thanks, the videos are make for the product page on Amazon, I just move them over to this channel as well. But no change to say, hit the like and subscribe button lol. :-)

@@ItstheDaveShow1 🤦‍♀️ LOL👍

that is great! I am glad I could help you

thank you! yes it can be installed on a door the other way as well.

​@@ItstheDaveShow1 Awesome! Thanks, Dave!

awesome! thanks for watching, glad it can help. pretty easy to do!

Picked and installed in LESS THAN two hours!! I am going to include your link in my Amazon review!!

@@pward8723 awesome!

I believe those are adapters if the hole is too big for it.

you might want to flip the switch on the inside to the other way, I have had to do that before as well

@@ItstheDaveShow1 Thank you for the tip. I cannot turn the switch to the right lock position. It's a hard stop and won't allow me to. The inner switch works freely and fine when I turn it to the left. I am using the left lock switch position (as I believe it should be). I have removed the inner housing and when I use the keypad, it appears to attempt to switch, moves slightly to the unlock position then stops. It's like something is keeping the motor from turning it all the way. It does this twice. I am starting to think it might be defective.

@@LeeE-fx5if yikes, could be something wrong with it, hard for me to know of course. if you took it apart and tried switching to the other way and it still doesn't work might want to contact the manufacturing for that one. sorry

@@ItstheDaveShow1 I appreciate your assistance:) I contacted Teeho customer support. Did a few simple diagnostics and they are sending me a replacement. I must say that they provided the best tech support and assistance of all the other companies I have dealt with in the past, hands down.

@@LeeE-fx5if that is great news!

play the video backwards. real easy to figure out

yikes, I have installed a few of this brands locks and all still work ok so far.

@@ItstheDaveShow1 at least yours work, we fix the problem by taking the batteries off and use the key like the old way lol but it works like a lock now xD

that is great, hope you used the link in the description :-)

oh no sorry to hear this, I am not quite sure what you mean or how that would happen. there should be a way to put it back together. Don't think I could help you much with this one as I am not there to look at it and try. Sorry

that sounds odd, not sure

maybe just check the hole it comes out of to be sure it is clear and the hole it goes into, make sure it is lined up and clear

not sure really, would depend on how often you use it I suppose. That one lock in on my back door and we just use the manual part on the inside to get in and out. So it would vary. Good to use quality batteries.

you should contact the manufacture

not sure as I am not there to know, maybe check with the manual to see if you have it set correctly for auto lock.

yikes

you just need to hold down that one button to lock it from the keypad, I think it was the # button, I show it in the video.

I am sure about that one sorry

I don't know sorry

there is a reset button on the inside part of the lock where the batteries are, I would contact the manufacture for a copy of the instructions for resetting the numbers again.

the keys would be all different, just like any other lock you would buy.

I go over it at 6:56, but it is easy and says in the manual of course too.