Kitchen Cabinet End Panel

Kitchen Cabinet End Panel | How to Make

Рет қаралды 58,707

2 жыл бұрын

I needed to make a kitchen cabinet end panel for my basement renovation to cover up the end of the mini fridge. In this video I'll show you step by step how to make an end panel and all the tools and material needed to do so. I hope this video is helpful - enjoy!
📧 Join my Newsletter! - FREE Hardware Storage Cabinet Build Plans when you join! - doingwhateverweekly.beehiiv.c...
🛠 Want awesome TOOL DEALS delivered to your inbox daily? I've got you covered 👇dailytooldeals.beehiiv.com/su... (FREE gift when you subscribe!)
Tools and Materials:
Purchasing items via these affiliate links supports Doing Whatever at no extra cost to you. Thank you!
Tape Measure: amzn.to/2KUu55t
Miter Saw: amzn.to/2X20OIF
Impact Driver: amzn.to/3tDLeCA
Pocket Hole Jig: amzn.to/3qoLsKC
Pocket Hole Screws: amzn.to/3Clj05V
Wood Glue: amzn.to/3r1f83T
Brad Nailer: amzn.to/1rIsjos
Brad Nails: homedepot.sjv.io/a1YnJo
2'x4'x3/4" Plywood Handipanel: homedepot.sjv.io/MX1nBK
End Panel - Unfinished: homedepot.sjv.io/qnqDxy
Minwax Clear Polycrylic Semi-Gloss: amzn.to/3NNH3x5
Contact Cement: amzn.to/3aQVulw
1"x3" Maple Board: homedepot.sjv.io/doAKnK
4' Level: amzn.to/3MPD7dT
2 1/2" Screws: amzn.to/2FtCrsI
TOOLS:
🛠For a complete list of all the tools and materials I used in this video make sure to check out the project page -
Merch!
Doing Whatever Sweatshirt - amzn.to/3rF64ki
Doing Whatever T-shirt - amzn.to/3rF4dfd
Help grow your KZfaq channel - tubebuddy.com/freetrial?a=doi...
A tool I'm using to help grow my channel is called Tube Buddy and it helps me identify specific keywords that will help get my videos found on KZfaq. I've found it very helpful when brainstorming video title ideas and finding tags that are specific to my video.
If you're a small channel like I am, this is definitely a tool I'd recommend trying out to help kickstart your success on KZfaq - Try it free for 30 days!
tubebuddy.com/freetrial?a=doi...
🛠 The Tools I Use: doingwhatever.com/tools.html
📐+👕Project Plans and Doing Whatever Merch: doingwhatever.com/shop.html
🎥 My Camera Gear for Making KZfaq Videos: kit.co/DoingWhatever/youtube-...
🖥 My Computer Gear for Making KZfaq Videos: kit.co/DoingWhatever/desk-setup
📦I buy almost all of my project items and materials using Amazon Prime - you simply can't beat the 2-day delivery! If you want to give Prime a try, click this link for a FREE 30-day Amazon Prime trial. amzn.to/2T9rAfE
Music by: Joakim Karud / joakimkarud
Music: www.davidcuttermusic.com / @dcuttermusic
__________________________________________________________________________________
🖥Check out my website! - doingwhatever.com/
🖥Check out some of my downloadable plans:
Gumroad - gumroad.com/doingwhatever
Etsy - www.etsy.com/shop/DoingWhatev...
📱Follow me on Pinterest! - / doingwhatever
📱Follow me on Instagram! - / doingwhatev. .
📱Say Hi to me on Twitter! - / doingwhateverry

Пікірлер: 57

@allysonlleatherwood 10 ай бұрын

I was debating how to install a dishwasher end panel, and this seems like the logical option. Thank you!

@DoingWhatever 10 ай бұрын

No problem! good luck with the build!

@hilarief6590 Ай бұрын

Thanks for a VERY well done project and clear/ concise video. This is exactly what I needed. Nice work and thank you!

@Benmeglei1 6 ай бұрын

Wow dude. I can’t belive you placed that panel over the contact cement so fast and flawlessly. I normally take my time with that cuz if it’s not aligned properly you aren’t undoing the binding. Nice job. Cheers.

@DoingWhatever 5 ай бұрын

lol I hear ya, I guess I got lucky on this panel! 😃

@annamuldoon6644 Жыл бұрын

Great, direct, easy instructions without a lot of filler. Thanks!

@DoingWhatever Жыл бұрын

Glad it was helpful! Thanks for the kind comment!

@prestonawood Жыл бұрын

Was looking for something simple and effective. This was exactly what I needed. Thank you!

@DoingWhatever Жыл бұрын

Awesome, glad it was helpful!

@SpiderEternal 9 ай бұрын

Thanks for giving me an idea of how this all looks. Never done it before and this helped a lot!

@DoingWhatever 9 ай бұрын

Glad I could help!

@ncsteinb Жыл бұрын

Thanks for the detailed explanation. Very helpful!

