DO NOT BUY Old Ink Blacks Anymore! Get the NEW ONE Instead!

Рет қаралды 156,595

Күн бұрын

#Keybored DO NOT BUY Old Ink Blacks Anymore! Get the NEW ONE Instead!
It's been a long long time since the Venerable Gateron Ink Blacks have dominated the "Thoc" Linear Throne, and for good reason. It's good looking... it's smooth... and best of all... it's got that deep deep thoc. BUT... It's 2021 now... and it's getting old. THERE IS A NEW ONE! The Box Ink Black (and Pink).
Made from a new mold and stem, the new Box Inks are much better than the standard Ink Black V2s in pretty much every way... don't buy the old mold anymore and buy the new version!
I also created a Discord Server so check it out!
/ discord
Chapters
Start - 0:00
Intro - 0:18
New Box Inks - 1:54
Test Rig (Portico) - 3:10
Sound Test - Box Ink Stock/lubed/Filmed - 3:46
Sponsored Spot - 4:53
Comparison Study - 5:56
Sound Test - Box Ink Vs. Others - 6:03
Wobble Test - 6:43
Comparison Chart - 8:50
Thoughts - 11:42
Northfacing Test - 12:40
Full Typing Test - Box Ink Black - 13:13
FlexiSpot Kana Pro Bamboo Standing Desk: bit.ly/3w3WB7X
Get $15 OFF when buy through my link: bit.ly/3CCVazS
Now for every bamboo desktop you're going to purchase, FlexiSpot will plant a TREE!
Links to Products Shown in this Video
Gateron Box Ink Blacks (and Pinks)
Use Code "KEYBORED5" to get 5% off your purchase!
Gateron Ink Black V2
bit.ly/2VlVcvw
Use Code "KEYBORED" to get 5% off your purchase!
Gateron Cap V2 Yellow
bit.ly/3GcuyI8
Use Code "KEYBORED" to get 5% off your purchase!
Gateron PRO KS-9 Yellow
bit.ly/3pVuzKJ
Use Code "KEYBORED" to get 5% off your purchase!
ePBT Pink on Black Keycaps
bit.ly/3GAhxrX
Use Code "KEYBORED" to get 5% off your purchase!
Gateron KS3 Yellow
ringerkeys.com/products/gater...
Portico Keyboard
thekey.company/products/porti...
KBDFANS - Various Keyboard kits and parts
kbdfans.com/r?id=gj29u8
Shot on Sony A7 III + Sony FE35mm F1.8 and Shure MV7 Dynamic Mic
Sony A7 III
amzn.to/3cGUjma
Sony FE35mm F1.8
amzn.to/3bPHpTu
Shure MV7
amzn.to/2TXIpOO
A Quick Disclaimer - Some links I have provided are affiliate links that generate a small commission to support this channel. It helps me buy more stuff to create content if you shop through those links at no cost to you! Thanks for the support! :)

Пікірлер: 486

@Keybored 2 жыл бұрын

Looks like there was a vendor wide price increase on these since I have released the video! The Box Ink switches went up in price to $.85 a switch :(

@aghostofthepast 2 жыл бұрын

Influence go brrrr

@tekneiq 2 жыл бұрын

@SubwayLover 2 жыл бұрын

in Sweden they are 10 crowns a switch or about $1.06 goddamn

@onion_____ 2 жыл бұрын

Wtf

@oOWaschBaerOo 2 жыл бұрын

well, you can just buy akko jelly blacks, they are almost the same for significantly lower price, and smoother stock feeling 👍

@joshburger2217 2 жыл бұрын

I literally just finished my ink V2 build..

@Keybored 2 жыл бұрын

:) Ink V2s are still fine switches

@dingooooooooo 2 жыл бұрын

Damn dude feels bad…

@S3verance 2 жыл бұрын

Same, as long as you lube them properly, they sound really good, not worth upgrading to box inks

@steampiano 2 жыл бұрын

Extremely informative video, grabbed these for my build and loved its subtle but signature Ink v2 sound without the crummy springs. Travel distance reduction was easy to get used to and is totally worth the buttery smoothness and thock.

