These Will Save My Parts

Рет қаралды 1,086,009

Күн бұрын

Most of the time I use the 4 jaw chuck on the lathe, I also use some makeshift soft jaws to protect the part finish. But my shoddily thrown together jaw covers look like an afterthought and don't necessarily give me the warm fuzzies that I like to have when using my tools. So today I’m spending way more time than necessary making something that will look a whole lot better. I guess they will work better too… but mostly they will look nicer.
#inheritancemachining #machineshop #hobbymachinist
Get the drawings for this project here: inheritancemachining.com/?pro...
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch: inheritance-machining.mysprea...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
TIMESTAMPS
0:00 Intro
1:04 Gelatin
3:21 Square Dancing
6:26 This Part Is Boring
8:32 Consumables
11:56 Stress Concentrations Galore
13:31 Abracadabra is Matrix Algebra
15:25 Rounds?
16:50 How 'Bout Rounded Rounds?!
19:45 Lathe Lovin'
21:15 Was It Worth It?
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• These Will Save My Parts
© 2023 Inheritance Machining, LLC. All Rights Reserved.

Пікірлер: 1 700

@LordViktor299 8 ай бұрын

Thank you so much for showing me how to be better at my job. My trainer has noticed an improvement in workmanship and gave me an 'atta-boy' I pass it on to you. Thank you my man.

@NorroTaku 8 ай бұрын

thumbs up from me 😁👍

@DesertPunks 8 ай бұрын

Great work man

@Dirkadew 8 ай бұрын

An atta boy instead of a raise 🤦‍♂️ Should have told your boss you atta pay me more 😂

@peterfitzpatrick7032 8 ай бұрын

@@Dirkadewwhen you're being educated, you don't need to look for money from your educators too... the money will come in due time... lets not be greedy when we're only "half-baked"... Congrats to the OP for going out there to learn...the process can be the reward... 😉 😎👍☘🍺

@jakubkalka8360 8 ай бұрын

As much as the amazing examples of craftsmanship in these videos are inspiring and educational, no improvement would be possible without your own effort! Hats off to you for putting in the work to improve your skill!

@mx_nana_banana 8 ай бұрын

“remember kids, the best type of kill is overkill”

@NorroTaku 8 ай бұрын

if you come for the King you better don't miss and you have to go all the way

@VegasEdo 8 ай бұрын

Absolutely love the journey of making a part in order to make the next part and the culmination of using all the parts to make yet another part.

@AK-yw9qs 8 ай бұрын

😜😜

@t3chno0 8 ай бұрын

Side quests 😛😛😍

@oculicious 2 ай бұрын

It's the true meaning of the channel name, the machines are for whoever inherits the workshop :b

@urjaman0 8 ай бұрын

That self-made rounding form tool on the mill was seriously impressive (and something I hadn't even considered). And it also worked amazingly well.

@InheritanceMachining 8 ай бұрын

Thanks! I have no idea where that idea came from but not it's part of the arsenal!

@stevebabiak6997 8 ай бұрын

@@InheritanceMachining - typo spotted: I think “not” should be “now”

@stevebabiak6997 8 ай бұрын

@@InheritanceMachining - feel free to fix the typo if it is one; and then you can delete my comments.

@TomoHawKzZ 8 ай бұрын

It's a pretty old school make do method, but it's definitely valid

@ravindrareddy8536 4 ай бұрын

This workmanship is really the best I have seen, what a man!

@JasonOvalles 8 ай бұрын

14:30 As a math teacher, this made me so happy to see! Also, you don't necessarily need a graphing calculator for the matrix multiplication. You could use something like Wolfram Alpha for example!

@_D_P_ 8 ай бұрын

I didn't have either in high school. Had to do matrices on a regular scientific calculator.

