When I use a split die I put the split under the middle setscrew tighten that to hold the die open, the secure with the two outside screws. After that operation I then back the centre screw out and retighten the outer screws to cut the true thread size
@myharris3 жыл бұрын
Nifty little tool. This channel's costing me a fortune!!
@cschwad5593 жыл бұрын
Me too!
@blic-sx9ix3 жыл бұрын
You are a machinist. Make it yourself! I made mine from 4" length of 1 1/2" round stock center bored to slide over a 1/2" rod chucked in the tailstock drill chuck. It has a different dia. on each end to hold 2 different die sizes. I made mine with a short handle so I can feel the pressure of the cut and let the tool spin when I finish the thread. I don't have to worry about stopping the lathe in just the right place. 3/8" would be the biggest size I would use this tool on.
@johnalgar47473 жыл бұрын
Don't worry - I love to see the "simple" things as they're so useful, and maybe wouldn't be thought of otherwise. Thank you.
@zuke-ci4vd3 жыл бұрын
A cup of coffee with breakfast and a Keith Rucker video! A great way to start the day!!👏👏👏😎👍🛠
@theoroma68833 жыл бұрын
I really enjoy your narrative and the quality of your work. I am not a machinist, never used a metal lathe and as such I am in awe of the methematical prowess it takes. Unfortunately I am 73 so cannot now change careers. I have had my turn. Keep up the excellent videos.
@millomweb3 жыл бұрын
where abouts are you ?
@larryschweitzer49043 жыл бұрын
73 is not all that bad of a point to start learning something new. That's the age I was when I bought my lathe. I also have a mill and tool grinder. Between the 3 of them they provide plenty of mental challenges to keep me active. I repair things and make stuff just to see if I can.
@millomweb3 жыл бұрын
@@larryschweitzer4904 I guess my dad wasn't far off that age when we got the milling machine.
@billhartl66013 жыл бұрын
Thank you, I very much appreciate learning the simple things that can be done on a lathe. I don't have a lathe yet and have never used one but the more I watch you the more of an itch I get
@johnswimcat11 ай бұрын
As the book that started me off said "Lathes are great". The lathe really is the fundamental machine tool and there are so many things you can do with one.
@bobbyanderson62723 жыл бұрын
Thanks Keith. I'm glad you went ahead and made this one. It answered several questions for me. One, I have long wondered about running a thread die backwards -- didn't know if there was some mysterious reason why you shouldn't.... Also, I want to shop for one of those devices, like you have. Always love new gadgets. Thanks for all your good videos. You always get an A+ in my book. Bob (Jacksonville, FL)
@Kilticstudios13 ай бұрын
Thanks man! Have always been curious as to how they work. You’re the man!
@googacct3 жыл бұрын
I bought one of those a few months ago to do something similar. It worked quite well. If you are ordering one, be aware there are non-floating and floating types. Like Keith, I had bought the floating type.
@patrickboyd64863 жыл бұрын
Thank you for the video Keith you showing me a new trick for the lathe and I found a company in Victoria Australia who sells that item.
@leeroyholloway42773 жыл бұрын
I have a floating die holder that can be set to "outrun the key" at a given depth and freewheel, eliminating the need to stop the lathe.
@nightraidone97683 жыл бұрын
If you want to thread to a shoulder the easiest way ist to remove that pin, on such small thread you can just hold it by hand, as far as I know they are designed to be used by hand most of the time
@iteerrex81663 жыл бұрын
It's cool jig. Simple enough to make one real quick. Thanks Mr Rucker.
@robertnoonan49533 жыл бұрын
This video was very timely for me, I am doing an almost exactly the same thing but on 8 short bars with a thread on each end. I rigged up a dodgy spring feed to get the die to start which worked most of the time (the spring had other ideas on one of them). I was also concerned that my threads did not reach the shoulder but seeing how you reversed the die allayed my fears that I would damage it, so now I am off to the shed to make my amateur job look like a professional one thanks to this video. Regards from Australia, Keith.
@GeorgeWMays3 жыл бұрын
Very cool. Great way to start the week. Thanks for the project. It is certainly appreciated.
@donswords667111 ай бұрын
Holy smokes that cut-off saw certainly did the job cutting that little stick. 😆😆 Thank you for the video! :-)
@kurtkrause7151 Жыл бұрын
Loved it. Thanks for the 'look' at the floating holder!!👍
@elsdp-45603 жыл бұрын
THANK YOU...for sharing. Nice lathe accessory.