@TheAllRounderMemes 2 жыл бұрын

of course this comes out a month after i make my first keyboard build with black inks

@JustPaulFishin 2 жыл бұрын

Literally same

@Keybored 2 жыл бұрын

The joys of the mechanical keyboarding hobby! I think this is how they make us keep making more and more keyboards haha

@peachypers 2 жыл бұрын

i feel your pain, I really do

@N1lav 2 жыл бұрын

Boba U4L launching in a few weeks. More regrets.

@3shotta5 2 жыл бұрын

Same

@lastshoelace 2 жыл бұрын

Great video, I really like the key mashing/cutting between switches. Best way to compare the sound I’ve seen so far

@Keybored 2 жыл бұрын

:) Thank you so much! I hope these reviews and charts are helpful!

@JackedHero 2 жыл бұрын

Yes! So glad others are reviewing these switches. They’re so good!

@Keybored 2 жыл бұрын

:) They are right?

@justanotherpxrson 2 жыл бұрын

what a fantastic video as always. you always put so much work into your content and i really appreciate it. now i know you said its time to look past black ink v2s, but remember some people still wont look past vintage cherry blacks even though they arent that great anymore... lol

@Keybored 2 жыл бұрын

:) Yeah, you definitely have a point there. I'm not trying to discount the Ink V2s in any way... it's my opinion, but when I go back to back from the Ink V2s and Box Inks... something about the V2s just seem outdate... like how the switch feels and what not vs the new one... but not everyone will agree... but that's ok!

@chunkymilk1288 2 жыл бұрын

Some people still can’t get over Ink V1s xd

@justanotherpxrson 2 жыл бұрын

@@chunkymilk1288 but i have heard that ink v1s are actually better except for the fact that they have a loose leaf

@tims 2 жыл бұрын

Great comparison! As a newcomer to the hobby, videos such as this are very helpful when going down the rabbit hole.

@Keybored 2 жыл бұрын

:) Welcome to the hobby! Don't go too deep into the rabbit hole! The exit is very hard to find

@iivindictiveii6601 2 жыл бұрын

That sound comparison editing was awesome thank you for doing that!

@Keybored 2 жыл бұрын

No problem!

@leem0401 2 жыл бұрын

Very informative as always. Thanks for the comparison chart!

@Keybored 2 жыл бұрын

You're definitely welcome!

@hermv9994 2 жыл бұрын

Yes finally a review on these switches. Been deciding to buy these switches. Thanks for the review

@Keybored 2 жыл бұрын

You're welcome! Hope it was helpful!

@grapechowder5445 2 жыл бұрын

Glad to see my guy growing!

@Keybored 2 жыл бұрын

Thank you Grapechowder! Good to see you around! It seems like forever since my first videos lol

@prophecy0731 2 жыл бұрын

Thanks for introducing me to the cap v2....sounds amazing

@hamajineo 2 жыл бұрын

poggers

@Keybored 2 жыл бұрын

Great seeing you here Hamaji! Hope the uni life is treating you well!

@milo302 2 жыл бұрын

poggers indeed

@giocosovelasco 2 жыл бұрын

poggers indeed indeed

@zerorequiem6016 2 жыл бұрын

poggers indeed indeed indeed

@pizzapotatisen 2 жыл бұрын

poggers indeed indeed indeed indeed

@thegreatsawyer 2 жыл бұрын

I have ink V2's on my first build. I'll definitely get these at some point for my Mode Eighty. Great Video!

@Keybored 2 жыл бұрын

:) Thank you! They are great switches!

@Dexter-nr5hb 2 жыл бұрын

I’ve been missing out. I should’ve subbed a long time ago! The content quality is great!

@Keybored 2 жыл бұрын

Thank you so much Dexter! I really appreciate the sub!

@oikauapa 2 жыл бұрын

Thanks for the great informative video, will definitely be ordering some to try them out!

@Keybored 2 жыл бұрын

:) Hope you like them! I really do!

@chrisdotdash5154 2 жыл бұрын

I might pick some up! Great to see some switches getting refreshed.

@Keybored 2 жыл бұрын

It really is good seeing new switches coming out to make improvements

@Soul94255 2 жыл бұрын

That space bar had the tiniest bit of rattle lol. Anyhow, I really really appreciated your breakdown on these AND the way you showed the sound test on the same key!

@Keybored 2 жыл бұрын

You're very welcome! I know... The portico doesn't get as much love and it's been just sitting in the box for some time. So the Stabs are probably in need of tuning :)

@Clackbait 2 жыл бұрын

Great stuff as usual buddy!

