Kenwood Eleven III - Vintage Stereo Receiver. Repair Restoration Testing Old Hi-Fi 2 Channel Audio.

Рет қаралды 34,340

4 жыл бұрын

A Kenwood Eleven III stereo receiver repair and restoration video. This vintage 2 channel audio classic produced in 1977 was found in a Florida attic. This Kenwood Eleven III receiver is the perfect example of vintage audio toughness. It was left to rot but after some work it's ready to make music. In this video I clean the decades of dirt and grime from this vintage Kenwood Eleven III receiver along with repairing two intermittent problems. The Kenwood Eleven III features both a timer and automatic speaker impedance detector.
Other Classic Stereo Equipment Video's -
Marantz 2500 Receiver #2 • Marantz 2500 - Did I O...
Fisher 800-C Receiver - • Fisher 800-C Vacuum Tu...
Marantz 2500 Receiver #1 - • Marantz 2500 From The ...
Ultimate Guide To Vintage Audio Repair. - • Ultimate Guide To Vint...
Digital Tape Deck Audio Analyzer - • Nakamichi T-100 Analog...
Hantek 6022BL PC Oscilloscope Review - • Inexpensive Oscillosco...
Vacuum Tube Heaven - • Vacuum Tube Equipment ...
Kenwood KA-5002 Integrated Amp - • $45 - Buy This Amplifi...
Sony TA-E88B Preamplifier - • Sony TA-E88B Preamplif...
Technics SE-9600 Power Amplifier - • Technics SE 9600P Powe...
Pioneer SPEC -1 And SPEC -2 - • Pioneer SPEC 1 SPEC 2....
Marantz 10B Tuner - • Marantz 10B Vacuum Tub...
Nakamichi Dragon 1000P 1000MB 1000 DAT - • Nakamichi Dragon 1000P...
Sansui BA-5000 Power Amplifier - • Sansui BA-5000. The Mo...
Pioneer SX-1980 Complete Edition - • Pioneer SX-1980 - The ...
Rotel RX-1203 Receiver Part 1 - • Rotel RX-1203 Stereo R...
Rotel RX-1203 Receiver Part 2 - • Rotel RX-1203 Stereo R...
Rotel RX-1203 Receiver Part 3 - • The Best! Rotel RX-120...
Trio W-40 Vacuum Tube Receiver - • Trio W-40 Vacuum Tube ...
Kenwood KA-3500 - • Kenwood KA-3500 Integr...
Dynaco Stereo 70 - • Dynaco St-70 Vacuum Tu...
Bose 551 Receiver And 901 Speakers - • Bose Spatial Receiver....
Mitsubishi Stereo System - • Mitsubishi Vintage Ste...
Akai GX-255 Open Reel Tape Deck - • Reel To Reel Tape Deck...
Shootout! SX-1980 vs Nova300 - • Pioneer SX-1980 - Peac...
Harman Kardon Sixteen - • Harman Kardon Citation...
Monster Receivers From The 70's - • Monster Vintage Receiv...
Marantz 2265 - • Marantz 2265 Vintage S...
Kenwood KR-8050 - • Kenwood KR-8050. Resto...
Teac X-1000R - • Teac X-1000R Reel To R...
Pioneer SX-1250 - • SX-1250 - The Best Pio...
Pioneer SPEC-1 - • SPEC-1 - Pioneer Pream...
Pioneer SPEC-2 - • SPEC-2 - The Most Powe...
McIntosh MC2205 - • McIntosh MC 2205 Power...
Nakamichi Dragon - • Nakamichi Dragon Casse...
Sansui BA-5000 - • BA-5000 Sansui Power A...
Marantz 2500 - • Model 2500 - Marantz R...
Sony TA-F6B - • Sony TA- F6B Integrate...
Sansui CA-2000 - • CA-2000 - Sansui Pream...
Luxman M-300 - • Luxman M-300 Power Amp...
Scott 340B - • Scott 340B Vacuum Tube...
Marantz 2270 - • The Best Receiver Ever...
McIntosh 752 - • McIntosh 752 Vintage S...
Sansui AU-9900 Part 1 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 2 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 3 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 4 - • Sansui AU-9900 Vintage...
Marantz 23 - • Marantz 23 Stereo AM/F...
SAE 2400 - • Video
Nikko 440 - • Nikko 440 Vintage Ster...
Nakamichi LX-5 - • Nakamichi LX-5 Vintage...
Kenwood Eleven III - • Kenwood Eleven III - V...
Sansui G-9000DB - • Video
Yamaha CA-2010 - • CA-2010 - Yamaha Integ...
Nakamichi Dragon - • Video
McIntosh MC2505 - • McIntosh MC2505 Power ...
Sansui Eight - • The Best Receiver Ever...
Sony EL-7 - • Video
Pioneer SX-1980 - • SX-1980 - The Most Pow...
Akai GX-220D - • Akai GX-220D Reel To R...
Pioneer A-27 - • Pioneer A-27 Integrate...
Nakamichi Digital Products - • Rare Nakamichi Digital...
Sansui G-9000DB - • G-9000DB - Sansui Rece...
Pioneer Silver Rack System - • Pioneer Silver Rack Sy...
Troubleshooting Failures In Vintage Audio Equipment -
Vintage Audio Repair In 30 Minutes! - • Repairing Vintage Audi...
Vintage Stereo Repair - • Vintage Stereo Repair ...
Phono Repair And Troublesome Transistors - • Phono Troubleshooting ...
Hakko 808 De-soldering Tool A Must Have - • Vintage Stereo Equipme...
Hazards Of Reel To Reel Tape Deck Repair - • Reel To Reel Stereo Ta...
Troubleshooting No Audio In Vintage Equipment - • Vintage Marantz 2245 S...
General Failure Troubleshooting In Vintage Equipment - • Troubleshooting Failur...
Reforming Speakers - • Bose 901 IV Speaker Fo...
Checking DC Offset On Vintage Amplifiers - • Checking DC Offset On ...
Why You Must Replace Old Electrolytic Capacitors - • Save Your Electronics ...
Help For the Vintage Audio Fan -
Buying Vintage Audio? - • Buying Vintage Audio? ...
Finding A Technician To Fix Your Equipment - • Finding A Technician F...
Should You Buy Vintage Or New Stereo Gear - • Should You Buy Vintage... Beware Of Vintage Stereo Ad's - • Vintage Stereo Equipme...

