I know other people use it another way by draining the float bowls and it works. "I'm going to do it a different way and when my way doesnt work, I'll say that its not a good product" Brilliant!!!

The Seafoam can recommends 1 oz per 1 gallon of gas. I used this on my Honda Accord, and it cleaned my O2 sensor, removing the check engine light I had. Just mix it, and drive.

Personally, I just dump half a can of SeaFoam in a fresh tank of fuel every 3-6 months. Keeps things squeaky clean in there.

The I sniffed it part destroyed me I couldn't breathe

12 minute video about pouring Seafoam in a motorcycle and letting it do what it was designed to. Brilliant! I can't decide if I want to kick you for uploading this video or kick myself for actually watching this.

I just pissed in my tank and now I cruise my bike around the clouds like Elliot and ET

I tried this on my bike... But I used an auxiliary tank with half gas half seafoam. Let the bike run until it no longer needed the choke to idle... It seems to have worked really well for me.

Yes the seafoam is more of a preventative. If the bikes going to be sitting for any length of time you don't want fuel to oxidize leaving a residue, potentially damaging the gaskets. I would probably adjust the valves. Hang clean the carburetor and ream out the Jets. Replace any funky looking gaskets. New spark plug make sure you have adequate spark. The thing is kind of old so replace a few rubber hoses. And ride it like a girl. Pretty cool

Yea, that is kinda my feelings on it as well. For very slight hesitation Seafoam or Gumout carb cleaner (if you can still get the non fuel injected versions) may help but full on carb cleaning is the right way to do it.

If your bike isn’t starting after sitting this is a good idea to try to crank it with pure sea foam for me. Or in my case throw it in after buying a bike that cranks but doesn’t start

Rock on Motorcycle Man!

2:31 "Who TF you talkin to" lololol

My bike is prone to clogged carbs (‘95 Honda VF750CD Magna). I run non-ethanol premium fuel with a mix of Seafoam and preservative all the time. If I run the fuel out of the carbs before I put it away it will be fine, but I found the petcock leaks fuel through even when it’s closed. I’ve tried pure Seafoam soaks like this several times but it doesn’t work. I’ve ordered a new petcock and I’ll be pulling the carbs off again. Unfortunately it’s not a one-hour job on the Magna. Pretty-much an all day job.

Bought 98 Valkyrie. Sitting 2 yrs...starts uns great as long as you are spraying carb clean in airbox. Question:. Can I back flush carbs with seafoam? Ie.. remove fuel tank, empty, clean, set aside. Apply vacuum to petcock verify line open. Back fill each carb with seafoam until it comes out carb supply areas. Do all 6, let sit. Refuel and run. Do you think this type of fix will work on the Valkyrie in cleaning removing internal varnish and eliminate need for removing carbs?

i just pop off the pressure tube of the carb and run the bike off seafoam that way. it makes a massive plume of blue smoke but man i burns whatever is gunking it up

Nice 400 bro. I just scored a 69 cb350,runs like swiss watch.

Why drain the seafoam,just fill the tank with gas and go

I see so many people let gas sit in a motorcycle, THEN worry about why it doesn't run right after the fact. Seafoam is not a fix-all cure to clean carbs. Only sometimes does it dislodge a fine piece of dirt out of an orifice or clear things up if they're not clogged up too bad. You are better off to use it BEFORE the problem happens. If you plan on letting a bike sit a long time, just add the suggested amount to the fuel (1 oz. per gallon I think) and run it so the mixture gets thru the carbs, then shut it down and shut off the gas (make sure the tank is also full to prevent moisture from entering) Seafoam is also a gas stabilizer for over the winter months too! So do it BEFORE the gas goes bad and it will start right up in the spring. I've used it instead of Stabil and it works better. I also run a little thru during the riding season to keep things cleared up in the carbs. It doesn't hurt to be safe instead of sorry!

Seafoam doesn't remove dirt, sand and rust, just most of the varnish. It isn't a shortcut once dirt gets in your carb... as you saw for yourself when your float valve stuck open. You want it to run? Take the carb out and clean it properly.