@Keybored 2 жыл бұрын

Thank you CLACKBAIT!

@TheChrisDecember Жыл бұрын

Thanks for your video and comprehensive analysis. Watching the graph, I am happy I got the Ink Black V2s. I don't mind the slight wobble - I don't notice it when typing or gaming. In fact, I am actually glad there is a slight wobble as it accommodates my fast typing, or when I am not in perfect typing position. It sounds deep. Yes, it is on the higher price range, needs to be lubed, and wish it were cheaper. But for now I would not replace it with other switches, except maybe RAMA Ducks as I hear good things about it. I only use PBT MT3 keycaps, so clearance is never an issue for me. I am building a keeb for my girl, and I would consider Milky Yellows.

@cr00kedlove 2 жыл бұрын

Blackpink! ☺️ another great video. Thanks Keybored!

@Keybored 2 жыл бұрын

:) Thank you! Blackpink!

@destxi9578 2 жыл бұрын

Amazing video Keybored! Every video is entertaining and so high qualty

@Keybored 2 жыл бұрын

Thank you so much DEST! I really appreciate the support!

@akitsuki1149 2 жыл бұрын

I thought for a sec, technoblade watches keyboard stuff

@Aaron_Lesse Жыл бұрын

I'm going to try out the Gateron Box Ink Black V2 switches because I want something stiffer for my thick custom keycaps, quiet for online meetings, and pre-lubed because I don't want to set up a lube station and spend the time doing it myself. Thanks for the video! UPDATE: how about 2 months after this comment I have been using my new Gateron Box Ink Black V2 switches for a while now and I love them! They are just thocky enough for me without being too loud. They're not completely silent and sometimes my mic picks them up during online calls, but it's still okay with me. And since I installed thicker (and heavier) keycaps, they still feel like red switches on stock caps with the weight of the actuation force so not too much downforce is required.

@bakeraus 2 жыл бұрын

Black Ink Update! Nice, one of my favorites

@Keybored 2 жыл бұрын

Definitely one of the best switches!

@kayashkel3862 2 жыл бұрын

Time for me to order some, thank you Scott!!

@Keybored 2 жыл бұрын

You're so welcome!

@LeJunny 2 жыл бұрын

60g is the sweet spot for me, I spring swapped my Tealios to 60g and they’re 👌🏽

@Keybored 2 жыл бұрын

I used to really like heavier springs, but I found my perfect weight is either 60g or 62g long springs!

@vali8194 2 жыл бұрын

@@Keybored Are you talking about the bottom out or the operating weight?

@unkimochi1494 2 жыл бұрын

Thanks for amazing content

@Keybored 2 жыл бұрын

You're absolutely welcome! Thank you for the support!

@inkf2846 2 жыл бұрын

Found this the day I ordered the Black Inks V2. GOD DANGIT. but the V2s are so much smoother than milky yellows.

@BlackCat88899 2 жыл бұрын

And more expensive, but that's irrelevant

@chy6796 2 жыл бұрын

@Keybored 2 жыл бұрын

Yup! The inks are definitely the more premium switch!

@FranktheTank319 2 жыл бұрын

I just got the gateron mochi switches, which are a recolor of the ks-3 switches. They sound so nice lubed and filmed. I love their sound profile.

@Keybored 2 жыл бұрын

Gateron has really been stepping up their game!

@eysgaming853 2 жыл бұрын

Nice review. Btw if can please review the gateron crystal switch. I heard they are very good close to black inks too. Thanks

@Keybored 2 жыл бұрын

I heard some good things about them. Will look into them in the future! I have some Gateron CJs on order also!

@JadeZen520 2 жыл бұрын

That green on the Portico is truly mesmerizing

@Keybored 2 жыл бұрын

It is like sooo green. Like if you turned Yoshi from Mario into a keyboard green lol

@AlClisby 2 жыл бұрын

Excellent video! Would you mind telling me the title of the track that plays during the wobble test? Shazam and Soundhound were unable to identify it. Also really pleased to see these are good switches. Before I stumbled across your video I had ordered some Box Ink Blacks for my first ever keyboard build and now I'm even more excited to start, so thank you.

@orkid2766 2 жыл бұрын

Hello Scott! I’ve been using them stock for a while now and have been debating ordering films, is it super worth it or can I get away with a better sound by just lubing them? thanks!