Пікірлер: 187

@jeffreyjohnson9268 11 ай бұрын

Nice job. I was just gifted by mother, his KR-10000 III, Reel to Reel, 8 Track player/recorder and turntable that my father purchases all in 1977 while we were stationed in Spain

@jeffro5032 8 ай бұрын

Doing Gods work here my man! That is another great receiver that could of easily wound up in a dumpster. And you saved it! That thing looks beautiful.

@flytown9853 4 жыл бұрын

My Pioneer SA 9100 is in the hospital for some restoration work and I pray when she comes back from surgery she'll be as pristine as your Kenwood Eleven lll, I've had her since she was born, you've done a wondeful job on that Kenwood to bring it back to life.

@vintageaudioaddict 4 жыл бұрын

Thank you, Sir. I appreciate your comments. Your SA-9100 is one of best integrated amps around. I'm sure when she returns home she'll be making music for decades to come.

@marine6055 2 жыл бұрын

I have the same receiver. I bought it in 1977 in Okinawa Japan while stationed there. Still own it. Have it set up in my basement hooked to 4 Bose speakers. Love to have it restored some day.

@vintageaudioaddict 2 жыл бұрын

Very cool! I've still got some of my old gear from the 70's also.

@Edgy01 2 жыл бұрын

I purchased new an Eleven II in 1977 and had what i later learned was the typical problem-the timer shaft fracturing. I hot wired around it so that it would at least work. I did that probably in the early 1980s. In 2021 I discovered a guy on eBay making with his 3D printer the replacement timer shafts. It wasn’t too hard to fix. Disassembly and reassembly is fairly straightforward. I reversed my hot wiring job, installed the new much better shaft, and voila! Working again. I’ll have to perhaps get serious about replacing some capacitors I expect at some point. I will have to hook it up to my JBLs and see how it is holding up. The tuning process is a little scratchy-typical, too, for older gear. I will have to learn where to concentrate my attention! And yes, I still have the original box! Your video gives us all the encouragement to keep our old stuff alive by doing a little work on them. Clearly, these things are certainly better made then so much of the stuff today.

@vintageaudioaddict 2 жыл бұрын

Thanks a lot for sharing. It's great that you still have your receiver from years ago. I'll have to check out eBay and the timer shaft as this one is broken also. Yes, this vintage equipment was built to last. Most of the modern electronics when it breaks you toss it in the garbage.

@MrDoneboy 3 жыл бұрын

Man...Being a teen in the late 70's, I loved me some stereo receivers from that era. Kenwood, Pioneer, Sansui, Marantz!

@jimbo141 2 жыл бұрын

That’s a sexy machine. I missed picking one up by 30 minutes. The search goes on.

@vintageaudioaddict 2 жыл бұрын

Kenwood made some great audio gear back in the day.

@Johnydogood Жыл бұрын

Love this, found one at a thrift store for 30$, absolutely amazing! In those days i had "bass " friends who had thier cars ultra bassD out, this Kenwood can run 4 4ohm loads, lol i had 4 MTX 8000 ON THIS BABY

@vintageaudioaddict Жыл бұрын

Great find! Enjoy.

@truck9moon100 4 жыл бұрын

I can't imagine being stuck in a Florida attic for all those years. What a terrible life. So glad you brought it back. Thank-You very much.

@vintageaudioaddict 4 жыл бұрын

Your welcome and thank you for watching.This Kenwood Eleven III just needed a chance to live on. She may never be cosmetically perfect but she was worth saving.

@deankq4adj125 4 жыл бұрын

This is a beautiful receiver. Never seen one like this before! Great job in the restoration!! Thanks for sharing!

@vintageaudioaddict 4 жыл бұрын

Your welcome and thank you for the kind words.

@raymondshartrand2417 Жыл бұрын

Wow. That unit is gorgeous. 👍

@conservative599 Жыл бұрын

Stunning Rebuild! I have a KR-9340 QUAD 4 x 50W Receiver given to me in the 90's, and it got a little wet in a trailer was the story. Missing the CD4 Phono module, but complete and I used it for TV sound with 2 original Dynaco A-25's. You can see the excellent voltage regulation, when cranking into these 4-5 ohm Danish speakers, from the dial lights and STRONG low end. I had some crackling and intermittent on one of the front channels, a baed edge or other connector and some leaky cap or corroded leads transistor like my SX-1010 has are often suspect. I was an Service Tech in the 70's in NJ at Lafayette Radio and then Acrosound Service Labs where I got my Pioneer in 1974 for $470 Employee Cost!!!. Also into Ham Radio and have the Kenwoof RX-599/TX-599 Twins, and rebuilt and 10X recapped the audio and feed into a B&O S-45 Phase Link speaker directly; makes Ham AM and Wide Band SSB sound great, with 3 different 8-pole Crystal Filters and a Kenwood heavy VFO tuning dial that can SPIN from end to end, 600KHz range because it has a clock-like gearing precision. SORRY getting Off track, but I wanted to counter another Stereo KZfaqr who just dumped on Kenwood & Technics! My point is BOTH Kenwood and Pioneer made great equipment. I was the luckiest guy to be PAID to work on these beauties in HS and College vacations and Holiday seasons.