@Dirk-Ulowetz 8 ай бұрын

You don't need anything of these. You only have to know one number. 1.414. 1.413 × 1 414 = 2 In Germany it is called Wurzel 2. And my mobile can't show the sign. When you have a 45° angle and you need to know the kathete, you divide the hypothenuse with 1.414. If you want to know the length of the hypothenuse, then take the length of the kathete an multiplicate with 1.414. Easy. It's only the sentence of Pythagoras.

@mtnbikeman85 8 ай бұрын

Note the two line display TI30xs also can do matrix math, works the same as the TI83 but just a bit harder to see. Super useful as its an approved calculator for the FE/PE exams where graphing calculators are not.

@georgescott6967 8 ай бұрын

@@Dirk-Ulowetzin English we say "square root of 2", often abbreviated to "root 2". In programming many languages have a library function sqrt(2). My (android) mobile has √2! I can't work out kathete though... Also, in an attempt to be helpful, we use "by" instead of "with": multiply by 1.414, divide by 1.414.

@0000Sierra117 8 ай бұрын

@@georgescott6967 Kathete is from the greek Cathetus, which doesn't really get called that in lower maths. en.wikipedia.org/wiki/Cathetus

@Trainwreck1123 8 ай бұрын

at ~18:20 that is amazingly impressive. Seeing a corner round follow a path like that is amazing, but seeing it done on a manual mill is something else. Your work is a joy!

@kungfudavie 8 ай бұрын

clever guy. would have never thought of that

@InheritanceMachining 8 ай бұрын

Even a blind pig finds an acorn every once in a while 😁 Thank you so much!

@dadbear5316 8 ай бұрын

Really refreshing to see someone design their part the classic way

@khoshekhthecat 3 ай бұрын

This channel is the reason I plan on learning to manually draft. I enjoy the elegance of paper drawings

@egg_mittens 3 ай бұрын

I love my onshape and fusion, but god these hand-drafted drawings just look phenomenal.

@I-Have-Fire 2 ай бұрын

Agreed. I’m not much of a drafter but I did learn to draft using paper and pencil while in an engineering program. Though slower, hand drafting produces nicer dwgs, IMO.

@everguard 8 ай бұрын

Seeing that swivel fixture in action was unexpectedly super satisfying! With these beautiful tools you keep making, who wouldn't want to work in the shop every day?

@matthewdebeer8453 8 ай бұрын

19:10 The way the mill speed and the camera frame rate interact here makes this hypnotizing to watch. Also very cool to see previous builds make an appearance and do exactly what they were made to!

@InheritanceMachining 8 ай бұрын

😁 One of my favorite shots! Thanks, Matt!

@RealCadde 8 ай бұрын

It's almost as he's been planning this for a long time. I am sure there's going to be more tools that will be needed to make more tools until we get to a "final" project he's been planning ever since he started the channel. After that project is done, it's off to the next project. Almost every video so far is just a side project to that main project methinks.

@finn8518 8 ай бұрын

@@RealCaddeit‘s been side projects all along!!

@DarkArtGuitars 8 ай бұрын

Those are gorgeous! As a cnc guy myself it is very impressive to see how you can turn out parts like these completely manually.

@InheritanceMachining 8 ай бұрын

Thanks, man! As impressive as CNC is, I'm more impressed by the stuff they used to make on old manual machines like these.

@mattholley9134 8 ай бұрын

It’s insane that u can accurately mill complex pockets on the manual. Ur skills are impressive

@TomoHawKzZ 8 ай бұрын

@mattholley9134 the pockets are... pretty basic lol the impressive part is the corner eounding honestly, or more specifically the fixture table made to make them.

@dickmick5517 8 ай бұрын

They would cost $2000 to make the set at a manual job shop.

@ralexcraft990 7 ай бұрын

@@dickmick5517still impressive, because for a while this was the only way to get these parts.

@clintonhawkins8666 8 ай бұрын

My dad was a machinist and still has a bunch of old tools but no machines. I'd love to get into this someday. Thank you for bringing this world back to me.

@Kspice9000 4 ай бұрын

Do it. It'd trade that pays the more you learn and grow. One of the few that does nowadays that's only limitation is your imagination.

