The one thing this video doesn’t describe is the red Gasket. Basically if you have a 5 needle brewer you are going to want to remove the red gasket entirely. If you have a 1 needle brewer you want to make sure that the gasket is installed and each of the 4 holes are plugged. They don’t tell you this because they wanted it to be “automatic” in that the product would come with the gasket plugged then if you had a 5 needle brewer the needles would push the plug open and allow water to pass through. Wish they were more transparent about it but the product is already crazy confusing due to the vast amount of different brewers keurig has made over the past 30 years.

Thank you soooooo much for this video. We were trying everything to get this lil bugger to fit. Now we can brew our favorite coffee...👍👍👍

Thank you so much super helpful! Now we can enjoy my good coffee.

Thank you so much for this video! I was so frustrated trying to get it to work

Thanks for this video to explain how to use the reusable filter. It’s step by step made this an easy project.

I bought one just like this. And just got the reusable filter for after using pods for a few days. I’m beyond excited to finally have one. It’s been my dream coffee maker for years. I’m in love with it. Coffee tastes so much better lol.

The universal pod has terrible instructions and does not clarify any of this

Much appreciated video. Thank you

Thank you for this...I couldn't get the gray basket to FIT until I realized that I needed to REMOVE the BOTTOM adapter (which also goes up one side) before it would fit.

Well duh. So easy after watching this. Thank you!!!

Great presentation, this helped me get it right, thank you!

👍🏼 Thank you! I've been fooling with this stupid thing all day, and I still couldn't figure it out!

I wish it was evident in the instructions when you buy one of these damn things. There was none of this info in the instruction booklet for the coffee maker or for the filter.

I just spent 1.5 hours, including coffee being dumped all over, trying to figure out how to fit this damn thing in my machine...lol - when the instructions said remove pod, I ASSUMED they meant the previous coffee pod i had for my breakfast cup of Joe. lol Can't wait to try it now !

Multi-stream brewers appear to need the red plug removed. Also the k-supreme apparently isn't really a "PLUS" model so does not need the adapter. Worst instructions ever. There are no paper filters available for this k-cup either so back to the issue of much sediment in my coffee :/ I used some disposable paper tea bags in it and really made a big difference in flavor and no sediment. Just fussy to fill, so proper fitting filters would really be nice. I love all the brewing options on the k-supreme. I am finally able to get a stronger cup of coffee from my Keurig! I am also glad that I didn't opt for the model down. The programmable favorites is really handy. (which I actually thought I wouldn't need because it is just me)

Wow!! Thank you!! I can finally enjoy fresh coffe. Thank you Sincerely!! I liked and subscribed. You're awesome!!!

Thank you works the way it should work now

The one i received is bigger that the space of the kpod

Thank you so much!

Very hydrating!

Does the My K-Cup Universal filter fit in the K Express essentials single serve coffee maker?

I have a K2.0-200 model. I used a cheap reusable pod for a few years until the mesh filters started leaking, so I bought the Keurig cup seen in this video (Kroger had it on clearance for a fraction of the original price). I used it exactly as seen here. After 3-4 months I began to have a problem with it. The lid would not stay locked on once it was in the machine so it would come off separately from the rest of the pod. I thought it was a defect so I ordered a new one. Same thing happened. I realized that over time and frequent use (2-3 times/day) the lid begins to get bent out of shape and no longer will align correctly on the cup to lock. It turns out it WAS a design flaw. It doesn’t fit properly in the machine. It appears to, and it makes the coffee ok, but it wears out way too fast. Has anyone else had this problem?

How do you remove the K-Cup Pod from the brewer? It looks like you pushed a release?

Please help!! I need to know WHY you need to fill to the max line and WHAT SIZE of coffee is recommended for that max line. If I want a teeny tiny coffee in the evening it seems wasteful to fill the pod to the top and the coffee would likely be too strong but is the pod large enough to make the largest size without it being weak? I can't seem to find answers to these questions anywhere online so please respond to this, @KeurigCanada or anyone else reading this post. Thank you!

Thank you!!

I have a Keurig Vue machine. The model is V1200. I can't seem to get it to work with the filter. Every time I inserted and close the lid it says that the machine is not ready. But if I take it out and close the lid with nothing in there the machine works just fine.

What about the red gasket that blocks the 4 holes? Why is this there? My testing with a My K Cup Supreme model, IF you have a 5 hole machine, like I do, remove it, because leaving it in produces a deluge of water around the outside of the pod. If you have a single hole machine leave it in.