@craigywaigy47033 жыл бұрын
I once had to make a floating, adjustable and telescopic handled die holder(allowing both machine and manual control as sprungd handles extended to allow hand torque application) as an apprentice to get my first job in a machine shop as a novice!! I also had to design it too! Turned out well and the shop paid me the equivalent of an over the couter cheap die stock - Loved the job for 18months, and the experience/knowledge, but my bad back(ciatica) hated it, even with duck boards!!! Ps. Threads to a shoulder are best done in reverse screw threading, as you can get the form nice and tight, all the way to the shoulder(no die lead ins, etc). Keep on, keeping on.......
@CatNolara3 жыл бұрын
Even with this I'd add some thread relief, so you avoid having those half cut threads right next to the shoulder. That way you can screw anything right up to the shoulder without it jamming. Not sure if running the die backwards could damage it. Either way some relief would be recommended.
@garys96943 жыл бұрын
You're right, if you notice he still didn't get the practice nut up to the shoulder. That tool was very extensively used in the screw machine business when the machines were actuated by cams. I know because I'm of that age and older than necessary to have used them. My dad who was in that trade for many many years was totally very familiar.
@milantrcka1213 жыл бұрын
Did you see the hand-die finish?
@garys96943 жыл бұрын
@@milantrcka121 Yes, he was correct in using the die the way he did, but he still couldn't get the practice nut all the way up to the shoulder. He should have machined a small relief groove just before the shoulder to allow the nut to go clear to the shoulder.
@neiljensen95853 жыл бұрын
dont forget he cut a small chamfer on the shoulder,so he probably was getting the nut to bottom out. Ive used the same process with no problem
@peterparsons32973 жыл бұрын
i call it a tailstock die holder, i made one a while back, nice little project
@c0mputer3 жыл бұрын
Most tailstock die holders don't float or slide like this one. They just hold the die rigidly so you advance the tailstock manually or unlock the tailstock a bit so it can slide. If you made the floating kind that's pretty cool, I might give that a try.
@peterparsons32973 жыл бұрын
@@c0mputer yep as you say a floating one, just my name for it i turned a Morse taper for the tailstock rest turned down to 10mm so the holder can slide on it, don't use it much as i prefer to single point threads. but its handy for little stuff
@johnswimcat11 ай бұрын
Useful video. I have to do this job and have bought a tailstock die holder. Thanks Keith 😊
@AllThingsMech3 жыл бұрын
Making one of those floating die holders will be on my short list for sure when I get my lathe set up again. I don't understand some people's fear of and/or distaste for single point threading though, honestly. It's one of my favorite operations on my lathe! Granted I was a USAF machinist so that was a huge part of our day-to-day routine, but still...the average home machinist can easily do it with very little practice. Grab a machinery's handbook and a chunk of scrap aluminum and give it a whirl. It's a really fun process.
@samec882 жыл бұрын
I very rarely single point anything due to cba messing with change gears. my big lathe uses a quick change gearbox so when thats up and running Ill do a lot more thread cutting
@AllThingsMech2 жыл бұрын
@@samec88 I can totally understand that. My Logan lathe started out as an 1805 (change gear machine), and single point threading can be a royal PITA when you have to rip the whole gear train apart to set it up correctly for one single operation. I ended up adding a quick change gearbox (and changing out the lead screw, carriage assembly, support bushing, etc to make it all work - essentially converted it to a model 1815) and now threading is a much easier process, as is dialing in different feed rates. Wasn't a cheap or easy way to go because I spent nearly a year searching for all of the parts to do it poperly, but 100% worth it for the massive increase in usability.
@geckoproductions41283 жыл бұрын
Production tip: use single point threading method to get threads exactly where you want them, then use die to quickly cut last few thousandths to proper depth.
@zenoelea82393 жыл бұрын
Nice little easy to watch video. But also love the 30-40 min project videos. 👍
@mkegadgets43803 жыл бұрын
This would be a great future project for you to make...
@tedmckay3 жыл бұрын
Hi Keith, nice job. It can be even easier by not moving the tail stock and just letting the die holder move back and forth. You may have a reason for not doing that so I will apologies in advance if I missed something.
@cavemaneca3 жыл бұрын
It's just one of those benefits of being a machinist for so long, you've got all sorts of tools that make certain jobs just a little but easier. As for people looking to get one of these for their own shop, it's probably an easy enough job to just make one.
@CraigLYoung3 жыл бұрын
Thanks for sharing!
@jukeman573 жыл бұрын
I think that is such a good idea. Handy tool. I think especially for small threads.
