BEST Front Lip for a Daily Driven GR86

No video

BEST Front Lip for a Daily Driven GR86

Рет қаралды 24,309

Күн бұрын

HT Auto GR86 Front Lip: www.htautos.co...
Front lips often get destroyed on daily drivers due to the abuse it can be subjected to. Let's test out a more affordable and durable alternative to a carbon fiber front lip. The HT Autos front lip looks great and will hold up to the daily abuse!
Driven Media Merch & Overlays:
► www.driven.med...
►GR86/BRZ LED Upgrade Kit: www.driven.med...
►GR86/BRZ Reverse LED Upgrade: www.driven.med...
Discounts
Dress Up Bolts
► Use code KV23 to get 10% off on www.dressupbol...
3d Floor Mats
► Use code "KEVIN3D10" to get $10 off on 3dmatsusa.com/...
Import Bible
► Use code KV23 to get 10% off on importbible.co...
2022 TOYOTA GR86 MOD LIST:
»$35DIY 4th Brake Light: amzn.to/3SRG3L8
»Positaps: amzn.to/3SRAQTl
Bride Stradia III Seats
Sayber Design Carbon Fiber Front Lip
FactionFab F-Spec Coilovers
Cusco Strut Tower Bar Front
Cusco Strut Tower Bar Rear
Cusco Front Lower Control Arms
Cusco Adjustable Rear Lower Control Arms
Cusco Adjustable Rear Toe Arms
Cusco Rear Trailing Arms
Cusco Rear Upper Lateral Control Arms
ARP Extended Wheel Studs
5mm Wheel Spacers (Front)
Yokohama Advan TCIII 18x9.5 +45
Kumho V730 255/35r18
ECUTEK E85 Tune w/ Graham from Boosted Performance Tuning
Compressive Tuning Carbon Fiber Engine & Fusebox Cover
DressUpBolts Stage 1 Engine Bay Titanium Hardware Kit
Perrin CAI
Verus Engineering AOS
Verus Engineering Oil, Coolant, Washer Fluid, Brake Fluid Caps, and Cam Sensor Covers
Tomei Type D Dual Exit Catback Exhaust
Circuit Demon Custom Headlights
JDM Clear Sidemarkers
Twins Carbon CF Center Console, AC Vent, Steering Wheel Covers
FOLLOW ME:
►Instagram: / thekevinvo
»Music I use: share.epidemic...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 137

@cyclistman6358 Жыл бұрын

Ramps to enter and exit your driveway. That’s gotta be a major PIA. What we must endure to look good and MOD.

@cyclistman6358 Жыл бұрын

Wrap electrical tape around your drill bit as a drill stop so there’s no chance of drilling to deep.

@Focus_SV Жыл бұрын

You may already know this quick tip, but for eurathane lips like this, use tire shine on it after you clean/dry the car, will make the black deep again if it starts to discolor. Learned this with my miata lip

@ArmySigs Жыл бұрын

A ceramic coating like Gyeon Trim is a much better solution. Had it on my car for 4 years now and still looks like new without needing a re-application.

@jensenmiller6410 Жыл бұрын

Kevin, I don't watch a lot of your videos but I just wanted to send you a heartfelt thanks. A while ago you did a video on the rubber plug on top of the trans falling into the rotating clutch assembly of the gen 1's. After seeing your video I kept it in the back of my head to check that plug any time I did an oil level check. Well, today I did an oil check right before I was going to go on a 200 mile trip across the state and sure enough that plug had worked it's way up and halfway into the port and was in danger of falling in. Thanks to you I avoided any potential damage and PITA on a trip so thank you very much!

@xxtrengt8871 Жыл бұрын

This lip looks great and is way more afordable, will definitely consider buying one (still waiting for the car atm, in France the delays for GR86 are insane, 20 months to get one more or less). I really thank you for sharing with us all those great and tasteful mods 👌

@DylanTK Жыл бұрын

My issue is where it meets the bumper. To me it looks like it's for a different car or something. I guess I prefer a design where it's molded to meet the edges of the stock bumper because it looks more like it belongs. Keep up the good work Kev :)

@KevinVo Жыл бұрын

That's definitely a valid opinion to have! The Sayber Design lip I had on the car did a really good job of that.

@DylanTK Жыл бұрын

@@KevinVo, that it did, but I would have swapped it the same as you. Hope you find a lip that does everything you want it to!

@thefloppe123 Жыл бұрын

Finally a nice affordable lip with EU shipping as well!

@warlockd8660 Жыл бұрын

Love this lip! Accentuates the bumper perfectly. Just brought home my '23 Pavement GR86 the other day... Love your videos G!

