I know its not glamorous but these kitchen cabinet hinges can be confusing so I run through some kitchen hinge basics.
Пікірлер: 219
@MixingGBP Жыл бұрын
Even in 2023, this is still useful information. This was my first time installing these on a custom cabinet I made from scratch. Worked great and the adjustability gave me a perfect gaps and lines.
@JohnGodwin4 жыл бұрын
Jesus Christ, I've been researching these hinges fr days. All I wanted was a video that said "this is what the hinges are", and "this is how you fit them". This is the first video I've come across that actually explained it. Much appreciated!
@bnelson313braveheart8 Жыл бұрын
I’m tasked with realigning almost all of my kitchen cabinets now. They were installed 18 years ago. Thanks for sharing your knowledge!
@luket46786 жыл бұрын
Hi Joey, wanted to thank you specifically for the tip on installing inset hinges, without the proper hinge, which is exactly what I needed on one of my projects. As always, great work. Take good care.
@HBSuccess6 жыл бұрын
Just found this two years late. Great information. I've been building cabinets for 40 yrs, but always faceframe with conventional hinges. The high-end custom mnfcts (that I compete with...picking up the crumbs) are now using a very clever combination of frameless and framed components and every combo of concealed hinge you can imagine - it's been a steep learning curve. In my experience Blum does kill the competition - better built and more innovative- you can almost always find a hinge that will fit whatever you're trying to do. That said, I'm still learning and discovering new ways to do things.
@eketelon5 жыл бұрын
Joey this is the best and easiest to understand videos on these hinges that I've seen! Thanks a mil for making it so simple to understand!!
@kirm81377 жыл бұрын
Excellent video! Very comprehensive. I'm just fascinated by the incredible engineering that goes into these hinges. They really thought of everything and allowed a lot of tolerance.
@luke54hd536 жыл бұрын
Hugh Jazz e
@joseluisorbegozo48136 жыл бұрын
I'm ready to install my first set of hinges. This video is very informative. Thanks for the tutorial.!
@kathydentinger31764 жыл бұрын
Just watched your video to fix a hinge that was preventing the cabinet from opening all the way. Thanks so much. Saved me a fortune.
@alexhemming70605 жыл бұрын
Made a makeup table for the wife, needed some help with the hinges for the doors. This video was superb help! Thanks!
@archangels4you5935 жыл бұрын
Love your Videos, Joey!! Thanks for sharing your knowledge and wisdom.
@christschool7 жыл бұрын
This is the best instructional video on using these hinges I've watched. Thank you.
@akquicksilver7 жыл бұрын
Great explanation and demonstration! You just answered a lot of my hardware questions. Thank you so much!
@ChrisSamuels7 жыл бұрын
Thanks for the great introduction to kitchen hinges, and just at the right time for my project.
@lgude3 жыл бұрын
Excellent video - completely cleared up all the gaps in my knowledge - even tells me that 18mm thick doors will work and also how I will have to modify my existing carcass to accomodate these hinges.
@terryhoppenthaler81936 жыл бұрын
learned more in 5 minutes watching video than trial & error in past30 years. Thankyou!
@rayorockon6 жыл бұрын
Thanks for the easy explanations - makes sense of it all now.
@hinteriors3894 жыл бұрын
This is the best explanation for 0 degrees and 8 degree concealed hinges. Thank you.
@charliedalmasso46727 жыл бұрын
nice instructional video and.... nice T-shirt ! May the kitchen hinges be with you !
@MarkSmith-cd2bx5 жыл бұрын
I'm not feeling the kitchen hinges line, should have 'used the Forks' charlie, Use the Forks.........( mine is worse than yours, best wishes)
@richardfletcher98313 жыл бұрын
hi Joey just wanted to say a big thanks this video has been a huge help as I am changing the doors in the kitchen in my new house and you have just saved me a fortune. big thanks Richard.
@stvbrwn87 жыл бұрын
I love those hinges- easily adjustable and with the clip-on attachment you can even make them soft close.
