KING JOINT - THE ULTIMATE BALL JOINT DELETE

Рет қаралды 29,637

16 күн бұрын

Rock Bouncers demand the strongest components possible. That is why we get rid of the upper ball joints with a Ball Joint Eliminator or Ball Joint Delete. We have had zero failures out of these products but they have one problem that we run into and that is that they wear over time and have no way to tighten up the slack. Well Jake Burkey got to thinking and designed an all new King Joint to resolve this issue. These have been in testing for quite a while now and are on all of our Turnkey rock bouncers for 2024 with zero failures.
Order your set here- www.bustedknuckleoffroad.com

Пікірлер: 68

@christophercarson4310 16 күн бұрын

It's obvious Jake builds the best buggies available!!

@BustedKnuckleOffRoad 16 күн бұрын

The crew at the shop have them pretty dialed

@purpleroadster7306 15 күн бұрын

This couldn’t have been any more perfect timing definitely running this in the buggy I’m currently building! Same with the 4l80 mount you guys just dropped!

@BustedKnuckleOffRoad 12 күн бұрын

Perfect!

@Nanan00 15 күн бұрын

Instead of bronze you should look into Nitronic 60 for the upper socket, it has some of the best anti galling characteristics in the metal world while having material properties on par with 304ss.

@bustedknuckleoffroadllc5060 15 күн бұрын

Really? Thats super cool. Ill look into it (jake)

@BustedKnuckleOffRoad 15 күн бұрын

The more you know

@smokepeddler 10 күн бұрын

Vw guy here. This would be great for vw front ends on rails and buggys

@David-yy7lb 15 күн бұрын

Man I don't know which dj deletes to get for my daily driver solid axle swap 08 dmax Dyna trac, King joint or American iron off-road deletes they all are awesome and made with high-quality material, i just don't know which one's to get🤦🏿‍♂️

@TjreifGaming167 11 күн бұрын

Just ordered a set 🤘🏻

@BustedKnuckleOffRoad 4 күн бұрын

👊

@dadge2500 9 күн бұрын

So how does this work for every day drivers like for heavy diesels the Dodge 2500 all the way up to the 4500?

@Eli1981-re5bh 12 күн бұрын

if you invert the cone area, any downward stress would only increase the pressure, making it impossible to pull through.

@wcmwfab935 7 күн бұрын

O sht you got my welder 220ic great welder. How do you like it. They have only went up in price. Have had mine 5 years or so.

@BustedKnuckleOffRoad 4 күн бұрын

Love our Esab welders

@Fk8td 11 күн бұрын

Bronze is also more of a lubricative properties. Thats one of the reason you use bronze guides in cylinder heads.

@erik61801 12 күн бұрын

man thats awesome they look bomb proof.

@BustedKnuckleOffRoad 12 күн бұрын

they are tough, no failures so far and they have been put thru the ringer

@JayRussellDuramax 14 күн бұрын

Do you guys think you'd ever invest in having your own casting for the knuckle? That way you could integrate the King Joint into the casting and strengthen the weak area without the need for a large weld. That could also let you integrate some grease fittings or something.

@BustedKnuckleOffRoad 12 күн бұрын

It just doesn't make sense money wise with the Super Duty Knuckles are so strong , cheap, and readily available.

@kevinbates5796 15 күн бұрын

Well dang. I have the old style I’m about to install and now it want these. 😮

@BustedKnuckleOffRoad 12 күн бұрын

Call the shop, might be able to work something out

@ParkWilliam-yj8bj 16 күн бұрын

Can your first style BJE be replaced with this new design?

@bustedknuckleoffroadllc5060 15 күн бұрын

At this time you could cut them out and re-weld the new ones in. We have though about making the pin screw into the old style like a conversion

@snowking171 16 күн бұрын

How do they get greased? Are there channels inside the bronze for dispursion?

@garettodd3037 16 күн бұрын

Loosen, grease, tighten

@GULIVERSOFFROAD 16 күн бұрын

i need these for a 44 or 30 i have the american iron ones but these i think would be even better

@bustedknuckleoffroadllc5060 15 күн бұрын

They make a great product if you want to keep camber/caster. If you want shear beef we have you covered

@kentpickle 14 күн бұрын

I agree, I would love these made for the JL 44’s

@wcmwfab935 7 күн бұрын

309 is the right filler for the job. What i would of used

@BustedKnuckleOffRoad 4 күн бұрын

👍

@17madracki17 16 күн бұрын

One day someone will make the pivot east and west instead of north and south. Somehow. Crazy the advancements in a short time with these bouncers

@bustedknuckleoffroadllc5060 15 күн бұрын

It really is. Innovation has changed the game in such a short time

@BustedKnuckleOffRoad 12 күн бұрын

not sure how that would work

@randy1568 16 күн бұрын

Can i run these on my superduty tow pig? are they road safe?

@BustedKnuckleOffRoad 16 күн бұрын

There are for offroad use only

@garettodd3037 16 күн бұрын

Youd lose your camber and caster settings/ability to adjust. Not worth it

@bustedknuckleoffroadllc5060 15 күн бұрын

No camber/caster adjustments. Although all the older trucks with kingpins are the same way. Are the strong? The strongest. But you may get uneven tire wear

@Jason.O379 15 күн бұрын

You could try different grades of bronze later for optimum wear. Or if curiosity What kind of material is the tapered pin made out of? Superduty stuff is the way to go

@bustedknuckleoffroadllc5060 15 күн бұрын

We experimented with bronze for a long time to find an alloy that wears slowly and is super tough. We settled on a proprietary alloy. The pin is hardened 4340

@BustedKnuckleOffRoad 15 күн бұрын

Super duty stuff is beef 🥩

@RoboDriller 10 күн бұрын

Looks like a bt40 tool holder

@xTinBenderX 15 күн бұрын

Next level BEEF!

@bustedknuckleoffroadllc5060 15 күн бұрын

They are so beefy!

@BustedKnuckleOffRoad 15 күн бұрын

Facts

@freeradical6390 10 күн бұрын

I always keep at least 3 King Joints next to my Dana 35. Just in case it blows up. :)

@BustedKnuckleOffRoad 4 күн бұрын

Smart

@DonaldBush-rz5fg 10 күн бұрын

How do we eliminate the pissy lower joint?

@RoboDriller 10 күн бұрын

Put this one on the bottom too?

@BustedKnuckleOffRoad 4 күн бұрын

No need to

@DonaldBush-rz5fg 4 күн бұрын

Please explain? Wouldn’t it be best to have 2 solid bars. I know I blow out both lower and uppers every 20 thousand miles which is only about 5 months for me

@Fk8td 11 күн бұрын

I can see why mig would fail. It’s not hot enough.