@dean-gm1lg2 жыл бұрын
Coventry die box makes a good job of threads
@t3cker2543 жыл бұрын
I'm used to those holders, just without that locknut. U have to hold it by hand, yea a bit of force is needed, but u can't break sth when going right to the shoulder
@sircaran3 жыл бұрын
Oh that makes sense, I got a bunch of machinist tools from my Grandfather and there were 2 or 3 of these in there and I couldn't figure out what they were for lol (edit: mine are tap holders)
@JimRodgersWoodturner3 жыл бұрын
Keith, I checked a number of the regular suppliers and did not find anyone who carried a similar device. However a somewhat similar version was listed on EBay. This might make a simple and interesting project for a future video!
@Andrew-so3vj3 жыл бұрын
Big thumbs up to you Keith. But no need to go to eBay for one of those tools - I used 10 minutes to make my own years ago, and it does an excellent job. Being double sided, it uses both common sizes of dies, just like the one Blondiehacks made recently.
@pitpuppies3 жыл бұрын
I made my own to
@carrollprice12139 ай бұрын
Single point threading up to a shoulder is risky because if you allow the cutter to contact the shoulder by being late disengaging the half nut, disengaging the half nut is difficult and could damage the half nut.
@richardsurber8226 Жыл бұрын
That's pretty nice. I probably at some point wish I knew I could turn the die around to finish a short thread
@dan-o97463 жыл бұрын
Nice tool. Thanks for showing. Enjoyed it
@michaelshinn1623 жыл бұрын
They call it a lathe tailstock die holder. Available on amazon and mcmaster-carr.
@gregbentzinger82633 жыл бұрын
A necking undercut would save the time needed to recut the bottom of threads with the die reversed. I use a spring loaded tension compression type in the CNC lathe to do longer small threads and not have to fight part deflection - like a #8-32 thread 1½ long.
@jackgreen4123 жыл бұрын
Interesting. I work at a production shop that rolled the threads instead of cutting. Kinefec was the name if I remember.
@keithmonarch4473 жыл бұрын
Hi, Keith from Keith. I certainly like this floating die tool, never seen one. But it handles, the tourqe for quick threading, a very nice feature 👍.
@Caughtitoutdoors3 жыл бұрын
Great demo
@WACRE443 жыл бұрын
Thanks so much for your vlogs was great fun
@StreuB13 жыл бұрын
Die drivers are a great tool! As long as you don't run the die into a shoulder. Ask me how I know. LOL Thing go sideways REALLY fast when you do and it tears things up bad. One plus about single pointing, you might break the insert and tear up the part a little but you'll be OK otherwise.
@staciedziedzic87063 жыл бұрын
Hi it’s Stacie! Awesome video! Something new to watch! Hope all is well!
@infoanorexic3 жыл бұрын
The Shed Dweller prototyped an automatic thread tool retracting device for single pointing at high rpm. Well worth looking at. So are his other tool builds. Big Mona(rch) is looking kind of lonely. Hope you can showcase her at work sometime soon.
@johnfriend2403 жыл бұрын
Mine doesn't have the key; you hand hold it from spinning. You can go a bit faster and when you hit the shoulder you just let go, or if it grabs you can just let go. Probably better for 1/4" or below. It does have a Tommy bar if you can't hold the knurl by hand for larger sizes.
@Stefan_Boerjesson3 жыл бұрын
Interesting video. Die threading the way the die is made for I know. Turning the die "backwards" to make some more threads I've seen a number of times. However some reputated Tuber, don't remember who, pointed out that the die usually/normally/???? doesn't have any edge for cutting that way. It obviously work..... Comments from people knowing more?
@sidshel44283 жыл бұрын
is it important to use thread relief.
@johnquinn38993 жыл бұрын
Thanks Keith. Interesting as always
@paulbeijer3413 жыл бұрын
The part that was supposed to be floating wasn't floating with the first side. It pulled the morse taper out instead and the tang was keeping it from rotating.
@michaelsanzo58673 жыл бұрын
Was it my imagination or did the piece spin in the chuck when you got the die down to the bottom?
@B5Blue19682 жыл бұрын
Nope, it spun a little.
@muman543 жыл бұрын
Kinda reminds me of the Flex Arm. Very cool video.
@Skyryder473 жыл бұрын
You got it right, Keith. $42.00 - $72.00 on Amazon. I just did a search for a floating die holder and ended up with a full page of them on Amazon. Ed
@catfishgray36963 жыл бұрын
GREAT JOB, GREAT VIDEO, [ BACK TO WORK ]...