What’s the purpose of the red rubber seal under the lid for? Just curious ? Are you suppose to remove or just leave it on?

Hi Keurig Canda, I have a little complaint. I have a Keurig Supreme Plus Smart coffee maker and it appears that as soon as the printed scan code on the K-Cup lid wears off the laser in the coffee maker will not recognize the K-Cup. I have two, one new with all the printing still on, and one that's about a year and half old. I used the last one with my previously owned K Supreme Mini and all the print wore off but it still worked. But not in the Supreme Plus. It just asks if you want to make hot water. Is this a known problem because I now have a useless K-Cup and know that my new one will also become useless long before it wears out? I can't think up a workaround that wouldn't involve toxic substances.

Mine leaks like a siv. Theres unfiltered clear water that is getting through somewhere....trying to see if theres a fix or if i should just return it

I am using as the instructions say and as this video says to do, but mine is dripping BOTH coffee and overflow hot water into my cup! Is this normal?! It's happening EVERY TIME. I have the model that as the coffee pot and the individual cups options . . . .

Thank you I now and use my Hazelnut👍🎈

Thank you thank you thank you🥰

The pod with the adapter doesn't fit in my K-mini Plus, only without it. I'll assume it's not a Plus series, which is weird because it has "Plus" in the name.

Will this work with the carafe for the 2.0 ?

Thanks!

I am still getting coffee grinds in my coffee and I am only fill it up to the max line.

How to keep sediment from coffee showing up in coffee?

If your Keurig brewer has a single needle, you would keep the red gasket on. Be sure to have it on correctly (there is a wider side and a narrow side, it will only stay put if it's on correctly) and make sure each plug is fully sealed in it's opening. This will keep coffee from going all over from those 4 additional holes. If you have a 5 prong Keurig (like the one in this video) you would just remove it and that's it. I have a Keurig Slim, so I have to keep the red gasket on. Hope this helps!

I have questions. It says it is for all the Keurig machines but I have the Slim. Is there something I need to know before buying this product? I really want to use my grounds as well as the k-cups.

bought my keurig and the reusable at the same time a month ago, the universal now leaks around the top.. is this normal after a month of use and how is this fixed ?

I bought one for my k-mini,if I fill the cup to the max,how much water should I fill?

is this for fine ground coffee?

It was that clip (which is black in USA so it blends in) that was stopping me from having this work but I got it now

This helped

just got the supreme tried with and without red plugs in the adapter. with the plugs in water spilled over so i will be leaving it off for now.

What is the difference between one of these, and one of the little mesh Keurig baskets that you can use and rewash

@Rob Sasena "RED GASKET" has to be removed or else it will make a mess and not brew correctly. Thanks Rob

What is the adapter for?

Don't you have to remove the red rubber stopper inside the filter before brewing?

Removing the red piece does help from water spraying everywhere with the 5 needle makers but coffee still doesn’t taste like it should

I would love to learn the official answer to this as well,though it appears that the additional 4 "nozzles" push the red gasket "plugs" out of the way when you close the top of the brewer.

Do you need to take out the red rubber gasket when using with the Supreme or Supreme Plus?

Mine doesn't have a max line at all, just a ridge very close to the top, much closer than where the max line would be like in the video.

Hi, I just buy a Keurig K Mini Plus and a K-Cup. But the K-Cup fell inside and now is trapped. Help Me!

I know the label SAYS it works with all “home brewers”, but has anybody personally tried using one of these with the K2500 commercial brewer? If so, did it work?

I did this and my coffe splatters alllllll over doesn’t even make it into the cup and the little that does it’s full of coffee grinds???

Is this the same size as the pod used in the Carafe? I was using paper filters in the original, and this My-Cup is a little bigger, where they’ll no longer fit. But there are other, larger paper filters used in the Carafe, which I don’t have. Wondering if I can use those if the Carafe pod and My-Cup are about the same size? That way I’m not forced to choose enhanced 5-prong flavor over leftover sediment!

I fill mine all the way to the top. My Keurig uses just one hole and I have never had any problems. So it's possible to add more coffee to the filter than the max line level.

This doesn’t answer my question on wether or not I need the red thing on the lid.

What about cleaning? DIshwasher?

So why not just buy regular $15 coffee maker?

Thank you I was about to throw it in the trash before I seen your video

mine leaks and drips from around the hole where the cup goes in even after taking the red rubber thing out.