@canismajorconservative8094 4 жыл бұрын

Good to see old vintage gear become new again. I just bought a new Onkyo receiver but I wish I still had my Sansui I bought in Germany back in the early 70s. That baby would rock. Nice clean audio into Kenwood speakers. Funny I can't remember the model number but in 1972 it was the biggest 4 channel unit Sansui made. With the help of a friend we hand carried that monster speakers and all from Frankfurt back to my military location at Butzbach. 4 trips in all. We were so determined then. Great video !!

@vintageaudioaddict 4 жыл бұрын

Thanks for for your kind words and for your service. That's a great story! Thanks for sharing it. LOL, I can imagine the smile on your face as you look back to those days as your writing those comments. This equipment was/is a part of so many life's and beings back good memories for most.

@brianberes 4 жыл бұрын

Thanks for the great history on Kenwood and the Model Eleven III. I just found me a Model Eleven II this week for sale in Houston and bought it from this nice gentleman that restores old HiFi equipment from the 70's. The receiver is in great condition and it was completely gone through and sounds awesome. I too had never seen a receiver with a timer to automatically shut it off after so much time. I don't know if I like it but interesting to say the least. Anyways, would like to hear your assessment of the Model Eleven and its sound. I really think it has a great warm tone and has plenty of power to run my old RTR three way towers with two ten inch woofers with ease. I am glad I bought it.

@jjcale2288 4 жыл бұрын

Another beauty saved from oblivion! Not to mention the "history lesson" that makes the video once more valuable!

@vintageaudioaddict 4 жыл бұрын

Thank you very much. I always appreciate your comments.

@mariodesmo 4 жыл бұрын

I have my 7100 integrated amp and 7300 tuner I bought in 1978 still running strong. Beautiful sound and have never failed to power up and get things going!

@vintageaudioaddict 4 жыл бұрын

That's great! The equipment then was engineered and built to last. I'm so glad to have some of my audio equipment from my teen years in the 70's also.

@louislarsen2256 4 жыл бұрын

I bought this receiver back in 1977 in Yokosuka Japan at the base exchange, along with Sansui speakers and other items. I loved it so much but I finally gave everything to my brother.

@jerrydiver1 3 жыл бұрын

Got mine in early 1978 at the Guam (Andersen AFB) exchange. Finally got rid of it by leaving it behind on my last move in June of '20. Had the Kenwood Triple 5 speakers, Kenwood turntable and cassette deck. What an awesome receiver.

@craiglabreche9902 3 жыл бұрын

Fantastic restoration . Bought my ka 3500 and it 5300 in the Philippines in 77 Left them in 1990 but found a pair on e bay this year and phenomenal , I got lucky It’s hard to find shops that work on Vintage so you are definitely gifted , many thanks

@vintageaudioaddict 3 жыл бұрын

Thank you so much. Your kind words are appreciated. My first "real" piece of hi-fi gear was a KA-3500 when I was a teenager. I still have her! Great little integrated amp.

@tomlindalewis2146 4 жыл бұрын

Great video as always! I have a Model Eleven MK II that is unrestored, but in excellent shape. I really enjoy it. I recently picked up a JVC JR-S 600 MK II that is in similar shape to the subject of this video. Hopefully I can get it up and running! Thanks again for sharing your audio stories! Tom

@vintageaudioaddict 4 жыл бұрын

Hey Tom, thanks a lot for your kind words. Both your Kenwood and your JVC are great units. I never have collected just one brand. There was just so much amazing equipment produced in the 1960's - 70's that I'm attracted to all of it. Thanks again.

@R3TR0R4V3 4 жыл бұрын

Sweet receiver! I have a KR-9600 that I'm restoring right now and noticed there were a lot of similarities between the two. I sure wish mine had a built in timer though.. Too cool! 😎

@gearheadted9210 4 жыл бұрын

Very cool reciver and great video on bringing the old gal back to life,I am restoring a 1967 Kenwood TK 66

@vintageaudioaddict 4 жыл бұрын

Thank you so much for your kind words. Thanks also for working on your TK 66. Kenwood made some really good audio equipment day in the day. This Eleven III and your TK 66 still have decades of making music ahead of them.

@KortKramer 4 жыл бұрын

Great video, thanks. Love the old stuff!

@vintageaudioaddict 4 жыл бұрын

Your welcome. Glad you enjoyed it!

@AudioElectronicsChicago 4 жыл бұрын

wow, always top of the line models

@vintageaudioaddict 4 жыл бұрын

She was top of the line alright. Top of the house in the attic, LOL. Seriously the eleven III is a very nice receiver and I will get back to her. Thanks as always for watching and for commenting.

@fredg4460 2 жыл бұрын

Always like that kenwood model classic look

@vintageaudioaddict 2 жыл бұрын

Yes, good looking gear.

@rhinsen 4 жыл бұрын

Love your videos, thank you.

@vintageaudioaddict 4 жыл бұрын

No, thank you for watching. I hope my video's help to keep the vintage audio equipment alive forever! Well.....until I'm gone, LOL. Thanks again.

@WV591 4 жыл бұрын

work of art is what they made with pride back in those days almost all companies.