@hemipatton7799 Жыл бұрын
I'd KILL to have that type threading attachment to my tailstock to my Unimat as the Unimat Lathe is belt driven NO half nut or thread cutting gears to make it single point thread! SO, I'm JEALOUS! I MAY make a tailstock attachment to do just what this bigger version does, seems pretty straight forward to make, to fit my mini machine!
@dinotom13 жыл бұрын
Thanks Keith, ((-: and even funnier, I just bought a floating die holder for the 10EE
@user-od8cn5zx2x10 ай бұрын
If the customer specified a half an inch why wouldn’t you bother to go exactly a half an inch? It’s just possible the customer knows what he’s talking about.
@billprudehome93043 жыл бұрын
Is there a reason you don't provide a relief groove for the thread?
@garvintools63172 жыл бұрын
great
@jasondevault50663 жыл бұрын
This was awesome
@DolezalPetr3 жыл бұрын
I learned something, thanks
@restodrood20593 жыл бұрын
Interesting that he does work for other people while constantly apologizing for how long it takes for him to work on his own stuff (which is what the channel is about).
@paulcopeland90353 жыл бұрын
Go away. Quit trying to start shit.
@sidshel44283 жыл бұрын
when do you use the metal saw and when would you use a band saw or a big one like abom79 with coolant. what are the plus and minus of each way . ps thanks ahead of time
@bigtrev8xl3 жыл бұрын
Oh dear, it looks like all the ol' grumpy's are out and about today,....you'll complain even more, when those who put their videos on youtube, decide that it's not worth the grief.... and there is always more than one way to skin a cat.
@markstock35103 жыл бұрын
why did you not let it float, you wound the tailstock in and when you reversed it you munted the threads
@terry61313 жыл бұрын
I hope ToT is watching this, he can make one for us to follow and replicate.
@ke9tv3 жыл бұрын
I think he made a tailstock die holder once.
@Th3Su83 жыл бұрын
Here... kzfaq.info/get/bejne/i5-mZ6l5xqezlJs.html Not ToT. But same concept
@terry61313 жыл бұрын
@@Th3Su8 Great link, thanks :)
@jpsimon2063 жыл бұрын
If nothing else, the monarch deserves it
@ke9tv3 жыл бұрын
My shop teacher said if you're threading to a shoulder, you should take your thinnest parting tool and undercut a little thread relief. (And if you're not cutting with a die, he said to put the lathe in back gears and thread outward - less opportunity for drama). I'm sure you know more than my shop teacher, though. (And you surely know more than I do!) So where have I gone wrong?
@fengelman3 жыл бұрын
but what advantage does the "float" give you in this application?
@johnscott28493 жыл бұрын
Not all lathes have a brake.
@geraldwilcox24273 жыл бұрын
Love all the videos. just wondering if there is any thing new on the stoker engine.
@douglasthompson27403 жыл бұрын
Problem today seems to be every time I buy a die it comes in a different shape and sized circumference. Some of the smaller sizes are ridiculously small outer diameters. I have to have a drawer full of adapters and even then it seems I often don't have the right one..
@fernandofert99603 жыл бұрын
Why are you shanks glittering?
@dannirr Жыл бұрын
Nice but you didn't use the floating feature - you used the tailstock to move the die.
@wk70605 ай бұрын
The thread finish is rough compared to a single point thread.
@MrYukon20103 жыл бұрын
Obviously off topic but I don't think the phrase "rpm's" is correct assuming you mean rotation(-s) per minute.. Everything above 1 rotation per minute (the "rpm) should be named rotations per minute or r'spm (to be pronounced as 'arspee-em).
@utooobur3 жыл бұрын
Somebody help me here. It appears to me he was not taking advantage of the pinned slot when he was manually feeding the die with the tailstock. It's very obvious he was doing this as the pin stayed in it original location the whole time and you can see the tailstock being hand wheeled in. What's the purpose of using a "floating" tailstock die holder if you are going to manually feed the die. Also I thought from Keith talking up the short distance and the shoulder that the die holder would free spin when it hit the shoulder. I didn't see that advantage when it hit the shoulder and spun the work piece. Couldn't see how it would do that either. Operator still had to be concerned with the die crashing into the shoulder.
@jimthesoundman86413 жыл бұрын
7:05 Did you have the lathe jaws loose so it would slip when the die bottomed out? How did you get it tight enough so it would cut but loose enough so it wouldn't break the die?
@melgross3 жыл бұрын
I get a bit nervous about these die holders. Even if you can see exactly where the front edge of the die is, most machines don’t stop immediately. They don’t have that brake. If not, the die will pull in after you stop the machine, and it will crash. Unfortunately, it’s impossible to determine how much the rotation will continue. It depends on the speed, material, the diameter, the threads, etc. So turning the lathe by hand is still required. I like floating die holders that themselves turn so you can do it manually.