@dico8199 2 жыл бұрын

Thumbnail looks really nice and these Switch comparisons are so nice

@Keybored 2 жыл бұрын

Thanks Ningo! I tried something a bit different for the thumbnails to have it stand out more. If this is effective, perhaps I can use this style going forward! The switches are great by the way!

@dico8199 2 жыл бұрын

@@Keybored I got not plans for my board after I oring sandwich mounted so I think I will go on and get a new board

@user-jb7vi5rw7e 2 жыл бұрын

@@dico8199 buy a pc bruh

@dico8199 2 жыл бұрын

@@user-jb7vi5rw7e oh what the

@dico8199 2 жыл бұрын

@@user-jb7vi5rw7e Im just gonna ask my parents after uhh I get the grades thing cus I always get good grades sjdsksksko

@godofchaoskhorne5043 Жыл бұрын

I was literally ranting on another video about Joe incredible box switches were and how hard it was to go back to regular switches..and then this video pops up. Box switches at least khail ones have zero wobble it's crazy

@leeshenn8075 2 жыл бұрын

great content! cant wait to order these from taobao for that sweet sweet price reduction

@Keybored 2 жыл бұрын

:) Hope they satisfy!

@SolaireFlair 2 жыл бұрын

Immediately ordered some of these to try them out, they look real good. Might be my new go-to switch if it's as good as you say.

@Keybored 2 жыл бұрын

They're like an improved Ink V2! The housing alone was a huge improvement! I think for my next set, I won't even film them... just add a tiny bit of lube to the upper housing and it actually made the switch sound even deeper

@KittySneeze 2 жыл бұрын

Same, plus I like the pink colorway. First time I’ll try matching the switches to keycaps (GMK pink on black)

@KittySneeze 2 жыл бұрын

@shirase I totally agree! I am however usually content with using switches that complement the board/keycaps, but this’ll be the first one that fully matches the whole setup. I also ordered the “alpaca” version of the Durock stabs stabilizers to round-out the matching build. Glad to hear you enjoy the process of coordinating all parts aesthetically, even those that aren’t visible, as it’s something I’m starting to appreciate more & more.

@NZ_Lexus_IS-F 2 жыл бұрын

Where the hell did you order them from?

@KittySneeze 2 жыл бұрын

@@NZ_Lexus_IS-F it’s in the description. The website is called Elboard.

@henrikjohn6590 2 жыл бұрын

great vid!!!!

@Keybored 2 жыл бұрын

Thank you!

@Stoic_Cat_ 2 жыл бұрын

Hey Keybored! How would this compare to the new updated black ink v2 (the short you posted haha) and would you still get this over the updated black ink v2?

@JMSP0511 2 жыл бұрын

Great video! Lots of great information here. One important thing I want to add, is the reduced actuation point. You mention total travel being reduced 0.6mm, from 4.0mm vs 3.4mm (Regular Ink vs Box Ink) However, the actuation has reduced 0.8mm, from 2.0mm vs 1.2mm (Regular Ink vs Box Ink) To me, the reduced actuation was very noticeable and felt very weird during regular typing.

@Keybored 2 жыл бұрын

Great point!

@iammstrlee 2 жыл бұрын

I don't particularly like long pole stems, it messes with my muscle memory and this release is no exception. I do credit Gateron with doing something different with the Ink line, but the amount of reduction here is significant. I'd be all for the pink's spring and housing for the normal Ink V2.

@itscasualdave7922 2 жыл бұрын

With my old Inks, I threw in some pom long poles (from carrots). The teal and black is so cool looking! I'm Gunna throw them on my Thera plateless build. Definitely breathed some new life in an old favorite. Can't wait :). Awesome job as always bro! Best part is showing off the weight capabilities of the desk haha.

@Keybored 2 жыл бұрын

Thank you so much! That does seem like a interesting color combination! I wonder how they feel!

@shaq9926 2 жыл бұрын

I LOVE YOUR VIDEOS

@Keybored 2 жыл бұрын

Thank you big man Shaq!

@shaq9926 2 жыл бұрын

@@Keybored Thank you, I know your name is keybored but you make me happy so I’m not bored

@TurcoKeremit 2 жыл бұрын

comparison chart is awesome!

@Keybored 2 жыл бұрын

Thank you! More to come on switch reviews!