@Kspice9000 4 ай бұрын

Just find a good tech school. There are some awful programs. Find one that's more hands-on and less book learning. The real learning in this trade is by communication and doing.

@michaelrice500 8 ай бұрын

I get so much joy watching this. It's like finding out that your philosophy professor has a machine shop, writes for SNL and sometimes plays backup lead guitar for Pink Floyd. Genuinely entertaining yet instructional. Knowledge, art and humor. HA!

@bglenn2222 8 ай бұрын

Thank you for the hours of entertainment! I'm appreciative that I found your channel. It's reignited my desire to improve on my machining skills. My grandfather was a master tool and die maker for 50+ years and I've always wanted to follow his skills. My name is also Brandon and I'll be inheriting his lathe as soon as I can get down to California. Thank you for sharing your skills and journey!

@InheritanceMachining 8 ай бұрын

Thank you and so sorry for your loss if he has passed. I hope you got to (or still can) learn some of his skills firsthand. 50 years of experience is better than what you could learn from any KZfaqr

@ls2005019227 8 ай бұрын

Excellent design. Fantastic machining. Flawless editing........You are definitely one of the best machining content channels on YT- Thanks for taking us along!

@Hoaxer51 8 ай бұрын

Yes, definitely, thanks for the ride!

@InheritanceMachining 8 ай бұрын

That is very nice of you! Thank you!

@lobuzz311 8 ай бұрын

Your videos are engaging, beautiful, wonderfully shot and narrated. And best of all, the content is super interesting (for the non-machinist like me). Quickly becoming one of my absolute favorite channels on YT. Can't wait for the next one.

@InheritanceMachining 8 ай бұрын

That really means so much. Thank you!!

@tttm99 8 ай бұрын

Those copper jaws look absolutely fantastic. Industrial art, right there!

@BadYossa 8 ай бұрын

I'm a Chef and will never own a lathe or a mill, yet I find your videos incredibly fascinating and quite cathartic. They appeal to my "inner geek" I guess. The quality of your vids are next level - matched by the quality of your craftsmanship. Thanks for sharing your journey with us. Your Grandfather would have been proud to see what you have achieved with his equipment. Truly inspirational stuff mate.

@alex4alexn 8 ай бұрын

Craig is the man, a buddy comes in with the save. Would love to see more of him

@InheritanceMachining 8 ай бұрын

He's been helpful more than people know!

@joseywales3789 8 ай бұрын

I remember when my lathe instructor asked me "How was the first Lathe made? Without a Lathe to cut the threads or cut the gears?" Now I know..... *with the ingenuity of Brandon!!!!* 😁👍

@billshiff2060 7 ай бұрын

Funny, That is exactly the question I pestered my teacher with "You need a lathe to make a lathe so how did they make the first lathe?" He had no answer but after 50 years in the business and never forgetting that question, I know it now. The answer is in the history.

@mafinalmessagechangedaworl7131 7 ай бұрын

@@billshiff2060a 3d printer 3d printed a 3d printer

@bobwhite459 2 ай бұрын

Clickspring made a video where he creates a working lathe, that the Ancient Greeks could and probably did make and use, all with hand tools like files and drills he made my hand from materials we know the Greeks could make. The man's a genius. kzfaq.info/get/bejne/atZ7ZrJlmLDIlJs.htmlsi=NxKs7tHrAmXibu6d

@landvaettir_actual 8 ай бұрын

I don't know why this video was even suggested to me by YT, but I don't regret spending 22 minutes to watch it. Thank you for this almost magical experience.

@Avrohomperl 8 ай бұрын

The added humor is fun and adds to the video. Enjoyed!

@RonCovell 8 ай бұрын

Good lord - those must be the most elegant soft jaws on earth! I was absolutely blown away by seeing how your new rotary fixture allows you to put a radius on a radiused corner. Fantastic job, Brandon!

