The video doesn’t SHOW THE MIST IMPORTANT PART. What is the correct position for the cam inside the key lock mechanism? How is it clocked? Can’t get mine to lock when stowed away.

Thanks, saved me $90 labour charge, only had to pay $10 for the case.

This was the best video among several that I looked at. The only problem was that the nubs on the button that make everything line up for the key, did not line up in order to just use the old key with all of the other new parts of the new case. I used a Dremel tool to file down the inside slots on the case to finally get things working, to use the old key & button in the new case. The case was advertised to fit my model year, but it wasn't a 100% match.

Made it look to easy wow

I dont believe he is replacing and cutting open an original key fob ..The original is really well glued and you will most likely break your original key by doing this..

The only person to open key without breaking it.

Nope no good. Ive still got no fucking idea how the little metal button fits into the blade. every time i do this and close it, the button doesnt stick out, and the blade wont click back into place.

Thank you so much for this video. This was the best ever. You made the process so understandable. I couldn't understand why others wanted to pop the pin out of the blade instead of just swapping it out. Thanks especially for the razor blade tip. Before watching your video, I was going to skip the frustration and just pay for it be done at the dealership. But because of your video I know I can "do-it-myself!"

Mine was glued shut... no way to get it open without breaking it. Had to order one with the electronics.

You missed a vital step!! The pin, spring and key needs to be shown how t put together. 😔

Thanks mate, just bought a new VF key shell online and did the change over watching your vid. Just went down and tested it on the car and it worked perfectly.

Every-video disassembling the fob people struggled and make it intimidating . You made it look easy‼️thank you.

Thank you so much for taking the time to film this video. Of all the videos I viewed, your video was the most helpful😁Now I can get back to getting my life all the way together.

This was very helpful, thanks for showing us how to do this, your awesome IM Group!

Just did this to 2 remotes for a 2014-15 (not sure which year exactly) Chevy Sonic, that glue on the factory remote made this 10 times the job it needed to be, I cut along the sides like shown in this video and even cut along the bottom (down where the fake chrome key ring ting is) and I got the bottom to pry apart but it still snapped halfway up the battery cutout, I tried prying inside the hole the key head spins in like this video showed but couldn't get anything to budge there, what I ended up doing after the bottom half of the back broke off was I took some very small flat head screw drivers and I slipped them in the groves where the 2 pieces of shell are glued together and used a hammer to carefully drive them toward the top of the shell and was eventually able to break enough of the glue bonds to get the circuit board to fall out.

This is the best camaro key fob video ever, follow it close and you’ll have a great idea on how to do it yourself. Thank you 🙏. I was able replace mine. I had to break the original one. Once you crack it open it’s easy to put it back together. Watch the video

This video helped me a lot, thank you❤️

Absolutely beautiful

Pay attention to the size of the button in your original and replacement keys

You are a genius 👏 🙌