@veganvendetta01875 жыл бұрын
Wow thank you sooooo much! The instruction that I had were less than useless. You just saved me so much time
@MarkWiddow6 жыл бұрын
Crystal clear just what I needed - look forward to some other vids - Thanks BigTime
@hogster1604 жыл бұрын
I couldn't get my medicine chest door off of my new one, this allowed me to take it off and install a new cabinet! Thank you so very much!
@cobberpete17 жыл бұрын
I've used the hinges for years but never thought about the story stick. Thanks Joey
@snorkherder4 жыл бұрын
I'm about to build my first kitchen from Scratch your vid is great and has really help me decide on how I want to fix my hinges, thank you :)
@kevinrtres4 жыл бұрын
Excellent content! Thank you very much for the hard work to produce it.
@jbb54704 жыл бұрын
Just came across this video. Took a lot of confusion out of the placement of these hinges. Thanks again!
@phumblaiselutin90824 жыл бұрын
Thank you very much, with your help we were able to fix a broken cabinet door.
@rossmerchant18327 жыл бұрын
Thanks Joey, good overview and some helpful advise.
@maehay40657 жыл бұрын
Thank you very much I have not had any experience with different type of hinges or types of screws either so really great help for us folks that are just beginning to want to learn the basics. You did a wonderful job explaining about this particular hinge. I had know idea there are adjustable hinges.
@KingPostTimberWorks7 жыл бұрын
cheers
@solsdadio5 жыл бұрын
Cheers. Well paced with great descriptions.
@theftworthrealtor3 жыл бұрын
Great info, only video I have been able to find that explains more than just how to drill the 35mm hole...many others briefly discuss overlays but for the life of me I could not find any info on which plate I needed for full or half overlay...now I can order the hinges and plates online without being overcharged by a retail outlet...thx so much!
@Pip7-px3wq4 жыл бұрын
Brilliant, straightforward information, thank you from Suz in Australia ⭐️👌⭐️
@nzkgb14867 жыл бұрын
Wow i needed you last year when i had a broken hinge........bloody M10......thanks for posting
@stevebulach51987 жыл бұрын
Hey Joey, Very informative, I've been playing these style hinges, but are about 20 yrs old. The ability to make the finer adjustments on the newer hinges is awesome. I think I'll lash out & buy the newer hinges next kitchen reno I do :) Thanks for the Vid. cheers Steve
@KingPostTimberWorks7 жыл бұрын
cool , glad to help
@markgrindrod56687 жыл бұрын
Great video, just what I was looking for. Great information and explanation.
@KingPostTimberWorks7 жыл бұрын
+Mark G glad to help
@jayantharanjith22737 жыл бұрын
KingPost TimberWorks d
@smpnegeri30buton596 жыл бұрын
Nice&god job I will trying
@juanrivero87 жыл бұрын
It might not be a Sheraton chair, but that was extremely useful and informative. I had no idea of the basics, although I have put in dozens of conventional hinges. I had no idea there were so many types, much less that there were half-coverage and full coverage, and that these things can be adjusted. Thanks very much!
@KingPostTimberWorks7 жыл бұрын
cheers
@jasonmartin84675 жыл бұрын
Great video description! well done and very thorough. Thanks for posting
@birjusharma71115 жыл бұрын
Hii
@waheedhs4 жыл бұрын
Amazing! most simple and precious explanation, Thanks for your efforts
@leadinganunleashedlife26153 ай бұрын
Awesome video brother, thank you. It helped me solve my uneven door issue. I was wondering what that 3rd screw was for. Didn't know it was that simple to raise the door 🫣
@markprochaska67566 жыл бұрын
Great info. Keep up the great work!!
@keltheb2 жыл бұрын
Thank you. The story stick will help me greatly. I'm mounting a very heavy mirror (30-40 lbs) & will use multiple hindges and was unsure how to get accuracy for the carcass portion for mounting.
@salenakabobby-flowermen Жыл бұрын
Thanks bro, I'm to install these hinges and your tips helped a lot.