@InheritanceMachining 8 ай бұрын

Thanks so much, Ron! That one operations ended up making that whole build worth it by itself 😂

@groundcontrol6876 8 ай бұрын

Man those things are SO pleasing to the eye! Crafting lvl 99 for sure. 18:02 That turn you made transitioning from one corner to the next while leaving the already smooth radius in between them untouched was so satisfying.

@joshfairchild 8 ай бұрын

Ah you too suffer from RS?

@grahameanderson6913 8 ай бұрын

Congratulations to Eric in providing those gorgeous reference pins!

@Taziod 8 ай бұрын

When you slapped the part on the rotary fixture table with your fancy clamps and dove tail centers it looked SOOO nice

@BloopTube 8 ай бұрын

Long reach endmills have no business being as satisfying as they are

@InheritanceMachining 8 ай бұрын

Word

@jonahbrame7874 8 ай бұрын

You did an absolutely killer job with this project! That home made corner rounding tool in a boring head worked so much better than I thought it would! You really put us CNC guys to shame with your fixture design skill; that radius fixture is performing beautifully! A couple of things to keep in mind when doing big deep pockets like that: Sometimes, just grabbing a big drill to hog out the center can be way more time efficient, and then you can come back and mill out the rest of the material. in addition to being faster, the chips already have somewhere to go when roughing with an endmill now so you are less likely to recut them and break a tool. Also, it is definitely worth roughing first with a larger endmill and coming back with a smaller one to pick out the corners and finish. Of course this is coming from a guy who runs CNC, so doing a tool change is nothing, but with the amount of material to be removed at those depths you'd definitely still make your time back.

@rpower1401 8 ай бұрын

OMG! You did it! You used a Matrix calculation outside of school for a practical purpose! It's been 15 years since I last did one of those calculations in University and I still haven't been bothered to use it even once! Well done to you :)

@InheritanceMachining 8 ай бұрын

😂 Probably one of the 5 times in the rest of my life I will have a use for that!

@warnmar10 8 ай бұрын

By far the best 20 minutes of my week. Thanks!

@InheritanceMachining 8 ай бұрын

No, thank you!

@drizztdourden4476 8 ай бұрын

I love your attention to tiny details to get the thing you want just the way you want it

@InheritanceMachining 8 ай бұрын

Thanks man! BTW, on your username, I'm reading The Halfling's Gem right now!

@drizztdourden4476 8 ай бұрын

@@InheritanceMachining such a great series! I hope youre enjoying

@Mourits1978 8 ай бұрын

What I appreciate about your work is your precision, perfectionism and that you make your tools beautiful by themselves. It is just gorgeous.

@InheritanceMachining 8 ай бұрын

Thank you! I put way more emphasis on appearance than I care to admit 😂

@TradeWorks_Construction 8 ай бұрын

I’m sure everyone as said as much already but it can’t hurt to voice it again: FANTASTIC JOB! I absolutely enjoy the drafting shots as it reminds me of the hours my dad would spend hand drawing Architectural plans for his house. The nostalgia of hand drafted designs really is captivating and then seeing them brought to life through manual milling must be incredibly rewarding. While everyone may praise your drafting or machining, what really stands out is Your Filming and Editing talent. They are top class among youtube and even stand out compared to cable tv shows (that have camera men, lighting specialist, directors, microphone guys, support staff and a plethora of crew to compile/edit/produce and YOU DO IT ALL AS A 1 MAN SHOW 🍻 Cheers!

@CorbinMusso88 8 ай бұрын

I’m usually a jawjacking jabberjaw, but seeing those soft jaws dropped my jaw and left me positively lockjawed.

@barcodenosebleed5485 8 ай бұрын

Well sir, it's not Tetanus, it's not TMJ, it seems to be a terrible case of Toolmaker's Trance.

@CorbinMusso88 8 ай бұрын

@@barcodenosebleed5485 I definitely could definitively be diagnosed as dumbfounded.

@quentinreid3111 8 ай бұрын

Seeing the custom tooling you made for the round-over pass along the part, then sweep that corner...WOW!! That was incredibly pleasing to watch.

