I am having the same issue. Fan will work with remote but lights won’t come on. I have already replaced it thinking it was a faulty led but it still doesn’t come on with the new light. Need help!

@ Jocelyn Salazar did you find a fix?

I need help too.Mine spins, but the light won’t turn on, plz help.

You would probably want closet to 15” to move enough air . 11” might give it a wobble but you can try it

This large fan performs better with a longer down rod. Shortening the down rod (or eliminatingnit) would hinder its ability to grab surrounding air to push down.

yes

Hey, i would love to swap out to a 5000k bulb as well! Would you by chance have a link to the retrofit kit?

www.amazon.com/gp/product/B06XT6YGDW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Feel free to give me a shot out if you do another video updating the install. You can clip the pigtail on the factory light and wire that in the make it quick disconnect.

Thanks for this I bought this fan and really hate the light

@@andrewesquivel Have you done a video on how to install this retrofit? THanks

Based on my experience, I would never (again) use the wall switch with a remote fan. There seems to be something in the internals of the fan's remote receiver that gets all messed up when you try to alternate between using the switch and using the remote - and, once it's messed up, there's no way I know to get it right again. Maybe if you plan to use ONLY the wall switch every time, and never use the remote, then it would be ok - but you lose all the adjustability that way.

BT B works perfect

I have the same problem. I have 3.

"Switch the remote to one???" There is no "pair" button on this remote.

Exactly .. I have no pair at all and have been pressing the on button like the said and nothing to get it to work

Tommy Grant fantastic. One of the best fans I've ever had

Working perfectly

I can't comment on this particular size/model; but, I have a 6-blade Home Dec remote fan with light that's been in for about 4+ years, is used for many hours every day, and it is a dream!!! Works perfectly every time and absolutely silent!! (I had someone install it for me - and I would think a good solid installation makes all the difference). Good luck!!

Had mine four years and today stopped working and can't get it to work at all

Ours does that to. I think it's a physical gear that changes depending on direction

@@andrewesquivel Thank you for responding! We installed 5 smaller fans (same model and brand... just smaller) and none of them make the thunk sound. Only the 72" one makes the thunk. And it didn't make the thunk for the first 18 months of use. My gut is telling me something is wrong with the 72" fan, but I have no clue what it is.

There is no pairing button on the remote . Have no idea . Tried pressing on button for a few seconds, but nothing works

How to pair remote

try ew battery's mine were bad.

Maybe you were trying to alternate between using both the remote and the wall switch - you have to use only the remote. Somebody on here said that ruins the "pairing" and it has to be "re-paired." For me, it ruined the entire remote function and I had to replace the fans.

I’m having the same problem

What "button in the back???" Mine has no button in the back - only a tiny switch inside the battery compartment that says "DIM" or "ON" and you can either turn it to one or the other. Is that what you meant? I don't know what that would have to do with "pairing," though.

Dang same issue here

Fan-tastic

OK so $300 spent today. Home Depot. 9000 + cuft/min air, nothing touches it - lookout Houston Mosquitos !

I love mine bought a second one the 64 inch.

as far as i know, this fan must be operated solely by its remote. I did not see any info when I set it up for an option to use a switch to control it. As for wall mounting the remote, you might need to get creative as I do not recall seeing any hardware available to specifically mount this remote to the wall.

andrewesquivel thanks for the quick reply. I can deal with their being no mount but if you leave the light on the fan and flip the wall switch off, then when you come back in the room, the wall switch will turn back on the light, right? Or are you saying that when you walk into a dark room, the only way of turning it on is with the remote?

@@dubTuube sorry I didn't see this question sooner. As far as I know, if you turn the switch on the wall off you will end up unpairing the remote from the fan. The only way to turn on the fan and/ or the light is via the remote. You will then need to re-pair the remotes after you turn the switch back on if it is off for too long.

Right on brother. Thank you

You can use the Bond ceiling fan hub then control the fan and light separately via “Alexa” or “Google”. All of my fans are set up that way.

Like a dream. No problems to report.

almost like a 100 watt blub

I can't get my fan to pair with remote. Followed all directions and is wired properly. What's going on?

Same

Me too

Same

Not funny when you added pet.

no, silly. only changes brightness.

@@carolinej3661 bro that was a year ago I already know now

@@tadeowmm7892 excuse me for trying to be helpful... I don't sit here waiting for people to put questions up and You're welcome.

@@carolinej3661 I know, It wasnt supposed to sound rude tho I didnt mean it the way to took it😁

@@tadeowmm7892 all is forgotten - good luck with your fan

Maybe you were trying to alternate between using both the remote and the wall switch - you have to use only the remote. Somebody on here said that ruins the "pairing" and it has to be "re-paired." For me, it ruined the entire remote function and I had to replace the fans.

@@carolinej3661how does it even pair? My remote has no pairing button inside it. Only one for on and dim for the light and the place to add barriers

Not batteries

My (same) remote does not have a "learn" button - are you sure you're talking about the same one??

@@carolinej3661 there are some remotes that have learn button. Mine does

as its all plastic its homogeneous not like wood or natural so should self balance ?

didn't need to ballance mine no wobbel or shake.

samuel cook you have to turn the breaker off to the fan and then when you turn the breaker on within 30 seconds you need to hold down the power button for 5 seconds it may take multiple tries but the light kit will flash

I'm having the same problem did you get the remote to sync with the fan?

@@garidccox5578 thank you so much you tip work perfectly

Theres a great installation video on Home Depot including programming if you bought more than one

did your fan come with directions?

no kidding ... ffs ...

Not that simple