@vintageaudioaddict 4 жыл бұрын

Yes, Sir! It was/is amazing equipment.

@timmmyj 4 жыл бұрын

Nice! Just got my NAD Model 300 back from the repairer, had me stumped, 50v dc tripping the speaker relay!

@vintageaudioaddict 4 жыл бұрын

Thanks. 50v....Houston we have a problem.

@stevenl.621 3 жыл бұрын

Great video and wonderful history lesson as well! I recently acquired a KR-8010 that I am looking forward to cleaning up. It is fully functional already but she does need some TLC. With it, I acquired a KX-1030 cassette deck. It is not currently functioning but I hope to fix it as I go along.

@georgenelson4500 Жыл бұрын

Thanks for the info. I have the Kenwood 11 three, and one of the channels is out. I’ll try and locate the relay , and tap on it, and see what happens.

@davedrew9328 4 жыл бұрын

I remember a friend of mine had Trio hi Fi and remember the shop in South Croydon a suburb of London. He had two tube mono block amps then later added a solid - state stereo amp the two mono blocks driving two rear speakers. It was an awesome setup. He had a Gerard 401 turntable with an SME Arm Sure M75 E cartridge. It’s funny where I live SME are just a short drive for me in West Sussex England. Also Kenwood were one of the well known hifi brands over here. Great video by the way.

@vintageaudioaddict 4 жыл бұрын

Thank you for your kind words and for watching. Also thanks for sharing. I love to hear the stories from all over the world. Man, what a setup your friend had! This equipment brings back so many good memories for most people. Where I lived here in the USA it was not impossible but difficult to find a Kenwood dealer. Pioneer, Sansui, Marantz all over the place. I find it interesting that in the UK Kenwood was a major brand. So much great gear was produced by all of the companies. I guess it must of been all about the distributors in the different countries.

@radionicpowers5938 2 жыл бұрын

what NICE turnaround

@vintageaudioaddict 2 жыл бұрын

Thank You!

@quiksr20 Жыл бұрын

Great Video!

@buitenb 4 жыл бұрын

Great video !

@vintageaudioaddict 4 жыл бұрын

Thank You!

@gotcalirealestate 4 жыл бұрын

Thank you,I really enjoy your videos and work. Looking for an old reciever. Hopefully it will come along soon. God bless!

@vintageaudioaddict 4 жыл бұрын

Your welcome and thank you for watching.

@conrad4667 4 жыл бұрын

Beautifully lit face. If I ever get some vintage audio, this would be it; or the 60W if it looks the same.

@vintageaudioaddict 4 жыл бұрын

She;s pretty. Kenwood made some great vintage stereo equipment and you can't go wrong with it.

@aussie8114 4 жыл бұрын

Awesome 👍🏼👍🏼

@vintageaudioaddict 4 жыл бұрын

Thank You!

@andrewm190E 4 жыл бұрын

That was a great little video, thanks for posting it...I've subscribed

@vintageaudioaddict 4 жыл бұрын

Thank you, Sir! I'm glad you liked it and welcome to the channel!

@asparrow5431 4 жыл бұрын

Nice vid dude. I've got the same unit. Mine looks great and sounds fantastic.

@florenciomendez5529 4 жыл бұрын

It’s beautiful, I own a Kenwood nineG, but needs work the right channel sound comes and goes.

@jimmiesmith5811 4 жыл бұрын

the right channel is always the first to go out

@vintageaudioaddict 4 жыл бұрын

Thank you very much. Your Nine G is a very nice receiver. If the sound comes and goes it's a good bet the controls need to be cleaned with deoxit. I'd try that first to see if that solves your issue.

@florenciomendez5529 4 жыл бұрын

Vintage Audio Addict Thank you Sr. I will try that, and hopefully The Deoxit works I appreciate your advice, keep up the good work.

@bchdsailor 2 жыл бұрын

Trio-Kenwood are far better than what the snobs like to admit

@vintageaudioaddict 2 жыл бұрын

Kenwood made some wonderful audio gear back in the day.

@tf7274 4 жыл бұрын

My vintage Kenwood found a partially blown tweeter...shut down that pair. Took me a while to figure out it was a mismatched ohms. Smart reciever.

@soledadmiranda2657 4 жыл бұрын

Great video! I really enjoyed it and subscribed. I have an old Nikko 2025 receiver that has been stored away at my parents house for years. It was my first "real" stereo receiver I got when I was around 14. You have inspired me to get it out and get it back up and going again. I need to find out how to replace the electrolytic capacitors. I will look through more of your videos. Thanks!

@vintageaudioaddict 4 жыл бұрын

Thank you so much for your kind words and for subscribing. It's great that you are going to get your Nikko going again. I'm sure that you will be successful. Most of repairing or restoring of vintage audio equipment is experience so just do as much research on the internet as you can before starting your project. This way before you start you will be better prepared to make the project a success. Good Luck!

@Christopher41791 4 жыл бұрын

I AM HAPPY TO SAY, I AM a Proud & One Owner of the Kenwood - III ; & it works, as good as the day I bought it Over-Sea's in 1979...…! Semi-Fi.....!

@vintageaudioaddict 4 жыл бұрын

Congrats and thank you for your service.

@tf7274 3 жыл бұрын

I run my Eleven iii with a pair of Technics SB-2766 (12 inch) on A, a pair of SB-2744 (10 inch) on B. Looking for a set of 2722 (8 inch) to finish the set. This reciever makes the Technics outperform anything I've ever tried. Even HPM. The 2766 were starving on the amp they were originally sold with.