@sonofpears7751 2 жыл бұрын

wow this really sounds like my dream keyboard. By the way are there any mods that you did on the Portico?

@unzkipriime4283 2 жыл бұрын

amazing video

@Keybored 2 жыл бұрын

Thank you so much!

@SuperKMao 2 жыл бұрын

So what I'm seeing and hearing is that the Cap V2 Yellows are the best bang for your buck

@Keybored 2 жыл бұрын

They sure are great bang for the buck!

@Jesuslovesyou-my8kx 2 жыл бұрын

just got some box ink pinks, i love them, lubed and filmed are thocc

@Keybored 2 жыл бұрын

They're great switches! I really like the look of them too!

@Jesuslovesyou-my8kx 2 жыл бұрын

@@Keybored yeah they look great and even better if u give them a kbd67 lite

@nathanielsimmons3933 2 ай бұрын

Would you recommend the box ink for a thocky/creamy build and are films necessary for the switches. Thanks!

@Tokolist 2 жыл бұрын

oh no, cap v2, coffe chip with long springs and now I must buy these, I basically order all switches you review :)

@Keybored 2 жыл бұрын

:) Thank you! Hope the content is helpful!

@Tokolist 2 жыл бұрын

@@Keybored you bet! thank you, I'm sure you spending hours and days on these extremely informative videos. really appreciate this!

@Greenskiii 2 жыл бұрын

Just finished my first build with these gat blacks. Tofu 60 with red samurais and a poly plate. I definitely should have spring swapped cause damn this thing is heavy. Especially since I came from cherry browns lol. And I also definitely over lubed. Beginner s mistake. Gonna have to pull em all out and de lube them ugh… it sounds amazing though !

@Keybored 2 жыл бұрын

Glad to hear that! The TOFU60 is still a great board! You should try doing the O-Ring mod on it. Check out my video on the wireless tofu 60, and I show some good mods on that board to make it sound amazing!

@PRATIK1900 Жыл бұрын

@@Keybored can you please make a video about how to make the Akko mod 008 the thocciest it can be? Thanks :D

@tf2hion 2 жыл бұрын

@ 3:57 the label says "box pinked lubed (also top housing slider)". Does that mean you lubed the top housing of the switch? Or did you lube the outside of the slider that creates that box shape enclosing the stem? (or did u lube both)? Also, extremely well made video!

@Keybored 2 жыл бұрын

Hi Hion! I lubed the little slider area on the upper housing where the stem would go into. It really helped to make the overall sound deeper!

@timothyjeremiahtaal1665 Жыл бұрын

Hi! Just want to ask which is more thockier, the box ink v2 or the oil king? thanks!

@sshum00 2 жыл бұрын

Oooh you vile evil man. I love you. Just got myself both of them. Aggggh I had not intended on spending money tonight.

@Keybored 2 жыл бұрын

:) Sorry! I know, there is always something new that comes out and I keep dumping money into it also!

@whnkeys 2 жыл бұрын

Keybored never leaves us bored for real, I never thought someone could make a switch review this interesting lol

@Keybored 2 жыл бұрын

:) Thank you so much! I really appreciate it!

@destxi9578 2 жыл бұрын

For real

@aidostuff9150 2 жыл бұрын

true

@Maitreya3001 2 жыл бұрын

Truth fullstop

@vergodagoat 2 жыл бұрын

Ooof was right about to buy them too. Lucky me.

@Keybored 2 жыл бұрын

:) They're great switches! You'll like them!

@prodcyc912 2 жыл бұрын

Two questions, do you think the black/pink tinted switch would interfere with rgb, and do these work with standard cherry mx profile caps to do you need specific key caps?

@Keybored 2 жыл бұрын

They do have the cut-outs so it should help somewhat, but as experienced with other tinted switches, the color does add a tint usually!

@user-kz9rz8ui1c 2 жыл бұрын

I see you picked up some of the gateron pros, will you be doing a full review on them?

@Keybored 2 жыл бұрын

I wasn't planning to, but perhaps if I do end up doing a Gateron CJ review, I can throw that in as a part! I can tell you tho... the pro switches are fantastic! And they will be featured in a next build with the TM680

@ojgimpson Жыл бұрын

ink black v2 still good, these are good as well. try both people!!

