Kioti CK2610 Brush hogging trails

Рет қаралды 11,090

3 жыл бұрын

testing my new 2021 Kioti CK2610 brush hogging trails. Testing motor power under load with AC on. Had no issues with lack of power or bogging engine.

Пікірлер: 37

@stevemario98 2 жыл бұрын

Just brought the CK2610 cab thanks

@SpicerDesignsLLC 2 жыл бұрын

Congrats. Thats a great tractor.

@Truegrungelives 2 жыл бұрын

Great video, I'm installing the 3rd function on my CK2610 and I agree the instructions are useless, I couldn't figure out where to plug into power and with your help it will be a breeze..thank you!!

@SpicerDesignsLLC 2 жыл бұрын

No problem. Good luck with the install and hopefully the video will save you some time.

@brucebello2049 2 жыл бұрын

Adam sent me, great sign you made him, well done!

@SpicerDesignsLLC 2 жыл бұрын

Thank you! Thanks for checking out the channel. Hope you enjoy our videos

@SpicerDesignsLLC 2 жыл бұрын

Adding a new video next week or so. Going to be installing third function hydraulics on loader. Also going to be upgrading work lights to LED.

@SpicerDesignsLLC 2 жыл бұрын

I will be doing a couple of tilling videos soon in our garden once everything is done growing. Thanks for the comment.

@danlevesque8592 2 жыл бұрын

Looking at this as well, concerns with transmission power, my property is along the water so steep incline, do you have large hills you need to climb ? transmission power is my only concern on the tractor, other than that i dont do alot of PTO work, mostly snowblowing/loader

@SpicerDesignsLLC 2 жыл бұрын

@@danlevesque8592 the dealer told me if i went with by the 6’ brush hog with inclines it would be a bad idea. I just went the safe route with the 5’. My lot is relatively flat. The medium gear in that trans is pretty tough. You almost need to test it out to be sure ya know.

@grade-aland2388 2 жыл бұрын

Good video. Just bought a 2610 hst without cab. Will be picking it up next week. 🤠

@SpicerDesignsLLC 2 жыл бұрын

Nice! Its been great tractor for me so far. Ive done a lot of different tasks with it so far and no issues. Thanks for the comment.

@peterb.houtman1012 2 жыл бұрын

Good stuff, I just bought the CK 2610 HST. Will be next week

@SpicerDesignsLLC 2 жыл бұрын

Congrats. Its a great tractor. I will have a tilling video and 3rd function install up soon. Just working on the editing now.

@skiffintherift9179 Жыл бұрын

i just got a pto wood chipper for my 2610 it works great chews up big limbs like nothing cutting the 3-4in stuff into 4-8 ft sections makes it much smoother

@SpicerDesignsLLC Жыл бұрын

Wow that would be a great attachment to have. They seem to have plenty of power

@mikeneeley1836 2 жыл бұрын

Thinking of getting this same tractor. I have an Kubota L2501 now.

@SpicerDesignsLLC 2 жыл бұрын

Ive been very happy with it so far. The cab is great. The two are pretty similar besides the treadle pedal vs dual pedals.

@davidlangley2722 2 жыл бұрын

Is that tractor a SE model? I’ve been trying to get a 2610 SE with out a cab for 1 1/2 years now and I was told that they don’t make that model anymore with out a cab.

@SpicerDesignsLLC 2 жыл бұрын

They definitely make that model. The 2610 is theyre best seller from what i was told by the dealer. Mine is the se model. Im not sure where your located but that larry stoveland dealer always has good inventory.

@davidlangley2722 2 жыл бұрын

@@SpicerDesignsLLC I have texted them about a 2610SE with out a cab and I can’t seem to get a straight forward answer from them. I’m in south west Mississippi, where did you get your tractor and what was the price if you don’t mind me asking ?

@SpicerDesignsLLC 2 жыл бұрын

@@davidlangley2722 i got mine from an dealer called ronson equipment in westville indiana. I know they have very low inventory right now. I paid 27k for mine with the cab.

@rash0401 2 жыл бұрын

I know you've mentioned it a few times the 2610 seems to have the power you need for your use. it sounds like from your pros and cons video you (like myself) know the John Deere 1 series well. I've had the 1026R for 700 hours and since new in 2012.... how do you rate the torque/ power of the kioti compared to the deere? my deere seems to handle the 60 inch PTO blower decently... however in high range on hills it seems to lack some power. I'm currently in the market and have a plan this week to look at both the 2610 and 3510. Any suggestions are welcome. (locally we are lucky to have Kubota, Kioti, and Massey Ferguson options. ). Thanks!

@SpicerDesignsLLC 2 жыл бұрын

Hopefully i answered this in my other reply to your comment. Last thing ill say is it never hurts upgrade to the bigger motor. 2610 is there best seller from what i was told. Deciding factor for me was DEF and emissions on the 3510.

@raycordova2068 Жыл бұрын

How do you rate the power and consistency on this tractor with AC on? Thanks!

@SpicerDesignsLLC Жыл бұрын

Ive never noticed any power issues. I also found out the 2610 is a detuned 35 hp for emissions. It supposedly can be tuned up to 35hp

@darrenturner9900 2 жыл бұрын

What size brush hog were you using? 60’ inch?

@SpicerDesignsLLC 2 жыл бұрын

Yes 60”

@TacticalTuber 2 жыл бұрын

I want to see everything kioti bucket work tilling harrow drag

@SpicerDesignsLLC 2 жыл бұрын

sorry for the late response. I will have some more tilling videos and all kinds of other misc work around the property. I have some good stuff coming in the spring. Unfortunately, I do not have harrow drag. thanks for watching!

@jentrevorpitts323 2 жыл бұрын

can the doors pop off for fall and summer

@SpicerDesignsLLC 2 жыл бұрын

Im not sure on that. I would imagine they do come off. Just dont know how easy of a process that is. I just turn on the ac or open the back window

@keithowen3847 2 жыл бұрын

Nice video. Just one comment that applies to so many guys making videos of this type. When you show yourself mowing a field, it doesn't show us anything useful when you speed up the motion to 2X normal speed. We like to see the actual mowing at normal speed to get any idea of the quality of cut at the speed you are going. After all, you are making the video to inform us and a fast speeded up video doesn't do that. But I love the quality and your narration.

@SpicerDesignsLLC 2 жыл бұрын

I Understand. That was my first video i made. Theres definitely a learning curve to all this. Ill have other brush hogging videos and ill make sure to have more in real time speed. Problem is of i dont speed up some sections it will be an hour long and no one will watch. I appreciate the comment and i will continue to make adjustments.

@garymeyer3294 2 жыл бұрын

@@SpicerDesignsLLC Also, cut out the music in addition to cutting out the fast speed. We want to see and HEAR how it actually handles that much load.

@jentrevorpitts323 2 жыл бұрын

hello, do you mind the cab? or is it a pain now to jump in and out. What about the glass breaking - any issues? Are you doing forstry work?

@SpicerDesignsLLC 2 жыл бұрын

I dont mind the cab. Its definitely not as quick to jump in and out. But its really bot bad. My land is pretty open, so no forestry work. We have cold winters and a lot of wind in the summer so the cab works great for me. No issues with glass breaking. Probably wouldnt be ideal for a wooded lot. Thanks for the comment