@yamahonkawazuki 3 жыл бұрын

that trio I WANT IT. would love to run my teac reel to reel through it. that is amazing and its in good hands my friend.

@dennissingley1553 4 жыл бұрын

I have 2 of them, awesome units!

@vintageaudioaddict 4 жыл бұрын

Yes, they are.

@burtreynolds2969 4 жыл бұрын

Every time I run across the really cool looking receivers like this, with all the cool lights and meters, be it at a thrift store or antique market, even if it's in terrible shape, people still charge an arm and a leg for them.

@vintageaudioaddict 4 жыл бұрын

The last few years the vintage audio equipment has gone up in price.

@wolneycampanha8555 4 жыл бұрын

KENWOOD INCRÍVEL COMO ESSE CANAL !!! FANTÁSTICO !!! CONGRATULATIONS...

@vintageaudioaddict 4 жыл бұрын

Thank You

@alcameron6071 4 жыл бұрын

Florida is a terrible place not only for electronic components. Kenwood definitely makes a very durable unit. Same thing with Sansui. I have two Sansui receivers, one is the 3900 Z and the other is a 5900 Z. It seems there was a issue with the power switches in the Z models. I’m currently on the hunt for two new power switches for my Sansui’s but they’re pretty hard to come by. They’re both still operating but the switches could use a replacement.

@jfrye411 4 жыл бұрын

What kind of Equipment do you have available at this present time?

@altops4490 Жыл бұрын

I have a working KR9600, need clean, caped, and served, with minor upgrades wanted, ground cord, brass banana plugs, new sparko Op Amp, have bought a new cap kit already.

@PrimeHiFi 4 жыл бұрын

Awesome video. I would love to see you restore some Kenwood “L” series gear. I have a Kenwood L-07C and a pair of L-07M’s and they are truly fantastic.

@vintageaudioaddict 4 жыл бұрын

Thanks a lot! Your Kenwood gear is great stuff. Kenwood doesn't have the following that some of the vintage audio equipment has but they made a lot of excellent audio equipment.

@graydad5031 4 жыл бұрын

Yep you done it again :) Great work and WOW she's a beaut. How did you learn all this if it wasn't your day job. Keep them coming.

@vintageaudioaddict 4 жыл бұрын

Thanks for your kind words. She will live on and for that I'm grateful. I had an electronics background. When I finished school in the late 1970's I obtained a job with General Dynamics best know as a military contractor.

@edwardgamble3403 4 жыл бұрын

I always wondered what people did with their old audio equipment. I wonder how many other attics and basements have old electronics just sitting in them. also I enjoy your channel and I have subscribed

@barrylafratta5720 3 жыл бұрын

great story

@norton750commando 4 жыл бұрын

I have that exact Kenwood KA-3500 integrated amp that I bought new in 79, along with the KT-5500 tuner. It's been my main amp since then and other than cleaning the pots every few years with some deoxit, never had an issue. Built like a tank and sounds great. Every once in a while I think I should upgrade, but then I think "why bother", although if I could get my hands on a Kenwood 600 Supreme for cheap, I might pull the trigger.

@vintageaudioaddict 4 жыл бұрын

Congrats on having your equipment for all of these years. Kenwood made really good audio equipment back in the day. Your happy with your setup so unless your a collector like me, as you said why bother.

@norton750commando 4 жыл бұрын

@@vintageaudioaddict I don't have room to be a collector, ha. One thing I learned a long time ago, is that the really important part of a system is the speakers. Over the years I've replaced and upgraded, and now run some Totem Dreamcatchers that are really great. Also for playback I use a hot-rodded Rega P2 so that helps.

@barrylafratta5720 3 жыл бұрын

i painted the front of wood flat black . makes it look nice .on the silver face.

@michelewang6983 4 жыл бұрын

Nice 🥳

@vintageaudioaddict 4 жыл бұрын

Thank You!

@TheC5corvette 2 жыл бұрын

I just picked up a minty Kenwood Eleven GX , Only issue was when i switched the FM to Dolby FM and i would loose a channel . If i tapped on unit the channel would come back on... After probing around i narrowed it down to the F.M. DE- EMPHASIS switch on the back... Cleaned it up , and is now working 100% And the timer works also and orig lamps...

@vintageaudioaddict 2 жыл бұрын

Good Job! A lot of this older equipment just needs a little TLC to keep running.

@TheC5corvette 2 жыл бұрын

@@vintageaudioaddict My Eleven GX unit seems to run hot , even the vent grill on top has come loose on the case which i think could of been from heat.... Searching on here and other post on what i may look for . Bias adjustment ??

@jeremytravis360 4 жыл бұрын

In the UK a Company called Thorn Electrical Appliances made a food mixer with an international know brand of high end food processors called "kenwood". They protected the International brand name furiously.

@vintageaudioaddict 4 жыл бұрын

Interesting

@wakjob961 4 жыл бұрын

Good god...there's one on ebay for $899. Probably unserviced too. So many great old receivers in garages and shops up on a shelf covered in thick dust and shop debris still chugging along no worse for wear.

@vintageaudioaddict 4 жыл бұрын

Yes, the prices have been going up over the past few years. There are so many pieces of equipment just waiting to be discovered again.

@speidi1 4 жыл бұрын

I came across a non-working one of these. I sold it as is for $600. I should have kept it. Two manufacturers that don't get the respect they deserve: JVC and Kenwood.

@vintageaudioaddict 4 жыл бұрын

You are so correct. JVC and Kenwood made excellent audio equipment back in the day. You could throw in a lot of other manufacturers also. It was just a different time when electronics were made to last.

