworkers on KZfaq who do nothing but crazy joinery and sound furniture building. I find it hard to believe this is the only channel you would consider professional..

@andri041 3 жыл бұрын

@Steven James Porter I don't watch many woodworking youtubers. And he really was the 1st I would consider professional. Of course there are others that are also professionals, but he is just the first one of the ones I watched. P.S: Making crazy joints doesn't mean your a professional woodworker. It's the way you make them and the techniques you use, and many KZfaq woodworkers lake those qualities.

@mrector23 3 жыл бұрын

@@StevenJamesPorter - Interestingly enough I actually have to agree with Andrej. There are a lot of “content creators” who use wood to make KZfaq content, but who aren’t professionals. Professionals are focused on design, efficiency, and customer focused final product. Most of the other wood workers are selling 10,000 chairs to 10,000 hobbyists, where Keith is sharing his contracted work with the audience.

@drixdalebugtong7804 3 жыл бұрын

Nice having a complete machine for furniture bro you can make every design you like.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Only limited by time!! Can't buy that! 😜 👊

@padgit8r486 3 жыл бұрын

Wow, twice.... that is a beautiful build.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks very much!

@neredrego 3 жыл бұрын

Ith all those hours of footage, I'd say your editor needs special mention. Loved the video, your humour came shining through.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much! All done by me...building, filming and editing. 👍🏻

@garrettsoto1667 3 жыл бұрын

Impressive!

@neredrego 3 жыл бұрын

@@KeithJohnsonCustomWoodworking you have a talent.. And not just for woodworking

@KeithJohnsonCustomWoodworking 3 жыл бұрын

@@neredrego Thank you sir!!

@ahmadalhellu 3 жыл бұрын

Lovely table, nice skills. I would love to see this table done in regards to the arches in feathers shapes as a contentious flow for both ends " feat and top" !

@jamesbearden17 3 жыл бұрын

Slits

@jamesbearden17 3 жыл бұрын

Splits Pornography

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you!! And yes, that sounds like it would be a very unique table 👍

@vladtyb9487 2 жыл бұрын

Winner of a video, I've been looking for "free christmas wood craft projects" for a while now, and I think this has helped. Have you ever come across - Yanathew Wood Waggler - (should be on google have a look )? It is an awesome one off product for building amazing sheds and your own wood work projects without the hard work. Ive heard some incredible things about it and my m8 got cool success with it.

@thelifearchitect 3 жыл бұрын

This right here is exceptional! Amazing work, Keith!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Too kind!! Thank you so much!! 👊🏻 🍻

@truechristopherbond7116 8 ай бұрын

I found your candid humor delightful... you earned my subscription. Keep up the great work.

@KeithJohnsonCustomWoodworking 8 ай бұрын

Thank you sir! I greatly appreciate that 🙏🏻😁

@lauramarshall6376 3 жыл бұрын

What a beautiful piece! I'm a newbie and this gives me something to aspire to. And your cat is gorgeous!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you so much, Laura! And welcome to the craft! 😺👍

@zombieno1 3 жыл бұрын

Subscribed because of the cat. Also what happens to the too tall table?

@KeithJohnsonCustomWoodworking 3 жыл бұрын

@@zombieno1 Thanks very much. The other table was sold.

@designer-garb572 3 жыл бұрын

This video is like a Rolex, a really good watch!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

😂 Thanks for watching! And I appreciate the pun! 😉

@marcosreis5879 3 ай бұрын

I´m from Brazil. Congratulations. What a excelent wood work, hope that i get expertise to do it in someday!

@KeithJohnsonCustomWoodworking 3 ай бұрын

Thank you very much!

@UC1101 3 жыл бұрын

Whoaa...black walnut really is beautiful...and your work is amazing. Good supervision Mr. Cat!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you very much! 🙏👍

@Billahori1 3 жыл бұрын

Dude, that was amazing. Beautiful craftsmanship !!! I hope your family enjoys that table for hundreds of years to come.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much!!! I super appreciate that! 🙏👊

@ben_mkiv 3 жыл бұрын

perfect woodwork, the result is a piece of art :) (after watching several other channels this is a breeze to watch, there wasn't a single moment where i thought "oh no, better don't do it this way", kudos for that)

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Awesome! Thanks so much for watching and the comment. I appreciate the feedback! 👍

@usatnagesh7010 3 жыл бұрын

@donaldcotnoir1865 2 жыл бұрын

Who gives this a thumbs down? People that have no clue what went into making this piece of art. Absolutely beautiful. New subscriber.