@InheritanceMachining 8 ай бұрын

Thanks! Definitely my favorite op in this build!

@lkitch 8 ай бұрын

Sweeping that handground roundover "mill" around the corner and continuing down the other side is easily the best shot you've taken on this channel. Man that was smooth.

@courier11sec 8 ай бұрын

Oh man those compound rounded corners are just slick as heck. Those things look like you grew them! Killer job. Thanks for sharing this project. 😃

@InheritanceMachining 8 ай бұрын

Those ended up being way more satisfying than I was prepared for 😆thanks!

@macedindu829 8 ай бұрын

Yeah they do. They make chamfers look like a crummy substitute... and I love chamfers!

@julianzelinski3850 8 ай бұрын

I love the joy on his face while biting into the jello :)

@scroungasworkshop4663 8 ай бұрын

You’ve convinced me that pieces of copper or aluminium sheet bent to shape are just fine. Certainly enjoyed watching you make those protectors though. Cheers mate, Stuart 🇦🇺

@aserta 8 ай бұрын

Just drill holes in your chuck jaws and use a single bent piece of copper or aluminium or a 3d printed sleeve (if you don't have a 3d printer, you can get the part made online and shipped to you).

@scroungasworkshop4663 8 ай бұрын

@@aserta Thanks 👍👍

@GulliJ 8 ай бұрын

French here 🇲🇫, in some school: machining and drawing and cleaning the workshop, encounter some motivate loss and bad mood for student, but ! YOU find the solution! Not due to young age or young stupidity, these student just need to see your video ! All of yours ! It's more than enough to give them new energy and motivational mind to succeed any doubt and problem! That's the way to mind, the spirit of mécanique is here They will WANT to take in their hands those beauty, useful beauty you've cut from this huge scrap useless metal that rust in the school workshop I want all student in world see that to be remotivate for ever ! Well done 👍 this is probably the final best item you ever machined ! ❤

@Lemming1970 8 ай бұрын

Engineering when time/cost isn't an issue. I love it.

@MrKyleA 8 ай бұрын

Just waiting for the episodes where you just make your own mill and lathe haha

@CheffBryan 8 ай бұрын

As always, it's super helpful to see the mistakes and learn from you. I'm just about at my 90 day review on a new job of running a 4 axis mill, and you've definitely been a huge help in learning all the things to watch out for

@InheritanceMachining 8 ай бұрын

Hey, man that's awesome! Glad some of my shop musings could be helpful. Thanks!

@johnmessenger7292 8 ай бұрын

That was very kind way of saying "by avoiding all the screw ups you made" LOL

@MrMath-xm9fk 4 ай бұрын

The accuracy of your works deserves to be taught

@mattdodds2954 8 ай бұрын

Vision, skill, craftsmanship, filming, editing, humour. What more could I say? Did I mention skill? Excellent work Brandon.

@InheritanceMachining 8 ай бұрын

Thanks, Matt!

@AlsInd 8 ай бұрын

i love to watch you work. the attention to detail, precision work, and the problem solving are just pure pleasure for me 🙂

@InheritanceMachining 8 ай бұрын

Thank you!

@StarfallSabersForever 8 ай бұрын

The Dad jokes are strong with this one! Love it!

@InheritanceMachining 8 ай бұрын

😁

@jrondyer1049 8 ай бұрын

Use to hear that a lot in Southern WV, eastern KY and southwest VA(coal fields).

@justaguywhoplaysfalloutsom1104 8 ай бұрын

13:47 if you dial in off of the moving jaw without it tightened onto a part you risk your angle being off slightly from the slop in that jaw. Not super important here but it is something to keep in mind for tighter tolerance angles. Btw awesome work, you make this look easy.

@InheritanceMachining 8 ай бұрын

Good call! I didn't even consider that. Thanks!

