7018 Stick Fillet weld
Рет қаралды 32,292
Күн бұрын7018 Stick Fillet weld / 7018 아크용접,전기용접 필렛
🎵BGM
Candyland - Tobu
Music by Tobu / tobuofficial
Music Playlist by reurl.kr/1A02CADECG
Music Provided by Tidalwave Rec:
Clarv Freedom
Track Link:
Follow Tidalwave
SoundCloud: / tidalwave_reco. .
Facebook: / tidalwaverec. .
KZfaq: kzfaq.info/love/iU6...
Follow Clarv
/ clarv_official
#welding #Fillet weld #howtoweld #SMAW #필렛용접 #용접 #아크용접
#캐나다용접 #해외용접
#전기용접 #stick welding #7018welding
@louisedouard322 Жыл бұрын
I’m 18 and stated welding when I was 17 your videos helped me through my level one welding course and I was comparable to the people that have been welding for 13 years I love these just have to work on my verticals thank you so much
@kimchiwelder8410 Жыл бұрын
Good job, Louise!👍 I will try harder to make a helpful video! Thanks for watching!😎😎
@user-hs2dt9el7j 2 ай бұрын
Thanks
@amilaudayanga1878 8 ай бұрын
Thanks for sharing your skills for us.
@SmotheredDreams Жыл бұрын
Doing fillet welds right now, but filling the entire thing up in so many layers. Used 30 rods of 7018 in class today!!! Good video, will help for next time.
@kimchiwelder8410 Жыл бұрын
Thanks for watching, SmotheredDreams😁 I hope my video helps you!😎😎
@marklance1374 4 ай бұрын
Im grade 11 strand TVL specific SMAW this video so learned how to weld fillet i like this video thank you much😊
@fernandorivas4230 2 жыл бұрын
it's a very nice looking weld job, thank you for sharing your skills
@kimchiwelder8410 2 жыл бұрын
Hi, Fernando Rivas Thanks for watching and leaving a comment! 😎😎
@GemBoyfamily Жыл бұрын
Good welding 👏👏👏👍🧑🏭🤗
@kimchiwelder8410 Жыл бұрын
Thanks for watching!😎😎
@Rohani11 Жыл бұрын
World best work keep it up brother Thanks for sharing your skills for us.
@kimchiwelder8410 Жыл бұрын
I will continue to try to make good videos for you! Thanks for watching!😎😎
@abdhulkhan160 2 жыл бұрын
More of this videos its great
@kimchiwelder8410 2 жыл бұрын
Yes, sure. more videos coming. thanks for watching!😎😎
@Mattoilers97 3 жыл бұрын
hope things are good man i'm finally going back to work
@bobsweldingtutorials3523 Жыл бұрын
God job ❤
@MarineFitter-jh7oh 3 ай бұрын
Before you start welding, are you drying first your 7018 stick welding? Or direct welding no need to dry? Because whe i use 7018 always not continuesly firing, easy for firing but not continuesly, i test with 4" pipe sch40 with 80A 5G position.
@BlueBoyChavez1993 2 жыл бұрын
Make more good job
@kimchiwelder8410 2 жыл бұрын
sure! thanks for watching!
@aarongonzalezreyes2159 Жыл бұрын
Que oscilación uso????
@vitaliimedelian4643 3 жыл бұрын
👍
@kimchiwelder8410 3 жыл бұрын
thanks for watching👍👍
@vitaliimedelian4643 3 жыл бұрын
Ok😉
@usmanaliusmanali1480 21 күн бұрын
What is the rod in mm and ampere is written
@Mattoilers97 3 жыл бұрын
What’s the camera you’re using on your helmet I want to recommend it to some of these other channels it’s so clear and amazing to see it’s so addicting
@kimchiwelder8410 3 жыл бұрын
Hi Matt! Next time I will ask a friend who helped me set up the camera😎😎
@OVERCAPITALIZE 3 жыл бұрын
@@kimchiwelder8410 what camera?
@gasperchanda5020 5 күн бұрын
What is the amp for 3.2 mm
@Mattoilers97 3 жыл бұрын
are you working through union? Looks nice 👍 getting my 2gf flux down, i like to master one before moving on
@kimchiwelder8410 3 жыл бұрын
yup! Thank you for watching😎😎
@user-nc2oj1wq8c 11 ай бұрын
nice mehran from iran
@victorevuarherhe8995 2 жыл бұрын
I am having issues with the angle of electrode for the last pass. Pls any tips. I use 45 and I end up having undercuts
@mathewoconnor2978 Жыл бұрын
To much angle 15 degrees max
@YT-User1013 4 ай бұрын
@@mathewoconnor2978Yep.
@YT-User1013 4 ай бұрын
This guy shows the angle of the third pass…kzfaq.info/get/bejne/rpiUn7eiyJ23kX0.htmlsi=Xt-7i9eevoAZyKBk
@osbaldohernandez9174 2 жыл бұрын
Now let’s see if the gages will fit it
@kimchiwelder8410 2 жыл бұрын
thanks for watching! 😎😎
@LilD1988 2 жыл бұрын
Is there a way where we u could help me out with this better
@kimchiwelder8410 2 жыл бұрын
I hope my video helped you a little bit thanks for watching 😎😎
@indiopatadediablobarbosa5337 3 жыл бұрын
are you in Alberta,?
@kimchiwelder8410 3 жыл бұрын
yes😎😎
@petersipp5247 11 ай бұрын
Show is a start/stop please. Thank you.
@monroesweldingservices6234 2 жыл бұрын
Why did you not clean all slag off before you started the second and third weld if that was a b3nd test it would cause serious problems
@kimchiwelder8410 2 жыл бұрын
You're right. If we're going to do a bending test, we have to keep it clean! thanks for watching!😎😎
@monroesweldingservices6234 2 жыл бұрын
@@kimchiwelder8410 been teaching young minds for 7 years now and did powerplants and pipeline for 20 years
@kimchiwelder8410 2 жыл бұрын
@@monroesweldingservices6234 Wow, You have a great experience!👍👍
@amilaudayanga1878 8 ай бұрын
PSI
@victorevuarherhe8995 2 жыл бұрын
I am having issues with the angle of electrode for the last pass. Pls any tips. I use 45 and I end up having undercuts
@kimchiwelder8410 2 жыл бұрын
Hello, Victor!😁😁 Assuming that the amperage is appropriate, the most important thing is the length of the arc. Try to keep the arc as short as possible! Then, if the direction of the welding is from left to right, tilt the angle of the welding rod to the left a little more! Let's hope this helps! thanks for watching!😎😎
@YT-User1013 4 ай бұрын
Your last pass should be at an angle about 15 degrees off of the bottom plate so your rod is more straight in on the top plate and not a 45 degree angle. This shows the angle of the 3rd pass…kzfaq.info/get/bejne/rpiUn7eiyJ23kX0.htmlsi=Xt-7i9eevoAZyKBk
SAOmetalworks
Рет қаралды 5 М.