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Thanks so much for the sub and the support, Donald! 🙏🏻👊🏻

@Sonia-ju6po 2 жыл бұрын

AWESOME IN EVERY WAY!!

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Thank you!! Thank you!! 🙏

@user-qg6fy4yp8t 3 жыл бұрын

Beautiful executed and made!!! Good editing ( laugh a lot)!!! Well explained along the process!!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Glad you enjoyed it! I really appreciate the comment and the feedback 🙏👍

@davecurda2350 3 жыл бұрын

I just subscribed. Man I really love the look of this table base great job. Now I’m going to binge watch your other videos.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Awesome! Thank you Dave!! More videos on the way!!

@garrettstephens8168 3 жыл бұрын

This channel is amazing! Excited to see more of your work :)

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you so much! More to come!! 👍 🙌

@benengelke9841 7 ай бұрын

Wow. Fantastic work & attention to detail! Thanks for explaining and showing your process.

@KeithJohnsonCustomWoodworking 7 ай бұрын

Thanks for watching, Ben! Glad it was helpful.

@tonycorleone3739 3 жыл бұрын

Excellent work, gorgeous base. I wonder if you can make a video every week, it's really satisfying to see how your jobs turn out and how you fix your mistakes. Many carpenters often hide errors in their videos. So go ahead and great success from the UK.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much, Tony! I would love to make a video per week, but unfortunately I don't work that fast and filming extends the length of a project almost 3-fold, so there isn't always time in the schedule to film every project.

@serviceelectromecanique190 3 жыл бұрын

nice one no one show us that little gaps except you loool

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Gotta keep it real!! 😜

@Maffy0Bear 2 жыл бұрын

Top Notch. I learned a lot!

@KeithJohnsonCustomWoodworking 2 жыл бұрын

Awesome!! Thank you 👍🏻

@rubiomonocoatusa 3 жыл бұрын

Educational and entertaining as always! Awesome job Keith!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks so much! Another successful Rubio application! 😜👊

@ericklavins1866 3 жыл бұрын

Inspiring! I'm stoked to go make something now.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Fantastic!! So happy to hear that, Eric! Get after it!! 😉👊🏻

@youtukang 3 жыл бұрын

Yess informatif desaign

@joshuahasson9687 3 жыл бұрын

New sub here, I love your video! Can’t wait to binge some more. Where have you been all my woodworking life?

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Welcome aboard! Thanks so much for the comment. More videos on the way! 👍

@lemmontree1 2 жыл бұрын

A Master at work!

@KeithJohnsonCustomWoodworking 2 жыл бұрын

🙏👍😎

@danielmurdoch2625 11 ай бұрын

Watching this helped me to figure out how to do the back of my steamboat wood surface. Great looking table!

@KeithJohnsonCustomWoodworking 11 ай бұрын

Oh awesome! Glad it was useful. And thanks for the kind words! 👊🏻

@Joe___R 3 жыл бұрын

That is a great looking table base. I hope you charged your clients for each base you made since it was built to the agreed upon measurements.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thanks Joe!! Things always have a way of working themselves out 👍

@keithspencersr.6806 3 жыл бұрын

Blossom of walnut table, maybe a good name, great job, beautiful grain.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you sir!!

@BruceAUlrich 3 жыл бұрын

1:45 Igor! ha ha. That is one beautiful table base! The curves are just mind-boggling!

@KeithJohnsonCustomWoodworking 3 жыл бұрын

😂😆 Thanks Bruce!! I may have a spare one for sale if you're interested 😉😜

@joelmorissette528 3 жыл бұрын

Great video. Amazing craftsmanship!! I appreciate that you gave tips/tricks without being condescending. You showed off your skills, but without bragging.

@KeithJohnsonCustomWoodworking 3 жыл бұрын

Thank you very much! I really appreciate the feedback as well. That means a lot. 🙏