@bry4sh0rt Жыл бұрын

Nice! I went with the Pavement option as well and picking it up this Saturday. I can't wait!! Pavement bros.

@casgarage Жыл бұрын

Hey Kev, thanks for the suggestion! I think this lip looks great and i can let it rub all day long without worrying. Just bought it!

@bubba02 Жыл бұрын

That's clean and subtle and smooth. I used the oem subaru sti lip for my 2018 brz and same words as before. No need to worry about fitment. Looks awesome

@Edward-jx7pl Жыл бұрын

I don’t know why but you filming outside is sooo much more vibrant instead of the garage 😅. The colors in this video are 💯

@KevinVo Жыл бұрын

It's nice to be able to film outside without freezing to death now haha

@BenjiDubss Жыл бұрын

That quick jack is fire, like having a mini lift!

@KevinVo Жыл бұрын

It's definitely worth the investment for me.

@andrewharris7868 Жыл бұрын

It's very clean! I had the same issue, driveway scraping. I went from a lip to splitter and I absolutely love it.

@Kelvin-ve7jt Жыл бұрын

The Lip looks great! Keep up the videos, love the amount of things you’ve tried to put on this car to help us build ours. Curious as to how the new exhaust is holding up? Considering the single exit one but am afraid of the tin noise, especially after headers and further performance mods. What are your thoughts?

@jonchiem Жыл бұрын

Yo.. this lip looks gorgeous with your front bumper bro!

@KevinVo Жыл бұрын

Thank you!!

@xferrer5132 Жыл бұрын

Keep it up. Youre the most 86 enthusiast of all 86 enthusiasts. Eff what everyone else says. Wish the best for you and your channel. Keep it up man.

@gabeh711 Жыл бұрын

Dang looks awesome!! Where's the 22+ BRZ version though!!!????

@KevinVo Жыл бұрын

I'm sure they're working on it!

@KrispyKruiser Жыл бұрын

I like the verus front splitter. I like the rods look, idk why. Wanna get it and eventually remake the splitter out of carbon fiber though and try doing carbon fiber for the first time on a relatively easy mold.

@nicklauher9323 Жыл бұрын

Just placed my order! Thanks for the lead, Kev

@TheZomfatherPtii Жыл бұрын

That lip is fucking dope. Got that OEM+ look to it. Love how it compliments all the black accents on the front bumper.

@KevinVo Жыл бұрын

Definitely one that'd I'd recommend!

@charlesxchaves Жыл бұрын

Daaamn, looks good fam!

@wrxrcr1 Жыл бұрын

Collared bit works great for that.

@Red-Rob Жыл бұрын

I've seen people complain about the way it looks kind of separated or tacked on to the bumper and less like a natural extension of it but I actually kind of prefer that on darker cars. Like this would look great on my black 86. Hell I think it looks good here it just needs something else on the sides/rear to tie it in better.

@PBrooksSawyer Жыл бұрын

Got a black one as well. Something to consider.

@roger3958 Жыл бұрын

If I had a GR, I would definitely buy that. Nice work.

@MattAnonymous Жыл бұрын

Not bad for the price but I wish it followed the lines of the bumper a little more. Could it be a patent issue?

@stevef3521 Жыл бұрын

Looks great! Thanks for the content.

@CAMOGOD Жыл бұрын

Big Kev upload lesgoooo

@kiddingh9874 Жыл бұрын

looks so good bro

@FA24D Жыл бұрын

Looks really good!

@BikesCarsAndSake Жыл бұрын

Thank you for another great review and pointing out things to watch for!

@stinoo8 Жыл бұрын

would try some good 3m double adhesive tape for the tricky middle part

@KevinVo Жыл бұрын

It comes with some preapplied!

@yamoisredeemed Жыл бұрын

Imma need the link to that Jack stand my boiii

@KevinVo Жыл бұрын

Quickjack 5000tl

@tomaspesica. Жыл бұрын

You have i new camera? Its so crispy😍

@KevinVo Жыл бұрын

Nope, same camera! Good lighting that day haha

@Menace_sti Жыл бұрын

That wheel fitment kevin lol. That has to be next for the gr86

@KevinVo Жыл бұрын

New wheels soon!

@Dr_Lord Жыл бұрын

The front lip is a must.

@KevinVo Жыл бұрын

Absolutely!

@Dr_Lord Жыл бұрын

@@KevinVo I went with the Toyota GT86 / Scion FRS Body Kit. Front Lip, Sides, Rear Spats.

@WRX_Panda Жыл бұрын

Looks great!