Me: meanwhile dumps can into whole tank, blows up flies 20 feet into my neighbors yard

fuel tank crap will all go in carb now also from cleaning with that stuff?

Good video. Not sure about recovering Seafoam vs just adding gas to the remaining Seafoam. But it’s you’re Seafoam! And I liked your video!

I used this so any times - boats, saws, bikes..... I do additives in fuel for diesels - makes a big dif... plus those f--n tailgaters back off more respectfully ! I am guessing while watching this - it WORKED !

2:32 Dog comes up and looks at you how the majority of people are watching this video

It only blows white smoke when you run it through a vacume line with the engine running. I run about a half can right into my cb750 tank twice a year to clean everything out, no smoke, it doesnt work that way.

We had a 84 Gold wing ran the whole can mixed with fresh gas... Cleared up any issues.....

He lost me after "I sniffed it"😭😭

Where is the doobie?! You and your dog have the munchies!

Those safety mandles and socks 😂are too much!!!!

Anybody ever try running a tank or 2 of E85 through a dirty carb'd bike? I did this to my car and it stopped the sputtering and helped improve fuel economy when I ran reg fuel through it (was a 2002 crown Vic)

My carbs are dirty(1996 Kawasaki Vulcan 1500) can I preform this action before/instead of getting them cleaned? Trying to save a few buck..plus I know nothing at all about bikes..please help

I’ve got a 2015 raptor 700R fuel injected atv. It set with over 1/2 tank of fuel for a year and a half. I’ve changed the oil, filter, and charged the battery. I also drained the old fuel. Would adding a little sea foam to the new fuel work? I have been trying to read about how to best go about getting it up and running without causing damage. It’s only set for 1.5 years. Any advice would be greatly appreciated. Thanks.

Will a 800 carb fit on a1400carb

i dropped the lid from the sea foam bottle right in my gas tank

This maybe a stupid question but why didn't you just put equal measures of Seafoam and fuel on a low tank and just run that mixture through until you needed to fill up the tank? Surely that would have been much easier with no tools required!!

The can has directions dude lol I use it for years now lol

What kind of seafoam? Thetes like 3 diff cans at the autopary store.

What if ur bike won't start

88 honda 1100vt was gonna change plugs each cylinder a plastic guard around how do i get out so i can change plugs

why cant folks just do the sea foaming per the instructions. mix with gas, run it, might take a couple tanks worth. no where does it say put 100% into the float bowls, let it set awhile, rev it a few times then say it doesnt work.

Buddy got high as a kite...😂

1 oz. per gallon

maybe open the gas cap so there`s no vacuum restriction when draining gas tank

what about just keeping it simple by just adding the whole can of seafoam into a full tank of gas and then just riding normally letting the seafoam just do its work with a full tank of gas? I have a Honda VTX 1800 C, and I don't really feel like taking off the gas tank disconnecting the fuel line and doing this whole complicated procedure. It's also worth noting that my bike is fuel injected so I'd like to keep things simple and just added in. I haven't done it yet, but I will check in and let you know my results.

I have a cold start issue. Took apart my carbs and fully cleaned it, should i try this or is this useless?

Dude you're stoned

Cool videos bro I'll be doing this to my 85 Virago, any suggestions?

I have a 94 shadow I bought off my buddy today for 300 bucks. Starts and runs but when I give it full throttle it bogs out real bad forcing me to shift early thru pretty much every gear. Would seafoam help this? I think my jets are clogged but I don't want to have to take the carbs off if I don't have to.

Dude, you look like WUANT a Portuguese youtuber.

Does Vteck kick in w seafoam?

Um why not just run the seafoam directly into the carb and hot soak it?

so do I need to use seafoam or can I use something similar to it instead?

My baby brother adds Seafoam to regular unleaded gas to use in his boats and jet ski's instead of paying more for the Marine Gas without ethanol. During a freebee warranty check-up on my car, the mechanic said I needed a $35 fuel line clean out because of the detergent build up (cheap gas), I said I'd need to talk to my brother, first. He recommended Sea Foam, whole bottle, full tank. So far so good, the gas mileage is back up the 5 mph it had dropped, and I certainly didn't pay $35 for the can.

from what I've read it works better if you start it to suck the foam into the carbs and then shut it off and let it soak overnight and then burn it off.