@jtrent907 жыл бұрын
really useful video, i've used the 'easy hinge' type kitchen hinges before but knowing how to use would be handy as they're much more versatile
@juginstr10197 жыл бұрын
Thank you for your lessons.
@FranksDIY7 жыл бұрын
I've been using these hinges for a while now love them. Took a few tries to adjust them but once you get the feel for them they are great.
@alexramsey46185 жыл бұрын
Thank you for sharing... all the best mate!
@rodneyclooney14 жыл бұрын
grateful sir.. i was hunting for vdo to fix my wardrobe hinge which had flipped open and could not be put back.. thx fr your super video unscrewed the separated part on other side first flipped it back in the other part and then screwed the other part flush on right position again
@gregkieser11575 жыл бұрын
Thank you - super helpful. Now I’m off to the garage to attempt hanging my first doors.....cross your fingers.
@7tracey75 жыл бұрын
That was really helpful and easy to understand! Thank you. Still not exactly the right hinges for my project but still really helped. Anyone know what sort I need when although the door is full overlay.. hard to explain!.. there is a frame within the cupboard that is only 2 cm wide to attach the bit that would normally attach to the carcus?...
@jimp16466 жыл бұрын
Great information. Thanks for posting this.
@vinhoi695 жыл бұрын
Thank you very much Joey, very useful for beginner like me
@johnfrancis22277 жыл бұрын
Thank you - very informative.
@quentinsherratt79695 жыл бұрын
Very very informative 💯🎯thank you!
@checkyoself94 жыл бұрын
So we're not gonna talk about his awesome T-shirt?! :) I came for the hinge talk; I liked for the fashion.
@falconfree77575 жыл бұрын
Thanks very helpful and easy to follow.
@jesperrub3 жыл бұрын
THANK YOU, Joey!!! This was incredibly helpful...:-)
@meansambath6 жыл бұрын
That's great, thanks for your sharing.
@Digmen15 жыл бұрын
Hi from Tauranga. very useful video thanks
@cathiotirobaf16803 жыл бұрын
Thank you, thank you the half covering information was exactly what I was looking for. Can any full overlay hinge be adjusted to only cover half of the frameless frame?
@williamwilson65787 жыл бұрын
Great info! Thanks
@agcala96195 жыл бұрын
Thanks for sparing us the musical introduction
@sanjaysami43156 жыл бұрын
Thank you ! Much appreciated !
@jazzyjono5 жыл бұрын
Great work my Kiwi friend from the UK.....
@ARCDesigns6 жыл бұрын
Thanks very much. Great Video.
@michaelbayly51666 жыл бұрын
Exceptional content very informative....
@sebastiaanstoffels75656 жыл бұрын
Awesome Vid. Super helpful!
@cygnus108 Жыл бұрын
Brilliant explanation.. many thanks for posting
@johnmclean97304 жыл бұрын
Awesome, I got what I came for inside the first minute!
@CF...5 жыл бұрын
Really helpful video thanks 👍
@SimopsAus7 жыл бұрын
Hi Joey.....I know of these hinges as Euro hinges here in Aus for frameless cabinets. I think in the US they tend to like using face frames for cabinets and so use more conventional hinges........you are right they are pricey at Bunnings/ mitre 10 but I tried buying from a kitchen supply place and as I wasn't in the trades weren't interested in selling to me.......go to Bunnings was their suggestion!!! Enjoy your tutorials....cheers
@KingPostTimberWorks7 жыл бұрын
SimopsAus hi, yeah the Americans seem to like there face frames, seems like more hassle than framless. admittedly I will buy from bunnings when I need 1 or 2 things. anymore and I'll order it. if you have a big order (for you) and tell them your a furniture maker they'll most likely give you a cash account .
@berthatton94107 жыл бұрын
Thanks, that was very helpful
@MistaRat Жыл бұрын
Thanks mate. Good info. Cheers from Timaru!