@Dajan456 Жыл бұрын

as a total beginner i have to thank you for putting out good content where you actually compare parts against each other as best as you can in video format. Because especially when you are new and try to figure out something you like its not that usefull when other creators just showcase stuff and say „yeah its good, much thocky“ every time. this keyboard stuff costs so much that you cant really order and try out a buch of different things, even if you work full time and are well off.

@yuyenbruh 2 жыл бұрын

honestly liked on the video just because of the ad :)

@Keybored 2 жыл бұрын

:) I did get a chance to lay on the table and have it push me up. It was pretty entertaining lol

@bugcapoo9310 2 жыл бұрын

Great video, just wanted to ask if you have some akko radiant reds around that you could have an interference test on. Pretty sure they can remove interference on cherry profile keycaps in north facing leds with their 3.5mm travel but I want to be sure since I really want to buy cherry profile keycaps and don't want to waste money just to have them have interference

@ishpatel3821 2 жыл бұрын

Let me know if you get an answer please

@Keybored 2 жыл бұрын

I actually don't have the radiant reds, but I have the Akko starfish, which should be similar. They do not have interference with the cherry profile caps

@ishpatel3821 2 жыл бұрын

@@Keybored thank you

@Shivartin Жыл бұрын

Please, do a review on Haimu Heartbeat Silent Linear Switch. It is silent, but it does not have rubber pads but an entirely new mechanism. I bought some and they are pretty smooth stock and quite silent. I know you are a ruckus guy, however, this is really a new development in switch design.

@Xzor 2 жыл бұрын

"Pink Blacks"... So Watermelon? Great looking board and switch review!

@Keybored 2 жыл бұрын

:) Thank you! I'm planning to buy more of the pink ones and spring swap them out to a slightly heavier... I really like how the pink ones actually look

@corporealghoul 2 жыл бұрын

My main question is with the slightly longer stem pole will they prevent interference with north facing leds and cherry profile caps.

@Keybored 2 жыл бұрын

Yup! I show the demonstration of this in the end! You can use north facing with cherry profile. If you're asking if putting an actual LED into the hole, not so sure about that since I haven't had any boards that require a full LED that way

@PivBlast 10 ай бұрын

with the switch comparison chart its hard for a beginner like me to remember which switch is which by image. my stupid ass needs a key legend or something

@MichaelBertolino 2 жыл бұрын

Fantastic review! How would you compare the Box Ink Blacks to Lavenders and Epsilons? I'm looking for the deepest sounding and smoothest switch

@Keybored 2 жыл бұрын

I haven't had a chance to check out Epsilons, but I assume they will be closer to the Mint switch I tested earlier. The Mint is actually very deep and subdued, slightly more than even the inks. However, compared to the lavenders, the inks are deeper

@MichaelBertolino 2 жыл бұрын

@@Keybored Very interesting. I'm not sure why nobody is talking about the Mint switches!

@mikemiller7788 Жыл бұрын

Are these heavy switches or would they be good for typing on all day?

@abmeight08 2 жыл бұрын

Gateron Pro Yellow is such a good value.

@Keybored 2 жыл бұрын

An amazing value actually

@substratum3d 2 жыл бұрын

Annnnnd I'm just now finding this video as my Black ink v2"s shipped out yesterday

@Keybored 2 жыл бұрын

:) The joys of this hobby!

@BrakkoJanus 2 жыл бұрын

I would love to see what you think of the Akko Jelly switches, which seem to be an affordable and convenient offering!

@Keybored 2 жыл бұрын

They're great switches, especially for that price! Very smooth as well. However, the sound is not the same as the ink series. It's actually much more clacky

@BrakkoJanus 2 жыл бұрын

@@Keybored interesting, so you would prefer Gateron Ink?

@yano9669 2 жыл бұрын

nice video. How would you compare these new box switches to the mint linears? Thanks

@Keybored 2 жыл бұрын

I would say that the mints are still more subdued and deep... they sound "heavy." Also the mints are super smooth due to their UHMWPE stem. The drawback to the mints is that the stem wobble is pretty bad.

@RR-ss1tj 2 жыл бұрын

I was about to buy the old inks because I didn’t know about these new box inks. After seeing and listening, I actually want the phantom red and yellow cap v2. 🤦‍♂️ also they are cheaper so it’s a win win. #winning 😆

@Keybored 2 жыл бұрын

:) Phantom reds and the pro yellows are the same molds, so you might want to grab the pro yellows since they're cheaper!