@dwoodog 4 жыл бұрын

Great video. I wonder how all that dolby and calibration settings work. I also saw a 400hz tone button.

@vintageaudioaddict 4 жыл бұрын

Thank you as always. Kenwood even had open reel and cassette calibration tapes available for purchase to help with the setup of a tape deck with the eleven III.

@jembolio 4 жыл бұрын

Hi there from spain, I have just plug my old kenwood eleven and I'm. Having some issues with the aux input. Is the sound level different with your aux input than with your phone1 one? When I connect an input in my aux, it sounds very low and weak. Thanks for your time!

@rickordway9466 2 жыл бұрын

Hi! This is a great restoration video. Just wondering how you accessed the lamp panel? I notice 3 rubber pegs on the circuit board. Do you just pry those out? How do you replace them? Thanks

@craiglabreche9902 3 жыл бұрын

Great video Are you in the repairs service Kenwood is a great product and one of my favorites Many thanks

@vintageaudioaddict 3 жыл бұрын

Thanks! I'm only a hobbyist and not a professional. I only work on the equipment in my personal collection.

@djob3507 4 жыл бұрын

Hermoso

@vintageaudioaddict 4 жыл бұрын

Gracias

@bobnevala5218 4 жыл бұрын

I understand the reasons for replacing the Capacitors, but you made no mention that you would be replacing the Transistors on this unit. What is the reason one needs to or does not need to replace Transistors. I've been watching for a few months now and have some equipment that I bought as Wedding Gift to give to my niece and her husband. I also have my own equipment that I will need to replace the Cap's on. Perhaps a video on how to read the info on the Cap's and Transistors and who you like to buy these items from? Thanks! I enjoy your videos very much!

@vintageaudioaddict 4 жыл бұрын

First of thank you for your kind words and for watching. Every piece of equipment is different to some extent. Every old electrolytic capacitor needs to be replaced, no matter if it's in a Mark Levinson or a Sounddesign. Transistors, diodes, relays are changed when there has been a track record of failure. You have to do your own research via the internet on any particular model. You will also get different opinions. I have done several different videos that may help answer some of your questions. I have provided the links below. Finding Vintage Stereo Parts - Where To Purchase Components For Old Audio Equipment - kzfaq.info/get/bejne/qtWUq6mmlsmUeGQ.html Troubleshooting Failures In Vintage Audio Equipment - kzfaq.info/get/bejne/qtWUq6mmlsmUeGQ.html Vintage Stereo Repair - kzfaq.info/get/bejne/hJmVbKZl0rvZmWQ.html Phono Repair And Troublesome Transistors - kzfaq.info/get/bejne/otGTg5SrkrHHgHU.html Hakko 808 Desoldering Tool A Must Have - kzfaq.info/get/bejne/hNqDocJ5tbqRo3k.html Hazards Of Reel To Reel Tape Deck Repair - kzfaq.info/get/bejne/gdyIqrFmzs3edJs.html Troubleshooting No Audio In Vintage Equipment - kzfaq.info/get/bejne/prGhq8-FntnLio0.html General Failure Troubleshooting In Vintage Equipment - ttps://kzfaq.info/get/bejne/rtFlms2imsvMe2Q.html Reforming Speakers - kzfaq.info/get/bejne/qtqSmsh1xs22pac.html Checking DC Offset On Vintage Amplifiers - kzfaq.info/get/bejne/kNxyotuZ1ceRpmw.html Why You Must Replace Old Electrolytic Capacitors - kzfaq.info/get/bejne/iMeHpbx7m8fRk3U.html

@bobnevala5218 4 жыл бұрын

Dear@@vintageaudioaddict, Thank-you for the time that you took to reply back to Me and with all of the Links that You took the time to provide! Yes, everyone has their own opinions, but when reading or listening to some of them on any given subject... I went to school and worked as an Auto Mechanic for many years, but no longer earn my living repairing cars. The worst problems to find are those that are intermittent on pretty much anything. Pretty much no one is making any money making KZfaq Videos. You are trying to do something positive for the next generation or so, but at some point in time this wonderful time when things were made with people sitting at a bench and assembling things will fall by the wayside. Not everything, but almost everything made today can not be repaired. If it can be repaired it will most likely cost more to do so than a new whatever will cost to buy new. And that is if you do the the work yourself. Never mind paying someone to repair it for you. You were kind enough to take the time to leave some Links for me and I will now do so for You. It is not really possible to pick just one song/performance from these women, but I'll do as best that I can. Keiko Matsui, kzfaq.info/get/bejne/g7JhaaeCptKpdWQ.html . Junko Onishi, kzfaq.info/get/bejne/j56GfqyG2si8nZ8.html Yoko Miwa, kzfaq.info/get/bejne/jLFda5Z02tu0ip8.html Chihiro Yamanaka, kzfaq.info/get/bejne/gK97aKufy5rHpJc.html Hiromi Uehara , kzfaq.info/get/bejne/obhoe8yfq8e1mJ8.html Sangah Noona, kzfaq.info/get/bejne/g7xpaM-ItLOmo3k.html Bonus Video, Just a bunch of Wild and Crazy Guys kzfaq.info/get/bejne/g7xpaM-ItLOmo3k.html Thank-you so much for all of your efforts, Kind Sir!!!

@DJ-Daz 4 жыл бұрын

This amp comes from a time when they knew how to make wonderful amps. They looked amazing too. Not the bland boring black that's around these days.

@vintageaudioaddict 4 жыл бұрын

I've with ya man. Anyone walking into a room has to take a look.

