Kicker KEY200.4 - Compact Smart 4-Channel Amplifier

No video

Kicker KEY200.4 - Compact Smart 4-Channel Amplifier

Рет қаралды 58,803

Күн бұрын

Kicker KEY200.4
Purchase from Amazon (Paid Link): amzn.to/3l96pYJ
www.qualitymob...
Amplifier Installation Kits
www.qualitymob...
Visit www.QualityMobileVideo.com for all of your car audio and video needs!
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook: / qualitymobilevideocom-...

Пікірлер: 76

@KICKER-AUDIO 3 жыл бұрын

There are a few KEY videos out there. Gotta say this one among the best!

@Qualitymobilevideo 3 жыл бұрын

Thanks KICKER!

@wal 3 жыл бұрын

Always good to see an amp do rated power, great job covering the details as these little amps pack a lot! Also, you forgot to tell people to click dislike twice if they don't like the vid, that really makes a difference, lol.

@Qualitymobilevideo 3 жыл бұрын

BAHAHAHA Thanks for the suggestion bud 🤣🤣🤣

@HifiVega 3 жыл бұрын

Thanks fella’s! I didn’t Dyno my key 200.4 and people been asking me nonstop so now I can just share your video with them without having to pull my amp outta the car lol. 😎

@oherrera1987 3 жыл бұрын

Did you go aftermarket with your speakers or did you keep it stock

@HifiVega 3 жыл бұрын

@@oherrera1987 aftermarket kzfaq.info/get/bejne/ha2Cq6aImd-odYk.html

@bryanCLXT 3 жыл бұрын

U know if I see ya name.imma say sum lol. Very smart man work smarter not harder

@HifiVega 3 жыл бұрын

@@bryanCLXT dats right!

@Qualitymobilevideo 3 жыл бұрын

Awesome thank you!

@Airmaxx02 Күн бұрын

Just got this for my 2021 VW Atlas CS 💪🏽

@bmuenter 3 жыл бұрын

I sell a fair amount of these amps. They do very well for the price! It's a good way to get my customers into DSP for fairly cheap. And with the button on the mic, you can toggle it on/off to see what it did. Works great just about every time! I like them. It's more focused on sound quality then a lot of output...and it definitely delivers! Only kicker product would ever I sell, until they make a 5 channel version hahahahaha

@Qualitymobilevideo 3 жыл бұрын

Thanks for sharing!

@25hztolife86 3 жыл бұрын

Perfect to run a nice set of components.

@Qualitymobilevideo 3 жыл бұрын

It sure is!

@Alfa_bert0 Ай бұрын

NEED HELP I’m running this amp and when I put the music up too loud and for too long the audio cuts out completely and the red PRT light comes on but yet my subwoofer connected to a different amp are still on and bumping? Doesn’t make sense.

@MadClowdz 3 жыл бұрын

Considering this amp to power my KS 6.5" speakers while maintaining minimal space requirements.

@bryanCLXT 3 жыл бұрын

Kicker is solid as always

@Qualitymobilevideo 3 жыл бұрын

100

@yankodimitrov5246 5 ай бұрын

How that does measure powerwise to an aftermarket headunit. Considering most are rated at 4x50.

@JasonWW2000 2 ай бұрын

In reality, most head units only output about 15 watts of clean power. This is a big step up in power.

@yankodimitrov5246 2 ай бұрын

@@JasonWW2000Thanks. That makes sense.

@boominS10 3 жыл бұрын

The key amps are awsome

@jonathancervantes2260 Жыл бұрын

Can you connet this amp with infinty kappa speakers ?

@Qualitymobilevideo Жыл бұрын

Sure you can.

@nicolausgephardt1466 9 ай бұрын

I have a 2009 Rogue with a factory Bose system which has its own factory amplifier. Can I use the kicker key 200.4 without adding a summing device? Thanks so much for your videos and explanations

@Qualitymobilevideo 8 ай бұрын

Unfortunately not, you will need a summing device.

@ellietemple433 3 жыл бұрын

I have a 2013 regular cab tacoma with two 6.5" inch woofers, and two tweeters. Will this amp work with my system?

@AzraelIgnis 2 жыл бұрын

I bought a 2 way memphis component set. I want to go active, do i need to add a bass blocker to the tweeter or will the amp know the difference during its dsp tunning? I like the fact you can bi-amp this but it has been awhile since I've installed car audio equipment.

@abelscaliber7969 Жыл бұрын

The amp Will detect what’s connected

@krankertigaz 8 ай бұрын

So frustrated right now, I finished the bi amp key setup, all fine, happy tone, the music was playing nicely, moved to gain matching and fried both tweeters with the 50hz test tone, no limiter red light was shown or anything. I'm still trying to understand why the amp was sending such low frequencies to the tweeter. What could have happened, fader was OFF, Bi amp on, kicker EQ off, compression OFF, using just front channels, woofers connected to hear outputs, tweeter to front outputs. Didn't the Key setup separate the frequencies properly? why the tweeter got burned while woofer was not even close to limit and red light didn't come up?

@Qualitymobilevideo 8 ай бұрын

You should always have at least a cap on the tweeter to prevent damage when errors are made. Unfortunately you learned the hard way.

@krankertigaz 8 ай бұрын

@@Qualitymobilevideoyes, it cuts too low at 3.2k. At least it was the OEM and not really the twitter from the 2 way kit I was waiting. For the two way I used the passive crossover that came with it just for the tweeter.

@qTravis666 2 ай бұрын

You still need a crossover for the tweeters.