@RR-ss1tj 2 жыл бұрын

@@Keybored nice, that makes it match better. i was going to do the yellow cap v2 in the alphas, and fill in the rest with phantom reds. since you said the pro yellow is the same, im going to go with that instead and it will be all yellow. ty, u are a legend.

@tsunderechild2777 2 жыл бұрын

Are the housings the same as the v2s and do they fit regular stems?

@shaun998 2 жыл бұрын

The little Hachiroku model

@Keybored 2 жыл бұрын

:) Yup, it completed the desk!

@godofchaoskhorne5043 10 ай бұрын

If it didn't involve lubing switches I'd buy new switches for my second board. But as it is.. I'm just keeping my main with the black V2 and secondary with the gat yellows. I fkn HATE lubing and I'm almost outta lube and buying new krytox is very hard where I live

@TMDangerMouse 2 жыл бұрын

Hi, Thanks for the video 😎 I'm looking at getting some of these to go into a GMMK Pro, but I'm used to heavier switches, my last set was the Kailh Box Navy Crystals which have a 90g bottom out apparently, would these feel too light? Can you spring swap these as I'm struggling to find the same length spring (20mm) in a heavier weight? Any advice or suggestions greatly appreciated, thanks 🙂

@Keybored 2 жыл бұрын

Check out some TX springs! One my favorites!

@hellozero5321 2 жыл бұрын

I am new to the hobby. Just got an akko mod003 because of your previous video and still looking for options for switches. This helps a lot and gives me a lot to consider for switches. Great videos as always! Also, How do these compare the akko jelly and starfish?

@Keybored 2 жыл бұрын

:) Thank you! These are smoother and deeper sounding than the Akko switches!

@Samael2004 9 ай бұрын

Don't know if this is too old to ask but where would you but the oil kings for the chart

@chrishahn2937 Жыл бұрын

So is there a 2nd version of the ink black V2s??

@samdeur 2 жыл бұрын

3 times more expensive hope they’re worth it. For me the gateron milky reds are good enough I don’t even notice wobble I have switch films but I never felt the need to use them. Strange.. Lets hope the price comes down a bit more

@Keybored 2 жыл бұрын

Hope components become more accessible!

@reubencobb6465 2 жыл бұрын

If i had money I would defiantly buy these

@Keybored 2 жыл бұрын

Yeah, these are definitely more costly

@ToysForTheGods 2 жыл бұрын

Pro yellows will still remain king of the budget switch. I still don't have any of the AKKO switches to compare them to personally. But I plan on it in the near future.

@skrimontgv2217 2 жыл бұрын

Akko switches are smooth but I guess are too light for my liking so i’d still go for heavier gateron switches such as the milky top yellow and black and the inks

@Keybored 2 жыл бұрын

Pro yellows are fantastic! I am featuring them on the newest video this week!

@nihalprakash8883 2 жыл бұрын

5:47 mrw the board I waited to get for a year and set an alarm for is sold out in 3 seconds

@Keybored 2 жыл бұрын

:( some stuff really do go so quick! Like the jelly epoch lol

@ANg-yz1zl 2 жыл бұрын

Sound and feel great except it hurt the wallet when upgraded. If you are really on the cheap side just stick with a stock switch that came with your keyboard. Most switches even the expensive require lube manually so lube your stock keyboard switch. Next, tape mod for wobble key, add pad, and tape the back of the keyboard PCB for a little more thocky sound. This should get you to about 80% performance /feel/sound of a super high-end custom keyboard for 1/5 to 1/10 the prices.

@matasa7463 2 жыл бұрын

Indeed, I got the Aqua King V3, and though they are definitely better than my old Gateron Yellows, especially when stock, after lubing and filming, they are surprisingly similar. I can definitely say that the Aqua Kings are better, but the Gateron Yellow, when lubed and filmed, are about about 80-90% there.

@Keybored 2 жыл бұрын

All switches do turn out much nicer when lubed and filmed! Hence gat yellows are one of the best switches out there for the money! Especially the new pro yellows... these are fantastic!