@hemidaytona2378 8 ай бұрын

You realize now that the 3-jaw chuck is wondering, "where's mine?" 🙂

@virusjohn8310 8 ай бұрын

Another gloriously overkill but amazingly satisfying project Brandon! As a CNC guy I use carbide constantly and do recomend it to people doing 'home shop manual' stuff if they have solid enough machines and can stomach the cost, the benefits are worth it. Also 10/10 use of the awesome rounding fixture and the idea to make a lathe tool for the boring head, I feel no shame in admitting I let out an audible 'oof' of satisfaction seeing the 2 in action rounding that first corner. Keep up the good work my dude, your an inspiration!

@jthomascdn20 8 ай бұрын

I literally got giddy excited to see a new video out. This guy does such an amazing job

@emailjustinbyrd 3 ай бұрын

As a long time viewer I absolutely love seeing you use all the tools I've watched you make in past builds.

@Stefan_Kawalec 8 ай бұрын

That rounding fixture and the quality of rounded corners made my eyes wet. The jaws should be in some gallery. They're literally a work of art.

@InheritanceMachining 8 ай бұрын

I'm going to cry the day I accidentally cut into that 😭 thanks, man!

@Stefan_Kawalec 8 ай бұрын

@@InheritanceMachiningDon't you even dare to think about cutting into that!

@martinnguyen6884 8 ай бұрын

Those soft jaws look beautiful! i admire your efforts in making it look aesthetic and functional too

@InheritanceMachining 8 ай бұрын

Thanks man!

@pappaflammyboi5799 8 ай бұрын

Clever, utilitarian, and beautiful all at the same time. It brings a tear to my eye. 😁

@endleontiozae7061 6 ай бұрын

You are the sole reason that I can build things properly by the way. You taught me some very important things.

@BlueFlameOfLife 8 ай бұрын

It's like a work of art!! I can't imagine the number of hours

@c4t4l4n4 8 ай бұрын

Wow, one might end up thinking that you would eventually run out of cool projects and then you come up with this. Useful, clean and a great looking design. I loved seeing how you use your previously made tools to keep the cascade of projects on trajectory. BTW, getting the bore straight and parallel was what I referred to in my last comment in regards to testing dimensions to ASME drawing standards. Off course the set of gauge pins/dowels makes it easy. 😃

@InheritanceMachining 8 ай бұрын

Thanks, Richard! My favorite projects are ones I get to use the most of my tools on! Honestly I think I could have gotten away with ISO's lax requirements for the bores on these 😉

@DolfocarAli 8 ай бұрын

22min with you is like 2 min, i love your videos ❤

@lemperdYt 2 ай бұрын

this feels like a relaxing show that streams at 7am in the morning I fking love it

@ozmaniac33 8 ай бұрын

Absolutely gorgeous, and so makes me want to cry, realizing just how far I am from this in my hobbyist workshop. Utterly inspiring to do better!

@InheritanceMachining 8 ай бұрын

Thanks man! We all start somewhere, the key is to just keep going and improving.

@ozmaniac33 8 ай бұрын

You are a recent discovery and subscription on youtube, with me previously considering ABOM79 to be a representation of a serious machine shop, CuttingEdgeEngineering to do some huge projects in Australia (where i'm from ;-), and ThisOldTony to be the court jester of hobbyist machinists. Now you define a new classification of the "fine artist" machinist/machinist pornographer, lol, as everything I've seen you make is beautiful and or sexy beyond belief....well to a wannabe machinist anyway. Can't wait to see what you make next.@@InheritanceMachining

@InheritanceMachining 8 ай бұрын

@@ozmaniac33 😁honestly it's an honor to be named amongst those guys. Really, thank you so much

@efro4812 8 ай бұрын

Great video as usual, you certainly own the swankiest set of soft jaws I ever did see. And don’t forget to fed the broken end mills to the BOS, it’s all metal, he won’t taste the difference😉

@c4t4l4n4 8 ай бұрын

The BOS actually has quite a refined palate. It can differentiate many types of alloys, lol. 😃

@dragonpjb 8 ай бұрын

I kept expecting that rotary table to activate your "Final Smash."