@MR3DDev Жыл бұрын

Looks sick.

@KevinVo Жыл бұрын

They did a great job on the design!

@Tinyzkid Жыл бұрын

best mods for daily drive would be a good video

@BOTDDNA Жыл бұрын

Waiting for a brake upgrade video❤

@JuanAntonEgo 3 ай бұрын

Great Content ! Just acquired an 2024 GR86 couple of weeks ago. I have inmind this Front Lip for it. Also, what front tow hook License plate mount is that on ur car?

@joshuae.m.wright7566 Жыл бұрын

I think you could use some wider ramps to leave your driveway haha.

@josevelasquez8991 2 ай бұрын

Hi Kevin, thank you for this video. Could you please drop name/link for the ramps you used on this video to lift your car off the ground.

@backroadblast6603 Жыл бұрын

When did you change your wheels? Car looks spectacular as always

@KevinVo Жыл бұрын

I sold the wheels that were on the car. New ones will be on there soon!

@backroadblast6603 Жыл бұрын

@@KevinVo nice. Look forward to seeing them

@bry4sh0rt Жыл бұрын

Looks great! Good price too.

@rasldazzle3810 Жыл бұрын

Nice Video

@KevinVo Жыл бұрын

Thanks!!

@Joe_Av Жыл бұрын

Nice looking front lip!! I'd totally rock it and buy right now, however.... judging by the vid my driveway is at a steeper angle than yours so if you barely cleared it with minor scraping then I don't think it'll work for my driveway 😢 Maybe I'm just destined to not be able to install an aero kit. I could do side skirts but I don't think it'll look right without a front lip. Front lip without side skirts would work but the opposite, I think will look odd. What do you think?

@henryfung4056 Жыл бұрын

u dont have OFF so the mosquitoes doesnt bite u?

@kacha6st Жыл бұрын

We need more bloopers brother!!! Lol

@kenadams297 Жыл бұрын

Why did you buy the GR86 ?...If it wasnt for SUBARU BOXER engine the BRZ/86 Project would never have started...the SUBARU BOXER engine is the heart ❤ of the car...plus...SUBARU are doing all the hard work...and building both 😮😮 !...good to see the BRZ outsells the GR86 at more than 2 to 1 😊

@KevinVo Жыл бұрын

I like how it looks better haha

@rickrolled2691 Жыл бұрын

Looks great

@WBANGA Жыл бұрын

Need some slip lo!

@Crisnorik Жыл бұрын

nice lip

@natsukashii__854 Жыл бұрын

Where did you get that plate holder?

@KevinVo Жыл бұрын

From a company I can't recommend unfortunately.

@natsukashii__854 Жыл бұрын

@@KevinVo oh okay understood is there any front plate holders you can recommend? I’d rather not drill the front

@bubbleteayo2749 5 ай бұрын

If you install this lip and decide to get something else like infamous aero/aeroflow/sayber/etc - would it be hard to install a new one? I feel like the holes wouldn't line up and since you drilled them it'd make it tough

@daniellocke9534 Жыл бұрын

How were you able to reach your hand around to install the nuts and bolts?The underneath looks pretty closed in?

@meandmym Ай бұрын

@KevinVo Did you have to remove the under tray and bumper insert to be able to drill and use the bolts/nuts to secure the lip? Thanks!

@MadelnMachines Жыл бұрын

Do you have to drill? I don't really want to if possible.

@kodyYT Жыл бұрын

Is there an ETA for the Full LED Upgrade Kit to get back in stock? Looking to get one for my hands but saw it was sold out. Great vid as always!

@KevinVo Жыл бұрын

Should be about another week or so. I may have some spares though so if you message me on IG I can help you.

@lordstatic361 Жыл бұрын

Hey family how does she do in these Iowa winters? I’m in Davenport and I literally just copped a gr86 yesterday I love it my only concern is the winters get nasty have you had yours through a winter here yet or no?

@darylcunanan8972 3 ай бұрын

does it suits to BRZ ZD8 as well?

@kikiin7 Жыл бұрын

Love it 😍

@mmo8988 Жыл бұрын

Don’t forget safety glasses next time

@aerowick4643 Жыл бұрын

Going to get the Varis Arising 2 front bumper once they release it? I believe they just released a picture of it being made on their IG 😮

@KevinVo Жыл бұрын

That's too rich for my blood lol

@aerowick4643 Жыл бұрын

@@KevinVo haha yeah I'm sure it'll be pricey 😭

@MichaelAMyers1957 Жыл бұрын

Will this fit on a 2017 86 ?