@LUFS 2 жыл бұрын

HelpfulI review to me, thanks. I got the pink box inks today to build a purple kbd67 lite v3 in ISO 😱🙃 / pc plate / tape mod. Can‘t wait to hear the sound. The plan is to use the kbd67 / box pink combo as a pretty fast gaming board. I guess I‘ll let them break in for some time and after that lube them slightly with 205g0 and film with thin durock film. Any other suggestions or experiences are welcome. 🙏 keep going everyone.

@Keybored 2 жыл бұрын

Great combination! I love the pink box switches... they look so nice and different from all the other ink black builds :)

@LUFS 2 жыл бұрын

@@Keybored:-) It worked out great - even without foil or pads on the PCB the sound is beyond my imagination. This is while the switches are stock and still using the KBD stabs instead of Durock. I did a holee mod, Krytox XTH-BDZ for the wire and some 205g0 shine for the housing. I guess there is still some potential for (future) tuning and experimentation. At least a gaming board I can highly recommend this combination. Fast, deep sounding to my ears. If someone definitely doesn’t want to lube switches the pink box inks a worth a consideration, thats not the case for black inks v2. For this price point the combination is a premium experience. At least if the ABS case is not a problem. I got the purple case combined with a combination of white and pink PBT shine through Caps (Cherry profile). Love it as my new gaming board. Keep up the good work. ✌️ from Europe.

@DeividasGedgaudas 2 жыл бұрын

The moment I splrudge and order a Tofu60 with Black Ink V2s you post this video ...

@ee1yd 2 жыл бұрын

every time lol

@Keybored 2 жыл бұрын

:) The joys of this hobby! But the ink v2s are still great switches so no problems there!

@hypeboy5946 2 жыл бұрын

have you tried comparing it with the akko jelly black? They look pretty similar..

@Keybored 2 жыл бұрын

They look very similar, but the Box Ink Blacks are much deeper :)

@Ponker 2 жыл бұрын

Hmm...I dunno from what I saw right now, they're a bit more pricy. I think I'll stick w V2s for now, they're not that bad still. Great review, Ponker Bless.

@Keybored 2 жыл бұрын

Interesting! The sites I use, I see them at the same price as the original V2s! But hey, the V2s are still great so all good!

@MrShah434 2 жыл бұрын

@@Keybored which websites are you using? I can only find the black box inks for 0.85$/pc compared to 0.70-0.75$/pc for the black ink v2

@jannclaudebinoya 2 жыл бұрын

Can you do a tutorial on how to properly lube these?

@Keybored 2 жыл бұрын

I lubed them the same way as other linears! :) But I think for my next batch, I'll skip the film and lightly lube the upper housing slider :) Made the switch sound deeper

@mikhail6289 2 жыл бұрын

Good video! What difference beetween Cap and Cap milky housing?

@Keybored 2 жыл бұрын

I think the Cap V2 golden ones are a tad bit smoother and deeper in sound than the milky. But honestly, the milky is a great great value for a fraction of the price!

@rawrj 2 жыл бұрын

Is it possible to get that plate for the portico anywhere? The only other aftermarket one I've seen thus far is a POM plate that I've been considering.

@Keybored 2 жыл бұрын

I actually received it from a viewer lol. Email me and perhaps I can help you with that

@SUZ0Y 2 жыл бұрын

i dont have time and the budget to lube them can i use them stock to my modded keychron q1?

@TheYeahh 2 жыл бұрын

I've had a bit of a problem with the long poles/sliders on these making my keycaps seesaw on my stabs any advice?

@Keybored 2 жыл бұрын

Yup! I have a video out on helpful hints and tips! Check it out! It shows you what to do with long pole switches and stabilizer keycaps!

@basic867 2 жыл бұрын

Thanks for the video. Between black and pink, do you notice any other differences except the spring and color?

@Keybored 2 жыл бұрын

Just the spring and color!

@basic867 2 жыл бұрын

@@Keybored Thanks!

@clacksandpop7390 2 жыл бұрын

Akko had a "clone" version it's their jelly series, would you mind reviewing them?

@Keybored 2 жыл бұрын

I do have the Jelly switches with me right now. They're good budget switches for sure. I wouldn't actually put them on the same level as the box ink blacks. Back to back, they actually sound really really different!

@RubyRoks 2 жыл бұрын

Here's hoping Gateron brings out silenced versions of these switches.

@Keybored 2 жыл бұрын

One day! I've never been a huge user of silents, but recently I made a board with some for travel... and it's oddly growing on me. The soft squishy bottom out I kind of like haha