@qTravis666 2 ай бұрын

@@krankertigaz the passive cross over is meant for the door speakers so that they dont play subwoofer sounds. So unless you HATE bass and want to treat your door speakers like tweeters you will need an actual real crossover in order to

@krankertigaz 2 ай бұрын

@@qTravis666 that’s an active system, I don’t need a passive crossover, what happened is that the kicker key separates the frequency around 3khz and my tweeter recommendation is 5khz+. I should have used the passive crossover only for the tweeter, but even that I would loose frequency range from 3-5khz… anyway I returned it as it was also not as strong as I wanted and went with a audio control 6ch DSP. Way stronger, I can run 4 channels active for the two way components and the other 2 bridge mode for the sub… the sound is amazing… the key is good if you just want a nice sound all around, but if you are an enthusiastic and want something with quality and power it doesn’t handle…

@dantegil7074 3 жыл бұрын

if a amp says 4 ohms: 250 watts x 2 channel and wires to one speaker @ 4ohms does that mean the speaker is getting 125 watts or the 250?

@dantegil7074 3 жыл бұрын

Or is it when it’s says 2 channels. Do I have to put 2 subwoofer to it?

@gillripper1 3 жыл бұрын

I plan on using this active w a set of Morel Tempo Ultra components and the 500.1 to a JL 10Tw3.

@Qualitymobilevideo 3 жыл бұрын

Nice setup!

@ricstars95 2 жыл бұрын

how did it go with tempo? i thought tempo ultra are hard to drive (100w rms, dips 3.1 ohm) i am considering maximo + key 200.4 if it could make maximo sing with good SQ

@victorzuil5469 3 жыл бұрын

if i buy a rms 2ohm 280 watt subwoofer with a amplifier 2 ohm 300 watt does that work?

@jameswood7500 3 жыл бұрын

@@IrieRedGnome gains are signal amplification not a power knob... just don't turn the volume above clipping.

@jameswood7500 3 жыл бұрын

@@IrieRedGnome you did offer false information to someone that did so maybe if you don't want to know the truth then stop trying to act like you know something 😉

@r9er 3 жыл бұрын

what does Bi Amp mode do if I'm only running 2 speakers?? will the amp put out more watts to each speaker or does it still put out "50" per channel???? like it is 50x4 but if I'm only running 2 do I get 100 to each or is that not how it works???

@JasonWW2000 2 ай бұрын

Biamp mode means it's looking for a high frequency driver and a low frequency driver and it will set active crossovers between the two and equalize them as a unit. Non biamp mode means it will look for full range speakers on all four channels. 2 channels will be the front and two channels will be the rear.

@douglaspayne5162 9 ай бұрын

So if this is added with an LOC will that affect the DSP auto-tunning ?

@Qualitymobilevideo 8 ай бұрын

No, and LOC will not affect the DSP if installed properly.

@JasonWW2000 2 ай бұрын

This unit has an loc built-in.

@elijah813 2 жыл бұрын

You said you can runa 3 way setup? How? I'm in bi-amp now but would love to know how to run a 3 way.

@JasonWW2000 2 ай бұрын

A 3-way setup would require at least a few passive crossovers. It would not be fully active three-way.

@________GHOST________ 3 жыл бұрын

This would be great for me but there is reports of bassheads are sending them back do to chip error so this is not a good buy here :/

@Qualitymobilevideo 3 жыл бұрын

What issue are they having? I presume its the monoblock version they are having issues with?

@MirroCosmoKenisis 3 жыл бұрын

How much ?? This is Phenomenal.

@Qualitymobilevideo 3 жыл бұрын

$224! www.qualitymobilevideo.com/47key200-4.html

@carrickdubya4765 Жыл бұрын

@@Qualitymobilevideo Not anymore, now it's $270

@stevenmathes2770 3 жыл бұрын

So this won’t work with my 2.5 Ohms speakers in my truck only 4 Ohms speakers?

@jameswood7500 3 жыл бұрын

I saw a kicker video and one of the developers said it would be fine and to go for it. I just wander how much power increase 2 ohm would give you.

@bennyblanco14 3 жыл бұрын

I'm confused one test said 53 watts rms and DD1 said 49 watts.... why are their 2 test results? Just curious...thanks

@Qualitymobilevideo 3 жыл бұрын

The 53 is the more accurate number, as the voltage is confirmed on the Liumy. The SMD is a very popular product but seems to always be a little off

@bennyblanco14 3 жыл бұрын

@@Qualitymobilevideo oh okay....

@Llegando_Tarde 3 жыл бұрын

Nice amp 👍🏼

@Qualitymobilevideo 3 жыл бұрын

Thanks! 👍

@NinerGang03 4 ай бұрын

Is it normal for this amp to get pretty hot?

@unclebrew9536 2 ай бұрын

Yes

@JasonWW2000 2 ай бұрын

It's extremely efficient so you would have to be really cranking on it at high volume for a long time to get it really hot.

@PedroLopez-hl1no 6 ай бұрын

Need a sample pls

@Qualitymobilevideo 6 ай бұрын

What sample are you looking for?

@McCarthyism_by_Youtube 3 ай бұрын

lol nice try, Pedro

@supertechsymphony 3 жыл бұрын

Link can't open

@Qualitymobilevideo 3 жыл бұрын

www.qualitymobilevideo.com/47key200-4.html?KZfaq&Video&Kicker_KEY200-4

@Tuff_love 3 жыл бұрын

It's $259 but you get alot

@Mondo_0ne 11 ай бұрын

Wow... you can read a brochure

@your_mamas_name 4 ай бұрын

Could i run a 3 way component infinity kappa (503cf + 303s) with the Kicker 47key200.4 either bi amp or 4 channel mode?

@JasonWW2000 2 ай бұрын

Yes, but you will need to use at least some passive crossovers.