@DoingWhatever Жыл бұрын

Awesome, glad to hear that!

@gordonholland3406 Жыл бұрын

Hi! Great videos. I’m looking to do a similar cabinet/sink type bar in my basement and would love to see more about the rough in plumbing/cabinet build and install. Maybe during a future project…but you do a great job explaining and showing how to do things-your sink install video is great! Thanks, Gord

@DoingWhatever Жыл бұрын

Thank you so much, I really appreciate it!! I will keep those video ideas in mind for next time! For the rough in plumbing, I hired that out because I was behind schedule. The cabinets I bought unfinished at Home Depot and then stained and finished them to match the rest of the cabinets in the house. For installing them, especially the upper cabinets, it’s so much easier if you have blocking in the wall ahead of time. Then you don’t have to worry about finding a stud, just screw to the blocking and you’re good to go. I installed blocking when I was framing the walls and it saved so much time!

@christianjagot2162 Жыл бұрын

Great video! I even purchased some of the tools used through your links.

@DoingWhatever Жыл бұрын

Awesome, thank you! I really appreciate that!

@KodakYuKnwDat 2 жыл бұрын

Just found your channel and I love your content! Your format of video and explanations are perfect 👍

@DoingWhatever 2 жыл бұрын

Wow I really appreciate the kind words 😃 thank you!

@Babak.Abdehagh 3 ай бұрын

Nice Job!👌

@halfdohm Жыл бұрын

Nice clean job.

@DoingWhatever Жыл бұрын

Thank you! Cheers!

@jamesroseboro2764 5 ай бұрын

Nicely done sir!

@DoingWhatever 5 ай бұрын

Thank you! Cheers!

@thegardenladyandmrgnome8002 2 жыл бұрын

Great video. Thank you.

@DoingWhatever 2 жыл бұрын

Thank you, I appreciate it!

@dakotamizell5235 3 ай бұрын

Just the video i needed!

@DoingWhatever 2 ай бұрын

awesome, glad to hear that!

@mardakworkshop4450 2 жыл бұрын

well done 👍🏻👍🏻👍🏻

@DoingWhatever 2 жыл бұрын

Thank you!

@AbdulrahmanLehyani 2 жыл бұрын

love it !

@DoingWhatever 2 жыл бұрын

Thanks 😃

@arinpounov369 3 ай бұрын

The bottom corner doesn’t kick out? I usually place a small angle bracket (L-bracket) there but hate putting a screw into the floor.

@DoingWhatever 3 ай бұрын

If you kick it, it moves a bit but not much. I didn’t want to put a screw in the floor either lol

@moomarkel Жыл бұрын

Think this is going to work as an end pannel for our dishwasher we just installed. We don't have a pocket hole jig though. We may need to use L brackets or something. 🤔

@DoingWhatever Жыл бұрын

I don't see why it wouldn't work for your dishwasher end panel 😃 L brackets would probably work fine - I have a link to the pocket hole jig in the description of the vide, I think it's about $18 if you decide to get one.

@jckdnls9292 11 ай бұрын

When yiu get this as part of a kit, it comes with a tiny bracket to be installed on the front bottom, because there's no stabilization there

@jeffmilla4505 8 ай бұрын

Can I get with 1/2” plywood for cabinets?

@DoingWhatever 8 ай бұрын

1/2" would probably work as well. the cross members will help stabilize it also.

@ydavis9449 Жыл бұрын

I’m trying to install a fridge that’s taller than my base cabinet. Would you mind telling me how to do so? Was thinking about adding wood under the base cabinet to make it a little higher.

@DoingWhatever Жыл бұрын

correct, you could raise the base cabinets up using a frame underneath them. you could make that out of 2x4s - probably the easiest way. you would end up with a taller toe kick, but it might not be the end of the world

@mingyuanxu2130 Жыл бұрын

Are the screws in the video recommended below? Seems to be silver

@DoingWhatever Жыл бұрын

The screws listed at the very bottom are the ones used to attach to the wall - I just added the silver screws (pocket hole screws) to the video description that I used in the pocket hole locations to connect the stretcher pieces. thanks for noticing that those were missing from the list 😃

@dawnlifrieri8817 Жыл бұрын

did you have any issues with the fridge ventilation? Im thinking of doing this, however the "under counter" models are so much more expensive, but I'm worried about the fridge overheating in an enclosed location

@DoingWhatever 11 ай бұрын

I haven't had any issues with ventilation. there's about 4-5" of clearance at the back and then clearance on both sides so the fridge can "breath". Hope that helps!

@ydavis9449 Жыл бұрын

Can you show us how to install the counters?

@DoingWhatever Жыл бұрын

I had the company that made our countertop install it since that was "included" with buying the countertop from them. Essentially, install the base cabinets and get those as level as possible (something else I should have filmed). once the base cabinets are installed, what they did was basically glue the countertop onto the base cabinets (using a construction adhesive in a caulk tube) and shim as needed. If I ever install a countertop in the future I will be sure to film it!