Over time and despite cleaning after each use, coffee builds up on the bottom of the filter slowing the coffee pass-thru when it is brewing.

what is the point of the adapter if you just have to take it off to brew the coffee?

Mine doesn't fit because of the pin on the bottom. Are you supposed to break the bottom by the pin?

I find i get residue in my coffee with this k cup. Anyone else experience this?

Mine doesn’t fit in my keurig???

I didn’t see what too do with the red plug.

MINE WON'T FIT!!!!!! WHY? I'm doing everything the video says but it's not working. Why can't they make it to where you don't have to take anything out to put the filter in?

doesnt work for k cup supreme

So we have the K-Cafe and I used the new my K Cup for the first time this morning and there were grounds everywhere. Unfortunately, you have to make sure the red silicone thing is pushed in all the way to seal the whole top. I wish they sold two different ones.

Thank you for this video it helped. I’ve had The K supreme Plus for year. I’ve taken care of it properly by descaling etc. Just used the reusable k cup. Stupid design! Lately my machine when it’s running spits all over the place and makes a mess! just water streaming sometimes coffee will stream. Not happy with this machine at all or the K cup reusable ! This was sent to the company . DO BETTER KEURIG!

Can I use this with my k-mini?

if they all use the same k cups, why would a "2.0" model need an adapter? Why not just make a filter that fits them all the same way, just like the k cups fit them all the same way????

Get an electric kettle and a pour over funnel. Quickly brew a cup of coffee without fussing with this.

Call me crazy but this universal adapter does not work on my Keurig and I have the exact one that's in the video

I can’t take the cup out

apparently you don't need a filter but if you don't use one then you end up getting grounds down your sink drain because you can't get them out fully just by shaking over the trash can.

BeenThere

the My K-Cup is now stuck in my Keurig and I can't get it out!!! The whole Keurig cannot be used.

Anyone else has water leaking while using this? My kuerig is brand new.

Doesn't fit a K35 machine.

Here is an updated video demo I made illustrating the way to use this filter. Including the red gasket: kzfaq.info/get/bejne/nKl6qqSlmrLTeX0.html

This is my second Keurig Coffee Brewer. kzfaq.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first one lasted 6 years. It worked beautifully until the day it didn't. It was hard to go back to the drip coffee for a couple of days while I waited on my Keurig to get here. There is a huge difference in the taste. Keurig makes a really good cup of coffee. This new one is a little different from my old one. I find putting the water filter in was easier than on the old one. Attaching the water reservoir was also a little different but once I figured it out, it too was easier. This new one has the auto off feature but is not programmable like the old one. Only three cup sizes instead of four. The odd thing for me was how much lighter in weight this one is compared to my old one. More plastic and much less metal in the construction of this one. The price is so much less than the original Keurig that I bought and the coffee tastes the same so all in all I am satisfied.

Also see my video on saving money on your next cup of coffee.

Doesn't work 😭😭😭😭

I am sorry to hear that you have a very bad. Sour throat BUT eye enjoy the music very much. Thanks

That's their business: to keep individuals frustrated at all levels of life; to keep everyone struggling with everything all the time! You see, it all adds up, at the end of the day🤔

You didn't show how the pouring coffee just dribbles all over...

Just in case anyone still can’t figure it out. Push it from underneath the pod and push up.

to use the red plug pad or not...that is the question.... does anyone else have coffee splattering all over the place?

Does anyone notice it makes less of a mess without the red plug or is it just me?

If you have the type of brewer as shown (with four water spouts) you also NEED to REMOVE THE RED PLUG on the inside of the basket lid, otherwise the four water spouts won't work correctly. BTW the instructions included with the Reusable Filter are WRONG.

Deer Keurig, I returned your coffee maker because you did not include a reusable filter so that I can use my own coffee. I ended up with a lot of headache trying to find a filter that worked but I did not succeed. You are fired.

Worst design EVER!! The lock doesn’t hold!!! It blows out consistently, leaving a huge mess inside the brewer, which, in another design mishap, is a big pain in the ass to clean up... Can’t wait for someone to design a better one off brand...

Make your dang keurigs hotter . I add a little creamer and its luke warm. And the new heat settings are a joke and do nothing i tested all three with a thermometer. All for looks does 0. Make the machine hot. If you worried about a law suit make a unlock feature a user has to unlock so there aware and can not sue. I like hot hot coffee not cold.

Lego coffee maker POS. Tried to use it in an airbnb home, gave up and went to get mr. Coffee.

This did not help