Subbed

So is the sea foam worth buying to just sniff?

Did you say sea foam or seat foam?? ... :)

If it idles and runs fine going down the road the carbs don't need cleaned. A hesitation from sudden throttle is usually an adjustment is off.

Would this work with a kawaki klr 650 08 gen 2 ?

What if my gas is old?

Help I have a yamaha virago 98 125 The problem is that when ever i want to start it i would have to run start(bum start) it.... it just wont turn over when i pres the starter button... i just replaced the battery and it stil do the same thing... when it runs it runs fine (some hicups) and some times it shut off ) Any ideas of what i could be? I think it's either tje caburator ore the starter relay.....

good video. I see you had a vicious pitbull almost attack you. lol.

tune in at 2:30 for dog.

🤣🤣🤣🤣 you sniffed it a little bit.

I wasn't watching it, but I heard him say he had been sniffing it. THIS IS YOUR BRAIN ON CHEMICALS!!!

Does this work on a atv ?

I guess that’s what Duck Dynasty family member would. Or you could just read the label, would be much easier right.

Pale oil, Naptha and Isopropanol.

Used it every 2-3 tanks....carried in pouch.

what kind of bike is that?

Puppy dawg :D

I think she got ripped off lmao

are you sure your a mechanic ?

2:33 bruh?1? no

You used to see phone wrong why did you take it out you should have driven the bike with the seafoam in it

You look like the guy from bloodsport. OK USA

Haha, spent just as long doing this as it would’ve taken to clean the carbs the right way. Smh

Seafoam eats through seals if not diluted.......why not just drop the float bowl and clean the needles?

Why dont you just put a whole can in yr tank n ride the thing instead of draining it

I was told not to use seafoam. That it would gum it up

its like any fuel additive just leave it in there and ride the bike it will work fine

im surprised the bike starts with just seafoam. my dirt bike won't

Put seafoam in then ride it around don't just let it sit and idol that doesn't fully clean at idol temp

See foam is too dry,i heard the difference in the noise,it went from Normal to dry,that time you ran it was not long enough,i would have put lucas gas treatment.I have a carb on a scooter,65000 miles and i never have cleaned it.My scooter still starts right up

I've heard seafoam is not good for the engine. Anyone heard this too?

Lol don't sniff it guys lol

Dude to much hype an work an chanceing a Fkup...you dump it in the fuel tank an go run that tank out on a long ride...Bingo seafoam works

I'm not impressed, if you are going to seafoam them do it right, drain bowls , measure content, bypass the tank ,add that much seafoam, let it sit 24 hrs, drain bowls again, add fresh gas via bypassed fuel tank run bowls empty, repeat seafoam soak, sit 24 hrs, empty fuel tank, put fresh gas, remove air cleaners run as you spray a half of can of seafoam directly into carb throats, unless your trying to pass the bike off to some unknowing chica

I'm a mechanic I cold rev motors 🤦‍♂️

I was gonna try that but someone sniffed all the seafoam ! I'll have to get another case ! oh thats a Honda anyway, so not a biggie 🤣

need some marvel mystery oil in the crankcase also....

Huh.....

I... Have... A....... Petcock for you.

Maybe you should have just used it like the directions say. Some people are morons. Seafom works great when used correctly. Doesn't always work, but if it's not bad, most of the time it does the job. And the direction are clearly printed on the bottle. I have used it in years from boats, cars and bikes. Usually it gets everything ungummed and moving again.

Hope he has proper ventilation. CO poisoning will kill you.

fill bucket with sea foam dump in toilet. then go learn how to properly clean carburetors after taking them apart.

what an imagination.

Smoke dope much?!? 😂

Do it the right way doofus! This stuff works great,

You can tell this guy is sniffing more then sea-foam just look at his eyes.