@SuperKwame17 жыл бұрын
Thanks very your great tutorial
@Desi_d7j6 жыл бұрын
Very Good video. Great job, Thanks
@KingPostTimberWorks6 жыл бұрын
+meechu633 cheers all good
@bogdanipbv19894 жыл бұрын
Great video! Big like! 👍👍👍
@skoods13 жыл бұрын
Thanks, Joey! Just had to remind myself what's what with these from Queenstown NZ .
@chrisdunn10283 жыл бұрын
Nice job mate, thanks.
@willtaylor89266 жыл бұрын
What degree overlay hinges would i need for a diagonal cupboard so that the doors open out enough?
@daryldwarika11776 жыл бұрын
Excellent explanation.
@benadewole127 жыл бұрын
Brilliant well explainied, Ill book mark as a reference
@r1819m17 жыл бұрын
Great video again. same story about the price in the US. hope your planning on putting out a video on the cabinets they look nice.
@KingPostTimberWorks7 жыл бұрын
no vid for this kitchen, but ill be showing one coming up very soon. cheers
@davidclarke53137 жыл бұрын
Thanks Joey, that was useful clarification. Do you have a recommendation for which order to do the adjustments to the hinges once the door (or indeed pair of doors) is mounted?
@KingPostTimberWorks7 жыл бұрын
its all about the gaps between doors, if that does not look good . it all looks bad. then you can fiddle with the other adjusments .
@xw69687 жыл бұрын
Could you show how to make the installation tool for the hinges?.
@Cadwaladr7 жыл бұрын
When I was in cabinetmaking school I learned how to use those hinges, but I never liked them. My favourite cabinet hinges are Youngdale hinges. I dunno if they get much use outside of the US, but I love them because they're cheap and easy to use, you just cut a 7mm slot on the back of the door and then screw them in.
@KingPostTimberWorks7 жыл бұрын
Cadwaladr haven't heard of those , I don't think there in NZ but I'll check them out Cheers
@drmkiwi7 жыл бұрын
www.youngdale.com/Hinges.html
@jhgosnell5 жыл бұрын
My door fell of the mounts and I cannot get it back on.....
@blinkerfluid47127 жыл бұрын
great analogy on how the big stores rip us all off i dont know how they get away with it.
@WasimBarri6 жыл бұрын
Great video and perfectly explained, just what I wanted. I'm from across the Tasman and not a tradesman but a keen hobbyist and don't have access to trade prices. Any suggestions as to where to buy these including the template. Thanks again for a great demonstration
@KingPostTimberWorks6 жыл бұрын
Bunnings will probably have what you need. Just a bit more exspensive
@christelle45644 жыл бұрын
Perfect video !!
@moomoopuppy58106 жыл бұрын
May I ask what those plastic "anchors" are called. It seems after a while my screws end up loosening and nobody here checks on them and they/the door end up getting leaned on and the threading from the wood side gets damaged and the screws fall out and get lost. I was thinking of just filling the holes with the missing screws with epoxy and replacing the screws.
@dawouddawit79456 жыл бұрын
Thank you
@rallinhayles47886 жыл бұрын
hi when making double doors how much do i minus for these inches
@izudeldam31646 жыл бұрын
nice video. can anyone tell me whats the name of that first hinges?
@rogercarroll1663 Жыл бұрын
this is the best. thanks.
@imstubby68444 жыл бұрын
Thanks so much very helpful
@judythomas56162 жыл бұрын
Great vieo and very detailed
@hobbs34244 жыл бұрын
Good vid bro,thankyou.
@jerryhoover48604 жыл бұрын
Your a great teacher
@seasonedtoker4 жыл бұрын
For euro hinges it is pretty simple. The hole in the door is 35mm in diameter, 12mm deep, and should be 5mm from the edge (or 22.5mm if measured from edge of the door wing to the center of the hole). The cabinet part is even simpler. Holes are 5mm diameter, 32mm apart and should be 37mm away from the edge of the cabinet side edge.
@KingPostTimberWorks4 жыл бұрын
This is totally not always the case, there are so many different types of hinges and relevant drilling positions that this generic simplified information is not really helpful unless you specify which hinge and type you are talking about.