@javierdiaz14048 4 жыл бұрын

I just got the same beautiful unit Eleven III, all work fine just have a single issue that if turn few of the front buttons, right or left channel sound very low but then if touch any buttons the sound came back. Any clue how to fix that?

@PatFitzpatrick78 4 жыл бұрын

Just curious what are your thoughts on the Fisher CA880 ?

@vintageaudioaddict 4 жыл бұрын

I have never owned a solid state Fisher so I can't really say but I do have two vacuum tube Fisher's, a 800-C and 400 receivers and they are wonderful.

@jamescoulter7052 4 жыл бұрын

Vintage audio addict what size resistor do you use when you make your own LEDs?

@Matthew-pi6mt 2 жыл бұрын

My aux light is out. What do I need as a replacement? Easy fix for a novice? Thanks. Nice video and great work

@carlzonsmktg 3 жыл бұрын

Great job. How did you bypass the timer?

@samuelfellows6923 4 жыл бұрын

What did the timer do? - as you said, odd to have one on a receiver. I was looking forward to some tuning and analog meter action but all we got was a looping, left/right sweep of viewing it lit-up with it not doing anything ☹️

@bluelithium9808 4 жыл бұрын

Turned off the receiver.

@alcameron6071 4 жыл бұрын

Samuel Fellows He does that a lot. He gets a little too long-winded and rambles on sometimes. Would like to see more hands-on doing something and explaining to it rather than just reviewing it and listen to the rambling on.

@brianchisnell1548 4 жыл бұрын

My dad had Kenwood ham gear 60s -2017. This looks like it could contact Apollo 11. I always thought it was American. JVCKenwood. Damn. Never knew it was Japanese! The older I get, the more.......

@vintageaudioaddict 4 жыл бұрын

Yes, Kenwood made a lot of great electronics not only audio equipment.

@michaellarcom Жыл бұрын

I have a Kenwood model Nine G that looks close to that but the power meters are in the left upper corner. Now one of my buddies had did something and I had to have the power supply repaired and one of the channels and the guy have put some newer age parts in there and it doesn't sound quite like the older stuff so one side sounds louder than the other. I know it needs a good cleaning because because some of the parts and switches make popping and cracking noises but it goes away after you play with them for a while..

@vintageaudioaddict Жыл бұрын

Yes, cleaning the controls on vintage audio gear can clear up a lot of those intermittent issues. Thanks for watching.

@frankrutter6700 11 ай бұрын

Great videos. My name is Frank and I have a Model 11 and the selector switch is working but I must "wiggle" the knob to work on each selection. Some lights are out. Do you repair others equipment? Thanks for your time.

@TGBTG7701 4 жыл бұрын

Do you own or have worked on an Accuphase E202 integrated amp? I spent some time completely going through one, the end result was one of the best sounding integrated amps I have ever heard. I really enjoyed rebuilding mine, plug and play boards.

@vintageaudioaddict 4 жыл бұрын

Thanks so much for keeping her going. No, I haven't. Accuphase was/is great gear. There was so much wonderful audio equipment back in the day. Hopefully some day I can add a piece of Accuphase to my collection.

@norton750commando 4 жыл бұрын

Accuphase was started by an engineer from Kenwood back in the 70's. They are really high end audio, and even older units are still worth a lot.

@johnbishop6890 3 жыл бұрын

My Marantz 2285b quit making any sound from either spkr A or B outputs. Unit powers on and off no problem. Protection circuit still pings. FM meters show receiver has signal lvl and lock, but zero sound after multiple speaker connects and disconnects. Any ideas?

@vintageaudioaddict 3 жыл бұрын

I'm sorry about 2285b. It's really hard to say. With it being 40+ years old it could be a number of things. I'd google "vintage audio repair" and see if anyone pops up in your area that could take a look.

@TRUCKMAN-zg4xh 8 ай бұрын

I have a question where do the power for the timer come from l just got one with a timer disconnected

@rickstid-bits 2 жыл бұрын

Hello, I have my Kenwood Model 9G that I bought in 1979. I see everyone replaces the capacitors during a rebuild. My receiver still sounds good to me (except for the dirty pots). Why do people replace the capacitors? Is there a sound difference between my original capacitors and if I heard things after they were replaced? Thanks. Rick

@vintageaudioaddict 2 жыл бұрын

Hi Rick, Check out this video - kzfaq.info/get/bejne/iMeHpbx7m8fRk3U.html . I think it will answer some of your questions about why many people replace old electrolytic capacitors.

@rickstid-bits 2 жыл бұрын

Thank you. Do you have a video on cleaning pots, toggle, and push button switches? Are there 2 different types of Deoxit for these? I know you have some great equipment. I still enjoy mine. Here is a short video. kzfaq.info/get/bejne/mal7oLqm3LOuiKc.html

@singhfitness9310 4 жыл бұрын

I love dis kenwood receiver...its awsom.... can u plz tell me where would i found GE3-5267A boombox???

@vintageaudioaddict 4 жыл бұрын

Thanks. I'm not sure where you could find a boombox other then eBay.

@steventartakoff9393 4 жыл бұрын

great video. whats the purpose of that dolby section?

@vintageaudioaddict 4 жыл бұрын

Dolby was/is all about reducing noise. Dolby FM was something that never took off so that didn't last long. All the tape decks had their own Dolby built in so no need for it to be in a receiver like this Kenwood Eleven III.

