Kickstart slipping

No video

Kickstart slipping

Рет қаралды 228,153

Mike Henwood

Күн бұрын

BSA Bushman D10A Kickstart Slipping

Пікірлер: 38

@vashx2295 3 жыл бұрын

I made the mistake of kicking off a slipping kickstart with my full body weight one never again

@Popcorx 10 ай бұрын

Ruined the whole engine 😭 ?

@jeevan_gopal 3 жыл бұрын

How Kickstarter really works make a video

@BNJITOKES Сағат бұрын

Spins your clutch which is attached to the crank which is attached to the piston so when you kick that down it spins a gear on the clutch which causes the engine to fire by spinning the crankshaft

@daddyfercho8915 2 жыл бұрын

How do you fix this

@willgamer0849 5 ай бұрын

I left my 4 stroke bike sitting without oil for a week, when I replaced it, left it sit in. Moved the bike just to check the level and something inside sounded like it snapped, then when I was going to hit the kickstart it wouldn't go down, it's stuck. I didn't do anything weird just moved it a little. I didn't even touch the kickstart until it was full of new oil. what could've be pls help!!! 😢

@LovelyBamboo-gl5vc 2 ай бұрын

Most likely ur engine has seized, because u made it sit without oil

@quewma123 2 ай бұрын

@@LovelyBamboo-gl5vc brudda he didn’t even ride the bike how the hell is it supposed to seize if the parts aren’t even moving

@sudarshan1354 2 ай бұрын

Bro same here. What happened next ? Did you fix it ? How ?

@-.__328 8 ай бұрын

Mines like stuck so i cant kock it down after a little bit of it going down

@willgamer0849 5 ай бұрын

Mine it's stuck and won't go down! I left my bike sitting without oil for a week, when I replaced it and was finally going to hit the kickstart something inside snapped and won't go down. what could it be? 😢😠

@Namedeeznuts 3 күн бұрын

Take that shit apart and hit up Daddy EBay and Mommy Amazon

@georgemixalakis3724 Жыл бұрын

Mine doesn't slip mine goes two clicks and it's done you have to push it 4 times for the piston to go up and down

@matthewmurphy2323 6 жыл бұрын

What was the problem?

@rebeccaslater2585 Жыл бұрын

How tofix this issue

@pogmothoin7133 7 ай бұрын

How would you fix that?

@ghostraiderRRR 4 жыл бұрын

Kya change kiya phir

@rebeccapalu9827 2 жыл бұрын

I have the same problem

@Jon._.8 2 ай бұрын

i literally just have that in a kx250 and i though i blow the engine

@tanuki4games 10 ай бұрын

You wore down the cog ridges.

@adambooth-bx2op Жыл бұрын

how do you fix that

@RainbowSheep_was_taken 9 ай бұрын

You can replace it for 20 bucks or something like that

@balsonnaoshekpam6240 10 ай бұрын

Thanks i know the problem

@matthewclark8475 Ай бұрын

What is it

@markparry5722 8 ай бұрын

Don't do that to the spline ya need to buy a proper D1 to D3 kickstart arm that looks like it's for a d10 or so! Ya need a gearbox cap bolt too!

@kirankota3396 7 ай бұрын

Clutch assemble problem

@mohitrocks55 6 жыл бұрын

Any solution to this problem??? Plz make a video about solution too...

@JosieLHenwood 6 жыл бұрын

Replaced the clutch drum and pinion, and problem solved. Slippage was occurring in the ratchet teeth between the kickstart pinion and the back of the clutch drum.

@raghunatchaudhari6134 4 жыл бұрын

Problem

@ghostraiderRRR 4 жыл бұрын

@@JosieLHenwood nice solution

@Bob-nickga 2 жыл бұрын

@@JosieLHenwood I'm having the same problem now. Can you send me a video of someone fixing it?

@daddyfercho8915 2 жыл бұрын

@@Bob-nickga me too it just keeps slipping