@atpgarageatl Жыл бұрын

Nice lip! What’s your opinion on the latest engine failure that’s making the rounds on the internet? Do you think the engine in the GR86 is reliable?

@raulvenzor5699 Жыл бұрын

Whats latest engine failure? Is it the rtv issue or are you talking about something else?

@atpgarageatl Жыл бұрын

@@raulvenzor5699 there is a new video of a guy on the track with his GR86 and the engine blows.

@ToniDella Жыл бұрын

Looks very nice, but I would run def the other one for sure😅😂.

@KevinVo Жыл бұрын

You like to live dangerously haha I like it!

@anthonymcclain8264 Жыл бұрын

He should wear eye 👁️ protection!

@cmitch8667 Жыл бұрын

What happened to the Advans? I see that you've moved back to the 17 inch silver face stocky bois.

@KevinVo Жыл бұрын

Sold them for something different! You'll see soon!

@romeoally7266 Жыл бұрын

Hey Kevin is it possible to get auto folding mirrors on usdm gr86? Not really a must have feature but I thought it’d be cool to see if possible.

@Killswitch85 Жыл бұрын

Nice. Just bought for mine in uk 🇬🇧. Do you have a link to yours alloys? Look dope.

@nathankim9170 Жыл бұрын

Those are the OEM 17s that we get on the base model in the US

@KevinVo Жыл бұрын

Those are my stock wheels haha

@Killswitch85 Жыл бұрын

@@KevinVo oh, ha. we only got the premium edition in uk so black alloys.

@ad_182_uk Жыл бұрын

So if you fitted 18’s back on clearance would be less of an issue on and off ya drive maybe?

@nathankim9170 Жыл бұрын

@@ad_182_uk probably not because the tire that comes oem is a 215/35R18 where as with the 17 it’s a 215/45R17. The total diameter is about the same so there would be negligible difference

@tonyespinoza6978 Жыл бұрын

It looks good but, would it fit GR 86 2023 special edition 10th anniversary? Please reply & would you provide me with info on how to go about ordering one also door edge guards and lubbers for rear window thank you,

@KevinVo Жыл бұрын

Yes it should fit just fine on any GR86. You can order on the HT Auto website. Not sure about louvers though

@Blballerboy Жыл бұрын

Kevin did you see another 86 engine blew on track and Toyota wouldn’t cover it? Thoughts? Should we be worried?

@KevinVo Жыл бұрын

I think I saw it mentioned, but really didn't dive too far into it. That's still just one more case versus the large amount of cars out there with no issues currently. I'm not too worried about it.

@Blballerboy Жыл бұрын

@@KevinVo thanks a lot for responding 👍🏾. Should have mine in the coming weeks finally

@CarsOverPeople Жыл бұрын

@@KevinVo Can you please make a video on how we can improve the reliability of these cars? I know you’ve already done 2-3 videos on air-oil separators & dual radiators but maybe make 1 video grouping all them together? Like adding a magnetic oil plug, dual radiator/oil cooler, oil baffle plate, catch can, etc. etc.

@miguelm3676 Жыл бұрын

Hey Kevin What’s the brand of the lip again?

@Yoyo86ix 10 ай бұрын

ht autos gr86 front lip

@AceWarthog32 Жыл бұрын

Hey ive just discovered your channel after purchasing a 2022 GR86 and am in need of some help. Do you happen to know if the last gen 86 rear window, not the sides, louver will fit the gen 2s?

@KevinVo Жыл бұрын

I don't believe so.

@bluelacyseo8964 Жыл бұрын

how long did the lip take to be shipped to your location from the UK?

@KevinVo Жыл бұрын

Not long at all. I want to say 2ish weeks if that?

@PBrooksSawyer Жыл бұрын

Kevin did you sell your wheels?

@KevinVo Жыл бұрын

YUP!

@user-ls4mu2my5c Жыл бұрын

What do you use to lift up your 86?

@KevinVo Жыл бұрын

kzfaq.info/get/bejne/erChpbJjsNutkWg.html

@danielgarciarascon1928 Жыл бұрын

Kev do you have a discount code?

@KevinVo Жыл бұрын

I don't. Sorry 😞

@Julianklaus Жыл бұрын

What is the purpose of a lip?

@KevinVo Жыл бұрын

Mostly aesthetics.

@phijef89 Жыл бұрын

I like it better.

@diegodellavalle2501 Жыл бұрын

Hello guys, Please can you give me your full e-mail for some request on your carbon fiber parts for gr? Trying to contact you but can t find the complete mail. Thanks Diego

@KevinVo Жыл бұрын

Info@driven.media

@diegodellavalle2501 Жыл бұрын

Thank you kevin