@Winters-381 8 ай бұрын

seeing the chamfers cut on the corners (on the rotary fixture table) was intensely satisfying.

@affanmoshe4767 8 ай бұрын

Idk how but you always have something come up with, like you can make anything!

@InheritanceMachining 8 ай бұрын

😁 thank you!

@iemozzomei 8 ай бұрын

Thanks for sharing as always. Was feeling pretty shitty, and seeing the amount of pride you take in your work, and the care you put into things always makes me feel a bit better haha.

@InheritanceMachining 8 ай бұрын

Absolutely! I'm glad I could brighten your day a little 😊

@jamesmanning2831 8 ай бұрын

I can’t express how much I have truly appreciated and fallen in love with your videos! As someone who doesn’t do machining your videos are very soothing and inspiring. And it took me two videos but your channels name is amazing! Can’t wait to see the rest of your journey and look forward to the next one!

@johnkraus728 8 ай бұрын

Currently my favorite machining channel. Drawings, setups, procedures, mistakes, home shop style, beautiful results. Smart, clever dude, too. Thanks for sharing.

@Holzy09 8 ай бұрын

I literally cheered and whooped out loud when you used your rounding table around the corners. What an absolute thrill

@InheritanceMachining 8 ай бұрын

You sounds as excited as me! 😁

@joshclark44 8 ай бұрын

Could use some quick polishing on the rounds, but those look super nice! It'd be interesting to measure how repeatable they are vs the normal hard jaws and how much slack, if any, they give. And yes you also need some for the 3 jaw 😄 oh and plastic and jello pins, but that corner rounding fixture is pretty sweet!

@InheritanceMachining 8 ай бұрын

Thanks, Josh! Repeatability would be interesting to measure though I have the advantage with the 4 jaw. Time will tell if i actually go through the torture of making a set for the 3 jaw 😂

@RealCadde 8 ай бұрын

How is it that everything you make comes out looking absolutely gorgeous? Those rounded and rounded corners makes someone like me, who doesn't to any craftmanship at all, still warm and fuzzy inside from just imagining running my hand over those pieces. So satisfying!

@bizzybee3021 7 ай бұрын

Its videos and creators like yours that should be higest on the algorithim, this platform was created to teach ( for free) those who couldnt find or afford the trade schooling. This is a piece of art as well as a perfect explanation of safety, precision, and problem solving. Thank you

@mhenlopotter1612 8 ай бұрын

I absolutely love this! Sure, this is kind of overkill, the "bent aluminium sheet" method works well enough. But these parts turned out gorgeous. And as a side product, excellent entertainment!

@InheritanceMachining 8 ай бұрын

I started regretting it a little after the 3rd endmill 😆 thanks!!

@youwillneverguess 8 ай бұрын

It's all starting to come together! I think grandpa would be proud!

@jackreed3445 24 күн бұрын

I would call that time well spent, regardless of how long it took. they are also very good looking parts. I would keep my eye on anybody visiting the shop if I were you as they might develop legs and get away. Take care and be sure to have a little fun every day, jack

@knightmare714 8 ай бұрын

Beautiful, I love the contrast of the steel and copper.

@ManofLowMoralFiber 8 ай бұрын

Absolutely incredible work on those jaws.

@goboyz8016 8 ай бұрын

Not only to I envy the work you do but the time make for yourself to complete the work is also quite enviable!

@InheritanceMachining 8 ай бұрын

Thanks! It does help that this is my full time job now 😉

@jforrestal365 8 ай бұрын

Nice to see somebody doing hand drawings rather than CAD 👏

@haroldmorris4743 8 ай бұрын

I love all the little comedic bits throughout the video good job on all your videos. Getting better and better

@InheritanceMachining 8 ай бұрын

Thank you 🤓

@haroldmorris4743 8 ай бұрын

Thanks for replying really boosted my mood. I know these uploads take a lot of time and effort but I really do look forward and get excited to watch these videos. I’ve always liked machining and metal working but never had time to divulge. Thanks for the videos

@dontcare432523452 8 ай бұрын

I love that you include all the hand drafting.