@frenchcreekvalley3 жыл бұрын
That stock was still 0.508 after you cleaned it up, wasn't it? What if the customer actually had a 0.500 or .503 hole? I know that, when I buy some tool steels (S1, for instance) that they make it about 10 thou oversize to allow for for decarb, but I wouldn't think you'd need that for this job.
@whodom3 жыл бұрын
Keith- have you got a bearing going bad or something similar on that lathe? It sounded kind of harsh on the video.
@EmptyPocketProductions3 жыл бұрын
Notice how the whole unit spins in his tailstock slightly ? Likely scoring his tailstock taper.... seat it harder maybe ? Hope you have MT taper reamers
@steveallarton983 жыл бұрын
That’s because Keith machined the shank to dead size, instead of a little undersized - generally aim for 80 % of thread depth to reduce cutting torque to a more reasonable figure. Check tapping drill sizes for confirmation of what I’m saying !
@jonasbruzas26516 ай бұрын
where i can buy?
@aceroadholder2185 Жыл бұрын
Keith has made a mistake in his threading operation. To be fair, it is a mistake most people make. If you look in your favorite reference book you will see that the major diameter for a 3/8"-16 thread is NOT 0.375" . The major diameter of all 60 degree threads, metric or inch, is less than the nominal diameter. This matters because if you thread from the nominal diameter then your Go-NoGo gage won't go onto the work even if the pitch diameter is correct. The crest of the thread will be interfering with the root of the thread in the gage. Running a threading die over the work obscures this fault. But it does make the die noticeably more difficult to run onto the work because it has to cut the full thread profile. If single pointing a thread what happens is that if doing general purpose work and using the mating part for a gage instead of thread wires or Go-NoGo gage you end up with a sharp crest by the time the parts will fit up. Then when you de-burr the thread your nice fit suddenly is sloppy because you've cut the pitch diameter undersize.
@WilliamTMusil3 жыл бұрын
Hiya Keith
@michaelmarzella5460 Жыл бұрын
well it's a lathe kzfaq.infoUgkxN9zrzkkhnjUF5PQbuA_B1gYdsfCu9k6z but it wasn't what i would have anticipated. Headstock, tailstock, carriage apron are manufactured from aluminum now not cast iron. The spindle diameter for the bearings is too small allowing for a few play in the spindle so I am using some blue Loctite to take out the play.
@samuraidriver4x43 жыл бұрын
Why not reverse single point thread it when it's such a short thread? It's also a nice beginner project to make one on the lathe
@tsmartin3 жыл бұрын
That's how I would do it. Turn the thread tool upside down ... reverse spindle and thread away from the shoulder. Less crashes that way.
@garybrenner62363 жыл бұрын
What ever happened to the Stoker Engine?
@joopterwijn3 жыл бұрын
😂 well I got the di,... now only a lathe and the tool holder...
@pijnto3 жыл бұрын
I have one, probably me doing some thing wrong but in my opinion it is next to useless only two out of ten threads ever cut successfully.
@Hoaxer513 жыл бұрын
pijnto, it would keep the die square and true to the pieces that you’re cutting threads on, wouldn’t it? How did it not cut right for you? Just interested in the subject.
@BillyTpower3 жыл бұрын
wow what a novel idea
@oldschool19933 жыл бұрын
Easier to do with a regular die holder, then all you need to do is turn the die holder around to thread up against the shoulder. Notice your lathe motor has a really long wind down before you can reverse.
@mayshack3 жыл бұрын
How on Earth is using a die cheating? That must mean using a tap is cheating too. I would love to see you make a ¼" 20 nut by single point internal threading.
@edmundjacobsen50493 жыл бұрын
The number is zero a letter is oh
@harryhino22673 жыл бұрын
"Clickspring" made one of these a few years back. See kzfaq.info/get/bejne/g9N3rd2Lqqy3eok.html His design double ended (different sized dies in each end) but does require a bit of machining to make. Still, if you have a lathe......
@allredtail3 жыл бұрын
Your slide didn't work. The tool was coming out of the tail stock.
@OCT5663 жыл бұрын
I had to go back and watch it again, your right
@kevinreardon25583 жыл бұрын
I don't see the advantage of using that tool compared to a normal die.
@paulteirney35873 жыл бұрын
Please do not use your palm as a hammer as it will damage the nerves in the hand. Just use a pipe on the tee wrench.