@Ed-sh8jt 4 жыл бұрын

Thanks I guess mine is a 77 as well. One issue I do have with this receiver is when I switch media from Phono to Aux the all I heart is FM tuner sound in source. But when I have tape deck connected via REC/play inputs then I can switch ok from Phono to AUX but thru the cassette tape deck monitor. I used to be able to switch the input source it via the selector now it only switches when I have a tape monitor connected. Any ideas?

@vintageaudioaddict 4 жыл бұрын

Your welcome and thanks for watching. I don't know off hand what the issue would be but have you unhooked your tape decks along with your other devices, turntable, CD etc. and then hooked them up again recently? You can get some unusual symptoms if something gets crossed up, tape rec/play etc.

@Ed-sh8jt 4 жыл бұрын

@@vintageaudioaddict Yes this all started when I recently connected a Pioneer fl900 cassette player when this issue started.

@07kllrbud59 2 жыл бұрын

I just found a II thats played great, UGH I broke the timer,,,, it played for about an hour. can you twist it back to reset and the unit will turn on ? I thought I read that somewhere , if not I guess I have to cut the 2 wires, whats the best way to do that.... This thing was sounding good....

@cuttinthroats 2 жыл бұрын

My timer is also broken on my 10000 iii which is effectively the same as this unit. I found a guy on ebay who 3-d prints the plastic coupler. If you wanted to keep the timer function go that route. If you want it to play without the timer just snip the two wires and connect them together like mine is bypassing the timer function. I think those are your only two options as there is nothing turning the timer without that plastic piece connecting.

@07kllrbud59 2 жыл бұрын

@@cuttinthroats I fixed it , well I rigged it up !! LoL . I opened it up and turned it over and took the bottom off. I could spin up the timer pretty easy from the bottom side. I spun it up al the way, and took a little tie strap and locked it the timer wide open, been going strong ever since . I just didn't want to cut the wires.

@07kllrbud59 2 жыл бұрын

@@cuttinthroats how did it workout , did it work good. yes I'd like to get one too. I didn't cut the wires and was hoping I could find a new coupler. do you have contact info for him.

@saqibsami7967 4 жыл бұрын

Opinion on Kenwood ka-8006 .

@vintageaudioaddict 4 жыл бұрын

Kenwood made a lot of great audio equipment and the KA-8006 is one of them. I'd grab one for my collection in a minute.

@dougtaylor7724 4 жыл бұрын

I have one. Still running like a new one.

@kennethiman2691 3 жыл бұрын

I have the Model 11G. Everything works including the timer. But sounds meh. I realize the caps need to go. But this monster is complicated. The M.A.C. is a weird feature. I seem to lose a channel when it is selected.

@Ed-sh8jt 4 жыл бұрын

I have one of these how do i know what year it was manufactured?

@vintageaudioaddict 4 жыл бұрын

From what I've heard this receiver was manufactured in 1977. I'm not sure if you can figure the exact date from the serial number or not.

@matthewdempsey6583 4 жыл бұрын

There should be a manfacturing date on the back of the unit with a label saying the date it was built

@michaellarcom Жыл бұрын

Tell us what's the difference between that Model and the KR? Only thing I figured out was the Model was the silver face with the wood case and the KR was a gray face with a metal BLK case but the internals was the Sam

@vintageaudioaddict Жыл бұрын

They both were really well built. I really not sure all the differences as they were both designed around the same time.

@tiredoftheb.s. 4 жыл бұрын

I had a old kenwood klr 9400 series loved it till it was stolen.

@vintageaudioaddict 4 жыл бұрын

So sorry to hear that.

@tomm9176 4 жыл бұрын

I have a model eleven that has the same problem. Sound shuts off then comes back on. I'll look at that relay. Thanks

@vintageaudioaddict 4 жыл бұрын

Your Welcome.

@BigTrout420 4 жыл бұрын

I have a broken eleven GX and I’m trying to get it refurbished. It’s in bad shape. I really don’t know what to do with it.

@shanelair9172 3 жыл бұрын

How much do you charge to go through one and clean it up for me?

@chrismenza7023 Жыл бұрын

Hey man I have the exact same receiver. I need the volume potentiometer and I cannot find it anywhere: R11-9005-05 Variable resistor 100k ohm(B) x 2, 200k ohm(W), Volume, Balance. Would you know anywhere I could find it? Im desperate at this point.

@vintageaudioaddict Жыл бұрын

I would checkout eBay. Sometimes you can find folks who are parting out vintage stereo equipment.

@dnate697 4 жыл бұрын

I had a Super Eleven:)

@vintageaudioaddict 4 жыл бұрын

Nice!

@hilariolozano4550 4 жыл бұрын

Are you going to sell it

@vintageaudioaddict 4 жыл бұрын

Thanks!

@Menieres4Life 3 жыл бұрын

I have a Kenwood Nine G, it belongs to the family of the Elevens, also has the timer. I got it over 10 yrs ago and ended up putting it in storage, never had extra room to set it up. The guy I got it from said these were only available overseas to our servicemen and women and that’s the reason they came with the timers. Is there truth to that? I have not a clue but the guy said that was his situation of getting it and brought it home when he was done his service.

@jayyoung5423 4 жыл бұрын

Not an air compressor unless you have a drier on the output....

@vintageaudioaddict 4 жыл бұрын

She was in a Florida attic for years so she's okay with moisture, LOL. Seriously, thanks for watching and commenting.

@sergiobisonte 2 жыл бұрын

my father has this amp

@vintageaudioaddict 2 жыл бұрын

He has a good one!

@sergiobisonte 2 жыл бұрын

@@vintageaudioaddict at the moment speakers not working.. i think its the same problem.. vu meter moves but no sound... at the previous workshop they broke the tuner rod and cord... now its on another shop