@frederikrein 8 ай бұрын

I love how you are using tools to make tools which you then use to make more tools! Just brillant!

@jrb_sland 8 ай бұрын

Very pretty, sir! And functional to boot! At age 75 I'm now mostly retired from my electronic design & prototype manufacturing business, but my business associate & I were always agreed that a few more hours getting the cosmetics exactly right on a circuit board layout was worth the effort. Ditto for the many mechanical parts of the instruments we built. The "oohs & aahs" from both customers & competitors always indicated to us that we'd done the job right.

@InheritanceMachining 8 ай бұрын

Thank you! Even if the there is no-one else seeing your work its still good for one's own soul to create something beautiful that they are proud of

@danielowens4789 8 ай бұрын

It becomes fun when you take your time and pay attention to every detail. Nice work, great blueprints, really enjoyed watching your procedures.

@jonasfelleki8374 8 ай бұрын

Man, your shop made tools are like jewelry, it's a joy the watch them. And the filming and relaxed storytelling is at the same high level. Thank you for sharing!

@commander-tomalak 8 ай бұрын

Oh daaang, these rounded rounds are indeed the single most attractive thing I've ever seen anyone bust out on a manual mill 😍 Stunning build as usual!

@InheritanceMachining 8 ай бұрын

I think that's my favorite operation to date! Thanks!

@mudnducs 5 ай бұрын

Those are far and away the most effective soft jaws I’ve seen Nice!

@williamrogersiii4418 7 ай бұрын

I love how many parallels there are between machine work like this and data analysis in GIS Pro that I use. You have an ultimate objective but along the way you create tools, and toolkits and toolboxes, you learn new methods, learn and work together with others and break a few things along the way. Side projects increase as the complexity of the project increases. Some tools are more useful than others but the experience and joy you get while building something is so much more valuable. Thanks for helping me relax after hours and hours of GIS work.

@astonmoore6126 8 ай бұрын

Your channel honestly makes my soul happy!! Watching you achieve such flawless beauty in your work is something that always makes my day. Thank you for the incredible content

@InheritanceMachining 8 ай бұрын

😊 I love to hear that! Thank you!

@356porsche 8 ай бұрын

Thank you, now that is what you call a fine set of soft jaws

@WeGoWalk 8 ай бұрын

I found this video to be absolutely mesmerizing! The precision, the math, the smoothness of the finished product…wow!

@clairekholin6935 8 ай бұрын

The contrast between the copper and the steel is the best part by a long way.

@thecactustree 8 ай бұрын

That moment when you went from radiusing the one edge, then saying you were still on the rotary table and made the smooth radius on the corner.... So satisfying.

@InheritanceMachining 8 ай бұрын

😎

@TheDistur 8 ай бұрын

Those are some elegant jaws. Quite a thing to make manually in the age of cnc!

@InheritanceMachining 8 ай бұрын

Thank you!

@fifis101 8 ай бұрын

It's been a while since I've watched a machining video and this one didn't disappoint! Beautiful work!

@Chris-bg8mk 8 ай бұрын

I just love this project so much the way you brought together some of your other toolmaking projects! I always used copper Jaw covers like your aluminum ones after while they get tarnished and work hard but I anneal with a propane torch, and put them back in service.

@InheritanceMachining 8 ай бұрын

Thanks a lot! That annealing step is pretty clever. I never would have thought of that!

@JointerMark 8 ай бұрын

An impressive solution. Thank you for posting this.

@InheritanceMachining 8 ай бұрын

You're welcome! Thank for watching

@Joe___R 8 ай бұрын

In the future when milling deep pockets use the largest endmill that will fit into the area and use it to drill out the bulk of the waste material. Then just make sure you have endmills with long enough flutes. Carbide endmills will also help since they will have the least amount of deflection lessening your chances of breaking them when milling at maximum depth.